Corrupted RAW in Bridge CC, Camera RAW and Photoshop CC

Hello,
I am using up to date versions of Bridge CC, Camera RAW nad Photoshop CC and I have the following problem.
- after transfer photos from Canon EOS 6D to computer thumbnails in Bridge seems to be fine
- when I open file in Camera RAW file seem as below example
- when I open file in Photoshop CC file seem as below example
- when I open RAW in IrfanView image seems to be fine
- I can open image in IrfanView, save as TIFF and in Bridge and Photoshop seems to be fine
- the problem occurs randomly, about 5% of images from 500 images
Do you have similar problem? Does anybody have any idea?

The previews are ok in Bridge because it's just a preview jpg, not the actual RAW file.   I'm not sure why it would open OK in Irfanview.  I had a similar problem after a HDD crash and tried Irfanview with no more luck than any of the Adobe programs.
Have you tried Adobe's DNG converter to see if you get the same result?  Is this a consistent problem, or just this one time?

Similar Messages

  • I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files

    I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
    Any insight/wisdom would be much appreciated. Thanks

    When you try to open in PS what happens?
    In Bridge do you see icons or thumbnails?
    Will it open in ACR in Bridge?

  • Beim cs2 bridge geht camera raw nicht

    beim cs2 bridge geht camera raw nicht

    In Ergänzung zu Willis möchte ich anmerken, dass Camera RAW zu Anfang wirklich nur für RAW-Daten vorgesehen war (daher auch der Name) und deshalb keine Beabeitung von JPGs und anderen Dateien möglich war. Erst mit späteren Versionen wurde die Bearbeitung anderer Bildformate nachgelegt.
    Gruß
    Bernhard

  • Bridge CC でCamera Rawが使用できません

    Bridge CC で「ファイル」→「Camera Rawで開く」がグレーアウトしていて使用できません。ショートカットの「command + R」でも反応せず。原因と解決方法をお願いします。気になる動作として、起動時に毎回起動時に「キャッシュのクリアにしっぱ。。。」とポップアップが出ます。キャッシュをクリア、アンインス トール後再度インストールしても解決せず。

    Photoshopからは開けません。Photoshopのバージョンは「CC」  2014.1.0 20140730.r.148、OSは10.9.4です。ちなみにCamera Rawで開こうとしてる画像はJPGです。なのでPhotoshopから通常開けないかと思われます。BrudgeからはJPGでも開けるので、Brudgeで開いています。ちなみにBrudgeのバージョンは「CC」6.1.0.115です。

  • Bridge Fehlermeldung " Camera RAW Entwicklung ist nicht Aktiviert "

    Seit einiger Zeit kann ich keine RAW Datein mehr in Bridge direkt öffnen und mit Camera Raw bearbeiten. Es wird immer rüber zu Photoshop geschickt. Früher konnte ich einfach auf eine RAW klicken, auf "in Camera RAW öffnen" und es wurde innerhalb von Bridge in Camera Raw geöffnet.
    Jetzt bekomme ich die Fehlermeldung "Camera RAW Entwicklung ist nicht Aktiviert" und kann Camera Raw nur noch mit Photoshop benutzen.
    Woran kann das liegen? Das Problem trat plötzlich auf. Ich kann mich nicht errinern etwas geändert zu haben.
    Camera Raw Version 8,6 (letztens geupdatet in Hoffnung dass das Problem verschwindet.. leider ohne Erfolg) Bridge Version CC 6.0.0.151

    Hallo Monika,
    entschuldigung, wenn mein Deutsch schwach ist. Hast du die Updates
    runtergeladen? Es gibt eine neuere Version im Vergleich zu der
    Originelversion.
    Gruss aus Kanada
    Jim

  • Opening multiple RAW files in Adobe Camera RAW

    Former CS6 user. Now trying CC but can't find a way to select an open only the RAW files in ACR, in a folder that has both RAW and jpeg files. There are options for select certain types of files but RAW is not an option like it was in CS6. I need to be able to quickly open many RAW files in ACR without having to ctrl-click each RAW file to avoid opening the jpeg files.

    I have more than 100 files in a folder. Half are RAW and the other half are the matching jpeg files. It is too cumbersome to use the ctrl key and select each of the 100 RAW files. You can select certain kinds of files in a dropdown box titles ALL FORMATS but unfortunately RAW files are not one of the options. In PS6, RAW files was one of the choices. I could screen for RAW files and then see only RAW files in my folder. I could then select one file, hold the shift button down and select any number of RAW files at once. I do thousands of pictures and need fast options. If all else fails I could select and open the RAW files do Adobe Camera RAW through Adobe Bridge but that adds another step.
    So if anyone can figure out a faster way to open many RAW files at once in ACR, I would appreciate the help.

  • How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4

    How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
    I can access the the download button but after I depress it
    I need specific step by step instructions from start to finish
    Morty
    [email protected]

    It would help us if you told us what operating system and version you are using.
    generic instructions
    Windows
    1. Right click on the downloaded Camera_Raw_5_7_updater.zip
        Click on Extract All
    2. In the Extract All dialog check Show extracted files when complete, then click on Extract
    3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
       In the User Account Control dialog click Yes
      Just follow the directions in the install dialog when it opens
    Mac
    1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
    2. When the next window opens, double click on the Setup.app
        In the next window enter your password
    Just follow the instructions in the install dialog that appears
    I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed

  • I keep getting 'camera raw editing now enabled, camera raw requires that a qualifying product has been launched at least once to enable this feature' i have run photoshop and the mini bridge in photoshop and it works. camera raw in bridge itself keeps giv

    I tend to use Bridge ALOT and just recently i have come across the warning message above, t won't let me open my RAW images in Camera Raw in Bridge. Please could someone help me solve this problem it has hulled my work and its pilling up behind me
    Thank you

    Details, please.  Platform, exact version of Photoshop and of your OS, what trouble shooting steps you've taken so far, etc,
    First thing to try, if it had worked before, is to Purge the Cache in Bridge.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem

    Hi,
    when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
    Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
    Now im trying beta bridge cs6 and problem come back for me again.
    I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
    Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
    Thanks
    Arménio Teixeira

    Frau S aus B wrote:
    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
    The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
    Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
    If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

  • Why do my raws look different when I view them in Adobe Bridge/Adobe Camera Raw and Canons Digital P

    Hello all,
    I am sorta new to taking Raw photographs and I have been been using Adobe Bridge/Camera Raw to edit. When I take my photos (I am using a Canon t2i) I have it set to save a raw and a jpg. When I view these images in Adobe Bridge/Camera Raw I notice a clear difference in the jpg and raw (I understand the whole concept behind raw vs. jpg. so im not questioning why one looks different) It is obvious all the adjustments that were applied to my jpg. vs the natural raw.  My question is: When I view the same two images in the software that came with my camera, canon digital photo professionals, the canon and raw look almost identical.... My assumption is that canon is applying the same "adjustments" to my raw as it did to the jpgs?  Has anyone used these two programs and noticed this?
    Thank you in advance for your assistance.
    Michelle

    Can't say I'm an expert on DPP myself either.  I've only run it a few times myself.
    If you're seeing Photoshop freeze just by looking at the File Info tab, that's certainly not expected and you should start a tread specifically to discuss that.  The forum may be able to help you get that working.
    I happen to like the color my camera delivers in its embedded JPEGs (which I use to quickly review shots via IrfanView).  Starting with that color in Camera Raw by default just feels very natural and integrated.
    Without a specific custom profile to help you with the task, here's my suggestions for the next best thing:
    1.  Take an image with a range of different colors in it.
    2.  Open the embedded JPEG also using whatever means you have to do so.
    3.  Open it also in Camera Raw and make sure you're using the Camera Raw default parameters.
    4.  Go into the Camera Calibration tab (little camera icon), and choose the Camera Standard profile as provided by Adobe.
    5.  Tweak the various sliders so as to match the color between what you're seeing in the JPEG and Camera Raw.
    6.  Save new Camera Raw defaults.
    Some notes:
    Make sure you leave the White Balance on As Shot, since storing a specific white balance is probably not going to be helpful.
    Test your settings and repeat the above to tweak them as needed using other images.
    Keep in mind that not every application does proper color-management.  IrfanView can be set up to do so, and I don't recall whether you have to tweak a default setting to make it do that or not (it's been a while).
    Hope this helps!
    -Noel

  • Edit camera raw in Bridge stopped working CS5 (and star rating removed)

    I have always had the 'double click edits camera raw settings in Bridge' setting enabled.  Half way through editing a batch of 1000 images, instead of opening in Bridge the image opened in Photoshop.  I checked the selection in Bridge, re-enabled it, closed Bridge and opened a few times, re-enabled again, re-booted my system, but it still opens raw files in Photoshop.  This is extremely irritating as I now have to switch windows every time I go to do the next edit.  I don't need Photoshop running for 90% of the edits I am doing.  I made no changes to my system during the time that I was editing.
    Any ideas?
    Stuart
    PS
    At the same time as this error occurred Bridge now removes star ratings as in the following sequence:
    1  Give image 3 *
    2  Double click to edit and raw file opens in Photoshop
    3  Edit and save image.
    4  Click done and return to Bridge
    5  The 3 * rating has been removed and the saved jpg also has 0 *
    PPS
    I have partly solved the problem.  I normally convert to DNG but did not do so on this occasion.  In the batch were files from a Canon 5D and and Canon 5D mkII.  A very small number of the 5D files have the problem above.  I converted all these to DNG and I can edit normally.  But I am still at a loss as to why some files exhibit this strange behaviour.

    The forum is not dead; moribund, perhaps. :-)
    You do realize that this is a user forum, don't you?  This is not a conduit to address Adobe.
    The volunteer contributors who give their time free of charge here respond to questions if and when they think they can help, if they know the answer to a question, and if they think the original poster has provided enough, detailed information.  No one has any obligation to answer questions.
    My use of Windows is, mercifully, restricted to an absolute minimum these days, otherwise I would have attempted to extract more information from you about your machine and system.
    At this point, I don't have more Windows tricks to offer you other than to uninstall and do a complete re-install of Photoshop.
    Therefore, the boilerplate-text advice that follows is simply meant to encourage you to provide more information so that one or more of the Windows wizards in this forum may be moved to respond to you.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them, etc.,
    someone may be able to help you (not necessarily this poster).
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Adobe Bridge CS6, Camera Raw

    Hello,
    I need urgently help.
    I'm working on a MacBook Pro with Adobe Bridge CS6 since more than 1 year, using Camera Raw, v 8.6.0.254 without any problems.
    Last month I bought a Mac Book Air and installed Photoshop Elements 12, Adobe Bridge CS6 and Photoshop CS6. But I'm still missing the possibility to open my pictures in Camera Raw.
    After downloading the actual version 7.01 of Camera Raw from the website of Adobe.com and trying to install it I got the following error report:
    UPDATE FEHLGESCHLAGEN;
    Updates konnten nicht installiert werden. Dieser Path ist für Sie nicht geeignet.
    Name of the downloaded program is: AdobeCameraRaw-7.1-mul-AdobeUpdate.
    What shall I do to get Camera Raw running?
    Thanks so much for your help
    dieter

    What camera  and version of ACR?

  • Adobe Bridge to Camera RAW

    When I open the application Adobe Bridge and right click on the image that I would like to open into camera RAW I get an error message saying "Camera RAW editing is not enabled.  Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature."  I have used it plenty of times before and I don't know why it is all of a sudden not working.  Please help me, thanks.

    Got the same message after starting the Creative Cloud Trial.  It would be helpful if Adobe explained the error message in the message or offered a link to possible solutions!
    I ran In Design CC  - which apparently is not a qualifying product yet it has a Browse In Bridge option.
    I have Photoshop CS5 installed and the CC version of Photoshop failed to install yet says it is up to date. Haven't found a solution to re-install Photoshop CC!  Possibly Photoshop CC has to be run to enable BR?

  • In Bridge CS3, Camera Raw 4.4.1. doesn't open

    I try to open ARW-files (RAW-SONY) by clicking thumbnails in Bridge CS3,
    but Camera Raw 4.4.1. doesn't open. I have all the necessary plugins installed.
    Camera Raw 4.4.1. only starts up by directly using Photoshop.
    what can be the problem?

    >Is too much asked if you send me the upgrate for Bridge
    To be honest, yes it is :-(
    The Bridge update is 58,9 MB and the PSCS3 upgrade is 170 MB
    E-mail can only send attachments from max 10 MB. If you have an ftp-account you can sent me the log in using my e-mail adress that is under my profile (double click on my name). I can use the ftp route to sent them to you.
    Since we are in the same country and I can reach the updates without problems I give you the direct links so you can try once more:
    PSCS3 10.0.1:
    International version main page:
    http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
    If you have so, the NL version Update:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3778
    Bridge 2.1.1.9:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3813
    You must have an Adobe Account but since you can answer in this forum you already should have one that you can use for it. otherwise create a (free) account :-)
    Let us know how it went

  • Canon 6D, Bridge CS5, Camera raw 6.7.1 -- cr2 files not shown

    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?

    Frau S aus B wrote:
    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
    The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
    Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
    If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

Maybe you are looking for