Corrupted music files and won't play on external speaker

My new Touch is starting more and more to corrupt some of the music files with pops and jitters and silence. It will also occasionally go into a mode where it will not play on internal speaker. It has no volume bar either. I have to reset all settings to get it back working. I noticed this started after connecting to a blue tooth system in my car. (Ford's Sync system) I don't know if the IPod is going bad or if the bluetooth connection caused problems. I won't do that again! Ford's Sync acted unhappy too. Any suggestions are really appreciated.

Note that the corrupted music is now when I am listening to head phones not on the Ford Sync. Looks like others are having trouble with Ford Sync?

Similar Messages

Burning a cd...it's a cda file and won't play on a stereo

Hello
I'm currently trially adobe audition 3.0 with a view to purchasing the programme if this trail run shows the software does what I need it to do.
I am trying to burn a mixdown track which ends in the extesion .wav
However when I burn this track onto a cd, the extension changes to .cda and while this track now playsback on my pc it will not play on my stereo which is what I need it to do.
Any advice?
M

muffpunch wrote:
I am burning the cd via Adobe Audition 3, so I'm not sure how I'd finalise it?
Neither am I - you don't get that option on a disk-at-once system, which the Audition one is.
The CDA extension is correct, but there's a good chance that one or more of several other things may have happened. The most likely, since this CD appears to play on your PC, is that the CD player you are playing it on doesn't like low-reflectivity CD-Rs - that's extremely common, even amongst ones that claim that they do. The second thing is simply that you burned it too fast - and that's something that unfortunately it's rather easy to do in Audition. The third common problem is that you are using cheap blanks with even lower reflectivity than normal CD-Rs - that's never good news.
So - get some decent, relatively new blanks of a recognisable brand, use the slowest burn speed you can, and try again. And try it in a few different players as well. Chances are that this is all that's wrong - and you will have this sort of problem to deal with whatever software you use.

HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

I purchased a song that is a corrupted file and won't download - how do i get that song or get a refund as i already have been charged

i purchased a song thats a corrupted file and won't download - how do i get this song or get a refund as i have already benn charged ?

http://support.apple.com/kb/HT1933
Regards.

Garageband - "System Overload. The audio engine was not able to process all required data in time. (-10011). Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play.

Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play. Ive worked so hard on this and I don't know how to fix it. I am not very skilled or knowledgable in computers and barely know how to operate Garageband as it is. I have many different tracks in this song for different drums and beats. Please someone tell me how to fix this, I'm not even finished it! And again I am not very informed on how to work computers as well as most of you are, just saying. thanks!!!
P.S.: In my about this mac thing, it says i have version 10.9.1, 2.26 GHz Intel Core 2 Duo, and Memory is 2 GB 1067 MHz DDR3

Could you do this?
Go to Finder
Go to Applications
Go to Utilities folder
Launch Activity Monitor app
go to its Memory tab on top
tell us what you see at the very bottom?
Here is a sample of mine.
I bet your page/swap amount will be huge.
If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time.

After the update iTunes keeps crashing and won't play any of my music and keeps restarting my phone.

After the update iTunes keeps crashing and won't play any of my music and keeps restarting my phone.
Anyone else have this problem and resolved it?
Thank you!

Well, I hadn't rebooted after the 7.1.1 upgrade, but obviously I had to restart iTunes. After I rebooted my iBook iTunes worked... Maybe the 7.1.1 update should be marked with a must reboot?

'Music' displays but won't play. Settings appear correct and iPhone is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

'Music' displays but won't play. Settings appear correct and iPhone (3G) is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

Thank you for the replies.
Appearane of 'Music' functions (I>> > II <<I, plus volume slider) on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged. When using home sharing this same problem persists regardless of what output is selected.
Hope that may prompt a thought somewhere.

I deleted all my music files and then emptied the trash.. I didn't know that I wouldn't be able to play those songs in iTunes anymore.

I deleted my music files and then emptied my trash bin and later realized that I can't play the songs in iTunes anymore if the files are delted. Is there anyway I can recover all the files?

1) If you bought them from Apple you canprobably download them again.
2) If you back up your computer as you should, they will be on the backup.
3) If you stop using your computer this instant (because as you use the computer it overwrites deleted files even if you have lots of space), buy recovery software ($100+), there is a chance you can recover some of them, though they may have lost filenames and will be in quite a mess.

Music shaded grey and won't play

some of my music in my library is shaded light grey and won't play. i have tried deleting and redownlaoding but nothing seems to change it from being shaded grey to being bold and able to be played - frustrated and please help

I bought an iPhone 5 and could not add music to it. Same problem: grey songs. After hours searching forums and blogs I found this solution. Works for me! Now I manually add songs using iTunes and no problem. Hope it helps.
1. Download and install iExplorer http://www.macroplant.com/iexplorer/
2. Plug in device first, then open iExplorer
3. Delete the iPhone\Media\iTunes_Control folder (you may want to copy this, just in case)
4. Restart the iPhone / iPad
5. Start iTunes. Not restore iPhone from back up, select New iPhone (don't worry, you will not lost apps or data on your iPhone doing this)
6. Add music manually with iTunes

Music Loaded but Won't Play

I have a 160GB iPod and a lot of music on iTunes (approximately 31,000 tracks using 147GBs). The music comes from several sources -- iTunes purchases, CD rips, e-Music, Amazon.com, and other downloads. My problem is that when I sync the iPod (attempting to load all my music on it) and eject it, the iPod indicates that it is holding only a portion of the music in iTunes (e.g., 23,274 tracks) and won't play any of them. When I try to use Coverflow on the iPod, it doesn't respond. If I hit play on the Artist or Album list the iPod reads No Artist/Album. The Search feature is unable to locate any tracks on the iPod. If I try to load only a portion of my music (e.g., all music by bands whose names begin with the letters A through O), I can load and play the music on the iPod. Of course this isn't why I bought the 160GB iPod -- I wanted to load all my music. I have tried this with 4 new 160GB iPods with the same results. So I spent a considerable amount of time trying to clean up my music files by converting them to AAC hoping this would correct any conflicts or corrupted files. It doesn't seem to have helped and no one at Apple Support has any ideas. Has anyone experienced this problem or have suggestions?

Well, my first thought is your iPod is full. Remember, though it is called a 160GB iPod, this means 160 billion bytes. This translates to approximately 149GB (as computed by the iPod or any other computer). If you account for overhead such as album art, games, operating system, library database, etc., the iPod may just be filling up prior to completion. I do not know what happens in such a case.
And the reason for the discrepancy - hard drive manufacturers use Base10 when marketing their wares; computers (PCs, Macs, whatever) use Base2 when computing drive size (or memory size, for that matter). So, 160 billion is (10^9)*160. However, the computer computes 160GB as (2^30)*160 (or a little over 171 billion bytes). Designating GB as 1 billion bytes has been standard marketing for the past 20 years.

Here's a fix for uploaded files that won't play.

Is this you? You've found a lot of files were uploaded, instead of matched. Some of those files might even be on albums where other tracks matched. Sure you want them ALL to match, but meantime, it would be nice if uploaded files would actually play! Sure, you can see their names, track durations, etc. but if you try to play them directly, nothing happens and if you try to play an album through, when it gets to an uploaded track, it stalls or skips past it. You've checked the file type and it's an AAC so you figure it can't be a file encoding incompatibility problem and besides, whatever the file type, Apple is red-flagging anything incompatible, tells you it's ineligible, right?
Guess Again - not all AAC files are produced with the same encoder and some of them, while they'll get past Apple's eligibile/ineligible screening process, probably shouldn't.
I routinely record vinyl using Audacity and at various times I've used different encoders (not that I knew it until now). As a result of checking which uploaded files play and which do not, I'm pretty confident of the following. While some AAC files created outside of iTunes might work, those encoded using Lavf52.36.0 will not. Neither will files encoded using Lavf52.64.2. There may be others.
So what's the fix? The same one recommended for getting files flagged by Apple as ineligible to pass muster. You need to make an AAC copy in iTunes and swap that for the uploaded files that won't play.
Here are the steps I use to get it done. You may be able to streamline the process though.
(1) Turn off wi-fi to prevent iTunes Match from attempting to match any new files until you're good and ready. If you don't to this, you may end up with files you've just created being flagged as duplicates.
(2) Select all files in an album that has some bad uploaded files. Select Advanced > Create AAC Version. (NOTE: I don't bother trying to separate uploaded from matched, just too much hassle.)
(3) Select one of the files, so you can File > Reveal In Finder. Generally this will get you to the album folder that includes both sets of tracks. The ones you just created will have a "1" in the file name.
(4) Create a folder on the desktop and move all the newly created files to it. Delete the "1" from the file names. Name the folder based on album title.
(5) In iTunes, delete the listings for the newly created files.
(6) Turn on wi-fi and wait for iCloud to reconnect. Watch the cloud icon - it'll tell you.
(7) Delete the album from iTunes (You're now getting rid of the copy that was originally uploaded, so be sure you've really got the new AAC files handy to replace them with). Note you will see an option to delete from iCloud too. Check it. You want these files GONE!
(8) Select Store > Update iTunes Match. If you do a search for the album from an iCloud enabled iOS device (I use Apple TV) after the update is completed, you shouldn't be able to find the album.
(9) Select File > Add To Library and go get the folder of tunes you created.
(10) Run Update iTunes Match again.
(11) Watch the iTunes progress bar. Once the matching process has checked to see if you've added anything to your library, you'll see fresh copies of your songs uploading.
(12) As another means of confirmation, once several of the songs have uploaded, do an iOS device search for the album. You should be able to get the album to appear before the upload is complete. You may have to back out of the search and back in to get it to work, but chances are when you first see the album, the song titles will all be grayed out. Once the update is complete, give it a minute and everything should become available to you.
(13) Pick a track that wouldn't play before and watch to see if the timer starts to move, followed by music! It is now time to do a little happy dance.
I know this is a far cry from figuring out what it takes to get songs that should match to actually do so, but that's a whole different ball of wax.

Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
Sean

HT1657 The movie I rented has somehow corrupted on my ipadnand won't play, all I can do is delete it but says I'll have to pay again if i download it again, what should I do.

The movie I rented has somehow corrupted on my ipadnand won't play, all I can do is delete it but says I'll have to pay again if i download it again, what should I do.

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Zen Touch 40 GB: problems transferring music files and playli

Hi,
Creative Zen Touch 40 GB, one year old<
[color="#330000">PlaysForSure Firmware 2..0<
Creative MediaSource Organizer 5.0.38<
Creative?Sync Manager 5.0.9.0<
Windows XP Service Pack 2<
527?music (.wma) files on the player; 4205 MB of free space<
I'm finding it increasingly difficult to?transfer music files and playlists to my Zen Touch player now that the amount of free space on it has fallen below 5 GB. More often than not, it's necessary to put the player into Recovery mode, perform a clean-up, and then reboot and rebuild the library before Sync Manager works properly. I often need to repeat this process several times before I can transfer anything. Increasingly, too, Windows fails to detect the presence of the player when I connect it to my computer. Rebooting both the player and the computer usually fixes this issue. Transferring files by dragging and dropping in Windows Explorer is obviously much quicker than using Sync Manager, but here again I keep running into problems. It's as if the player freezes and refuses to take on-board any more files. Also, I can't find a way to transfer playlists except with Sync Manager. Are these known problems? I recalling running into similar issues with the Zen Touch 20 GB a few years ago. And could the fact that I'm doggedly using an old (998) and underpowered computer be an issue? I'm thinking of replacing the computer anyway, but is it likely that these synchronization problems would diminish or disappear altogether if I were to upgrade to something speedier?Thanks for any insights,Pete

I too have a simular problems! Managing music is the biggest problem with over 0 Gigs. Some artists songs sometimes change name titles, artists,?and etc. Win Explorer is most used by me now. Yes, I do lose sync from time to time! Especially when I open two windows on the portable zen. There are two tools that need. . Playlist management - it takes too long to do it on the player. I want to create "Gym Vibes" and had it on my old creative?Nomad player, but couldn't transfer. "Creative Sync Manager" doesn't do it!?Without all that sync stuff how can I create and edit creative's playlist on a PC?2. A method for detecting dupicates?This is my second creative portable and if I don't get the tools I won't buy another!

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

Corrupted music files and won't play on external speaker

Similar Messages

Maybe you are looking for