Corrupted operating System.
My HP Split 13 x2 will not turn on. The screen says it is scanning and repairing drive (C: 1 % complete. The screen does not move from this spot. What do I need to do to fix this 1 year old computer?
Hi there @Colorocks
Welcome to the HP Support Forums.
I understand that you are haing trouble starting up your notebook, as it seems to be stuck trying to scan or repair your hard drive. I am happy to help you with this.
The unforunate thing is that it is possible that the hard drive has failed. If I were you I would attempt to recover or backup as much data from the drive as you can before doing anything else, just in hopes of avoiding data loss.
This page shows some options you can try.
How to Recover Data from the Hard Drive of a Dead Laptop -eHow.com
Also, please post the full product number and verify the operating system in use on your notebook. See the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
With that I can find the correct support information for your device as well as any drivers.
Obviously as you try to recover data from your drive, you will find out if the drive is the problem or if it is something else, but the main thing at first is to try to protect your data. Once it is backed up, then there are several things you can try.
Computer does not start (Windows 8)
Also you assuming the drive is not faulty, and assuming you have previously backed it up, you could try a system recovery.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
Here is a video I found on youtube that shows a way to get around the scanning issue, that may work for you.
windows 8 stuck on scanning and repairing drive fix - youtube.com
Let me know if any of this was useful to you, or if you need any further assistance, or if it is a faulty drive.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!
Similar Messages
-
Do I have a corrupted Operating System?
I've been having a myriad of issues (listed below) on my 2010 MacBook Pro. Here's what we've done Hardware-related to date:
1) Replaced Logic Board
2) Ran full battery of tests including RAM tests (which all check out fine)
3) Replaced Hard Disk
Computer is still acting up. Here are some random issues:
1) Spinning beach ball, sometimes for 15-20 minutes for no reason when opening a light application like Mail or Safari
2) Computer unresponsive for no apparent reason at times
3) Login screen freezes for 5-10 minutes every once in a while - no mouse/keyboard actions work. Just completely frozen.
4) Can't change certain print settings when printing a document (completely strange)
Do you guys think this is a case of a corrupted Operating System requiring a fresh, clean install of OS X 10.6.6???
Will that fix these issues? I have no idea what else it could be - that would be the last step
We haven't replaced the Memory, even though I think that could be the culprit...K-Mode wrote:
Do you guys think this is a case of a corrupted Operating System requiring a fresh, clean install of OS X 10.6.6???
Will that fix these issues? I have no idea what else it could be - that would be the last step
That should usually be your first step. Install a factory fresh OS and use Carbon Copy Cloner (or Disk Utility) to make a clone. Then, if you have some application like anti-virus that is causing all these problems, you can more easily find it. -
Operating system corrupted, wont boot. Any way to get admin rights in cmd prompt?
My operating system has gotten totally corrupted and no longer boots. I get a recovery screen that tells me my registry is corrupted. File: \Windows\system32\config\system, Error code 0xc000014c. I have no recovery media (my computer, a refurb, did not com with any) I want to wipe the hard drive totally clean and do a fresh clean install. I can get to the command prompt through the system recovery by hitting esc at boot up but it wont allow me to reformat the hard drive because of write protections. I tried turning off the write protections at the cmd prompt level but it fails because I cant access it with admin rights. The only way I have found to turn on admin rights for the cmd prompt in online searches is to do it from inside the win8 operating system. Obviously I cannot do that as the OS is too corrupted to be run. Is there any command I can use at the dos prompt that will turn on admin rights? Or better yet just some way to force a total reformat?
Thanks!Are you following this? No need for command prompt. Just choose Recovery Manager.
Windows 8 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&tmp_task=solveCategory&cc=us&dlc=en&lc...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Operating System(Windows 7) got corrupted ..!
Hi all,
Can someone please help me with my laptop issue ???
My Laptop Details :
Product name : HP Pavilion dv6 Notebook PC
Operating System : Windows 7 Home Premium
RAM : 6GB
Processor : Intel(R) Core(TM) i3 CPU [email protected](2400MHz)
Purchase : Decemeber, 2010.
My Laptop problem :
My HP-laptop got infected with "virus" ( it says like found 38 virus).
And because of this virus attack , I was NOT able to open any application , for example say if i try to open "notepad" - then throws a message like " unable to open notepad application, though infected with virus".
So with this , i can confirm that my laptop was NOT allowing me to open anything because infected with virus.
Now i have 2 options to go further :
1) Remove virus , using antivirus removal software ( This i don't have , so NOT attempting to use)
2) Recover thru recovery option.
When i purchased this laptop , the laptop contains recovery partition within the laptop , so it's a built-in option.
Though i was NOT interested to keep that recovery partition in my laptop, I just burned recovery manager into 7 DVDs, and then deleted the partition.
With this my laptop contains drives like :
C: drive --> this contains OS related stuff
D: drive --> this contains my general stuff like songs , movies , etc
System drive --> 199MB ( not sure what thid contains )
Now coming to original problem/issue -
I have planned to use recovery DVDs , to recover to factory state.
Started with 1st DVD , it went upto 18% and then asked me to insert 2nd DVD.. and this went upto 30%.. now again asked me to insert 3rd DVD.
With 3rd DVD.. it went upto 40% , and then stopped responding. Nearly I've waited for about 3 hrs.. but NO use.. it's still hanged at 40% only.
So with 3rd DVD , it got hanged or stopped.
My doubt - not sure whether my 3rd DVD got corrupted or not , but i don't think so.. because 3rd DVD worked for atleast 10%..
Finally , I was struck here...
Not sure what's my next step
Please help me what I have to do now, like what steps to take... etc
How to recover?
Thanks
KiranHi,
Lets start with your providing the complete product name or product number.
HP has produced and brought to market perhaps more than 10,000 models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which one you own and which operating system is installed.
Method #1: If the notebook will boot into Windows you can retrieve your Product Number by pressing Fn + Esc key. You can also read the Service Tag (if present) attached to the bottom of your notebook\netbook.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name. Please post one or both of them (with all alphanumeric characters here). If you live outside of North America, it helps us if you post the country of purchase.
Were you using an antivirus product (free or paid) when this issue happened?
What was the brand and product name of the Antivirus product?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
I don't know if the bug exists in the program or the "Creative Cloud.
Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?Entering the serial number is probably part of the registration process.
Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted? -
I am updating a new IPAD to the latest version from ITUNES. The update is not complete and has stopped. What is the procedure to restart? If I close ITUNES i get a message that the IPAD is updating. Will closing the application cause the update to be corrupted and thus the operating system? Will the same occur if I power the IPAD down or disconnect it vis the USB port?
Help!!!routnom wrote:
AppleWill - when i closed the app and restarted Itunes, I had to go thru a Restore process. The restore goes to certain point and stops. It seems at the same time as the Update stopped. I can Force a stop and reboot the computer and try again. It possible the screensaver interrupted the restore? It doesn't sound right. Any suggestions?
You may also want to go to:
~/Library/iTunes/
This is done by going to the "Go" in the Finder and select Go To Folder. Copy and paste:
~/Library/iTunes/
In to Go To Folder selection. Look for a folder called iPad Software Updates. Delete anything in that folder and re download the upadate. -
No operating system installed or corrupted partition
I have a MacBook Pro and wanted to setup Boot Camp 2.0 so that I could run windows in order to install programs neccessary to manage my Blackberry.
I partitioned the XP as 10Gb and formatted FAT 32. The XP Home CD I used was one originally for my Gateway laptop. Had to back up everything on an external HD and install Mac OS x 10.5.1 (erase and install) since files could not be moved if I had all my info on the computer. Everything went well off the clean install until I had to install boot camp drivers for windows. I could not install updated features because it was SP1.
So I found another Gateway XP Home CD this time it was SP2 (used for my mom's desktop). First, deleted the windows partition by using boot camp assistant. And tried the process over again, this time with the SP2 cd. Partition kept the same at 10Gb, but upon restarting the screen went black and said "No operating system installed or partition corrupted, press 'R' to perform system recovery". Tried 'R' but nothing happened, seemed frozen. The SP1 cd is able to get some response upon a restart, but that is not the cd I want the computer to read and set up again. Sorry for the drawn out explanation, but I don't know where to go from here...Sweet! I appreciate your help. Boot camp confuses me because I always had the thought that if you already had a win xp cd then you could just boot that up on your mac computer. Did not realize that if it is registered or tied to another computer that that would limit it, and force you to buy a whole new Win operating system.
I am just worried now that my partition/disk is messed up now after all those clean installs and unsuccessful boot camp installs and removals. I went into Disk Utility and ran a "repair disk" on my Mac HD. It came back with 9 warnings regarding SUID files that have either been modified or simply cannot be repaired. Will yet another "erase and install" from the Mac OS X Leopard cd fix all these or no? Is that the best way to go about a fix? Just want to make sure I have done no permanent damage so I can restore all my data off my external HD and possibly try boot camp againt, correctly, in the future. -
I have mac pro 2007 model given to me, I updated it to lion about six months ago, and I do not have a time machine.
Lion stopped loading before I get to the login screen,
I tried all the tips, doing a option/shift/v. I noticed several fsk_dsk errors that it could not fix on my boot drive.
Restore would not work either. The only physical copy I have is the install disk that came with the mac. I think it is Tiger.
If I put this operating system on will I be abel to upgrade it to lion, and if so will I have to pay again?The Lion Recovery Partition has its own index. Your Macintosh HD partition is the one with the troubles.
If Disk Utility cannot fix it, you may need to apply different Utilities, such as Disk Warrior.
Some readers suggest that the best disk repair is to erase the drive and restore it from your Backups.
This might be a good time to consider getting a new drive to have on hand. This would allow you flexibility in copying, fixing, and (if needed) replacing the drive with the problems. -
Dell Inspiron 560 - operating system corrupted
Hello,
I am not sure what happened but when I go to turn my pc on, it will show the main dell logo with the options to select F2 and F12 but after that, it goes to a black screen with a white cursor at the top left. I have tried booting my pc with other options such as DVD or USB. I think I downloaded the correct file on my usb to try to load the operating system back on but I still don't know how to run it exactly..if that makes any sense. The option to select F8 to set my computer to factory reset is not working. I really don't care if I loose my info, I just want my pc up and running. Any help here?? Thanks!I assume you got a Windows 7 O/S.
The drivers come with Windows 7, just go to the "Devices and Printers" and add a printer.
"Local" printer.
At the "Install Printer Driver" screen click on the "Windows Update" to dnload printer drivers from Microsoft. (this will take a few minutes).
Select the Laserjet 5 from the "HP" selection.
As far as the adapter goes, most of your local computer stores should be able to supply you with one.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
The operating system returned error 23(Data error (cyclic redundancy check).)
My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. MDBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M -
I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt. So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)
Hello,
I tried to re-install de OS from windows 7 to windows 8.1 and when the bios update driever was installed and the laptop was restaring it appeared the folowing window and message:
Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)
After that i tried a lot of different ways to get to boot device select ...but i couldn't do anything. I removed the HDD and i put it back, i've tried with holding in the same time windows +B and pressing the power button in the same time for 1..2 seconds and then i've waited for at least 1 minute..and it didn't appeared anything on the screen. I've done the hard drive check and it passed. The weirdest thing is that when i want to select a boot device to re-install again the OS, i can't see any boot device to select. I need to mention that i've formatted the HDD in another computer. I dont care about the informations from the HDD beacause i saved all the informations on another device storage.
Please help me repair this problem!!! thanks a lot!
Have a nice evening.!!!Whenever you get a message stating that the boot device not found it could be because of bad sectors on the Hard Drive. Its not necessary that the Hard Drive Test should fail to determine if the Hard Drive if its faulty or not. Sometimes even if the Hard Drive Test passes the Hard Drive will still not work because of the bad sectors in it.
Best way to find out if its the Hard Drive you can try the Hard Deive on a different Notebook which would help you determine if it's faulty or not.
Could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files.
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
Please check your notebook warranty to verify the status and order a new Hard Disk Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
This is the 2nd time in the same day that I've sought out the Apple support communities after never once having to in the 6 years that I've used Apple products. All of my Apple products (iphone 3GS, 2 ipods, an imac with snow leopard, 2 ibooks) has worked very well that I've purchased from Apple until the last two products I've purchased.
Within the last month I've purchased the iphone 4S and upgraded to Lion on my iMac. When I bought the iphone 4S I was shown that there was a new feature, iCloud, loved it! What a great idea for people like me that have multiple Apple products and now that information can be merged together without plugging in a cord!? I upgraded to Lion to have the same capabilities from my imac, to my ipad, to my iphone. The Lion operating system has had more glitches and problems than I could have ever imagined any apple product having (I've already started a discussion on how to get through to Apple that Lion needs to be reworked).
So far I've had nothing but problems with the iphone 4S, (Apps quitting, phone freezing, calls dropping, calls not going through, Bluetooth connection). After contacting support I was told to power off the phone (had already done that), and then to reset the phone (actually very easy with iCloud), but this is not something you should have to do with an Apple product that is a week old. Even after resetting the phone has continued to have the same problems. I'm considering taking it back, but I loved my 3GS so much before, and I'm expecting / hoping an update will come out that fixes all of these problems.
Is anyone having these same problems after upgrading phones?
Has anyone heard of updates coming out?
Is iCloud part of the problems I've been experiencing with my iPhone 4 S and the Lion operating system?
I used to feel that Apple was synonymous with problem free computers and gadgets. I've continued to buy and use so many Apple products because they worked so well with very few problems. Did Apple's ability to make quality products die with the old CEO?Sounds like the backup of your old phone, which was restored to the new phone, was / is corrupt. Set it up as a new device. Do NOT restore your backup. See how it behaves. I'm will ing to bet the entire problem with the phone has been caused by a corrupted backup that is now affecting your phone. Every time you restore, the problem comes with it.
I've had no problems at all with Lion or my iPhone 4S. -
Please help, The problem started with this string downloaded, and now my iMac acts like it has a windos operating system with all the lag time I encounter. Any help with a possible solution would be greatly appreciated.
ar 8 04:36:24 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback will power on, Currenttime:3/8/2013 4:36:24.009 AM - Waketime:3/8/2013 4:36:22.740 AM = Deltatime:1.268971086
Mar 8 04:36:24 r-peter-kriglowitschs-imac configd[13]: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 101 ms
Mar 8 04:36:24 r-peter-kriglowitschs-imac configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 124 ms
Mar 8 04:36:24 r-peter-kriglowitschs-imac configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 125 ms
Mar 8 04:36:26 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 04:36:31: --- last message repeated 1 time ---
Mar 8 04:36:31 r-peter-kriglowitschs-imac configd[13]: Sleep: Success - AC - Software Sleep
Mar 8 04:36:31 r-peter-kriglowitschs-imac configd[13]: Wake: Success - AC - OHC2
Mar 8 04:36:31 r-peter-kriglowitschs-imac configd[13]: Hibernate Statistics
Mar 8 04:36:31 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 04:36:54 r-peter-kriglowitschs-imac loginwindow[32]: no spins reported for this wake
Mar 8 04:51:17 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 370) - Tx time:1.258832, # of Inserts: 3, # of bytes written: 1083330, Did shrink: NO, Size of cache-file: 182304768, Num of Failures: 0
Mar 8 04:53:30 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[149]: INSERT-HANG-DETECTED: Tx time:9.994853, # of Inserts: 1, # of bytes written: 76099, Did shrink: NO
Mar 8 04:55:26 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[149]: INSERT-HANG-DETECTED: Tx time:116.215102, # of Inserts: 0, # of bytes written: 0, Did shrink: YES
Mar 8 04:55:28 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[149]: Periodic CFURLCache Insert stats (iters: 2672) - Tx time:2.341139, # of Inserts: 2, # of bytes written: 260880, Did shrink: NO, Size of cache-file: 181276672, Num of Failures: 3
Mar 8 04:55:58 r-peter-kriglowitschs-imac Safari[131]: IPCClient: Server port 0 is invalid; looking it up again...
Mar 8 04:59:23 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback WILL sleep
Mar 8 04:59:23 r-peter-kriglowitschs-imac configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 116 ms
Mar 8 04:59:24 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 08:40:31: --- last message repeated 1 time ---
Mar 8 08:40:23 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback will power on, Currenttime:3/8/2013 8:40:23.026 AM - Waketime:3/8/2013 8:40:21.740 AM = Deltatime:1.285587907
Mar 8 08:40:30 r-peter-kriglowitschs-imac configd[13]: Sleep: Success - AC - Software Sleep
Mar 8 08:40:30 r-peter-kriglowitschs-imac configd[13]: Wake: Success - AC - OHC2
Mar 8 08:40:30 r-peter-kriglowitschs-imac configd[13]: Hibernate Statistics
Mar 8 08:40:31 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 08:40:32 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 08:40:35: --- last message repeated 1 time ---
Mar 8 08:40:32 r-peter-kriglowitschs-imac configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 9022 ms
Mar 8 08:40:32 r-peter-kriglowitschs-imac configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 9026 ms
Mar 8 08:40:32 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 08:40:48 r-peter-kriglowitschs-imac ntpd[21]: time reset -0.962740 s
Mar 8 08:40:52 r-peter-kriglowitschs-imac loginwindow[32]: no spins reported for this wake
Mar 8 08:42:15 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[653]: INSERT-HANG-DETECTED: Tx time:28.749877, # of Inserts: 187, # of bytes written: 2683908, Did shrink: NO
Mar 8 08:42:25 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[653]: INSERT-HANG-DETECTED: Tx time:3.605243, # of Inserts: 9, # of bytes written: 125737, Did shrink: NO
Mar 8 08:42:48 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[653]: INSERT-HANG-DETECTED: Tx time:11.766300, # of Inserts: 66, # of bytes written: 1369133, Did shrink: NO
Mar 8 08:50:11 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 08:50:11 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 08:50:11.529 DashboardClient[158:a03] no upcoming events
Mar 8 08:58:57 r-peter-kriglowitschs-imac ntpd[21]: time reset -0.204902 s
Mar 8 09:08:48 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 439) - Tx time:0.814358, # of Inserts: 3, # of bytes written: 162168, Did shrink: NO, Size of cache-file: 181276672, Num of Failures: 0
Mar 8 09:12:01 r-peter-kriglowitschs-imac Safari[131]: Periodic CFURLCache Insert stats (iters: 3131) - Tx time:0.133983, # of Inserts: 4, # of bytes written: 1206, Did shrink: NO, Size of cache-file: 181276672, Num of Failures: 0
Mar 8 09:12:27 r-peter-kriglowitschs-imac Safari[131]: INSERT-HANG-DETECTED: Tx time:20.514255, # of Inserts: 5, # of bytes written: 2056, Did shrink: YES
Mar 8 09:40:37 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 382) - Tx time:0.332217, # of Inserts: 1, # of bytes written: 35416, Did shrink: NO, Size of cache-file: 180250624, Num of Failures: 0
Mar 8 10:03:12 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 10:03:12.433 DashboardClient[158:a03] no upcoming events
Mar 8 10:03:12 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 10:05:24: --- last message repeated 1 time ---
Mar 8 10:05:21 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 10:05:21.961 DashboardClient[158:a03] no upcoming events
Mar 8 10:07:20 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 10:07:20 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 10:07:20.524 DashboardClient[158:a03] no upcoming events
Mar 8 10:12:53 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 387) - Tx time:1.000743, # of Inserts: 8, # of bytes written: 416127, Did shrink: NO, Size of cache-file: 180250624, Num of Failures: 0
Mar 8 10:21:12 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback WILL sleep
Mar 8 10:21:14 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 15:08:05: --- last message repeated 1 time ---
Mar 8 15:07:58 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback will power on, Currenttime:3/8/2013 3:07:58.018 PM - Waketime:3/8/2013 3:07:56.750 PM = Deltatime:1.268125057
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: Sleep: Success - AC - Software Sleep
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: Wake: Success - AC - EHC1
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: Hibernate Statistics
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 7826 ms
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 7827 ms
Mar 8 15:08:05 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 15:08:06: --- last message repeated 1 time ---
Mar 8 15:08:05 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 15:08:28 r-peter-kriglowitschs-imac loginwindow[32]: no spins reported for this wake
Mar 8 15:20:07 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 15:20:07 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 15:20:07.663 DashboardClient[158:a03] no upcoming events
Mar 8 15:22:09 r-peter-kriglowitschs-imac WebProcess[137]: INSERT-HANG-DETECTED: Tx time:4.354654, # of Inserts: 3, # of bytes written: 970845, Did shrink: NO
Mar 8 15:28:49 r-peter-kriglowitschs-imac ntpd[21]: time reset -0.404104 s
Mar 8 15:29:25 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 15:29:25 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 15:29:25.685 DashboardClient[158:a03] no upcoming events
Mar 8 15:30:09 r-peter-kriglowitschs-imac DashboardClient[158]: there is already a confinement rect client waiting for delegate messages
Mar 8 15:30:09 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 15:30:09.752 DashboardClient[158:a03] there is already a confinement rect client waiting for delegate messages
Mar 8 15:33:55 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 412) - Tx time:0.454076, # of Inserts: 1, # of bytes written: 87, Did shrink: NO, Size of cache-file: 180250624, Num of Failures: 1
Mar 8 15:40:11 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 15:40:11 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 15:40:11.190 DashboardClient[158:a03] no upcoming events
Mar 8 15:45:15 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback WILL sleep
Mar 8 15:45:17 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 20:00:47: --- last message repeated 1 time ---
Mar 8 20:00:40 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback will power on, Currenttime:3/8/2013 8:00:40.015 PM - Waketime:3/8/2013 8:00:38.740 PM = Deltatime:1.274775028
Mar 8 20:00:47 r-peter-kriglowitschs-imac configd[13]: Sleep: Success - AC - Software Sleep
Mar 8 20:00:47 r-peter-kriglowitschs-imac configd[13]: Wake: Success - AC - OHC2
Mar 8 20:00:47 r-peter-kriglowitschs-imac configd[13]: Hibernate Statistics
Mar 8 20:00:47 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 20:00:47 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 20:00:48: --- last message repeated 1 time ---
Mar 8 20:00:47 r-peter-kriglowitschs-imac configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 7666 ms
Mar 8 20:00:47 r-peter-kriglowitschs-imac configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 7672 ms
Mar 8 20:00:48 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 20:00:57 r-peter-kriglowitschs-imac SoftwareUpdateCheck[800]: Checking for updates
Mar 8 20:00:58 r-peter-kriglowitschs-imac storeagent[804]: port created
Mar 8 20:01:10 r-peter-kriglowitschs-imac loginwindow[32]: no spins reported for this wake
Mar 8 20:02:09 r-peter-kriglowitschs-imac SoftwareUpdateCheck[800]: SWU: scan found 0 products:
Mar 8 20:02:09 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.suhelperd[803]): Exited with exit code: 2
Mar 8 20:02:09 r-peter-kriglowitschs-imac com.apple.launchd.peruser.501[93] ([0x0-0x7d07d].SoftwareUpdateCheck[800]): Exited with exit code: 102
Mar 8 20:03:15 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback WILL sleep
Mar 8 20:03:17 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 20:03:17: --- last message repeated 1 time ---
Mar 8 20:03:17 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 20:08:27 r-peter-kriglowitschs-imac loginwindow[32]: loginwindow SleepWakeCallback will power on, Currenttime:3/8/2013 8:08:27.012 PM - Waketime:3/8/2013 8:08:25.740 PM = Deltatime:1.271971941
Mar 8 20:08:29 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 20:08:34: --- last message repeated 1 time ---
Mar 8 20:08:34 r-peter-kriglowitschs-imac configd[13]: Sleep: Success - AC - Software Sleep
Mar 8 20:08:34 r-peter-kriglowitschs-imac configd[13]: Wake: Success - AC - OHC2
Mar 8 20:08:34 r-peter-kriglowitschs-imac configd[13]: Hibernate Statistics
Mar 8 20:08:34 r-peter-kriglowitschs-imac configd[13]: network configuration changed.
Mar 8 20:08:57 r-peter-kriglowitschs-imac loginwindow[32]: no spins reported for this wake
Mar 8 20:12:51 r-peter-kriglowitschs-imac [0x0-0x80080].org.videolan.vlc[825]: [0x100203930] main libvlc: VLC wird mit dem Standard-Interface ausgeführt. Benutzen Sie 'cvlc', um VLC ohne Interface zu verwenden.
Mar 8 20:12:52 r-peter-kriglowitschs-imac VLC[825]: ERROR: <PXSourceList: 0x10025d1a0>: Attempt to set unknown item as dropItem=<SideBarItem: 0x1002fb4b0>.
Mar 8 20:12:55 r-peter-kriglowitschs-imac [0x0-0x80080].org.videolan.vlc[825]: [wmv3 @ 0x102388c20] Extra data: 8 bits left, value: 0
Mar 8 20:12:57 r-peter-kriglowitschs-imac VLC[825]: *** __NSAutoreleaseNoPool(): Object 0x101e078c0 of class NSCFNumber autoreleased with no pool in place - just leaking
Mar 8 20:13:16 r-peter-kriglowitschs-imac [0x0-0x80080].org.videolan.vlc[825]: [wmv3 @ 0x100853420] Extra data: 8 bits left, value: 0
Mar 8 20:16:06 r-peter-kriglowitschs-imac [0x0-0x80080].org.videolan.vlc[825]: [wmv3 @ 0x100991020] Extra data: 8 bits left, value: 0
Mar 8 20:16:06 r-peter-kriglowitschs-imac VLC[825]: *** __NSAutoreleaseNoPool(): Object 0x101e078c0 of class NSCFNumber autoreleased with no pool in place - just leaking
Mar 8 20:18:39 r-peter-kriglowitschs-imac [0x0-0x80080].org.videolan.vlc[825]: [wmv3 @ 0x1021f5220] Extra data: 8 bits left, value: 0
Mar 8 20:29:15 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 20:29:15 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 20:29:15.963 DashboardClient[158:a03] no upcoming events
Mar 8 20:31:21 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 443) - Tx time:0.228094, # of Inserts: 1, # of bytes written: 418, Did shrink: NO, Size of cache-file: 180250624, Num of Failures: 0
Mar 8 20:38:51 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming events
Mar 8 20:38:51 r-peter-kriglowitschs-imac com.apple.Dock.agent[97]: 2013-03-08 20:38:51.259 DashboardClient[158:a03] no upcoming events
Mar 8 20:41:07 r-peter-kriglowitschs-imac ntpd[21]: time reset +0.732416 s
Mar 8 21:02:31 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 374) - Tx time:0.112713, # of Inserts: 2, # of bytes written: 86, Did shrink: NO, Size of cache-file: 180250624, Num of Failures: 0
Mar 8 21:15:47 r-peter-kriglowitschs-imac com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Mar 8 21:16:17: --- last message repeated 7 times ---
Mar 8 21:25:11 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[959]: INSERT-HANG-DETECTED: Tx time:3.219070, # of Inserts: 5, # of bytes written: 780464, Did shrink: NO
Mar 8 21:26:21 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[959]: INSERT-HANG-DETECTED: Tx time:3.599784, # of Inserts: 108, # of bytes written: 1240380, Did shrink: NO
Mar 8 21:26:48 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[959]: INSERT-HANG-DETECTED: Tx time:5.506619, # of Inserts: 215, # of bytes written: 2057129, Did shrink: NO
Mar 8 21:27:39 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[959]: INSERT-HANG-DETECTED: Tx time:5.641009, # of Inserts: 246, # of bytes written: 2799365, Did shrink: NO
Mar 8 21:28:23 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[959]: INSERT-HANG-DETECTED: Tx time:5.431440, # of Inserts: 76, # of bytes written: 2366904, Did shrink: NO
Mar 8 21:28:40 r-peter-kriglowitschs-imac Safari Webpage Preview Fetcher[959]: INSERT-HANG-DETECTED: Tx time:7.176791, # of Inserts: 213, # of bytes written: 2882792, Did shrink: NO
Mar 8 21:39:56 r-peter-kriglowitschs-imac WebProcess[137]: Periodic CFURLCache Insert stats (iters: 449) - Tx time:0.052694, # of Inserts: 1, # of bytes written: 43, Did shrink: NO, Size of cache-file: 180250624, Num of Failures: 0
Mar 8 21:41:28 r-peter-kriglowitschs-imac DashboardClient[158]: no upcoming eventsProblems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/
Maybe you are looking for
-
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history agai
-
Iphone 3gs not working after update to ios 6.1.3
I had a iphone 3gs with ios4.1(unlocked for any carrier). I updated it to ios 6.1.3 and it is not working with my local carrier. I tried jailbreaking (my bad) and now i am not getting anywhere. How can I use it back for my carrier... i am ok with io
-
Can u tell some source codes of java application
can u tell some source codes of java application? i want to get some source codes .such as a proxy source code . any help will be appreciated.
-
Extend background tool in PS CS4
Before CS4 come out, some promotional video was running on adobe.com , what we can expected from it. there was video about "extend background tool" , with good my attention, because that is very often what I am doing. It was showing how ease you can
-
Why do i see multiple ids everytime i update
This the first time that it happened. I am trying to update my apps. But eveytime i click an app, a diiferent id, on which i dont know, appears. Of course i cant upDate because my password will be wrong. Its not my id. Help!!