Corrupted Search For Samples and Hidden Garage Band Samples
in logic if you go to garage band instruments, strings and select basses staccato, it searches for the wrong samples for the instrument. how do i clear what ever searches for exs and garage band samples in logc? also those physical samples used in those garage band instruments are named for example
KBstac_downbow_fA#1.wav if you search your hard drive it will not find those samples. where do they reside? are they hidden and why?
so its a 2 part question. how do i reset searching for samples. i ran onyx on spotlight but i don't think logic uses spotlight to search for samples.
thanks
ok i found out that you have to modify search function to find those garage band samples. the problem i'm having still is there are some garage band instruments that are referencing wrong samples. how do i reset search function
Similar Messages
-
USB/Firewire Interface for MIDI and audio (Garage Band)
I want to connect a Roland Handsonic (electronic drum) and Shure microphone to a Mac Pro for recording in Garage Band. What is the best USB/firewire interface for MIDI and audio?
Mac Pro desktop Mac OS X (10.4.8)If you click one of the links you can read all about it in depth.
three guitarists
That's not what you asked for B-)>
Once you want more than 2 audio inputs, the prices start jumping up dramatically.
would this be the best interface to use?
If you really want "Best" then it's a simple answer:
http://www.bulletsandbones.com/GB/FirePod.html -
How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6? thanks
meredithfromkybybolite wrote:
How can I get instructions for old versions of Garage Band please, eg Garage Band 3
http://manuals.info.apple.com/en/GarageBand_3_getting_Started.pdf
meredithfromkybybolite wrote:
and Garage Band 6?
GB6 is the latest version, so all current docs should directly refer to that. -
Music Player continuously searching for songs and ...
I have a N97 running firmware v.21.0.045 and about a week or so ago I was forced to do the hard reset because the phone became so unstable. I left my E: drive (the mass storage) intact including all of my songs, videos and pictures I had stored.
Everything seems to be okay apart from the Music Player which everytime I use it it starts to search for songs and podcasts continuously. I can stop that and it lists all of my music and can play them but the volume control does not work, either from the telephone or the earpiece supplied.
I have tried leaving it searching for hours but nothing changes - it just keeps on searching. Any suggestions as to how I can fix this please or does it mean I have to do another reset of the telephone? It all worked before.
I have tried taking the battery out but this makes no difference.This is the solution
ok i found the solution here by deleting the corrupted library
http://portablevideo.blogspot.com/2008/12/music-player-database-problems.html
now one of these below is for the music and one for the photos and i didnt have a problem with the photos but did it anyways and now the player can see my music:
these are the files that need deleting in order to get rid of the corrupted library.
Storage Drives: (Mass storage E, Memory Card F)
\private\101ffca9\harvesterdbvx_x.dat
\private\10281e17\[string]mpxvx_x.db
\private\10281e17\[string]pcvx_x.db
TIP: Connect the device in USB mass storage mode (File Transfer), to locate the private folder from the PC.
TIP: STRING and x_x will change depending on your phone. (my files had slightly different names than above on the n97
Kudos to diginoise and Google, I've used it and it works, so have many others, as I've poted this a few times
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?
Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again! -
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/ -
wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.
May need to grab a micro usb cable and restore via iTunes
http://support.apple.com/kb/HT4367 -
Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.
Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem? -
In Shared Movie folder, I get an iDVD folder and a Garage Band folder
When working on an iMovie6 project, I noticed that in the Shared Movie folder within Contents, there is an iDVD folder with a Quicktime and a Garage Band folder with an identical Quicktime movie. Why the heck does iMovie make an Garage Band folder? I hesitate to delete the QT within this folder because I'm not finished yet with the project. Maybe I should delete Garage Band to see if this continues on the next project.
Maybe I should delete Garage Band to see if this continues on the next project.
Rather than delete an application, I suggest that you create a small test project to see if this oddity is repeated. Have you used the "Share" option in the iMovie menu bar? If so, perhaps you accidently selected GarageBand as the destination.
If you are planning on burning a DVD of this project, the veteran posters on this forum would recommend that you do not use iMovie to render the movie. (In other words, do not share to iDVD.) Instead, save your iM project and quit the program. Then open iDVD, and create a new project. Drag the iMovie icon (the one with the star) into the iDVD window, being careful to avoid the drop zones. -
My iphone says searching for network, and I don't have any sim card on it. What can I do?
I just bought a new iphone, It doesn't has any sim card putted on it, but on the left upper corner it says searching for network, and I cannot activate this.. What can I do?
ive got the same prob on my 4s i usually have to hard reboot a couple tims with no sim
steps i go through
1. turn on airplane mode
take out sim
2. hard reboot
3.turn back on then turn off airplane a couple a times if didnt work 1st time
another way that worked for me is turn on airplane mode then reset network settings and reboot with out sim in
but the longest this worked for me was maybe 3 or 4 days it a temp fix.. it just went to searching again about 5 mins ago and i used my first way to fix it, get it to say no sim and then i put sim back in. note it has to say no sim when its on the way to be working -
Bridge - Search for folders and view all contents at once?
Say I do a search for "Landscape" and it brings up 25 folders on my hard drive, is there a way to view the contents of all my folders at once?
Thank you,
BenjaminI have found exactly what I was looking for. And there it is... on AEScripts.com. Color me embarrassed.
For anyone else who's interesed in the answer I found "pt_EffectSearch" by Paul Tuersley.
Marc -
I am trying to pair my phone to my 2011 Toyota kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.
No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!
-
I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking
I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others!
Maybe you are looking for
-
Need a Flash Based Image Editing Plugin
Hello all, I am looking for a product out there I can plug into a website that will allow users to edit photos (crop, resize, tint, redeye etc). Any technology will be acceptable (Flash, Silverlight, AJAX .NET etc). So basically I am looking for a we
-
Authorization for Report Execution
Hello Experts, There is a BEx Report in production, which is visible to me and i can execute. But at the same time, the user is not able to view or execute the report. The report is developed in the production itself and not in development box and
-
Need Help Endeca Dev to QA build process
Hi, Could someone please guide me on how to move or publish a project from DEV to QA environment, along with the merchansising rules and page_builder_templates? Thanks, Shwetha
-
Since updating, Mission Control won't work after sleeping. Upon Start up it's fine, but after sleeping it won't work by trackpad or keyboard. I'm sure I use Mission Control more than most, so it's really irritating for me.
-
Audio playback speed/scrubbing without affecting pitch
I have had this issue forever and have never found a workaround. In Final Cut Pro 7 you can use the JKL keys to toggle play forward, pause, and reverse. If you hit it several times it increases or decreases the speed. What I really enjoyed (probably