Corrupted wiki list with multiple virtual host

Hello,
I have several virtual hosts and I want each of them to only list of wikis which are associated with them using the Wiki Admin Settings -> Advanced : Specific Host Names.
This does not seem to work. As soon as a wiki is associated to a specific virtual host it disappears from the list of wiki (http://hostname/groups/) (on all virtual hosts actually). The wiki itself can still be accessed by its explicit address: http:/hostname/groups/wikiname
If I manually edit the sql3 file directoryIndex.db in /Library/Application Support/Apple/WikiServer
and replace the specific host name by "*", the wiki reappears in the wiki list but on ALL virtual host. Still it remains accessible only in the one designated in the wiki Settings.
Most frustrating. Any workaround ? Seems like a bug but the wiki implementation being so convoluted I am not completely sure.
Any help ?
Thanks
Paul

Hi,
Seems to work on my test ASA
Attached it to my current LAN interface.
ASA(config)# packet-tracer input LAN tcp 10.2.11.1 12345 64.156.192.154 80
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 WAN
Phase: 2
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group outbound_access in interface LAN
access-list outbound_access extended permit object-group obj_Meraki_outbound object-group obj_Meraki_lan object-group obj_Meraki_pub
object-group service obj_Meraki_outbound
service-object tcp destination eq https
service-object tcp destination eq www
service-object tcp destination eq 7734
service-object tcp destination eq 7752
service-object udp destination eq 7351
object-group network obj_Meraki_lan
network-object 10.2.11.0 255.255.255.240
network-object 10.5.11.0 255.255.255.240
object-group network obj_Meraki_pub
description: This group lists all hosts associated with Meraki.
network-object host 64.156.192.154
network-object host 64.62.142.12
network-object host 64.62.142.2
network-object host 74.50.51.16
network-object host 74.50.56.218
Additional Information:
access-list outbound_access line 1 extended permit tcp 10.2.11.0 255.255.255.240 host 64.156.192.154 eq www (hitcnt=1) 0x4d812691
Also have used such configuration in some special cases where the customer has insisted on allow specific TCP/UDP ports between multiple networks. And nothing is stopping from adding ICMP into the "object-group service" also.
- Jouni

Similar Messages

Wiki listed under other virtual hosts

I have a wiki where under "Settings > Advanced" it is set to be restricted to a specific hostname. Using http://www.myhost.com/groups/mywiki I can access the wiki fine, and I see it listed when I go to http://www.myhost.com/groups/. If I try to access the wiki using a different hostname (e.g. http://www.otherhost.com/groups/mywiki ), I get a 404 error (so far so good). However, if, using this other hostname, I ask for a list of available wikis (i.e. http://www.otherhost.com/groups/) the wiki is listed there, even if I get a 404 when I click on it. Shouldn't the wiki be invisible? How do I make it so that the wikis under one virtual host are completely isolated from other virtual hosts?
I have tried deleting and recreating the wiki; turning the Settings > Advanced on and off; etc etc. Same behavior each time.

Ditto.
I noticed it when logged in as a user with permissions to a specific wiki on the server, and went to 'My Page', that updates from all the other wikis on the server are listed, in addition to the updates for the wiki I belong to. I can't get to them by clicking on the links, but they show up in the list. Makes it pretty hard to focus on your wiki, when you see updates from multiple other wikis listed.
It would seem like there must be a fix in the code for both the 'My Page' and the generic top-level '/groups', but I don't know the code structure well enough yet to figure out how/where to fix it.
Anyone else find a solution for this? I don't think I can roll out multiple domains/wikis on one server, if this behavior is present.

OAM Webgate installation on APache with multiple Virtual hosts?

Hi I have customer who is having One Single APache web server and having two different applications configured as different Virutal hosts in the single server.
requirement is , Each application should be protected by OAM Webgate and each application have seperate session configurations. So, How can we handle this ..
I am thinking to install webgate for each application virutal Host to fulfill this requirement but i am worrying about the Webgate installation since both applications on single Apache server and single httpd.conf file.
Really appreciated if anyone suggest me the approach of how to fulfil this requirement.
-Srini
Edited by: user567398 on Jun 17, 2011 3:00 PM

Hi Srini,
You can use a single WebGate - in the "Preferred HTTP Host" setting for the WebGate in the Access System Console, specify SERVER_NAME. OAM will then use the name of the Virtual Host (as returned by Apache) when evaluating policies, and you can have different policies by having different Host Identifiers for the two (or more) virtual hosts.
Regards,
Colin

Oracle Portal Virtual Host Enhacement for Multiple Virtual Hosts

I open the TAR Number: 4326752.996
The TAR is related to " REQUEST ASSISTANCE FOR MULTIPLE VIRTUAL HOSTS AND MULTIPLE PAGE GROUPS CONFIG. "
This is the Scenario: We Have Oracle Portal installed in a single Box. yes I know I know... but Not everybody is Yahoo or Google for Clusters and all the good stuff, we just want our website managed by Oracle Portal since all our ERP is running Oracle Database. Anyway. 1 Box running Oracle Portal Infrastructure and MidTier.
It turns out that our previous configuration we have the LAMP Solution with PHP, Apache with Virtual Servers configuration very trivial for a regular web server however we have about 6 Virtual domains.
For example:
www.abc.com
www.def.com
www.ghi.com
www.jkl.com
www.mno.com
www.pqr.com
We also like to post all our Intranet Information in this great Portal:
http://intranet.com
Where intranet.com is the same server but setup in our Internal DNS without be a Real Internet Register Domain.
So bottom line we start doing great with Install our single box install, later [GRRRRRR does not come by default in port 80 GRRRRRR, ok need to move and setup the virtual host to resolve our main External website www.abc.com ]
For starters ok it worked we have our main website running Oracle Portal.
Now is time to go to the step number 2.
Setup another Page Group in Portal to be the Page_Group_INTERNAL.
I figure if Apache can setup Virtual Hosts pointing to Independent parts of the File System without be shared. I was expecting some kind of custom configuration where I can setup httpd.conf to point to some specific PageGroups to make sure
www.abc.com => Page_Group_External
never share information with:
intranet.com => Page_Gorup_Internal
My TAR was very quick closed with the Argument that is not what It supposed to do.
Since a virtual host is a common thing to do on Linux and Apache, I wonder if You guys could list this as one of the default features to have multiple virtual domains assosiated with Page Groups that they never talk or share Resources I think that would be really great.
In the mean time I guess we have no option but to put a password for every internal page or take the risk of share our Information to the Internet. Perhaps designate another box with Oracle Portal but In that case Is not really cost/bennefit to use a killer technology for our external site since we just have no more than 30 pages.
Anyway just figure drop you guys a note any advise will be really appreciated.
Best Regards Dino.

Hi Martin,
1. To change the target URL of KM resources you can to the following:
Access the URL Generation Service Configuration by navigating to:
System Administration -> System Configuration -> Knowledge Management -> Configuration
Content Management -> Global Services -> URL Generator Service
Change the Host property to "portal.company.com".
2. You change the Port by opening the Visual Administrator and going to : Dispatcher -> Services -> HTTP Provider
Change there the "Ports" entry from (Port:50000,Type:http)to (Port:80,Type:http). Then go on "Save".
3. To remove the "/irj" from the portal URL you can create a index.jsp with the following content, and save it in the J2EE Documentation folder:
<Drive>:\usr\sap\<SAPSID>\JC<J2EE_instance_number>\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
<%
//Send the redirect using server redirection (not client script)
//This will also send the HTTP GET parameters
String queryString = request.getQueryString() ;
if (queryString==null ) {
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default") ;
} else {//redirect with HTTP GET parameters
response.sendRedirect
("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?" + queryString) ;
%>
Hope this helps,
Robert

WAS and multiple virtual Host

I am currently evaluating Oracle WAS on Linux.
It works fine except if I try to have Spyglass serve more than
one virtual host. When I do this it stops with an Internal error
after serving a few files.
Q. Does anyone have Spyglass serving for more than one virtual
host on the same port.
Q. What could be the problem
I use RH 5.1
Johnny Verhoeven
null

Web is stupidly easy - Apache has extensive support for multiple virtual hosts in a single server and will happily support as many domains/hostnames as you can throw at it.
Mail is a little trickier since it needs to hook into some kind of directory server to validate user addresses.
Mac OS X's Open Directory does support this, but it's a little cumbersome (basically every user has to exist in the main Open Directory domain as well as having a secondary email address(es) in the other domain(s).
This can get especially tricky when you have users with the same shortname in different domains - for example if you give [email protected] a secondary email address of [email protected] and you then get a new user [email protected], you can't give the third 'joe' the address 'joe' in Open Directory since that's already taken. This means he'll have to login using different credentials from his email address. Confused yet? You bet.
If you're prepared to eschew Open Directory you can just use Postfix's built-in support for virtual hosting, but it's a little more complex to setup and support and is entirely command-line based (i.e. there's no GUI for setting it up or supporting it).
So, for that reason you might be prepared to setup multiple virtual machines for each domain. It really depends on how much the domains are related (if at all).

Multiple virtual host impacting performance

Is there a performance issue with relation to the number of virtual hosts
which one server is hosting? If there is, how many can an average server
handle before one would see a performance hit?
Thank you.

Web is stupidly easy - Apache has extensive support for multiple virtual hosts in a single server and will happily support as many domains/hostnames as you can throw at it.
Mail is a little trickier since it needs to hook into some kind of directory server to validate user addresses.
Mac OS X's Open Directory does support this, but it's a little cumbersome (basically every user has to exist in the main Open Directory domain as well as having a secondary email address(es) in the other domain(s).
This can get especially tricky when you have users with the same shortname in different domains - for example if you give [email protected] a secondary email address of [email protected] and you then get a new user [email protected], you can't give the third 'joe' the address 'joe' in Open Directory since that's already taken. This means he'll have to login using different credentials from his email address. Confused yet? You bet.
If you're prepared to eschew Open Directory you can just use Postfix's built-in support for virtual hosting, but it's a little more complex to setup and support and is entirely command-line based (i.e. there's no GUI for setting it up or supporting it).
So, for that reason you might be prepared to setup multiple virtual machines for each domain. It really depends on how much the domains are related (if at all).

How to select value from list with multiple selections ?

HI,
i have a list with multiple selections where i show email address retrieved from database.
what i want to do is to send the selected email address to the invoiceedit.jsp.
please look at the following code which gives you the better idea.
<td class='smalltext'><select name="email" size="3" multiple="multiple">
   <%
   Connection conn = null;
   Statement stmt = null;
   Statement stmt_contactperson = null;
   Statement stmt_address = null;
   try{
      conn = getREConnection();
       stmt = conn.createStatement();
   ResultSet rs = null;
   rs = stmt.executeQuery("SELECT PROPERTYID, VALUE FROM PROPERTIES WHERE ENTITYID="+ g_strGroupID+" AND NAME = 'invoice_default_email'");
   int numofrows = 0;
   while(rs.next())
           %>
   <option value="<%= rs.getString("VALUE") %>" selected="selected"> <%= rs.getString("VALUE") %> </option>
    <%
       }//end of while
      %>
     </select>
    <a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&add=1"><font color="#000000">Add</font></a>
     <a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&email_to="><font color="#000000"> Edit</font></a> </td>thanks

Use a form button instead of a link so that you can send it as a request parameter to the server. In the server side just use HttpServletRequest#getParameterValues() to obtain all values for the given parameter name. If you really need a link rather than a button, then use Javascript to submit the form on click of the link.
That said, your design is bad. Java code belongs in Java classes, not in JSP files. Database access logic belongs in a DAO class. Business and controlling logic belongs in a Servlet class. Only presentation logic belongs in the JSP file. Avoid scriptlets as much as possible and use JSP EL and/or JSTL instead.

[svn:fx-trunk] 10943: Fix to dragging from List with multiple-selection

Revision: 10943
Author:   [email protected]
Date:     2009-10-08 15:46:27 -0700 (Thu, 08 Oct 2009)
Log Message:
Fix to dragging from List with multiple-selection
- The fix is to postpone the selection commit until we make sure the user has not started a drag gesture.
- Exclude the dragEnabled, dropEnabled, dragMoveEnabled properties for DropDownList
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Deepa
Tests run: checkintests, mustella List, DropDownList
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as

Creating Select List with multiple columns

I want to create a select list with multiple columns. I followed the demo application model described in the by Denes Kubicek (Currently my reference for APEX !!)
The code is as follows:
CREATE OR REPLACE FUNCTION getcrops(p_cropid IN NUMBER)
RETURN VARCHAR2
IS
v_cropid VARCHAR2 (400);
v_fcode VARCHAR2 (400);
v_product VARCHAR2 (400);
v_var VARCHAR2 (400);
v_fname VARCHAR2 (400);
v_acres VARCHAR2 (400);
v_style_start VARCHAR2 (400);
v_style_end VARCHAR2 (400);
v_return VARCHAR2 (400);
BEGIN
FOR c IN (select "CROP"."CROPID" as "CROP ID",
     "CROP"."FIELDCODE" as "FIELD CODE",
     "CARROTPRODUCTLIST"."CARROTPRODUCTNAME" as "PRODUCT",
     "VARIETYLIST"."VARIETYNAME" as "VARIETY",
     "FIELD"."FIELDNAME" as "FIELD NAME",
     "CROP"."SIZEINACRES" as "ACRES"
from     "FIELD" "FIELD",
     "CARROTPRODUCTLIST" "CARROTPRODUCTLIST",
     "VARIETYLIST" "VARIETYLIST",
     "CROP" "CROP"
where "CROP"."CARROTPRODUCTTYPE"="CARROTPRODUCTLIST"."CARROTPRODUCTID"
and     "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and     "CROP"."FIELDID"="FIELD"."FIELDID")
LOOP
v_cropid := TO_CHAR (c.'CROP ID', 'FML999G999G999G999G990');
v_fcode := c.'FIELD CODE';
v_product := c.'PRODUCT';
v_var := c.'VARIETY';
v_fname :=c.'FIELD NAME';
v_acres :=c.'ACRES';
FOR i IN 1 .. 12 - LENGTH (c."CROP ID")
LOOP
v_cropid := v_cropid || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD CODE')
LOOP
v_fcode := v_fcode || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'PRODUCT')
LOOP
v_product := v_product || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'VARIETY')
LOOP
v_var := v_var || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD NAME')
LOOP
v_fname := v_fname || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'ACRES')
LOOP
v_acres := v_acres || ' ';
END LOOP;
v_return := v_cropid || v_fcode || v_product || v_var || v_fname || v_acres;
END LOOP;
RETURN v_return;
END;
I created this anonymous Pl/SQL function at a application level ..Then I followed up to create a select list with a function inside. However I could not create select list with the command suggested in the demo which is
select getcrops(cropid) d, cropid r from crop;
APEX (2.1) returns a error message. What am I missing ? Should the function be called from somewhere else after creating a regular select list..? Where the functions (Pl/SQL) should be ideally stored for application level access..? and for across application level access ? How can I check the function works good. Help is appreciated.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Selection list with multiple columns

How can i create a selection list with multiple columns?

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Select list with multiple columns

I want to create a select list with multiple column option. What are the options. Any developments in apex 3.0.1 ? Thanks in advance. I tried the tutorials by Kubicek.
I am kind of stuck to see the function entry inside LOV definition returns a error.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

List with multiple objects

Hi,
Is it possible can we have a List with multiple Object (CustomerVO, OrderVO and AddressVO) in a single List? If so how we will define the generics for that List?
Please clarify.
Thanks.

797836 wrote:
Guys, am I correct? Please clarify.If it works, it is correct. So try it.
I was more thinking along the line of this though according to what you described in your initial post:
Class ParentVO{
private CustomerVO customer;
private OrderVO order;
private AddressVO address;
// with getters and setters
}That way you don't need any list at all, if you only want to have access to these three objects. Just slap them in a ParentVO and use that.
Looking at it again I wonder if the ParentVO is needed even, there is a strong relationship between these three objects. An order has a customer and a customer has an address / an order has a billing/shipping address...

List with multiple selection

Hello;
I seek a code to implement a list with multiple selection for a browser Web (HTML is imited).
I have a list containing of the years, the user can select one or several years and I created dynamically a array : for each year a column.
Thank you;

Look at JList.
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JList.html
� {�

List with multiple column

hello all ,
how to create a list with multiple columns ? can anyone share some examples or code snippets

What I would usually do is create a movieclip/sprite that contains a row with every column in it (each column being a textfield). Then pile up the rows one atop the other (using Actionscript) as they are populated with data.

Separate Wiki Data Stores for Virtual Hosts?

Is it possible to set different data stores to be used for the wikis associated with different sites (i.e. virtual hosts) on a Mac OS X Server (Snow Leopard)?
By default they are in "/Library/Collaboration/" and that is applied to ALL hosted sites.
My client would like a little more differentiation than that offered by user and/or group login.
Thanks in advance.
+*Geoff Heys*+

Ditto.
I noticed it when logged in as a user with permissions to a specific wiki on the server, and went to 'My Page', that updates from all the other wikis on the server are listed, in addition to the updates for the wiki I belong to. I can't get to them by clicking on the links, but they show up in the list. Makes it pretty hard to focus on your wiki, when you see updates from multiple other wikis listed.
It would seem like there must be a fix in the code for both the 'My Page' and the generic top-level '/groups', but I don't know the code structure well enough yet to figure out how/where to fix it.
Anyone else find a solution for this? I don't think I can roll out multiple domains/wikis on one server, if this behavior is present.

Corrupted wiki list with multiple virtual host

Similar Messages

Maybe you are looking for