Corrupted Adobe X Standard installation

I have just bought a Dell Windows 7 computer and have managed to corrupt the Adobe X Standard software that comes free with it.  I do not have an installation disk for this software or a backup - stupid I know!  I have run the repair installation and cleaning tool and it is now looking for a new license key which I don't have.  Can anyone help me on this or is all hope lost??
Thanks

I too have a dell which has acrobat x std and they failed to send me a licence or installation media. Can you run windows system restore to a time before you repaired your acrobat installation so it is corrupted again but still has its licence number intact.  Make a copy of the folder that is in here as this is the files to re install the software. C:\Program Files (x86)\Adobe\Acrobat 10.0\Setup Files
Then try installing the update from here on top of the corrupted version.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5444

Similar Messages

  • Adobe Acrobat Standard Installation Manual

    I am trying to do something very simple: Find an installation manual for Acobe Acrobat Standard.
    When I go to the Adobe site, here is what I'm trying to do:
    Go to Support & Learning -> I Need Help -> Products
    Choose Acrobat
    Click "Acrobat X Standard Help"
    Click "Getting Started and Tutorials" (takes me to: http://www.adobe.com/support/acrobat/gettingstarted/)
    Click "Downloading, installing, and setting up" (takes me to http://helpx.adobe.com/creative-suite.html)
    Click Acrobat X Pro | Help (takes me to http://help.adobe.com/en_US/acrobat/X/pro/using/index.html)
    Click "Getting Started and Tutorials" (takes me to: http://www.adobe.com/support/acrobat/gettingstarted/)
    At this point, Step 7 has taken me back to Step 4. 
    WHERE IN GODS NAME IS AN INSTALLATION MANUAL???
    The Adobe site literally takes me around in circles.

    This is for a large IT department, and for traceability we need to show that instructions were followed, as provided by the manufacturer/publisher. While I agree that it is "self evident" for the most part, we need to have documentation attesting to decisions such as making Acrobat Standard the default application for users -- what does this mean? Is this for the local user, or is it for all users on the machine? If Acrobat Standard is the default for ".pdf" files, are there any other files (as identified by extension) that it opens by default?  What about PDFMaker/Office integration -- what options are available through the installer for controlling who has access to that? E.g. If we purchase a single license of Acrobat Standard, but it is a shared computer (with independent logins), how do we ensure we are not in violation of licensing? 
    These are things that should be addressed during installation.
    But the fact that this is a paid product, and it doesn't have an installation manual, is the bicker pain in my side right now.

  • Installation for Adobe Acrobat Standard 9 and Premiere Elements 8

    Hey guys,
    I was hoping to see if anyone could help me out with this. I recently bought a new laptop, and obviously, I was stuck a few days moving everything from my old one to my new one. So when it came to install the Adobe Acrobat Standard 9 in the new computer, I noticed that the installer here at the Adobe Web Page is not accepting my serial number for that product. And additionally, I don't see the installer for the Premiere Elements 8 and I don't know if the Photoshop Elements 8 installer in the web page is gonna do the same thing like the Acrobat Standard 9. Hope to hear from you. Thanks in advance.

    Hi DJRicky7,
    You can download Premiere Elements 8 from the direct download links available at: Direct Download Links for Lightroom 3 and Photoshop Elements 8 | ProDesignTools
    Please make sure you follow the important steps mentioned on the page before initiating the download.
    For Acrobat 9 Std. you can click on the link: https://sendnow.acrobat.com/m/g.ashx?i=rol7pInCLAR6FfBXHhVUfA&x=qPtk3SqdJjawgwvDY49b3A
    Regards,
    Rave

  • I need to download installation files for my Adobe Acrobat Standard 9.5.5.

    I need to download installation files for my Adobe Acrobat Standard 9.5.5. There are no links to be found for this version on the adobe site..
    I have two licenses for adobe acrobat, but cannot find my software. Any help with a direct link to the standard version would be helpful.
    The professional version does not work with the standard licens.

    if you purchased from adobe, log in to your account and check your order history, https://www.adobe.com/account.html
    if you acquired via dell, https://smartsource.dell.com/
    if you purchased elsewhere, contact the vendor.

  • Adobe Creative Suite 5.5 Design Standard installer not listing InDesign as an option.

    I uninstalled InDesign CS5.5 from Adobe Creative Suite 5.5 Design Standard to try get Adobe Content Viewer working. But now there is no way to re-install from the from the Adobe Creative Suite 5.5 Design Standard Installer. It only lists my remaining products: PS, Ai and Acrobat X. How can I re-install?

    On Mac 10.7.5.
    In Utilities/Adobe Installers/ I used the "Adobe Creative Suite 5.5 Design Standard". I unchecked InDesign to uninstall with the intent of re-installing later. The screen for the installer now looks like this: As you can see, there are no re-install options.

  • WHERE CAN I FIND  ADOBE FLASH BUILDER 4.7 STANDARD INSTALLATION?

    1 year ago I bought Adobe Flash Builder 4.7 Standard. Installation files i lost. Creative Cloud contain Adobe Flash Builder 4.7 Premium, and does not contain Adobe Flash Builder 4.7 Standard. WHERE CAN I FIND  ADOBE FLASH BUILDER 4.7 STANDARD INSTALLATION?

    Please go to the product download page and select the trial for Flash Builder 4.7 - http://www.adobe.com/downloads.html
    The trial available is for Flash Builder Premium 4.7, but if you use your Flash Builder Standard 4.7 serial number with this you will get access to the features in the Standard version.
    Thanks
    Bev

  • Scansnap Scanner, Adobe Standard installation on Mac

    I bought a ScanSnap Scanner that is bundled with Adobe Acrobat Standard, however, I have a Mac Mini and therefore no CD/DVD drive.  How do I install Adobe Acrobat? 

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe Acrobat 9 standard installation issues

    I have Adobe acrobat Standard 9 and I just reformatted my hard drive and tried to reinstall my product serial number 1016157926356497980XXXXX and it says that 2 of 2 licenses were already installed.  I don't know how that is possible given I have only installed it on this computer.  Please wipe the data clean so I can install again.
    Thanks.

    Hello dabigman52,
    Adobe Forums are public so please don't post your product serial numbers. Currently I have edited that in your orginal post.
    I would suggest to contact Adobe Customer Service regarding this# http://helpx.adobe.com/in/contact.html
    ~Deepak

  • Will an Adobe Acrobat XI Pro Upgrade license work to upgrade an Adobe Acrobat XI Standard installation?

    The buying guide for the XI Pro Upgrade (here - Buying guide | Adobe Acrobat XI Pro) does not list Adobe XI Standard in the left hand column... but I currently have XI Standard and want to to go XI Pro, will this work?

    Hi Mike ,
    There is no such policy to upgrade license from Acrobat XI Standard to Acrobat XI Pro.
    If you have the subscription for the Standard version ,you need to get that cancelled and get a new subscription for Acrobat Pro.
    If you have the retail version or if you have purchased the software ,you can return that and get a new retail version for Acrobat XI Pro.
    For more information ,please contact the technical support.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Regards
    Sukrit Dhingra

  • Adobe X Standard not recognising scanner

    I've just installed AcrobatX Standard and in the installation it will not recognise my network scanner and has stopped all other programmes recognising the scanner too! Can anyone help?

    Hi Varinder,
    Thanks for your reply and sorry I've been a while getting back but I've been trying to sort this out. Here is the story so far:
    1. I had an old version of Adobe 5 on my laptop running well but complaining each time I opened it that the software wasn't right for Windows 7 which is my operating system (even though it always scanned and opened documents fine)
    2. I decided to update so I installed Adobe X Standard onto Windows 7 and it seemed to corrupt the printer driver and would not recognise any printer. The printer is on my network and wired into the router with a cable but the network operates wirelessly. None of my other software which uses the scanner would recognise it waas there either.
    3. I decided to try and install the driver again which I've done. Now the other software recognises the scanner but only with the printer selection as TWain. I've tried Acrobat X with TWain setting and it does recognise the scanner but seems to scan via the HP driver which takes an age, whereas Acrobat 5 which is still on my machine will scan from Acrobat without the Twain setting.
    Any help will be welcome.
    Thanks
    Bob

  • Adobe 11 std, Installation, serial number not valid.

    Good afternoon,
    While finishing the installation of Adobe 11 standard, the serial number is requested.
    I input the one provided in the License certificate issued by the SW provider in our company.(hiding some digits for security reason ) but the program says the serial is not correct. I also tried to redeem this code in the following site: https://creative.adobe.com/redeem and the error persists (attach screenshot)
    Could you please confirm if it's our SW provider's fault. Are we doing anything incorrect. Please this is urgent.

    Hello.
    Thanks for the quick answer. Unfortunately, the same error keeps coming up. Is there any other way to check whether the serial numbers we were provided by our software provider are ok to release? Is there any expiration period from purchase to redemption/ activation.
    Thanks for your support and best regards.

  • How to Disable Updates in Adobe Acrobat Standard

    About 8 months ago we installed about 40+ Adobe Acrobat Standard 9.0 installations throughout our environment.  We then have had the time to create a completely hands free installation .msi that disables the AutoUpdate feature and a configures a few more items.
    My question is:
    How can I disable the AutoUpdate feature on Adobe Acrobat Standard 9.0 without having to go into the Edit>Preferences Menu and deselect it?
    Thanks for your time.

    Go here:
    http://www.adobe.com/go/acrobatitinfo
    The Updater guide has your needed information.
    If you get the AIM AIR app, you'll get a database of other configurable preferences.
    Ben

  • Question on Adobe Flash Player Installer/Uninstaller 12.0 r0

    Okay, I have windows 7 home premium 32bit installed on a dell vostro 400. I'm using 2 browsers, Internet explorer 11 and Firefox the latest version.  I have found that an installation of a plug-in and an activeX extension work in internet explorer and It's really confusing as to which one is for which sometimes.
    I need someone to to help me with Adobe® Flash® Player Installer/Uninstaller 12.0 r0.  It's causing some problems for web browser based email clients and slows down almost to a hault then won't close at all after it crashes.
    Is there any way I can clean & fix Adobe® Flash® Player Installer/Uninstaller 12.0 r0 with out removing flash cookies when using internet explorer?
    Is there any way I can have firefox block flash play from playing anything?

    First, there are two Flash Players for Windows (three if you count Chrome's PepperFlash plug-in)
    ActiveX is for IE - IE needs it because it uses 1993 ActiveX controls for security, which is not really secure at all, and complicates everything you do with IE.
    Tha standard plug-in is for Firefox, Opera, Safari and several other lesser known browsers like Maxthon and Seamonkey.
    If you use IE and another browser, you nee both, and they both need to be up to date. As Imentioned Chrome has its own which updates through the browser.
    To make sure you're up to date for both, download the following:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player Uninstaller
    Also, download these:
    Shockwave Player Uninstaller
    Shockwave Player 112 FULL installer (ther browsers)
    You'll need to install Shockwave with the FULL installer for IE too, but there isn't a direct download for it. You'll need to go to: http://get.adobe.com/shockwave/otherversions/ using IE AFTER everything else is done.
    Save all the files and close your browser.
    Run the uninstallers first (both of them)
    Go to: C/Windows/System32
    Delete the Macromed folder.
    Open your Registry Editor (Start>Run or press the Windows key + R and type 'regedit' [minus the quotes] and click OK)
    In the Registry Editor, go to:
    HKEY_LOCAL_MACHINE/SOFTWARE
    Delete the Macromedia folder (Right click and choose "Delete").
    Go to:
    HKEY_CURRENT_USER/Software and delete the Macromedia folder there too.
    Close the Registry Editor and empty your recycle bin.
    Run the Flash Player installers, and then the Shockwave FULL installer you downloaded.
    Lastly, open IE and go to: http://get.adobe.com/shockwave/otherversions/ to download and install the Shockwave FULL installer for ActiveX (IE).
    For Firefox, I recommend FlashBlock (https://addons.mozilla.org/en-US/firefox/addon/flashblock/) It's prevent ANY Flash content from loading until you allow it manually. It can get to be a pain, but you eventually get used to it.

  • Adobe 9 standard won't launch

    I have Adobe 9 standard (9.4).  I have been using it for several years.  Suddenly, it won't launch.  Attempting to launch it results in several error messages:  "missing file C:\dell\N878J"", Missing "Acrodist.exe"' and Adobe XMP.dll is missing.  
    Since this program was pre-installed, I do not have recource to the installation disk.  I was going to install a trial verson of Acrobat Pro XI but i cannot uninstall the older Acrobat 9--which is required, according to the Acrobat XI installer.
    I tried Acrofix.  It returned a 07 error code.
    Can you tell me where to get copies of the missing files?  or how to either reinstall or remove the older Acrobat 9.4--there is no installer or uninstaller in the Acrobat 9 file.
    Thanks.
    W. Decker
    [email protected]

    I recommend the Acrobat forums. CreatePDF is something quite different. You should also contact the PC supplier for your install disk, it's their job to provide it to you. Good luck!

  • Adobe Acrobat Standard 9.5 Install Error:  "Error applying transforms please ensure specified transform paths are valid".  Any ideas on how to fix this?

    I had Acrobat Standard 9.5 on a laptop that broke.  Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”.  Any ideas on how to fix this?

    Rahul,
    No error numbers other than the message I mentioned previously.
    I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
    When I unzip the Acrobat file this is what is in the setup ini file:
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.0
    RequireIE=6.0.2600.0
    [Product]
    msi=AcroStan.msi
    Languages=1033;1031;1036
    1033=English (United States)
    1031=German (Germany)
    1036=French (France)
    CmdLine=TRANSFORMS="AcroStan.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=2
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    Thoughts?
    Thanks again,
    Tom

Maybe you are looking for

  • Recording audio from line-in

    When I start recording, Captivate switches automaticly from line-in (where my input device is) to microphone. Captivate forgets my configuration, which I set under "Audio" / "Options". How can I get live capturing using line-in? When I edit single fo

  • No puedo desistalar Adobe Acrobat 8.0 Español

    Mi sistema operativo es Windows Xp profesional sp2, he intentado instalar Adobe Acrobat 8.0 Español, y no puedo desistalar otra versión igual que tenia en ingles, el error que me da es que ya existe otra versión igual, lo raro es que era en ingles, l

  • Icon size for audio file insert on a PDF page.

    Acrobate X V10.1.9 Windows 7. I wish to insert an audio file on a pdf page. I select "multimedia", "sound". Get the window to select the file. Once selected I then find that I cannot size the icon that appears on the page (click to play). The two fie

  • OIM 11g R1 LDAP Synch with OID.

    Hi, We are doing an LDAP Synch with OID directly. The users from various organisations in OIM needs to be synched to different OU's in OID, instead of a single container. How do we acheive this? would it be easy if we involve OVD also?

  • How to out this type of data

    i have one internal table which had 1 field and the data in that field are like an header data and the other internal table with many field which have many different data like an item data . now i want to combine header data as an FIELD into new inte