Corruption in LR Develop mode

Greetings,
I'm on a Mac Power PC running OS 10.5.5 with 6.5 GB RAM on LR 2.1. I am shooting with a Canon 1ds III on SanDisk Extreme IV 4.0 GB cards.
Sometimes I get a rainbow-colored corruption on part or most of an image while working with an image in the develop mode. I recently upgraded to LR 2.0 and was hoping that it would clear up what was happing in LR 1.0 but it has not.
The only good news is that when I restart the computer and then relaunch LR, the corruption disappears before my eyes. In other words, when the image is "loading" in LR's develop mode, the same corruption is there momentarily but then vanishes once the image has fully "loaded."
Any thoughts?
Let me know if I can provide more information as I'm sure I have not provided enough. I have a screen capture I can email (or post if I knew how).
Thanks,
Scott

Hey Martin,
I can't get your first link to work but what I get is a square or rectangular-rainbow-digital gobbeldigook usually starting from the lower right corner of the image covering anywhere from 5% to 90% of the image.
At the moment, I'm exploring the possibility that mine is RAM-related. I'm able to recover the flawed images after a restart. This points me to a problem with my Mac or the LR software. I could be wrong so take this with a grain of salt.
Anyway, I purchased online (for a buck and change) "Memtest OS X". It checks your RAM for errors/flaws. After running the program, it turns out I have a bad RAM chip in my desktop machine and so I have of course removed it. So far, with working all day today on post, I have had no problems (knock wood). This is by no means final in my mind however and I'm going to continue to cross my fingers and hold my breath for a little while every time I open an image in the develop mode of LR.
I hope this might lead you somewhere as well. I'll report back later after I've had some time to test the waters.
Any luck on your end?
Scott

Similar Messages

  • Starting Weblogic Server in Development Mode

    Hello,
    How can I start a managed server in development mode? I set STARTMODE=false in
    the StartManagedServer.cmd. However, this did not work. Any ideas? Thanks in
    advance.

    收到，谢谢！
    内容不错

  • JDeveloper IDE: Developer Mode Error

    Hi All,
    I am facing an issue after launcing JDEV through /jdevbin/NT/1223_db2dbg_17007206 (JDeveloper IDE for Release 12.2.3 Dev Build 2).
    I am getting developer mode error after launcing my application. For the error to perish, we need to disable the same by :
    Go Project Properties -> Oracle Applications -> Run Options and remove OADeveloperMode from the selected list.
    However the OADeveloperMode option is not visible at project properties. Any idea on how to disable the option through any other means or any workarounds.
    The profile “FND:Developer Mode” is already set to No in site level in environment. I am still seeing the Developer Mode error in jdev.
    Thanks in advance.
    Regards,
    Arpita

    Hi Shobit,
    Error message :
    (This developer mode error is thrown instead of being registered due to the lack of the page context object.) The OA passivation framework coding standard has been violated. Web bean properties cannot be modified in the controller processFormData or processFormRequest method. Web bean properties should be modified in the processRequest method only. An attempt to modify a web bean has been made in the following call stack: java.lang.Throwable at oracle.apps.fnd.framework.OACommonUtils.getCallStack(OACommonUtils.java:822) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.setAttributeValue(OAWebBeanHelper.java:1857) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.setAttributeValue(OAWebBeanHelper.java:1891) at oracle.apps.fnd.framework.webui.OAWebBeanFormElementHelper.setAttributeValue(OAWebBeanFormElementHelper.java:2108) at oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean.setAttributeValue(OAMessageLovInputBean.java:616) at oracle.cabo.ui.beans.form.TextInputBean.setRequired(TextInputBean.java:441) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:743) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursive(ClientUtil.java:704) at oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO.setPageReadOnly(ClaimUpdateCO.java:425) at oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO.processFormRequest(ClaimUpdateCO.java:239) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:854) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1241) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1066) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1032) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:887) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1066) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1032) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:887) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:3113) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1897) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:558) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:446) at _OA._jspService(_OA.java:72) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:127) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:116) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:662)
    This error part of the file (oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO) present in the error message is an already existing code.
    Now the problem with solving this issues may end up solving many other issues. I am also not sure that my solving one part will fix it or not.
    If you can please help me with suppressing the option how we used to do that earlier via jdev, then I can move ahead with my changes and test them.
    Thanks,
    Arpita

  • Issue in Develop mode for embedding google map

    Hello,
    I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
    The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
    Many thanks .

    Hi Muzeone,
    Its a default behavior with every WYSIWYG HTML Designer or editor,
    Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
    If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
    Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
    The design view will only show you iframe height which is defined in the codes below that it will show a black box.
    Enjoy working with MUSE !!
    Thanks
    Prabhakar Kumar

  • Lightroom 4 Bug: can only see photos in Library mode, not develop mode

    This may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
    1. Select a photo in Library mode.
    2. Click on Develop to go to Develop mode
    Screen shows "No photo selected". I cannot edit photos in Develop mode.
    I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders

    This happened to me, too, after importing a couple older LR3 catalogs (upgrading/consolidating). I could see the photo in Library module but when I pressed "D" (single photo selected) I was getting the "no photo selected" error message--for every photo I tried. I wasn't able to open any photos at all in the develop module. (These were photos that were fine before installing LR4 and upgrading.) Photos were from imported LR3 and LR4 Beta catalogs.
    I restarted and everything seems ok--for now!
    So if you come across this thread with this same issue, restart and see if that helps. (Before restarting LR I optimized as suggested above, which did nothing for the "no photo selected" issue. And this isn't related to the parent folder issue, I left my photos in the same place and didn't have more than 3k photos in any of the parent folders. I read in other threads that people had the issue again after importing other catalogs. I'm about to do that so I'll report back.

  • Image in Develop mode - Orange Tint

    I'm having an issue with my images when I switch to Develop mode.  There is an orange tint that appears in each image while I'm tweaking it.  Sometimes the tint is minor like the example I've attached and other times it makes it very difficult to edit the image.  When I return to Library mode or export the image it's normal. 
    I've attached the same image in both Library and Develop mode to illustrate the issue.  I've highlighted the problem areas with Yellow call-outs in the image that's open in Develop mode (note no adjustments have been made the tint appears as soon as I switch to Develop).
    My system uses two video drivers (they are current as of today):
    Intel HD Graphics 4000, Driver version 10.18.10.3621
    NVIDIA NVS 5200M, Driver version 340.84
    Thanks in advance for any assistance.
    Jack

    DOH, so much to learn!
    Thanks

  • I lost my Basic module in Develop mode...HELP!

    While letting someone borrow my lightroom, I lost my Basic module in the Develop mode.  I am LOST without it.  How can I get it back?  Reinstall?  Time Machine from past?  Will I lose pics if I do that?

    Right click any panel header onthe right hand side of the interface, and place a check mark next to "Basic."
    Or, press Ctrl-1 (Windows) or Cmd-1 (Mac).
    There's also a menu command to view the panel, but I can't remember it and I don't have LR in front of me right now.
    mh++

  • Why are my processed images now sharper in the Library mode than in Develop mode (LR5)?

    In LR 5. Recently I noticed my processed images are sharper in the Library mode than in the Develop mode. This makes doing adjustments difficult because I can't really tell the effect of the adjustments.
    PC, i7, 24GB RAM.
    I've tried purging the Camera Raw cache. It's been suggested to purge the Preview cache but I cannot find the Preview cache file. It's also been suggested to clear the Preferences but those file don't show up in a search either even though my PC search is set up to show hidden files and folders.
    Any solutions?

    Images can be different between the camera-rendered preview you see before Import and the default Adobe rendering, but after import the thumbnail in the LR grid view shouldn’t be a different tone than the image in the main area.  Is that what you’re saying you’re seeing?
    Can you show us a screenshot with both the thumbnail filmstrip and the central area visible as well as the histogram?

  • Second screen Full screen preview - library and develop mode next to eachother?

    Hello,
    I got a two Display Setup.
    I like to have the current selected Image in "Develop Mode" Fullscreen on the big display and all the sliders on the smaller second Screen togeather with the overview of the Library.
    How is that possible?
    Cheers
    mARTin

    I've seen that in the past with other versions of LR. It usually means that your previews database has got messed up. Deleting all previews, previews.db and root-pixels.db, and clearing the acr cache, and then creating new previews solved it for me. It took a day or two (65K previews)
    Bob Frost

  • Allow editing metadata in develop mode

    My biggest dissatisfaction about Lightroom right now is the distinction between Library and Develop modes or views. I would dearly love to get rid of the "quick develop" panel - perhaps make that something that could be displayed via the application prefs - and put the keywords and metadata panels into the develop module. I find myself frequently wanting to switch from one module to another - to add a keyword while I'm adjusting the exposure, or to jump over to the editable histogram while I'm sorting out the keepers from the losers. I don't currently use the Web or Print modules at all, so I just ignore them.
    Will

    Quick Develop serves 2 purposes - adjustment of lots of images in increments, and adjustment so you can compare and evaluate images (eg when you've been bracketting). It also uses cached data, while Develop accesses the original image data - so things happen quicker.
    I didn't like QD at first either, but I'd recommend you give it more of a chance and don't delete it (you can Alt/Opt click it). Secondly, Ctrl/Cmd click the Sync button in Develop so you enter Auto Sync mode - this makes Develop adjustments apply to all selected items and great reduces the back and forth between Library and Develop.
    John

  • [SOLVED] corrupted display after graphical mode

    Hello,
    I am new to ArchLinux.
    After Installing the system, I followed the instructions on wiki.archlinux.org and managed to launch the graphical mode (xterm and even KDE).
    However, it seems that after exiting the graphical mode, my screen is corrupted (I suspect that text console becomes corrupted during launching graphical mode but it is not visible until returning to text mode).
    The Linux itself works properly (f.ex. alt+ctrl+del works ok).
    I added only exec xterm to the ~/.xinitrc file and I am using MSI netbook with intel graphics card.
    I attached two pictures describing the problem:
    http://kdiablo.hostit.pl/img/DSC_0045.jpg
    http://kdiablo.hostit.pl/img/DSC_0048.jpg
    And logs from xorg:
    http://kdiablo.hostit.pl/img/Xorg.0.log
    I would be very helpful for any help!
    Cheers,
    KK
    Last edited by kdiablo (2014-11-06 21:29:34)

    I checked my graphics card as you advised.
    # lspci | grep -i vga
    00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 0b)
    I also found in the netbook's specification that:
    CPU: Intel Atom Processor N2800/N2600 Series
    Graphics: Intel GMA 3650
    I could assume that indeed, https://wiki.archlinux.org/index.php/Intel_GMA3600 would be the proper driver for me.
    However, based on information from the website, the kernel version - 3.17.2, and the xorg version - 1.16, I am quite worried if I can try to install these drivers.
    Are there any newer versions/similar drivers available?
    KK

  • AT10-a-104 : Developer mode

    I just called the US support team to get information form them about my brand new AT10-a-104 tablet. I spoke to 5 different people and all of them told me that Android is not a Linux Operating System. It appears that there is a serious training issue with the US support team. I suspect it is across all of the Toshiba support teams too.
    My reason for calling the US support team is because I tried to find information about enabling Developer Mode on the device. Specifically I wanted to connect via adb to the device from my Linux and Mac computers. Funnily enough my Linux computer is actually a Toshiba Tecra M5 and I also happen to use it for some pretty advanced Android software and Firmware development. It seemed strange to me that there was not a developer mode for the device as I have come to expect a high standard from my experience with the Toshiba Tecra M5. Still going strong after several years of constant use.
    Anyway while I was waiting for the US support team to answer the phone while also patiently waiting to be connected with someone in their team who knew anything at all about software deveopment or pretty much any general information about Linux I actually found the answer over on the Thrive forums website. 
    Tap Settings->About tablet->Build Number 7 times to unlock Developer mode in the Settings menu. This is a neat trick but it really should be made more obvious for serious professional developers who are interested in programming for the range of Toshiba Android Tablets. Why not put up a webpage specifically with that information. At least you could add it to the Windows driver download page. for those of us who do not use Microsoft products.
    http://support.toshiba.com/sscontent?docId=4001814
    The company I work for is in the position to purchase 20 - 50k of these devices and if I wasn't able to get developer mode working it would have been a show stopper. We are still unsure because of the lack of other developer tools. Even Archos and Allwinnner provide a more complete Development toolset. At the very least it would be good to have an official Android Developer Firmware edition with the disclaimer that warranty would be void after installation.
    Check out the Archos Tools if you want a good example of a fairly reasonable middle ground to keep the legal types from fraking out while also making your hardware accessible to industrial scale customers.
    Even better is to offer a link for purchasing the full Android SDK for a reasonable price. Usually between $2k - $5k depending on the sales person. That would be a real deal sweatener for us and I'm sure other companies would be interested in that option too.
    BTW, you really should pay someone to respond more regularly on thie forums. It ssems like no one from Toshiba is monitoring the Tablet forums at all. That is not a good look when combined with the lack of training on display with your US support team. Definitely not leading innovation when it comes to support and documentation of the Android devices.

    Unfortunately...another Android firmware version cannot be installed at your own hand.
    The update can be done only via Toshiba Service Station. Of course if available.

  • I am unable to open images in Develop Mode in Lightroom 5.4. I keep getting system crashes. Now they wont even open images up at all in any mode.

    I have Lightroom 5.4 under the CC from Adobe. EVerytime i opened an image up in Develop mode, the program would crash and Microsoft would tell me its stopped working. After playing around with it, now it wont even open up images in ANY of the modes, WHAT IS GOING ON WITH LIGHTROOM ?!?

    First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
    All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
    Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
    This will make sure you don't accidently delete important app files.
    All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
    Hopefully this helps...

  • How can I REPLACE original RAW files with JPG's and keep my 'Develop mode' edits?

    An image describing my problem:
    http://i.imgur.com/hcqMYkv.jpg
    (Lightroom 5)
    'edits' = Edits made in develop mode.
    'CR2' = My RAW image file format.
    I have existing CR2's with edits for them saved in Lightroom.
    I want to replace the CR2's with JPG's, and do nothing else. I want those JPG's to inherit the CR2's edits, but I DO NOT want the edits to be permanently applied to the image.
    If I export the CR2's (which have edits) to JPG's, the edits will be permanently applied to them. I do not want this.
    If I export the CR2's to JPG's without the edits, I have no way of getting the edits back and will have to redo the work if I use that photo again.
    Any solutions? I've been trying for a while and have no idea how to do this.
    Q: Why not keep the CR2's?
    A: I am uploading these files to an online host (S3) as my primary storage method and uploading CR2's takes way too long with my internet speeds. Furthermore, online storage costs money.
    Q: Why not shoot with JPGs instead of shooting raw?
    A: I do my initial edits with the raw files and then archive them as JPG's to save storage space. They won't be raw anymore if I apply future edits, but I still have the option of retouching them from the 'original' state and still have my old edits preserved.

    Probably the best thing for you to do is simply use lossy DNG format (e.g. export as, or convert to..): raw data is re-formatted with jpeg compression (full-rez or reduced-rez), but all raw settings apply.
    If you insist on trying to have a true jpeg file with (mostly) raw settings, then:
    The simplest way I can think of to do it without a script or plugin:
    * Reset the raw photo (consider preserving things that don't translate well, like profile-based lens corrections and white balance).
    * Export jpeg
    * Un-reset the image (e.g. using edit history or pre-reset snapshot).
    * Sync settings from raw to jpeg (note: omit settings that don't transfer well, or that were not reset..).
    * Optionally: Delete raw
    To automate/streamline would require a script or plugin.

  • Trying to deploy C++ UAP from VS2015 prompts to set developer mode

    Error : DEP0100 : Deployment failed due to a Developer Licensing issue. Could not obtain a developer license due to error 800704C7.
    It is not clear how to put the device into developer mode to allow deployment.

    Here is a workaround that is now in place for the “developer mode” issue. It is a known issue and it’s being worked on.
    Issue
    ​Bug ID
    ​Workaround   (if applicable)
    Creating a UAP   prompts you to developer unlock your computer by going to Settings -> For   Developer -> Developer Mode, but clicking on that setting crashes
    settings
    OS: 2320802
    1.   Run Gpedit.msc
      2. Under: Local Computer Policy > Computer Configuration >   Administrative Templates > Windows Components > App Package Deployment
    Allow all trusted apps to install (will enable         sideloading of trust signed apps such as for enterprise apps)   
    Allow development of Windows Store apps without         installing a developer license (will enable developer F5 mode installs        
    like the dev license would on win8.1)  
    Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

Maybe you are looking for