Corrupted render .. only when using stills in FCP.. strange ?

Built my sequence which consisted of 720p footage (from a 7D). It also contained still images from the same camera. In FCP plays back fine.
I then send to color and perform various effects.. mainly a primary in and also some color corrections.
When I render this its all garbage..
If I redo the sequence without the stills it works fine... ????
Any ideas please ? (Apart from my work around of having to remove the stills then adding back in afterward..)

Philip Green1
wrote:
Built my sequence which consisted of 720p footage (from a 7D). It also contained still images from the same camera. In FCP plays back fine.
I then send to color and perform various effects.. mainly a primary in and also some color corrections.
When I render this its all garbage..
If I redo the sequence without the stills it works fine... ????
Any ideas please ? (Apart from my work around of having to remove the stills then adding back in afterward..)
Thanks for your explanation! It is just the solution for my problem.

Similar Messages

I changed language from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US? in English

I changed language (based on an answer in this forum) from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US?
Should I just export my bookmarks, uninstall and reinstall the proper version? That may just be shorter than anything else.

GREAT!. Thanks a lot for educating me. There seem to be a million things we have to learn about our computers and when we run into them the first time they seem insurmountable. You pointed me to the solution. Thanks again. Ben

My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

Sounds that you have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
Any help would be great, Thanks
Darius

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
Any help would be great, Thanks
Darius

Dead pixel only when using Pages

One dead pixel. Always the same one, only when using Pages. Has anyone else seen this?
MacBook Air 11", 1.6 GHz Core i5 CPU, OS 10.8, Pages 4.2

This has been happening to me ever since I upgraded to Mountain Lion. Certainly a software issue, I expected an update to iWork to resolve this after the release of 10.8 but it seems Apple have all but forgotten about their iWork suite...
Below are images of the effected area when a Pages window is selected and unselected.
OS X 10.8.2 - Pages 4.3 - Mid 2011 2.3 GHz Mac Mini - 23" Apple Cinema Display (Old Alu, not that it matters)

Get ORA-01031: insufficient privileges error, but only when using dbstart.

I am getting ORA-01031: insufficient privileges error, but only when using dbstart. the listener starts but not the database. How come I can start it from SQL prompt but not from dbstart scripts as the oracle user?
[oracle@mallard bin]$ ./dbstart
Processing Database instance "gf44": log file /prod/oracle/10/startup.log
[oracle@mallard bin]$
Log file:
Wed Aug 20 10:15:02 CDT 2008
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug 20 10:15:02 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
/prod/oracle/10/bin/dbstart: Database instance "gf44" warm started.
>
oratab file:
gf44:/prod/oracle/10:Y
dbstart file section:
# See if it is a V6 or V7 database
VERSION=undef
if [ -f $ORACLE_HOME/bin/sqldba ] ; then
SQLDBA=svrmgrl
VERSION=`$ORACLE_HOME/bin/sqldba command=exit | awk '
/SQL\*DBA: (Release|Version)/ {split($3, V, ".") ;
print V[1]}'`
case $VERSION in
"6") ;;
*) VERSION="internal" ;;
esac
else
if [ -f $ORACLE_HOME/bin/svrmgrl ] ; then
SQLDBA=svrmgrl
VERSION="internal"
else
SQLDBA="sqlplus /nolog"
fi
fi
Permissions of file:
[oracle@mallard bin]$ ls -la dbstart
-rwxrwxr-x 1 oracle oinstall 10407 Aug 19 12:27 dbstart
[oracle@mallard bin]$
User permissions:
[root@mallard 10]# id oracle
uid=503(oracle) gid=503(oinstall) groups=503(oinstall),504(dba)
[root@mallard 10]#
I can start the listener manually using "./lsnrctl start" and start the database manually from sql prompt using "SQL>startup" (as sysdba) with no problems. this only happens when using dbstart file. I am logged in as oracle user and all environment variables are set
Thank you for any help you could provide.

I have the same problem, but i don't want insert this string
Connect sys/{password} as sysdbaI have deployed an Oracle 10g with os SunOS
$ uname -a
SunOS DB02 5.10 Generic_141444-09 sun4v sparc SUNW,Sun-Blade-T6320
I can connect with sys/password, but I can't login with
$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jan 7 15:19:50 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba
ERROR:
ORA-01031: insufficient privilegesthe the startup and dbshut don't work.
Someone maybe help me?
Thanks,
Regards.
Lain

TS4268 Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

iPhone 4 does not support FaceTime over cellular, only Wi-Fi.
You need iPhone 4S or later and also only if the carrier supports it,

HT201401 Microphone works only when using the phone in hands-free

Microphone works only when using the phone in hands-free (speaker on) mode. Otherwise, only a constant buzz, accompanied by regular clicks (repeating 2-3 times/sec) can be heard by called persons or when recording a memo. Makes Siri unusable, and cannot make private calls unless in a private area. Does anybody have a fix for this?

Okay I just solved the problem myself..
For anyone that may have the same issue:
The microphone used when recording video, is the little dot next to the jack on top of the iPhone 4S (maybe also iPhone 4, don't know). There was some dirt in this tiny little hole, and I simply just removed it with a very thin needle, and now it works great!

Corrupt data error when using Windows backup on Oracle

Our SAP servers include a SDLT internal tape drive that we use for doing a complete system backup. When using Windows Backup we get the following message in the backup log:
WARNING: Portions of "\oracle\T00\sapdata1\protd_2\PROTD.DATA2" cannot be read. The backed up data is corrupt or incomplete.
This file will not restore correctly.
This is occuring on a couple of different systems but the wierd thing is when this happens in occurs on one Oracle drive in one system and the other Oracle drive on another system i.e. the G: drive on our TST sysytem and the E: drive on another. The E: and G: drives contain the main Oracle datafiles.
Has anybody ever encounter something like this and what can I do about it?
Thanks;
Gale S.

Especially no backup tool would know about the
fact
that a Oracle block had been changed after it was
copied.
Now I have to contracdict
There are backup tools (e. g. OpenFile Manager from
Legato/EMC), that track the filesystem changes and
makes sure, the backups are consistent in sense of
filesystem blocks. We´re backing up some ORA
databases (non-SAP, 7.3.4 and 8.1.7) for ages now -
and I never saw this kind of corruptions.
Well, these Backup-Tools do perform copies I/O-Consistent. That's different than DB-Block-consistent in the first place. Anyhow due to the fact that the DBMS do have a syncronizing between I/Os and writing out the blocks this leads both to consistent blocks.
I just wonder, how the database would deal with such
"inconsistent" files. Given the fact, you start a
backup at filesystem block 0, the database is being
backed up and a transaction is committed and
something is written to block 100, 200 and 500. The
backup is on block 300. If you now restore the
database, it has the already commited block 500 in
the file but 100 and 200 are not yet written in the
database file. The redo will then find an already
commited transaction on 500. What magic will tell the
engine, that this is due to an online database
backup? I mean, if you set the tablespace to backup,
the engine "knows" the state - but if you just backup
the file, the engine is unaware of that... I´m just
curious how this is handled...
Well the trick here is: we tell the database before we plan to copy the data. When a ONLINE backup is done, the tablespaces are set into BACKUP mode. This changes two things for us:
1. The datafile headers of these tablespaces are not updated anymore although dirty blocks are still written out to these files. Since the control files that keep the SCN (system change number) are updated nevertheless, the database will know at recovery time that these files had been in online backup mode and do need recovery to become consistent again.
2. The UNDO-information is not only written out to the UNDO/ROLLBACK-Tablespace but additionally to the REDOLOGS. So, for the time where the tablespaces are in BACKUP mode, we have all information needed to make a block consistent again - regardless if a transaction had been commited or rolled back - in the redolog. So a full recovery of all changes is possible with
that.
That's basically the "magic" behind this.
If the copy of the datafile is done without this - well, then there's no magician in the world that would been able to get it consistent again. Online Backups with Oracle are only possible with BACKUP mode or RMAN (ok, and possible some 3rd party hacks...).
KR Lars

Rattling speakers - only when using chrome.

I brought a new 2013 MacBook air today, and I'm having a weird issue with the sound. There's a slight rattling/static noise, but only when I'm using Chrome. It's fine in Safari, iTunes, and Quicktime.
I could just not use Chrome, but I'd miss it terribly.

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. May be they can help you.
Use Safari until the problem is solved.
But you have to dowlload, install and enable Flash Player to view videos.
Best.

Burned Image on screen, but only when using Safari

I have a burned image on my IPhone's screen, but only when I use Safari. Additionally, when I open Safari's multiple window viewer feature, the image is there as well. The home screen and every other app is unaffected. Turning off and on the phone does nothing to fix the problem.
I know removing the casing and battery is an adventure, so I am trying to avoid it if I can.
Can anyone think of a way to fix this problem?
Thanks for the help.

Troubleshoot Safari extensions ..
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

My touch pad does not work only when using Safari browser. The screen was grey. Help!

My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
Someone please help.
Thanks

I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies.

DSL Connection Very slow ONLY when using wireless router

My DSL connection was running super slow (approx 136 Kbs) - I disconnected the Linksys wireless router and plugged by DSL modem directly into the computer. Then my internet speed increased to 1.4 Mbs (a 10 fold increase).
Any suggestions on how / why my speed drops so extensively when using the Linksys wireless routher (wrt45g).
Thanks

Are you using the same test each time to measure the speed?
The reason I ask is that Windows usually reports its download speed in KB/sec (Kilobytes per second). But most web (internet) speed tests report their speed in Mbps (Megabits per second.)
A 1.4 Mbps line will typically pass data at about 140KB/sec.
To help determine what kind of problem you are having, do the same speed test in 3 different ways:
1) Connect one computer, by wire, directly to your modem
2) Connect one computer, by wire, directly to your router (all other computers and network devices should be off).
3) Connect one computer, wirelessly, to your router (all other computers and network devices should be off).
Report back your results, and also, please state what line speed you are paying for. Once we have this, we will hopefully be able to help you.

E-mail Reply function no longer works -- only when using Firefox. Gives blank compose screen. Have tried settings changes. Have un and re installed firefox.

Problem does not occur when using a different browser.

Is it Yahoo! mail?? Many users have discovered all kind of problems and glitches with Yahoo! mail in Firefox when using an old bookmark saved before Yahoo!'s recent server changes.
I suggest clearing your Yahoo cookies and entering through the main page to get a better address for your current mail server.
To remove your Yahoo cookies -- save any pending work first -- call up the Cookies dialog while viewing any page on yahoo.com (or your Yahoo site). You can use either:
* right-click the page > View Page Info > Security > "View Cookies"
* Tools menu > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then go to one of these Yahoo addresses and click on login or mail from there:
* Yahoo home page: https://www.yahoo.com/
* My Yahoo page: https://my.yahoo.com/
* General mail redirect: https://mail.yahoo.com/
* AT&T users: http://att.yahoo.com/
* Other country sites (not on .com): the main Yahoo page for your country
Does that help?

Corrupted render .. only when using stills in FCP.. strange ?

Similar Messages

Maybe you are looking for