Corrupt WMV files

I have Photoshop Elements 8 and Premere Elements 8. I have created a slide show with various music clips. The slide show is about 25 minutes long. After completing the slide show in Elements, I went to output and selected burn to DVD. It then opened Premere Elements where it created a WMV file. This is where the problem occurs. I have tried many times to successfully create the WMV file and every time it either deletes some of the music or skips one of the slides leaving a black space. Each time it is a different type of corrupt file. I go back to Elements and check to make sure the source file is still good and it is. I have also had problems where I have created a successful slide show in Elements and saved it and then opened it the next day to find half of the music gone. That has not been the case however, when the WMV files become corrupt. I would appreciate any information on the cause and how to remedy this problem as well as the problem where my source file deletes some of the music when I reopen it in Elements.

Try creating the slideshow with Premiere Elements.There is an option to do this in Elements Organizer

Similar Messages

  • QT10.1 will not open .wmv file after upgrade to 10.7.4

    Hi Qt 10.1 will no longer open .wmv files after upgrading to 10.7.4.  I have the latest version of flip for mac.  They will opwn in QT7 pro but does anybody have a fix for this problem at all?  Thanks in advance. 

    I'm having the same issue, but do not find a 3ivx codec in the mentioned QT folder.  I do, however, have these codecs listed in that folder:
    AppleGVAHW.component
    ApplePiletVideo.component
    AppleProResDecoder.component
    AppleVAH264HW.component
    QuartzComposer.component
    QuickTime3GPP.component
    QuickTimeComponents.component
    QuickTimeFireWireDV.component
    QuickTimeH264.component
    QuickTimeIIDCDigitizer.component
    QuickTimeImporters.component
    QuickTimeMPEG.component
    QuickTimeMPEG2.component
    QuickTimeMPEG4.component
    QuickTimeStreaming.component
    QuickTimeUSBVDCDigitizer.component
    QuickTimeVR.component
    Could ANY of these be causing my wmv files (or my Flip4Mac) to be corrupt and unable to work?  I appreciate any insight you may have.

  • Can't open WMV files in Quicktime. How can I reinstall Quicktime?

    For some reason I am unable to open WMV files in Quicktime even though I have Flip4Mac Player Pro (WMV files played fine in Quicktime until recently).
    ANY help would be GREATLY appreciated!

    Quicktime X is a great little piece of software. However, Quicktime X is very finicky on which codec/file format it can decode/play.
    Luckily, there are DOZENS of alternative video/media players and extensions available for the Mac. Some of them are even FREE. Some of the better FREE ones include...
    PERIAN (quicktime extension)
    http://www.macupdate.com/app/mac/22923/perian
    QUICKTIME 7.6.6
    http://support.apple.com/kb/DL923
    VLC Media Player
    http://www.macupdate.com/app/mac/5758/vlc-media-player
    NICEPLAYER
    http://www.macupdate.com/app/mac/15136/niceplayer
    ... And if none of those work, there is a possibility that, that video file may be corrupted.

  • Playing wmv files in Quicktime Pro

    I really want to play wmv files in quicktime. I read that quicktime pro should be able to do so. I have quicktime pro but nether Quicktime Player X or Quicktime 7 Pro can open it, and I know the file isn't corrupted cause it plays on a windows computer. Please help

    You need to install Flip4Mac to play unprotected WMV files. WMV content which contains DRM can't be played in Mac OS X.
    (50939)

  • Can't open .wmv file

    Trying to open/play .wmv files; I have the latest version of flip4mac installed and appears to otherwise be working fine. These files do have the .wmv extension, however when I click on them to play/open I get the following message "the movie/file could not be opened. The movie/file is not in a format that QuickTime Play understands".
    thx
    Mike

    I'm able to open on PC at work, so I don't think that would happen if files were corrupt. How can you tell what codec version they were encrypted with? I checked in "get info" to verify file ext type and they are .wmv.

  • I'm using CS6 Design Web & Prem.  When I use Media Encoder to convert WMV file to FLV the top portio

    Hi,
    I'm using CS6 Design Web & Prem.  When I use Media Encoder to convert WMV file to FLV the top portion of the video is not visible.  How can I fix the issue?
    Thanks!

    It's a Windows Update bug:
    WMV files corrupted on import or export
    Mylenium

  • Encoder Options For *.wmv Files re Premiere Pro CS5.5

    Hi,
    I have a collection of *.wmv files that Premiere Pro CS5.5 refuses to open and it always generates an error message so I need to re-encode these *.wmv files into a format that Premiere Pro will import OK. I know that Premiere Pro will open *.wmv files so I think that the ones I have must have some data structures slightly out of normal. The files actually play with VLC and open with Sony Vegas so they are not corrupt.
    What I hope to do is to use an encoder that will re-encode the files without any loss of video quality into another format or even into a slightly renamed *.wmv file in the hope that the re-encoded version of the *.wmv file will then be palatable to Premiere Pro.
    Would anyone please be able to recommend an encoder that is suitable for my needs? On a final point, as a total novice with video, what aspects on re-encoding would cause loss of video quality or is there no loss of quality when re-encoding? Apologies for such a dumb question but I really am a newbie to all this.
    Rgds

    If you can get the files open with Vegas, you could probably export them using Lagarith Lossless Video Codec or Ut Video Codec Suite, both of which are lossless AVI codecs that work nicely with Premiere Pro. PPro needs the 64-bit version, but I don't know enough about Vegas to know if you need 32-bit or 64-bit, so just install both. Note that the files will be much larger, but will not suffer any perceptible quality hit.
    I'm not sure of any way to do a WMV rewrap--I'll see what I can find.

  • Media Manager Can't See WMV file

    I installed Verizon Media Manager and I have a family video created in Windows Live Movie Maker that is a WMV file. Media Manager did not pick it up in a scan and when I tried to add it manually, I got an error that said I'm trying to scan a corrupt or unsupported file format. I also converted the file to an AVI and got the same error. All files play on my computer in Windows Media Player with no issue.
    Video originated off a Canon HD video recorder.
    Any ideas? Would really like to play the video on my TV.

    If some AVI's are playing, then its a problem with Windows Movie Maker program and how it exports. I am sorry that our program will not meet your needs.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • I uploaded a .wmv file in Premiere Elements 8.0 but it does not show up right in the timeline

    x

    Here is that ANNOUNCEMENT:
    ANNOUNCEMENT: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
    Hunt

  • Sudden difficulty importing wmv files

    Hi, I'm using a trial version of CS4, am under the gun, have strong working computer knowledge but limited technical knowledge, and am new to video editing. But I had a great guy teach me the basic ropes of video editing in CS4 and I'm doing a pretty great job of creating clips from downloaded wmv files and have about 7 clips of 12 done for a presentation I need to deliver today. Suddenly, however, I can't get the final wmv file to load into Premiere. The only difference I can see between the two prior files that imported fine and this third one is that the two prior files show on my desktop with the wmv "filmstrip" icon, and this third one shows with the "first frame" icon.  All 3 wmv files were downloaded from the same source, are about the same size (250MG), etc. I've tried dragging and dropping, importing from menu, and right-clicking. Nothing works. I deleted and re-downloaded the third just in case it was corrupted. But for some reason, every time I try to import this third file, CS4 gives me the message "Not Responding," and then Premiere crashes. I really can't stop working on this now, and I need clips from this file. How can I get it in there? Thank you.

    Well, WMV is a streaming, delivery-only format, and not meant for editing. However, some will Import and edit, to a degree, in PrPro, with some major processing overhead required.
    Also, WMV is a "wrapper," in that it can contain all sorts of "stuff." Likely, your one bad WMV has something that PrPro cannot handle, or does not like.
    Open up Windows Movie Maker (should be installed on most Windows machines), Import that WMV, and drag it to the Timeline. Export as DV-AVI w/ 48KHz 16-bit Uncompressed WAV. Import THAT file into PrPro, and edit away.
    With WMV files, conversion is always the best workflow.
    This ARTICLE will give you some background on "wrappers."
    Good luck,
    Hunt
    [Edit] I see that you got things sorted out, and that's good news. The above will give you some of the info that you seek now.
    Message was edited by: Bill Hunt - Added [Edit]

  • Why can't my Mac play wav or wmv files?

    I have recently become unable to view and listen to wav and wmv files. I have all the latest updates to Quicktime but, while Quicktime launches, it doesn't play the files. Are there some settings I don't know about? If it became corrupted, wouldn't the updates have fixed that? I can look at Youtube videos, just not the wav and wmv files people send me.
    On a possibly related note, it seems that the videos I view on Youtube are jerky - Like my computer can't keep up with the data stream, and skips frames in order to keep up with the sound. I hope I'm making sense. Is the problem with memory (or lack thereof)? I have a bad block, which has been worked around (I did a reinstall). Could that be the cause?
    Thanks in advance.
    Fred J.

    wmv files: you need to download and install Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft).
    YouTube Flash: yes, very likely your oldish Mac is no longer up to it, but:
    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    NOTE: On December 8, 2009 Adobe announced plans to drop Flash Player security support next year for Mac owners whose machines run PowerPC G3 processors.
    "Adobe will be discontinuing support of PowerPC-based G3 computers and will no longer provide security updates after the Flash Player 10.1 release," said Adobe in the same advisory that spelled out the seven patches. "This unavailability is due to performance enhancements that cannot be supported on the older PowerPC architecture."

  • Corrupt Dock File?

    Hi,
    So on my dock, I have my Applications Folder on it to use as a shortcut, but just recently, it started to display two of every application. See my picture:
    I also have my Downloads Folder on my Dock. When I drag things from the Downloads folder into the trash can, nothing happens. But then when I click +Show In Finder+, it shows the file as deleted.
    So it seems my Dock is not refreshing or something? So what I did to fix it was just remove the Applications and Downloads Folders from the Dock, and drag the Applications and Downloads folder from my hard drive to the dock. But everytime I log back in or download something else, the problem will arise again.
    Do I have a corrupt dock file? I didn't want to try messing with that until I consulted +Apple Discussions+ first.
    Thanks, Alex

    if recreating those stacks doesn't help try resetting your dock preference file. delete the file /users/user/library/preferences/com.apple.dock.plist and enter the following terminal command
    killall Dock
    your dock will be rest to the default. see if the problem goes away.

  • Cannot backup iPhone 3GS to my computer after upgrading to IOS 5.0 due to "corrupt backup file"

    How do I sync my 3GS to my computer after upgrading to IOS 5.0.1 and getting message "corrupt backup file, delete and retry"?

    Some Users have reported that a Restore has Resolved Issues after the Upgrade...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

    I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
    the error message got when it runs on another controller is "Error -32810 occurred at  The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
    I wonder by what it is caused?
    Thanks

    Hi Matthew,
    As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
    I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
    Please keep us posted on your troubleshooting steps. Have a great day!
    Amanda Howard
    Americas Services and Support Recruiting Manager
    National Instruments

  • Any way to repair corrupted pdf file?

    I created a pdf document on a my PC and it became corrupted with all these strange characters.
    Now when I open the document I get an error message that wasn't coming up before im hoping this msg will bring some light into the situation.
    If anyone can help me id be very thankful

    General Repair of Adobe Acrobat Reader corrupted .pdf file...
    1. Go to adobe official site, click the "Support" tab on the top of the screen, click on "Adobe Reader," and then select the "I can't open a PDF document" statement underneath "Troubleshooting." The Support tab is located near the top of the screen as a white word against a black backdrop. After clicking Support, you will see the phrase "Product Support Centers" on a new page in bold white font, under which is "Adobe Reader." The new page after clicking "Adobe Reader" will have the word "Troubleshooting" underneath the phrase "Adobe Reader and Help Support." Underneath "Troubleshooting" is "I can't open a PDF document."
    2. Follow the instructions on how to complete a general repair and installation of Adobe Acrobat Reader. To attempt the most basic PDF repair method, Open "Adobe Acrobat Reader" (select the program in your Start menu, which is on the bottom-left part of the screen), select "Help" from the gray tab menu at the top of Adobe Acrobat Reader, and click on "Repair Adobe Reader Installation." A meter should pop up indicating that your Adobe version is being checked for errors and is being linked back to the home Adobe official website just in case you need to download a new update of the program. If you need to download an updated version of the program, another pop-up will appear on your screen asking you if you want to update Adobe. Click "Yes."
    3. Reopen the PDF file. It should now be readable. If not, then try the next set of directions.
    4. If nothing helped, and you can't redowload .pdf file from source where it was, then use third party solution PDF On-line repair service https://onlinefilerepair.com/en/pdf-repair-online.html

Maybe you are looking for