Corrupted device.exe file?

For the second time now my Treo Pro has quit working. It will freeze up and so I eventually do a soft reset and then the cellular radio won't turn on. As long as the sim card is in the radio won't turn on. It also has very little response to the buttons as long as the sim card is in. Once I take the sim card out the cellular radio turns on and it responds to all of the keys like it should. I also repeatedly get an error message that says there is a problem with the device.exe file and wants to know if I want to send Microsoft a report.
I have tried three different sim cards with the same result every time. I have also done several hard resets and there is no change, it still won't work as long as a sim card is in.
Is there any way to repair this or am I stuck returning my second phone? The first one did the exact same thing about two weeks after I got it. It has been about two weeks on this phone as well.

With respect to device.exe, these errors often seem to result from other software crashing. If you installed any new software after the first two weeks, try uninstalling it.

Similar Messages

Adobe Reader corrupted my .exe files

I downloaded Adobe Reader and it changed all my program icons to Adobe icons and programs won't open. Programs try to open in Adobe Reader as .pdf files. Error messages says it is not a supported file type or because the file has been damaged.
My computer is less than 2 weeks old and I can't access my programs.

I've got this problem. It would'nt allow me to system restore so I've had to uneinstall it. I'v tried to re-install it twice and each time it takes over all my icons and wont allow any of my programmes to open. This means I can't print off concert tickets or anything. Did you eventualy solve the problem?

I can't access "Device Manager" "MMC" "CMD run as administrator" and some .exe files

<img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560661" />
<img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560666" />
I need help! I am in hurry.

Hi,
Sorry for my delay.
Based on your description, I’m a little confused with your issue. Would you please let me know more details
of this issue? Thanks for your understanding.
Would you please let me know OS edition information of this problematic server? Did you logon the server via
an administrator account? Meanwhile, would you please let me know the complete error message when access Device Manager, MMC or other .exe files?
For CMD, please open Task Manager, click File and select
Run new task. Then type CMD and select Create this task with administrative privileges option in
Create new task wizard. Will you still encounter issue?
By the way, I type above links which you provided in IE. However, I can only find
Page Not Found error. You can upload screenshots to
OneDrive and then post link here. (Please hide all protected or private information)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

What is a good exe.file that is not corrupt when trying to download firefox 3.6.

Windows 7 / ( Internet Exporer ) supports dial up but with my service provider there is a ( fast-dial-up) available. This is not supported by Windows 7 and Internet Exporer. That is why I need Firefox. I go to www.mozilla.com , then click the 3.6 firefox download, then click another download until a popup happens which asks to run or save the file and I click Run as per the instructions. I have had 3 different exe. files which seem to manage the download but so far every one has been determined to be corrupt by my computer and the extraction has failed. Can someone give me a exe. file from which I can download which is not corrupt.??
Also any suggestions on how to get fast dial-up with Windows 7 with Internet Explorer would be very appreciated.

1. "Fast dialup" ''(usually called a "Web Accelerator")'' is a feature normally provided by your ISP. They need to make it compatible with Windows7, not the other way around. That "fast dialup" also may need to be compatible with specific browsers via a plugin or extension for the browser. 
http://en.wikipedia.org/wiki/Web_accelerator
2. As far as a corrupt Firefox installer .exe, try disabling your anti-virus application for only as long as it takes to download Firefox.
I seriously doubt that Firefox on Windows7 is going to work with that "fast dialup" if your ISP doesn't support Windows7 to begin with.

I lost my CS5 Master Collection CD & my Set-up.exe File is Corrupted [ SOS ]

Hey, I was have a CS5 Master Collection CD and cuz i travel alot it seams that i lost my CDs fortunately i was have a copy on my laptop, but the problem now that my Set-up.exe is corrupted so i can't lunch the setup if anyone can help me and upload just Set-up.exe File it will be nice Please help me please i need it badly.

This is just getting beyond ridiculous...
AND I can see from several forum threads I am not alone in this issue.
Adobe, you absolutely SUCK for making it so difficult to install this software. I am normally a fan of Adobe products, but now that you guys have bought out all your competiton you are getting lazy and stupid.
This is the most ridiculous crap I've ever seen when trying to install a product I PURCHASED!!!!!!!
So, after over another week (I have been trying to find a way to install Acrobat with my purchased copy of the Master Suite for MONTHS)... My IT guy finally gets me the installer DMG for Acrobat and now I cannot install it with my master collection because the serial numbers are not the same?
I never got a god damn serial number for Acrobat Pro when purchasing the master collection.
Asking Adobe for help is totally worthless and not even worth taking the time to do so because all they give you is some BS pre-recorded response that doesn't help you with JACK...
It has been a long time since I've had a problem installing a piece of software I PURCHASED.
BOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!
YOU SERIOUSLY SUCK ADOBE ON THIS ONE!!!!!!!!!!!

EXE files can't open?

I successfully ran Boot Camp and installed Windows XP Pro but aside from everything else working fine I can't seem to be able to open EXE files.
I get the error that it's not a valid Win32 file when clearly it is. I tried this for another app too and this time I got a dialog box saying:
Error loading Hawlvoice library (hvdi.dll) Maybe not installed?
I have no idea what's wrong. I installed all the drivers from my Leopard disc, could it have skipped some? Is my Windows installation corrupt?
Thanks

Hi and welcome to Discussions,
first make sure that the Mac audio device is recognized and the driver for it installed (Control Panel - System - Hardware - Device Manager).
As for Hawlvoice this seems to be installed by the 'TeamSpeak' app, so look here for a possible solution: http://forum.goteamspeak.com/showthread.php?t=37338
Good Luck
Stefan

My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
 Cheers, Tom

I had to re-install XP on my laptop. I installed itunes. Now I want to restore my music from backup CD's. But the option device under file is greyed out. I can't select restore from backup. How do I make the restore option active. I have an ipod nano

I had to re-install XP on my laptop. I then installed itunes again. Now I want to restore my music from backup CD's. But the option device under file is greyed out. I can't select restore from backup. How do I make the restore option active? i have an IPOD nano.

I think it's QuickTime player causing the problem, when I try to open it I get the windows error that an error has occured
Let's try swapping out your QuickTime again, taking a few extra explicit precautions this time.
Head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
7. Restart your computer.
Now download and save a copy of the latest standalone QuickTime installer to your hard drive. (We'll run the install from there rather than online.)
Latest Quicktime Installers … get the one that doesn’t mention iTunes
Switch off antivirus and antispyware applications prior to the install. Start the install by doubleclicking the QuickTimeInstaller.exe.
If that install goes through okay, restart the PC and try launching iTunes again. Does your iTunes launch properly now?
(If you get an error message on the QuickTime uninstall or standalone reinstall, let us know what it says. Include error message numbers if you're getting any.)

I need to de-install Foxfire 6 and go back to Foxfire 5 on my Mac to run a picky program that won't run under Foxfire 6. I can't get install software for version 5 to run. It sees it as exe file.

When I drag the downloaded Foxfire 5 install file to my Applications folder, it shows up as an .exe file. When I double click to run it, I get an error message saying it is not DOS executable.

In the exact same boat here. Life-long iPhone user. Got a 6 on Tuesday and absolutely hate it to the point where I dread using it. Upgraded from an iPhone 4 I'd had for 4+ years. After making several phone calls, my understanding is that Apple will take it back no problem, within 14 days. My iPhone 4 was out of contract with AT&T but when I bought the 6, I renewed my previous contract for 2 years. My AT&T contract also has a 14 days, cancel for any reason with no early termination fee, clause. I assume your AT&T contract would have the same. But I don't think you need to worry about canceling your contract. Since you still have your iPhone 5, you should be able to bring it to the AT&T store, have them switch the existing contract from the 6 to your old 5 and then you can go return the 6 to the Apple store where you bought it. That's no different than being halfway through a two year contract, your phone is stolen and you have to buy a new one at retail price to replace it on your existing contract. You're essentially just bringing your own device you already paid for (the 5) to the existing AT&T plan.
I would just caution that assuming you want to keep your phone number, get the service put back on your 5 at AT&T and have them deactivate the 6 before you go return the 6. Or just make sure the Apple store is capable of transferring the service from the 6 back to the 5 while you're there to do the 6 return.

Oracle 9iLite download setup.exe file does not work

Like many people (I am discovering more by the minute), I am unable to install 9i Lite.5.01. When the setup.exe file is triggered, a hourglass appears for a second, then nothing...
I am installing on a windows 2000 terminal server, therefore I have to go through (Control Panel) Add/Remove Programs. The Oracle Universal Installer says that setup.exe is either a directory or is corrupt.
I have tried a couple of fixes suggested in this forum, such as unzipping the files to /install/disk, but to no avail. I have also tried downloading the software again, but with the same results.
Is there anyone out there who has successfully overcome this problem ?

Yes, there has been a problem reported with setup.exe on the Pentium 4 processor.
To overcome the problem, copy the contents of the CD on to your hard drive.
Then search for every occurence of the file symcjit.dll under the base directory where u have copied from your CD.
and rename them to symcjit.old.
Then launch setup.exe.
This should take care of the problem

After downloading an exe file, I can't double click to run it or right click to open/open in container. It does't show up in the download folder either.

Helping a friend. After clicking "Save", the exe shows up in the Download manager, but you can't click on it to run it or right click to either open/open in folder (both are grayed out). If you look into the download folder, there's nothing there.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

VISA read in exe file is not working

Hi all,
I am having problems with VISA read in an exe file created.
I am trying to write to and read from a programmable power supply via RS232. The VI writes a command to the instrument to set the voltage level. It then writes another command, requesting the resulting current value. This value is then read by VISA read
The VI is working fine on the development PC, which has LabVIEW installed. The exe file is also working fine on this PC. However, when I try to run the exe file on another PC (I've tried several) everything seem to work except for the VISA read functions. The voltage level command is sent, as well as the On and OFF commands, but the current is not read back.
I guess there must be something I have missed in the installation. I am working in LabVIEW 8.5. I have created an installer and included
Runtime Engine 8.5.1
VISA runtime 4.5
Is there something else I should do? I am really running out of ideas here...
I hope someone has a clue about this!
Clara

Clara-
1. Have you verified that the COM port settings in Windows (check under device manager) are matching how you initialize them (Baud, bits, parity, and flow control) and that these match the power supply's settings?
2. Also, are you trapping an error message after the attempted Read command (this will make it a lot easier to diagnose).
3. Do you programmatically close the VISA session at the end of the program?
4. You can always post the code to see if the forum members will catch the porblem.
~js
2006 Ultimate LabVIEW G-eek.

Application exe file cannot get FieldPoint data

I built an application exe file from my development notebook computer (Win XP) that have LV7.1 and Max 3.1. The stand alone exe file runs well in the same notebook. But it could not get any FP data when it is running from a target computer (Win 2000). I found that Max was version 3.0 (FP version 4.0) in the target computer. The development notebook has MAX 3.1 (FP version 4.1). Is this the reason I cannot get FP data (temperature and other paramenters)?

The version difference is probably one of the problems. A second problem may be that the resource/device/item names that are configured in MAX, and/or the IAK file name may be different on the second machine so the EXE may be trying to access a non-existant item.
Regards,
Aaron

ORA-19566: exceeded limit of 999 corrupt blocks for file

Hi All,
I am new to Oracle RMAN & RAC Administration. Looking for your support to solve the below issue.
We have 2 disk groups - +ETDATA & +ETFLASH in our 3 node RAC environments in which RMAN is configured in node-2 to take backup. We do not have RMAN catalog and the RMAN is fetching information from control file.
Recently, the backup failed with the error ORA-19566: exceeded limit of 999 corrupt blocks for file +ETFLASH/datafile/users.6187.802328091.
We found that the datafiles are present in both disk groups and from the control file info, we got to know that the datafiles in +ETDATA are currently in use and +ETFLASH is having old datafiles.
RMAN> show all;
RMAN configuration parameters for database with db_unique_name LABWRKT are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+ETFLASH/CONTROLFILE/snapcf_LABWRKT.f';
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+ETFLASH/controlfile/snapcf_labwrkt.f';
Above configuration shows that SNAPSHOT CONTROLFILE is pointing to +ETFLASH. So I changed the configuration with the SNAPSHOT CONTROLFILE points to '+ETDATA/controlfile/snapcf_labwrkt.f'. At the end of backup, SNAPSHOT file was created in +ETDATA and I was expecting it to be the copy of control file being used which has dbf located in +ETDATA. But still the backup was pointing to old datafiles in +ETFLASH. Since we dont have RMAN catalog, resync also is not possible.
When I ran it manually, it was successfull without any error and was pointing to the exisiting datafiles.
RMAN> backup database plus archivelog all;
I hope the issue will get resolved if the RMAN points only to the datafiles present in +ETDATA. If I am correct, please let me know how can i make it possible? Also please explain me why the newly created snapshot file does not reflect the existing control file info?

Hi,
I am getting an error from the DBA Planning Calendar every time the job ...
So when was your last successfull backup of this datafile. Check if still available.
If this is some time ago, and may be you are currently without any backup, try to backup without rman at once,
to have at least something to work with in case you get additional errors right now.
Then you need to find out what object is affected. You are on the right way already. You need the statement,
that goes to dba_extents to check what object the block belongs to.
Has the DB been recovered recently, so the block might possibly belong to an index created with nologging ?
(this could be the case on BW systems).
If the last good backup of that file is still available and the redologs belonging to this backup up to current time are as well, you could try to recover that file. But I'd do this only after a good backup without rman and by not destroying the original file.
If the last good backup was an rman backup, you can do a verify restore of that datafile in advance, to check if the corruption is really not inside the file to be restored.
Check out the -w (verify) option of brrestore first, to understand how it works.
(I am not sure it this is already available in version 7.00, may be you need to switch to 7.10 or 7.20)
brrestore -c -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -b xxxxxxxx.ffr -w only_rmv
You should do a dbv check of that file as well, to check if it gets more information. I.E if more blocks are
affected. rman stops right after the first corruption, but usually you have a couple of those in line, esp. if these are
zeroed ones. (This one would also work with version 7.00 brtools)
brbackup -c -u / -t online -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -w only_dbv
Good luck.
Volker

JRE install caused loss of most .exe files!!

WinXP home, sp2
After downloading and installing JRE, windows cannot find most of my C: drive (program) .exe files...INCLUDING GHOST!.....even after removing JRE.
Somehow IExplorer worked after a few tries. Cannot manually find them either.
ran CHKDSKR, no luck.
Checked for W32/Pate worm/virus, not there.
All programs not in my C: drive work.
PLEASE ADVISE

I reinstalled Ghost 9.0 and restored my C: partition....First time I needed to rely on a backup ..TG.
Which brings my system back to Win. service pack 1a.
Why would JRE corrupt my C: partition??
I'd like to find out before I try installing JRE once more.
PLEASE ADVISE
=RR=
BTW...I believe I need it to run OpenOffice.org and some Adobe products.

Corrupted device.exe file?

Similar Messages

Maybe you are looking for