Corrupted / missing fonts - Adobe Acrobat Pro 9.5.5

When I create a PDF using Acrobat Pro 9.5.5 from a web page (using IE 11 on Windows 7) I will often have a resulting PDF file where the letters are jumbled symbols and not the actual letters.  Or sometimes I get the error:
%%[ ProductName: Distiller ]%%
48ufllv not found, using Courier.
%%[Page: 1]%%
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
-dict-
-file-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
When that happens no PDF file is created.
Is there a way for me to fix this without uninstalling and reinstalling.  This install is part of the Creative Suite so that's a lot of disks for me to uninstall and then reinstall.
thanks!!

Under the settings file, you can open up and go to the font page. You can then select to print even if there font cannot be embedded. Something like that might work.

Similar Messages

  • How to access a missing font in Acrobat PRo XI

    I am editing a PDF using a trial version of Adobe Acrobat Pro.  The text font in the PDF is Zurich BT.  However, that font displayed below the Format DDLB, but greyed out so it cannot be clicked upon.  Instead, Adobe has replaced Zurich BT with Minion Pro.  How can I get the Zurich BT fond made available for my use?  Do I have to download and add this font?
    You can see from this image clipping that when I change the address to the new location this text appears in Minion Pro, not Zurich BT.
    Message was edited by: Franklyn I-A
    Message was edited by: Franklyn I-A added the image

    You also have to be careful with fonts. The font you download may be the same name, but a different font. Just because you find a Zurich BT font, does not mean it is the same. If you search on the internet, there are several sources of some Zurich BT fonts free. However, they may or may not be the same font. Editing is best done on the original document and not the PDF. One of the PDFs I found on the Landis site was only in Zurich font. I would think that the original file is available from the company and that should be the document you edit, not the PDF. It appears the original was created in InDesign (CS3).

  • Embed font in Adobe Acrobat Pro

    Uploaded a PDF document into Adobe Acrobat Pro from Microsoft Word. Is there a way to embed all the font?

    There isn't a way to set this during the Combine process but it's easy to change all the bookmarks in one go using the following technique:
    Open the bookmark navigation pane and select all the bookmarks (be sure to expand all subbookmarks).
    Right-click and choose Properties from the context-sensitive menu.
    Click the Actions tab and choose Execute a menu item from the dropdown.
    Click the Add button and choose View > Zoom > Zoom to Page Level and click OK.

  • How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?

    How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?   Often I just want to label an item on a map that is in PDF and want to use a simple label rather than a Text Box for labeling, but have yet to find a way to increase the font size beyond 24.   Can someone help me with this? - JML

    Read this:
    https://forums.adobe.com/thread/1468782?sr=stream&ru=2382437

  • Hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes greek letters) into pdf. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially greek

    hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes Greek letters) into PDF. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially Greek words are not accurately converted or even not converted. Please give me some suggestions to improve this issue. Regards

    Hey quantum info,
    Thank you for posting at Adobe forums. We would love to help you out.
    Could you please let me know if you have tried converting other web pages to PDF and checked if the same issue persists.
    How have you been trying to convert the web page to PDF?
    Are you trying to convert to PDF directly via browsers or using "File > Create > PDF from Web Page"  option in Acrobat.
    Let me know more so that I can analyze where actually the issue persists.
    Hope to hear from you.
    Regards,
    Anubha

  • Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
    But it's best to edit the original document and create a new pdf when finished.

  • Font issues on Adobe Acrobat Pro

    I am running OS X 10.9.4 (mavericks) on my iMac and have Adobe Acrobat Pro installed on this computer. The font we use is an older font that doesn't come pre-installed on Mac's anymore (Blair Md medium ITC-TT). I downloaded and installed the font to font books, and it seems to work okay on Word but doesn't work on Adobe Acrobat. When I convert word documents to PDF, the font changes and there is no way for me to change it back.
    How can I fix this problem? Thanks!

    Using Acrobat XI Pro.
    File - Save As Other - Spreadsheet - Microsoft Excel Workbook
    Be well...

  • Adobe Acrobat Pro XI Missing Deactivation in drop down

    I work for a small business. Plenty of users have this product Adobe Acrobat Pro XI. There is SIMPLY NOT a Deactivation button in the Help drop down. CONTRARY to what Adobe's help says online, this is NOT working and it's kind of ridiculous I have to work so hard to deactivate this product to install it again. That should be elementary. Any help appreciated so I can get my people working again using this product would be so great. Thank You

    Hi forumdweller,
    You're right; it should not be a chore to deactivate your software. You mention that you work for a small business; did that business buy a volume license for Acrobat? If so, so there wouldn't be a Deactivate option, and you'd have to contact the volume licensing administrator in your office for help.
    If Acrobat was part of a suite, then try deactivating from another product in the suite.
    Please see Activation & Deactivation Help.
    Best,
    Sara

  • Como posso encontrar uma fonte no Adobe Acrobat PRO?

    Boa Tarde.
    Eu tenho um problema no Mac que é o seguinte:
    Instalei no MAC um conjunto de letras que são designadas por tipo de letra FLUX, porém quando abro qualquer aplicativo do adobe ele encontra sem problema algum.
    Mas quando abro especificamente o adobe acrobat pro ele encontra todos os tipos de letra e não o FLUX como desejaria, o que posso fazer quanto a isso??
    Obrigada

    Hi Walter,
    The end-user license agreement allows you to install Acrobat on up to two computers. Do you have the installation media for Acrobat? What version of Acrobat are you installing, and what operating system and version are you on?
    As long as the second computer is running a supported operating system, it should be as easy as installing and activating on that new computer. Here are some documents that should help you get started:
    System requirements | Acrobat family of products - Adobe
    Activation & Deactivation Help - Adobe
    Best,
    Sara

  • Adobe Acrobat Pro 9 quits

    Why does Adobe Acrobat Pro 9 quit unexpectedly while I am making corrections on a document? I get an error message that says "Application Adobe quit unexpectedly." Then I have to relaunch.

    You have to provide mroe info for sure.
    In most instances I find that PDF document that is either corrupt or does not have embedded font crashes.
    Check fonts and PDF.

  • Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050

    Hi,
    On trying to run a failed update from Adobe, my Adobe Acrobat Pro X became corrupt and failed to open.
    I am now trying to reinstall the software, but the software does not install successfully with Exit Code: 6 and the following key warnings and errors:
    WARNING: DW022
    WARNING: DS013
    ERROR: DW006
    ERROR: DW050
    The full error message is as follows:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ... WARNING: DS013, DW022 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 6 warning(s)
    WARNING: DW022: AdobeCode {AC76BA86-1033-F400-7760-000000000005} NonAdobePayload Acrobat Professional 10.0.0.0 with version (2012-03-05 05:30:16.288604) already installed with incompatible version (2011-03-17 01:56:17.451315)
    WARNING: DS013: Payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed
    Please help! I uninstalled the corrupt version X before this installation attempt.
    I also still have Acrobat Pro 9 on my machine as backup (for this precise reason) but don't believe this is the problem as they have co-existed without a problem for near a month now. The corruption in version X occured after this morning's failed update from Adobe.
    Many thanks,
    K

    Thank you! That did indeed do the trick
    Must have been a font or something causing the problems, as opening in safe mode allowed the software to install correctly.
    Thanks again!!
    K
    Date: Fri, 31 Aug 2012 05:28:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050
        Re: Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050
        created by techkid123 in Downloading, Installing, Setting Up - View the full discussion
    Hi.
      The error message as displayed in the above error log is EXIT CODE 6.
    Please try and follow the below mentioned KnowledgeBase Doc
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Hope it Helps
    Thanks
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4662988#4662988
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4662988#4662988. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Adobe Acrobat Pro in Windows 7 w/ Autocad in XP Mode- not working

    I'm running Autocad Arch Desktop (ADT) in Windows XP Mode within Windows 7, and have Adobe Acrobat Pro installed in Windows 7.  Unfortunately, no "Adobe PDF"  pulldown was created within ADT once Adobe Pro was installed, and there isn't any sign of Adobe in ADT (normally, Adobe automatically installs pulldowns within ADT once installed).  Adobe and ADT function normally otherwise.  Does anyone know how to get Adobe Acrobat Pro in Windows 7 to recognize and work with ADT in Windows XP Mode?

    Can you tell me how to set the defaults to Courier 10pt font?  I tried select all and it's grayed out, but that was after the
    fact.  Where are the original default presets?
    Thank you in advance.

  • Adobe Acrobat Pro failed to print pdf file

    I downloaded adobe acrobat pro and started the 30 trial version just a few minutes ago.
    I could open files through adobe acrobat and convert word files to pdf, but when i tried converting a publisher file it could not go through. An error popped up which read "Adobe PDF printer failed to print pdf file".
    The publisher file I am hoping to convert to pdf is a 21 page panorama article. It contains lots of images and a variety of font types.
    I do not know other alternatives for solving this issue.
    Your help will be very much appreciated.
    Thank you!
    Erik

    It seems to be that Adobe Acrobat virtual printer is not properly installed on your PC or you are not selecting Adobe PDF printer to print PDF document. Checkout the below screen shot to see proper printer.
    After trying this if you have same problem you may trt some other virtual printer that easily convert or print any file as PDF, you may checkout here.

  • PDF files opens in Adobe Reader  9 but not Adobe Acrobat Pro 9

    After one of my users digitally signs a PDF file, and saves it, he cannot open it again.
    He gets either a reference memory error or a Font Capture error.
    I can open the same PDF file with Adobe Reader 9 and Adobe Acrobat Pro 8.
    If  I take the same file to a system with Adobe Acrobat Pro 9 - same error on the same file.
    Happens to my administrator account as well.
    Acrobat Pro 9 version: 9.4.1
    Adobe Reader version: 9.4.1
    Acrobat Pro 8 version: 8.2.5
    Windows XP SP3
    IE 7
    Acrobat Pro 9 has been completely uninstalled, the system rebooted, and the software reinstalled.
    Customer's profile has been rebuilt.
    The error message in the event log are:
    Event Type: Information
    Event Source: Application Popup
    Event Category: None
    Event ID: 26
    Date:  1/31/2011
    Time:  12:56:02 PM
    User:  N/A
    Computer: XXXXXXX
    Description:
    Application popup: Font Capture: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".
    or
    Event Type: Information
    Event Source: Application Popup
    Event Category: None
    Event ID: 26
    Date:  1/31/2011
    Time:  1:13:06 PM
    User:  N/A
    Computer: XXXXXXX
    Description:
    Application popup: Adobe Acrobat Pro: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".

    So the option was already checked when opened the document. I went ahead and unchecked, closed, reopened just to test and it's still not displaying correctly.
    In response to Bill@VT. The image is on top of a white background so I can't tell if there is space there or not, it's just all white.
    She showed me another document that's doing something similar today. This time the pdf was done with a green background and now the background shows as white. It was created the same way with Indesign and it shows fine in Reader and the Windows preview pane just not Acrobat. I'm trying to get the user to find the installation media so I can remove and reinstall, but I'm not sure if she will be able to find it.

  • Problem with pdf-printing in Adobe Acrobat Pro

    Hi,
    I have Adobe Acrobat Pro 9.4.3.
    PDF-printing has always worked great but suddenly there is some kind of problem.
    After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
    So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

    You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
    You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
    Read about the problem here: http://www.tidbits.com/article/12078

Maybe you are looking for