Corrupted itunes after upgrading ILife 08

Installed ILife 08 over the weekend and just tried to open up ITunes and the following msg appeared "This copy of Itunes is corrupted or is not installed correctly" Please advise on perhaps what I need to do. Have i totally lost everything???? Has anyone else experienced this after installing ILife 08? Thanks of any insight...

HI Lisa and Welcome to Apple Discussions ...
It sounds like you already had iTunes on your Mac and then installed another version of iTunes that's part of the iLife 08 suite of software.
Back up your iTunes Library to an external source such as CD/DVD (if you have a SuperDrive), an external hard drive, a MobileMe account using iDisk.
Get AppZapper And use it to delete your iTunes appliations. You can drag the iTunes apps to the Trash, but that doesn't delete all the associated files... AppZapper does that job for you. Reboot and run Disk Utility and Repair Disk Permissions. DU is located in your Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, then select the FirstAid tab, then click Repair Disk Permissions. When that is finished, Quit Disk Utility.
Don't reinstall iTunes from the iLife disk. Go here instead: http://www.apple.com/itunes/download/
Just follow the instructions to download and install iTunes.
After you've done that you should be able to recreate your iTunes Library:
http://support.apple.com/kb/HT1451
Carolyn

Similar Messages

  • IPhone wont show up in itunes after upgrading to leopard and iLife 08

    Hello:
    For some reason, my iphone does not show up on my itunes after upgrading my mac to leopard and ilife 08. The phone was syncing properly before the upgrade. I also installed all the patches that were available for downloading but I did not try syncing between the main update and patches. I am running itunes 7.6 and had been running 7.5.1 before that. My iphone is on firmware 1.1.2 and I have it set to manually sync. My ipod video is syncing fine but I had that set to automatic syncing.
    I checked the system profile and the usb is showing the iphone just fine.
    Can anybody help?

    Yup. It does work, had the exact same problem, iPhone showed in system profiler under USB, and iTunes would not recognize, reinstall fixed it all. It almost looks like a permission problem after the reinstall to where some .plist files got wrong settings set, repairing permissions might work too.

  • Missing files - corrupt library after upgrade to 11.1.4

    I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past.  However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen.  I tried to do so, but it just kept repeating.  So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library.  I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
    I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
    How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
    Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library? 
    Thanks in advance. 

    I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
    No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades.  iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
    How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
    Yes, there's one on the Dougscripts web site that will crawl through a library.  In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes.  Anything already in the library it will ignore.  Anything not there it will add.

  • How to fix connecting to iTunes after upgrading to ios6

    How do I connect to iTunes  after upgrade to ios6

    iTunes on your computer or the iTunes store?
     Cheers, Tom

  • An unknown error occurred (-42110) when opening itunes after upgrading

    when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • Lost music from iTunes after upgrading MacBookPro to OS X Yosemite

    Lost music from iTunes after upgrading MacBookPro to OS X Yosemite. Has anyone had this problem? How did you re-import all your lost music? My iTunes currently only contains all of the music I have purchased from the iTunes Store but nothing that was burned to my iTunes. All of my music files still seem to be located on my hard drive within the iTunes folder but they did not re-import into the library during the upgrade to Yosemite. Thanx for your help.

    Hi OrangeOAK,
    Thanks for the question. If I understand correctly, you still have the music on the computer but need to re add it to iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Adding music and other content to iTunes - Apple Support
    Adding content on your computer to iTunes
    iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
    Open iTunes
    From the File menu, choose one of the following choices:
    MacAdd to Library
    Windows
    Add File to Library
    Add Folder to Library
    Navigate to and select the file or folder that you want to add
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

    I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • Can no longer sync Ipod to Itunes after upgrading to Itunes 7

    I can no longer sync Ipod to Itunes since upgrading to Itunes 7. When I try it freezes my Itunes and I have to force quit the application. Anyone else know how to solve this? Anyone else having this problem?
    Powerbook G4   Mac OS X (10.4.9)  

    I have the 3rd generation IPod and I thought it happened when I dropped it, but after thinking about it it did happen the same time I switched to itunes v7.
    I have to stop the auto-sync and have the ipod completely restored each time. So when I want to update my ipod I have make it an hour adventure.

  • Cant open itunes after upgrading to yosemite

    Cant open itunes on my macbook pro after upgrading to yosemite. Someone please help if they have faced similar issues.
    Thanks.

    Try Terence's instructions here  Is Iphoto gone ? i want it back!
    Pete

  • Cannot open iTunes after upgrading to 7.3.1

    Just traded my mini for a nano and upgraded from iTunes 6. I was able to install 7.3.1 (Windows XP) and sync the ipod so all of my music is on it, no problems. But after I closed iTunes after the syncing I can't re-open iTunes at all-- I get the message:
    'The iTunes Library.itl file cannot be found or created. The default location for this file is in the iTunes folder in the “My Music” folder'
    Please help!! Thanks.

    +HOWEVER, once my library finished loading into iTunes, another error message came up:+
    +The iTunes library file cannot be saved. An unknown error occurred (-1302).+
    Okay. It's sounding like there was some problem with the original library file (that you had for the previous version) that has been preventing the library update from going through properly. That would fit with the non-appearance of the new .itl file with the upgrade, and the problems with generating a new library file from the old version of the library file.
    So it might be worth trying a library recreation at this point in time. For instructions on that, the following document should be of some assistance.
    How to recreate your iTunes Library
    After the library recreation, does itunes launch properly? (without the 1302 we got from the attempt to revitalise the old library file?)

  • Problems syncing with iTunes after upgrading to OS5

    Hello,
    After upgrading my iPod 3G software to OS5, when I plug my iPod into my Mac (OS10.6.8), iTunes (v10.5) will freeze for several minutes before it can be used again. When I sync my iPod, iTunes will sync all my video podcasts to the iPod, even the ones that were already there, each and every time. I've tried resetting my iPod, but that hasn't worked. Wondering if other people have experienced the same problems and if anything has worked?
    Thanks,
    Clare

    Solved it.

  • My ipod touch is no longer seen by itunes after upgrading to snow leopard

    Just upgraded to snow leoprad and the device is no longer seen by itunes. My old ibook sees it but its itunes is not compatible. Please help...

    Try here:
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Iphone 4s not recognized by macbook or itunes after upgrading to  mac ios 10.8.5 and itunes 11.1

    recently upgraded my macbook to mountain lion os 10.8.5 as well as itunes 11.1. iphone 4s is currently at ios 7. Immediately after upgrading my computer i attempted to sync my iphone and itunes started bringing up error messages about my cloud storage and how my iphone had some sort of authorization issue, which is strange seeing as ive never had another apple account. next thing i know my device isnt even being read by itunes. tried unplugging it, using a different cord, reseting comp etcetc all the simple stuff and still no luck. it is not just itunes as my iphone is not even recognized as a device in my finder. i even restarted my iphone completely even knowing i wouldnt be able to get my music back on  it if this attempt failed and what do you know nothing changed after the restart. so now im left with no music and photos on my phone and am completely frusterated. please help

    recently upgraded my macbook to mountain lion os 10.8.5 as well as itunes 11.1. iphone 4s is currently at ios 7. Immediately after upgrading my computer i attempted to sync my iphone and itunes started bringing up error messages about my cloud storage and how my iphone had some sort of authorization issue, which is strange seeing as ive never had another apple account. next thing i know my device isnt even being read by itunes. tried unplugging it, using a different cord, reseting comp etcetc all the simple stuff and still no luck. it is not just itunes as my iphone is not even recognized as a device in my finder. i even restarted my iphone completely even knowing i wouldnt be able to get my music back on  it if this attempt failed and what do you know nothing changed after the restart. so now im left with no music and photos on my phone and am completely frusterated. please help

  • Iphone not recognized by itunes after upgrading to IOS6

    After upgrading ti IOS6 my Iphoe opende and says "configure" and then tells me to connect to Itunes. Problem is that when I start Itunes and connect the Iphone to my computer via USBport is is not recognised by Itunes and not found as a unit. What do I do? The phone will not open and doesn´t funcion.... Anyone knows how ta handle this?

    Hi there Karin01,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    -Griff W. 

  • Cannot open iTunes after upgrade due to missing .dll file

    I cannot open iTunes after a recent upgrade.
    The error is "Applepushservice.dll is missing.  Please reinstall iTunes."  Which I have now done 8 times.
    I have uninstalled everything, clear the cache and rebooted.
    Now what?  Can I download the file from somewhere else and if so, where do I install it?
    Many thanks.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for