CORS issue in ECC 6.0

All,
We are having a problem with transaction CORS in our ECC 6.0 environment.  This is not occurring our 4.6C environment.  Records are posting to CO1P when they are not successful in CORS.  According to note 208477:
"In the case of a lock situation, an error record which can be reprocessed with Transaction COGI is not created. However, a request record is created instead. Such request records can be displayed with Transaction CO1P. It is also possible to selectively update individual markings from the list of markings.  It is recommended to regularly plan in a job which updates these records. The following reports are available for this:
o CORUPROC: from Rel. 4.0A (AFFW and AFRPx markings)
o CORUAFWP: from Rel. 3.1H (AFFW markings)
o CORUAFW0: only Rel. 3.0/3.1 (AFFW markings)
Report CORUPROC should be used for this from Release 4.0." 
However, running job CORUPROC to process the records in CO1P is not acceptable from a business perspective.  Is there a difference in C01P in 4.6C and ECC 6.0?
Thanks in advance for your help with this.
Kalyan Veerapaneni

Hi,
There will be new authorization objects getting added to the transaction code after the upgrade.
Adjust this transaction code with new authorization objects.
You can follow these steps to adjust.
1.Go to transaction SU25
2.Run steps 2A to 2D
3. Each steps has its own significance.Read the instructions carefully when you click on each tab from 2A to 2D.
4. You need to adjust the roles, new t-codes with old ones and new authorization objects with old ones.
Hope this helps.
Regards,
Imran

Similar Messages

  • Imported Photos Go All White! A Bug Or Is It Quartz/Core Issue?

    Imported Photos Go All White! A Bug Or Is It Quartz/Core Issue? Tried jpg and png and .........

    I had that same problem with my laptop. Went to apple and they could not fix it. Had another issue and they told me to copy my iphoto library to the desktop. When I did that the white pictures were then visible on the desktop library. They said I had too much stuff on my computer. When I upgraded to I life 06 most of the pictures came back.

  • Trading Partner issue in ECC

    I have just activated the trading partner in ECC vendor/customer master on 1.09.08, thus all posting before this date was posted without trading partner information.
    In BCS, I plan to load balance as at 31.8.08 using flexible upload as opening balance with all the "correct" trading partner information breakdown and subsequently, period movement will be extracted from ECC.
    However, I notice that in ECC, when we make payment to open item created before 1.9.08 (document without trading partner), system will not populate the trading partner information, instead the trading partner information in original line  (i.e. blank) will be posted.
    I think this will create a problem, as I alrady uploaded the inter company balance with correct breakdown, but now period movement will be posted without trading partner, thus my balance in BCS will not be correct.
    Anyone face the same issue before? Appreciate you can share with me how to overcome this issue, thanks.
    Regards.

    This is not an uncommon problem. A few ways to address this are: correction posting in ECC, or correction posting in BCS.
    In ECC a posting to move amounts from blank/null trading partner to actual trading partner is one solution. However this is not always possible when the accounts are reconciliation accounts.
    In the case of reconciliation accounts it may be better to post the correction in BCS at posting level 10.
    Another way to address this is to change the breakdown for these accounts to require trading partner and if blank default is used. Then the correcting entries are from default trading partner to the true trading partner in BCS.

  • FM GUI_UPLOAD issue in ECC 6.0

    I am facing issue with using GUI_UPLOAD in new ECC 6.0 environment. The FM works fine in 4.7.
    Issue:
    Teh file is built in excel and saved as tab delimited, but one of the data cells has newline character and hereby when I upload the file, the system put the  record after new line character as a seperate record.
    Input file records:
    col1     col2     col3
    "dat11dat12"     dat2     dat3
    Output:
    col1#col2#col3
    "dat11
    dat12"#dat2#dat3
    There is a newline character in the first column betweeb dat11 and dat12.
    How do I resolve this issue without code change because newline character is part of data.
    The FM GUI_UPLOAD works fine in 4.7 system. Looks like this FM has undergone changes between two environments.
    Thanks
    AKJ
    Edited by: Amit Jain on Jun 16, 2010 1:28 PM

    Check
    Note 1464980 - GUI_UPLOAD: Line break LF was accepted
    Markus

  • Font issue in ECC 6.0 upgrade

    can any one please tell me
    regarding the font issues in SAP SCRIPT some of them fonts are not upgrading in ECC 6.0 VERSION as in 4 and 5 version.
    please suggest me to solve this problem.
    please help me its urgent.

    in this case u have to check the syntax of ur driver program, 2. have to check the NACE settings for output type and Medium also.
    Regards
    Peram

  • Issue in ECC 6.0 Regarding Purchase Order

    Hi all,
    i have an issue with print preview in ECC 6.0.
    i CAN SEE PRINT PREVIEW IF I HAVE MEDIUM AS PRINT OUTPUT ,
    IF I DON'T HAVE HAVE MEDIUM AS PRINT OUTPUT , I AM GETTING AN ERROR SAYING Error in OPEN_FORM for document
    I guess it should be independant of medium right
    in my older version it works fine i.e can see print preview even though i don't have print out put ads medium
    Did anyone of have faced similar problems
    Thanks in advance

    in this case u have to check the syntax of ur driver program, 2. have to check the NACE settings for output type and Medium also.
    Regards
    Peram

  • Turkish Special characters issue in ECC 6.0, while uploading into table

    HI All,
    We are working with Turkish special characters in ECC 6.0
    We are uploading a CSV file containing characters like : İ, Ğ, Ş, Ü, Ö, as soon as the file gets uploaded to application server,
    it gets converted to ? or # or Ý.
    Also, we are reading the file using OPEN DATASET, ENCODING NON-UNICODE, IGNORING CONVERSION ERRORS, the same characters gets uploaded into the custom table  i.e. Ý.
    I have also tried saving the file in UNICODE / UTF-8 format, but the issue still remains.
    I tried searching SAP Notes as well.
    Any pointers to resolve the same will be helpful.
    Regards,
    Siddhesh Sanghvi

    Dear Siddhesh,
    Perhaps OSS note 508854 could help here.
    Also please be aware that Turkish only runs on ISO codepage 8859-9 (aka Latin-5 / SAP codepage 1610).
    I hope this helps.
    Best regards,
    Ian Kehoe

  • Billing in CRM before goods issue in ECC

    Does anyone know if it is possible to create a billing document in CRM before the goods issue has been posted for the delivefry created in ECC? In some cases we need toi have a Pro Forma, before goods issue has been posted.
    Best regards,
    Pascal.

    Couple of things to Clarify here.. There is no such thing as Financial postings in CRM. If you are referring to Billing..CRM can support creation of Debit Memos only and nothing beyond that. So DMs will become your billing document and any other subsequent Accounting entries are dependent on external system like ECC.
    As the other person said, you need to configure the whole 9 yard on Billing in CRM using CRM BEA
    Thanks
    Raj

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • Last hope on performance issues in ECC 6

    This forum is my last hope for help on this issue.
    We just recently went from 4.6c, oracle 9-something to ecc 6, oracle 10g.
    We have found that report performance in the background has been TERRIBLE in comparison to the old version. Especially CO reports and PS reports. We have spent countless hours on analyss and program changes, and OSS note applications, and have exhausted evey means to find the underlying issue that the upgrade seems to have caused.
    The biggest issue we found were changes to the PSJ logical database, and we fixed that.
    We have looked both on the Oracle side and the SAP side.
    Still reports are running 3-4 times longer.
    We are non-unicode
    Has anyone else run into this issue?

    I´d do an SQL trace (ST05), switch it on for a user, start the report and let it run until it bombs out with timeout. Then switch off the trace and evaluate it.
    Also check note 871096 and install the patches listed for your platform.
    Did you create database statistics after you did your upgrade?
    In any case, create an SQL trace and open an OSS call on BC-DB-ORA telling the support your problems and let them have a look at the execution plan of your statement.
    Markus

  • ABAP Webdynpro Rendering issues after ECC Upgrade

    Dear All,
    We recently upgraded ECC to EHP 7 (Netweaver 7.4)  but our Portal is still at Netweaver 7.0 EHP2 SP16.
    The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
    1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.  
    2. The cursor in the  Input fields reset back to the first position while typing and create a big mess.
    Any help appreciated.
    Thank you.
    PK

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • IDoc segment version issue in ECC upgrade from 5.0 to 6.0

    Hi experts,
    we are in the process of upgrading our ECC environment from 5.0 to 6.0. We have quite a few interfaces which use ORDERS/Invoice Idocs in customised form. In ECC5.0 environment, we had developed a Z segment in the ORDERS Idoc and the segment release was set as 640. Everything worked fine in ECC5.0.
    In upgraded environment, SAP has released new version of some segments. one of those is E1EDP01. This segment has 2 new versions in ECC6.0 environment - 007 and 008. This change in the version changes the data in the IDoc and hence interface goes in error at the EDI provider.
    We have tried to use 640 as the IDoc segment release in the partner profile of the IDocs. This still gives us an issue because the 007 version of the segment E1EDP01 has release 620 and hence the Idoc picks up 007 version instead of 006 version as desired. When we change the partner profile with Segment release in the IDoc type as 46C, it gives us an issue in the Z segment saying that the IDoc segment is not released in 46C and the Idoc goes in error.
    has any one faces such situation in the past? if yes, please throw some light.
    Thanks in advance.

    Please let me know if your issue was resolved. I have similar issue now.
    Thanks,
    Sailaja

  • BD64 issue having ECC + BI on the same client

    Hi there,
    We do have a small instance having ECC and BI in the same System.
    The ABAP RFC connection is fine and when Replicated in RSA1 Datasources from SourceSystem R3 went fine.
    But I think we have an issue with the Idoc settings.
    Went through the doc [http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true] and found that when BD64 it asks me the Sender / Receiver to be different.
    Though as mentioned in our case it is the same.
    It is really needed to update these settings in BD64 when both systems are in the same System?
    Thank you,
    A.

    Hi Asik,
    Thank you for the reply.
    Yes, that is right.
    We access BW and R3 through the same logon.
    I found the issue though !!
    Would explain it in case someone faces a similar issue.
    1- The ABAP RFC connection was fine.
        Tested and transfered the DataSources fine.
    2 - though there was still an issue with table RSBASIDOC not showing Transfer Structure field.
    Solution:
    Read
         u2022     http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true
         u2022     Setting up Connection between BW and R3 for Data.pdf
         u2022     Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW.pdf
    Followed the post:
    Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW
    1. Go to WE20 and check whether Partner profile T90CLNT090 exist in LS type,if not just add Parnter profile with same and save.
    Partner profile Name: T90CLNT090
    TYPE: LS
    Give:
    Ty: US
    User: User Name
    Lang: EN
    and Save.
    2. Again re-click on Partner Profile: T90CLNT090
    you will see ,there will be some entries in Inbound & out Bound Tabs.
    Delete the following from outbound:
    1.RSRQST
    Delete the following from inbound.
    1.RSINFO
    2.RSSEND
    and save your partner profile.
    3. now execute - RSA1, it will ask to active Workbench. Just activate it . it will work now.... Cheers.

  • Exception in CRM system after creating post goods issue in ECC

    Hi Folks,
    We are facing an issue in CRM system. I will tell the scenario in details so that it would be helpful to understand,
    We are creating sales order in CRM system and it got replicated to ECC correctly. We have maintained action definition to trigger email to the customer.
    Then we will be creating delivery and then post goods issue(PGI) for items replicated to ECC systems. After PGI system will update the status in CRM sales order and here configured an action definition to trigger an email to customer.
    We have created custom badi implementations for action definition execute badi to send email. Emails are triggering correctly but after PGI creation while replicating the changes from ECC to CRM we are getting an exception in standard code because PPFTTRIGG table does not have entry. We have failed entry in CRM inbound queue and then did some debug and come to know the place of issue. Help me out with some inputs here.
    Best Regards,
    Dharmakasi.

    Hi,
    I have identified one thing here, if the action definition does not have start condition system is not updating that entry in PPFTTRIGG table. Here i got 2 questions my mind
    1. Why system is not updating the table with all the action definitions available in action profile
    2. Why system is looking for the entry which was not updated in PPFTTRIGG table?
    I do not understand problem with updating table or with action profile itself. Please give some input here. If we deactivate all the definitions which does not have start condition then there is no error.
    Best Regards,
    Dharmakasi.

  • Ability to patch SAP by Module within Core R/3 ECC

    A couple of years ago, SAP came out with a statement that in future releases we'd have the ability to 'patch' and / or 'upgrade' the core R/3 modules separately
    For example -
    You could patch the SD module only
    We're on NW2004 ECC 5.0 and I sure don't see this ability to exist - still see the APPL, BASIS, HR support packs without any regard for a specific module (other than HR)
    Thoughts anyone?

    Hi Doreen,
    sorry to tell you, but this was perhaps a good "sales gag", but the way is more ore less going the other way around:
    This is not possible right now and not "forseeable" at least not for "SD" or "FI" in an ECC system. Perhaps in future for BW in an ERP system. But even this is unlikely because of the basis & kernel dependcies.
    Because of the support package stacks (if you like them or not) - the idea of SAP is totally the other way around, because they found out, that only this way it "stays more or less" maintainable ...
    Regards
    Volker

Maybe you are looking for