Corrupted image files in Aperture 3.0.2

After upgrading to 3.0.2, I started working on some existing tiff files. Suddenly the image in the viewer was split into the top half from one image, and the bottom half from a different image in the same project! I tried to generate a new version from the master, and it would appear in the viewer, but when I try to make any adjustments to it, the new image was chopped in half as well, now just the top half, rather than the combination of two files. It seems to be related to the cropping tool somehow.
Basically the app is unusable at this point. Not good...

NOTE: 10.6.3 and 3.0.2 do NOT play well together. I had the same corruption issues. In addition, both benchmarking programs I use (Cinebench and XBench) recorded FAR SLOWER OPEN GL speeds when using 10.6.3. For example, the xBench rectangle rotation benchmark was 148 in 10.6.2 and 67(!!!) in 10.6.3.. Cinebench statistics showed a 35-40% reduction in performance. I would never had known this until I had Aperture problems, and on a hunch, thought I should check this out.
Submit feedback to Apple. I just rolled back to 10.6.2 and Aperture works MUCH BETTER. MUCH BETTER.......
I have come to the conclusion that this is the end of the Snow Leopard road for myself and my 3.5 year old machine. Apple is saying move on, as it is painfully clear that old machines will not support the new updates well. However it is odd to see newer machines with the same problems. Alas, it may just be Quality Control rather than Hardware Obsolescence.
Message was edited by: lovinmymac

Similar Messages

Attempting to upgrade to Firefox 3.6 (using an ancient Mac OS 10.3), but received an error message (corrupt image file) when downloading - any way to correct this with my current OS?

I'm currently trying to update a few programs on my good old (VERY old) Mac Powerbook, but I ran into an error when downloading Firefox version 3.6...I'm currently running Mac OS X 10.3.9, which isn't compatible with the most recent versions of Firefox (or anything, for that matter), but it should still allow an upgrade of version 3.6; however, once the file finished downloading, an error message popped up indicating there's a corrupt image file. Is there any way to work around/correct this problem, or am I stuck with my old version of Firefox until I bite the bullet and upgrade my OS??? Any help is greatly appreciated!!

Firefox 3.6 requires at least OS X 10.4, the last version of Firefox that runs on OS X 10.3.9 is Firefox 2.0.0.20 available from https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/

Corrupt image files cause upgraded iPhoto to crash

I have been spending some time trying to find and remove corrupt image files from my iPhoto library. These are not just scrambled images when viewed they crash any and every program you view them with. Including Finder. I accidentally put one on my desktop and finder went into a auto restart cycle I could not stop. until I removed the file with pathfinder. I have found about 30 of these so far (my library is about 25,000) Many of these are in the data file but some are not. They are of all types (jpg,tiff,psd) Thorsten Lemke, (Lemke Software) tells me it is a quicktime issue.
Here is a link to one of these files. Warning it will crash safari if you try o view it.
http://vincentdavis.net/try/try.jpg
Here are my questions.
1. is there some way to fix these
2. is there some efficient way to find and remove/fix them?
3. how did this happen? I had no problem before update (that I knew of)
Thanks
Vincent

I did try the link, and as you said - it crashed Safari. However, I have google searched and also searched the Apple Support sites for 'fix corrupt images' with no luck. I'm sorry but I think the only way of knowing is to try and open each of them.
However, I did read on Macworld's site once that sometimes photoshop or other image editing programs can open the corrupt files.
Sorry for not being much help here - I hoped that my first suggestion would have done the trick.
Sam

Renaming image files in aperture?

how do I rename my image files. I need to do this in order for my photos to be accepted in 'Hugin'. at the moment it says error, this file contains invalid characters, hugin can't use files with these filenames, please rename files. what do I do?

When you export the version from Aperture you are free to name the exported version anything you wish. Use a format that is acceptable to the site you are sending the files to.
Or else just rename the already exported images using the finder.

Corrupted image files in Lightroom?

I opened up Lightroom this morning and noticed that some of my files from a recent shoot look like this:
Are they corrupted?
If so, how does that happen? I've never seen this before and I have thousands of images in LR.

Thanks. I read through a few of the other threads. I found one comment that might be applicable to my situation:
Good - most often this tell-tale/signature-looking corruption is due to hardware - transfer hardware if corrupt upon first rendering (true raw rendering, not initial preview display), hard disk if corrupt after first rendering. And sometimes ram.
I think this may have had something to do with how I got these files onto my computer. I shot the pictures while visiting family. I had my Macbook Pro with me, which is not my main image editing machine. I imported the files into LR4 on the MPB from the 5D3 using the USB cable.
When I returned home, I moved the files from their location on the MBP to a USB flash drive, and then imported them from the flash drive to LR4 on my Mac Pro (which is my main image editing machine).
The corrupted images are only from this group. So I'm hoping that it was the transfer to and from the flash drive that caused this, especially since I've never experienced it before and don't see it in any of my other images.
Fingers crossed!

LR5 "move" corrupting image files

I recently used LR5 to move image files from an old hard drive to a new hard drive. I formatted the new hard drive prior to moving the images onto it.
Instead of the “copy” or “add” function, I used the “move” function, only to find that a fraction of my images were moved to the new hard drive.
When I opened the image folders on the new hard drive (they do not exist anymore on the old hard drive since LR physically “moved” the files), it appeared all of the images were there. But when I used PhotoMechanic and Bridge to view the images that weren’t appearing in LR, I was horrified to see both RAW and JPEG files were corrupted (banding, discoloration).
The files come from a really important project I have been working on since May, and now I am terrified to use LR at all in the event the program corrupts my files again.
Interestingly, when I open the images on Adobe Bridge and click "purge cache for selection", the thumbnail briefly appears normal, then returns to the corrupted preview.
Has anyone experienced anything like this, and is there any way to save my files? I fear I have totally lost faith in LR.

As Jim and Rikk said, the corruption and maybe the lost files is probably a hardware failure. As far as the lost files, there are reports on the forum every couple of months where people lose files doing a MOVE on import or MOVE in LR of imported files from ONE PHYSICAL DRIVE TO A DIFFERENT PHYSICAL DRIVE. Moving files on the same drive seems to be OK. I don't know if this is an obscure bug that shows up because of permissions or something but it has been reported.

Frustration - Iphoto corrupting image files during import (?)

To begin with, I'm a recent convert from Windows to the Mac. I'm running a mac mini at home, and a Macbook with Boot Camp at work (in addition to my desktop pc). All of my software is up to date...
I take alot of pictures with my digital camera (canon powershot). Saturday I took about 300 pictures, took the SD card out of the camera, put it into my Sandisk card reader, imported the pictures into iphoto and everything worked great. I chose to not delete the pictures after the import as I wanted to bring the card into work and upload the pictures on my pc.
The next day (Sunday) I took another 70 or so pictures. I was able to view all of the pictures on my camera that I had taken over the past two days.
I go to do an import , taking the exact same procedures that I took on Saturday (and that I always do). The first thing it does is identifies that there are duplicate pictures. I choose the option of "don't import duplicates" and apply this to all of the other duplicate pictures.
At the end of the import, I got an error message saying that some of the files were corrupt. Now, there were pictures from Saturday that were still on there (and readable/viewable). However, every picture that I took on Sunday was "unreadable" and did not show up in iphoto. I put the card back into the camera, and now I can't view the pictures (they show as "corrupted data".
I then pulled the SD card details up in Finder, and the "corrupt" files still show sizes of 2.4mb to 2.8mb, consistant with the good pictures. It shows the file's "Kind" as JPG Image... I double clicked on them and Preview comes up saying something to the extent that the file is corrupt,
I've taken the Sandisk card reader, plugged it into my Macbook (using iphoto in osx) and was able to view one or two of the pictures from Sunday.
Once I got to work this morning, I plugged the sd card into my Windows machine and it too says the files are corrupt. It shows them being on the card, it shows the file sizes, but I can't open the pictures in anything...
If this was a one time deal, I'd be thinking it may be something I've done to cause the problem. However, this is the third instance I've "lost" all of my photos because of them becoming corrupt during an import into iphoto. There definately appears to be a pattern.
I have somewhere around 8,000 pictures inside iphoto that I've taken and had no problems with. I mention this to illustrate that I'm not doing anything differently than I've done before. I have another 14,000 on my old Dell that I need to move over, but I'm questioning if I should do that now.
Does anyone have any ideas on what the problem might be? Is anyone else experiencing (present or past tense) this problem? Where I'm new to the mac, I understand that I might be doing something wrong. However, I've imported photos to the software (what seems like) hundreds of times, the same way each time. This makes me want to rule out user error...
One other question, I'm saving the "corrupt files" with the hope that there's a software program which will "fix" the files. Do you happen to know of such a piece of software? I'm hoping that I can get them fixed at some point.
Where I'm taking pictures of my kids, its extremely frustrating to find out that the pictures (memories) I was hoping to make prints of are now "gone". Its almost like rolling the dice when doing a photo import any more. Most all of the time it takes, but every now and then the pics are lost...
I'm hoping to identify the problem (either user error, procedure or software issue) and fix it as I really like the mac.
Any help/suggestions you might have for me would greatly be appreciated!
Mac Mini Mac OS X (10.4.10) Also running Macbook 10.4.10

The Chainsaw
Welcome to the Apple Discussions.
First: the corrupt files: download Graphic Coverter, a shareware which is often successful where other software isn't. But first, if the Mac will let you, copy the files off the card to the Mac.
I'm in this board a while now, and I can't recall an issue of iPhoto corrupting images on import. After all, it's just a simple file copy, at heart. I would be more inclined to suspect the card. DO you have more than one? Does the problem also occur with the other cards?
Try use Image Capture to download the pics to the Mac first, then import them, see does that help. Image Capture is in your Applications folder.
Regards
TD

Mavericks Preview corrupts image file

I am running Mavericks on iMac circa 2011. I can use Preview to open 16 bit tiff image files which are 1 or 2 MB each. Because the pixel values are small, I use the Auto Level button within the Adjust Color tool to see a decent image. However, if I then close the file by clicking on the x on the top left corner of the image, the saved image will now have zeros in the entire image. That is, opening it again will not show anything even with the Adjust Color tool I checked by opening it with MATLAB and sure enough, everything is zero. This does not occur if I do not try to adjust the image contrast using the Auto Level tool. This also does not occur if I hit the 'Reset' button within Adjust Color before closing the file. Please help!

The startup drive is failing, or there is some other internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Corrupted image files

I create files using PS. Sometimes, these files will fail to open in PS at a later date. The error msg is that the file is corrupted. I can open them in Illustrator to view them. But they are lost to opening in PS. Why? And what can I do to correct this issue. This is random as best I can determine.

Operating System
Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
Processor
3.20 gigahertz Intel Core i5-3470
128 kilobyte primary memory cache
1024 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded
Board:
Gigabyte Technology Co., Ltd. H77M-D3H
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. F5 03/29/2012
RAM:
Slot 'ChannelB-DIMM0' has 8192 MB
Display:
NVIDIA GeForce GTX 660 [Display adapter]
Samsung SyncMaster [Monitor] (24.0"vis, s/n YCUYHVDZ702086, July 2010)
Audio:
NVIDIA High Definition Audio
VIA High Definition Audio

Corrupt Image file stuck in Camera roll - please help

I downloaded a background the other day for my iP4, and went to import it to iPhoto today. It apparently is corrupt (it says it's a JPEG but iPhoto says it can't be read) and also is unopenable on the phone itself. So it basically wont leave my Camera Roll nor will it open on the phone or on the computer.
I downloaded iPhone Explorer for my Macbook and "deleted" the file and its data in MISC but now it is just a black thumbnail. The photo whether how it originally looked as a thumbnail or the black thumbnail it is now can never be opened on the screen. Therefore I never could delete it from the camera roll "normally" and still cannot.
I just restored my phone hoping the Camera Roll would perhaps delete itself. Sadly, it did not, but it was worth a try. Is there a way to access a previous backup from let's say last week before I saved this photo? A delete from iPhoto also isn't working.
Also, the phone was never jailbroken, etc. It's in tip-top shape, except for this annoying corrupt file.
Any ideas? Thanks in advance.

Photos in the Camera Roll are included with your iPhone's backup. When restoring your iPhone with iTunes from your iPhone's backup, what is available in your iPhone's backup in regards to the Camera Roll is restored with it.
iTunes has a single backup for the iPhone which is updated as the first step during the iTunes sync process. A new backup is created when restoring your iPhone with iTunes and I believe a new backup is created when installing a firmware update. The previous backups remain available to select.
Go to iTunes > Preferences and check under the Devices tab for the available backups.
You may need to end up restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup.

External Hard Drive Suddenly Loaded With Corrupt Image Files (Mac User)

I'm using an iMac with CS6. I have an external Maxtor 1TB drive that is 13 months old. I have had no issues at all with it until today, when I attempted to access a PSD file from the drive and received an error message telling me that the document was not a valid photoshop file. I looked at the directory at this point and noticed that the preview icons for many of the photoshop and jpg files on the drive were disabled. In each of these cases, the files will not open.
I have:
1. Repaired permissions and volumes on the external drive.
2. Changed the file extension and attempted to open.
3. Opened the file in a hex editor and looked for extra lines of code, or text, or whatever.
4. Copied the file to a different drive.
5. Attempted to open in a different program (Preview, Illustrator)
In no cases will the files open, and I'm stumped. The drive itself seems to be working fine. Not every file is affected, and the files that are affected are both in a variety of locations on the drive and were created over a period of years. Any ideas about how to resolve this issue will be sincerely appreciated.

thx1138b wrote:
I looked at the directory at this point and noticed that the preview icons for many of the photoshop and jpg files on the drive were disabled. In each of these cases, the files will not open.
In no cases will the files open. The drive itself seems to be working fine.
If you open the folder in Bridge and the thumbnails just show icons try purging the cache. Go to Tools/cache/purge cache for xxxx folder. Let thumbs rebuild and if you still have just icons for those problem files I would say the drive is not working fine.
The problem may be intermittent, but I would have very little faith in it. See if you can find other programs to test the drive for bad segements and read/write operations.
If you put files on this drive also put the same file on another drive at the same time until you get this figured out. Drive failure is not the uncommon.

How do I move image files from my aperture library to an external hard drive?

I want to free up space on my MacBook Pro by moving most of my image files to a new external hard drive. I want to manage these image files with Aperture as referenced files. I've read much about importing from external drives, leaving the original image file on the external drive, and managing as a managed reference file. But but I haven't seen anything in the literature yet that tells me how to free up space on my laptop's drive.

The screen shot got messed up so its hard to tell what part you're asking about. But if you're asking about this part of the window:
That's were you setup the folders that the originals will go into and how you want the originals to be named (if you want to change the way they are named)
The Subfolder format box defines how the subfolders will be named. IN the image above the subfolders will be named by the image date. A folder for the year, a folder under that for the month and then a folder under that for the day. Then finally the original files.
The name format sets how the originals are named. In the case above they would be named by the version name followed by a sequence number.
regards

Is there a way to change the image numbers in a file in Aperture?

Is there a way to change the image numbers in a file in Aperture? We shoot with two photographers and so the img numbers are not in order but I would like to have the photos in chronological order on the disc when I give it to them. Does anyone know how to do this? I have them all in order ready to go in Aperture but when I move them to the disc to be burned they default back to the img number order. Thanks for your help!

What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
You can create custom names with appended numbers, when you export your image files to be saved on a disk.
Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
Regards
Léonie

WDS Server 2012 R2 "The specified image file is either invalid or corrupted"

Hi,
I'm trying to setup a WDS in a 2012 R2 environment but I cannot add install image for x64 architecture.
I've managed to add boot images from both x86 and x64 architecture and install image for Windows 8.1 x86.
For everything else I receive the error message "The specified image file is either invalid or corrupted". The images used for setting up the install are 100% functional (I manualy installed the OS from them).
I tried to unconfigure, reconfigure, reinstall role, install on another machine, everything without success.
Thanks!

Hi Costache Cristi,
What account you are using when you meet this issue, please use the
domain administrator permission account to import image or please try give your image source everyone full control permission then monitor again, it seems is the permission issue.
More information:
Windows Deployment Services 101
https://technet.microsoft.com/en-us/magazine/2008.08.desktopfiles.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My Vista system crashed due to a corrupted windows file. When I reformatted C:/ & reloaded firefox & tbird, my bookmarks were gone. I have an image of the drive , but I don't know how to recover them and get the data back where I can access it.

Vista system crashed due to a corrupted system file. The C drive was reformatted, and windows reloaded, along with the rest of my programs.
Before the drive was reformatted, an image was made of it on a USB drive to save all the data. Now I need to know how to get the Bookmarks back for Firefox, and the Address Book back for Thunderbird.
Thanks

Thanks for the quick response. It worked very well, for both Firefox and Tbird.
One hitch, until I remembered: those are all hidden files, in hidden folders. I had a devil of a time finding the "roaming" folder, until I found out how to unhide everything. In years past, I used DOS for that kind of thing. Explorer is much less user-friendly. Now that I know how to do it, it's simple.
Thanks again for the guidance

Corrupted image files in Aperture 3.0.2

Similar Messages

Maybe you are looking for