Corsair K30 Keyboard and Logitech Mouse

I have a new Desktop with Win 8.1 and Win 7 as dual boot with above keyboard and mouse.
When I boot to Win 8.1 every thing goes on fine.
But when I try to boot with Win 7 the keyboard and mouse are not getting initiated and I am unable to enter the
Password and boot to Win 7.
How to solve this ?

do you remember if there is any changes at your Windows 7 OS before this issue happen?
I suggest update your keyboard software
update K30 keyboard
regarding your mouse keyboard, if there is updated software at manufactured site, please update it
try to go to safe mode or choose last known good configuration at advance boot option (F8)

Similar Messages

  • New Mac Mini and 2006/2007 Wireless Keyboard and Mighty Mouse

    Will my old wireless keyboard and mighty mouse from 2006 and 2007 work with the new Mac Mini?

    Thank You!

  • Brand new iMac cannot pair bluetooth keyboard and magic mouse

    Hi there!
    Just received brand new iMac 21" yesterday. Unboxed it, turned it on and none of both bluetooth devices (keyboard and magic mouse) managed to get paired.
    I was able to connect a USB mouse to log into the Mac. Did all turn off/on Bluetooth, turn off/on iMac several times with no luck. Weird thing is that when I lift keyboard on a 30 degree angle above my desk it seems to actually pair with the iMac but then when back to original position it disconnects.
    I've tried the magic mouse with my 2008 Macbook and works flawlessly. After several attempts never managed to pair magic mouse with iMac and as said earlier keyboard is not working on a standard position on my desk. It is frustrating to have paid close to 2,000$ for something that does not even work out of the box... Any ideas or suggestions?
    I'm planning to take it today to nearest Apple Stores but have a bad feeling about "genius" folks being able to help me out. Would be worth changing iMac for new one?
    Thanks a lot in advanced!

    Thanks Barry! If SCM reset means the following:
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    I've done that several times yesterday with no success. "SMC Reset" sounds quite fancy but then you google it and find that is a "simple" shut down and restart protocol... I tried "shutting down" by both selecting option via OS and also physically on the button behind screen.
    I appreciate the help but unless I've done that "simple" protocol wrong it is not working.
    Sorry for the frustration from my side. It just seems too much of a vague story when you hear Apple friends talking things about "the best OS", "best desktop",...and then you pay about $2,000 and find this yourself.
    If anyone else interested I commit to keep this up to date with the feedback I'll get from "genius" folks today. Hopefully they'll prove themselves to live up to their position naming.

  • Wireless Keyboard and Magic Mouse (Bluetooth) Problems

    Hi folks,
    I recently got a new Mac Mini, wireless keyboard (Apple) and Magic Mouse. During high LAN activity, the keyboard and Magic Mouse will often lose connection and will have trouble re-connecting even when LAN activity goes back to basal levels. If they do not lose connection, the performance becomes terrible and both lag significantly during use.
    This behavior does not happen on my MacBook Pro.

    Other things to check-
    Do you have anything on top of your mini, or is the top of the mini under a desk or other obstruction? The bluetooth antenna is (as you are looking from the top down at the mini) to the top right of the Apple logo on the plastic case top. Try clearing any clutter (if there is any), or establish a clear line of sight with your keyboard and mouse to the unexposed top of the mini and see if the dropouts occur.
    Also, microwaves wreck havoc with bluetooth. Any machinery in the same room as your mini and keyboard/mouse?

  • Mac Mini 2014 with Apple bluetooth keyboard and Magic Mouse

    Hi all,
    I'm currently in the process of moving from my old MacBook to a Mac Mini 2014 and I have a couple of questions regarding functionality of the Apple bluetooth keyboard and Magic Mouse with the Mac Mini.
    As these are the only keyboard and mouse I have available to me as I currently only have the one computer in the house, I'm wondering how I will pair them with my new Mac Mini (arriving next week for Christmas) without a wired user input device (keyboard or mouse). When I paired them with my MacBook, I of course had its trackpad and keyboard to navigate through the various steps, but as the Mac Mini does not have these, how does the pairing process work? Will I have to get my hands on a wired mouse/keyboard? I'm asking in advance because I need to get my new system up and running to start work on 27th December and so I need to know if I should pick up a cheap wired mouse/keyboard in advance.
    My second question relates to the Mac Mini, Apple bluetooth keyboard and Boot Camp. Usually, when I want to boot into Windows on my MacBook, I hold down the Option/Alt key on my MacBook's built-in keyboard to be given the choice of operating systems. Sometimes when I do this using the bluetooth keyboard, it hasn't paired in time and it boots straight into OS X, so I have to wait until that has booted, shut down and then try again. Clearly, this might be a problem on a Mac Mini if I have urgent work I need to complete in Windows, so rebooting over and over until my keyboard finally pairs in time isn't desirable. Any tips here would be greatly appreciated!
    Thanks in advance for your help!

    If you unpair your BT KB and mouse from the old computer they should pair during the initial setup of the Mini. However, sometimes they donot a wired KB and mouse is required. You can use any USB PC KB and mouse.
    Once you get the BT KB to work you can use the Option key on the BT KB while booting to get your choice of OS to boot into.

  • I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

    I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

    You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
    http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
    Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
    http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
    Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
    http://fastmac.com/bluetooth.php
    In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

  • Wireless keyboard and wireless mouse on macbook 10.4.11

    hello,
    I recently bought wireless mac keyboard and magic mouse for my macbook with 10.4.11 version.
    The basic functions of the keyboard (letter keys work, numpad works) and mouse work (move cursor, left&right click) , but the special keys on keyboard and touch gestures don't work.
    Is there anything I could do to make the special keys on keyboard & magic mouse gestures work on my macbook?

    The Magic Mouse is not compatible with your operating system. See here, at the bottom:
    http://www.apple.com/magicmouse/
    I imagine that your new wireless keyboard, if it's Apple branded, is this one, which is also not compatible with your OS:
    http://www.apple.com/keyboard/
    Again, the system requirements are on that page. They should also have been on the boxes at the store or on the web site before you bought them.
    You need to upgrade to either 10.5 (Leopard; call the Apple phone sales line, as there are no more available in stores) or 10.6 (Snow Leopard; available everywhere Mac software is sold).

  • Will the Wireless Keyboard and Magic Mouse work with my iMac G5?

    My Dad just sent me his old iMac G5 17". and I was wondering if the Wireless Keyboard and Magic Mouse will work with it!? I don't really have a place to put the computer.. so I was hoping to get the wireless mouse and keyboard so I don't have to be connected to the computer.

    I have the most recent (2 AA batteries, not 3) wireless keyboard and magic mouse running on a PowerMac G5. Your iMac G5 has the same class of processor, which isn't Intel. My Mac has built-in bluetooth support, which is what these products use. I'm unsure if your iMac has bluetooth built-in or not, but if it doesn't, you can purchase the Belkin bluetooth USB dongle. That has been widely reported to work just fine within OSX.
    Anyway, yes, your iMac G5 can run the wireless keyboard and mouse. You just might have to work a little for it.
    Good luck!

  • Help with Wireless Keyboard and Mighty Mouse please!

    Hello. I own the wireless Mighty Mouse as well as the wireless keyboard for Mac, and while ago I set them up to work on my Mac, but I don't use them very much so I want to give them to my parents for their Mac. The thing is, I forgot how to set it up or install it or whatever. Can anyone tell me how to get the wireless mouse and keyboard to work, or what the install process is for them? Was there a CD that came with them that I need to install drivers with or something? Anyways, I have the mouse and keyboard sitting up here next to this computer, and I've turned them on with the switches on the back, but they're not working. What do I do next? Thank you!
    -- Andrew

    Solution
    Turn your Bluetooth keyboard and/or mouse off for 30 seconds, then back on.
    If the keyboard or mouse doesn't respond, or if an alert message appears again:
    Connect a USB keyboard or mouse.
    Open Bluetooth preferences (choose System Preferences from the Apple menu, then click Bluetooth).
    Verify that Bluetooth is turned on. (You can also do this with the Bluetooth menu bar item, if enabled).
    Pair the keyboard or mouse by setting it up as a new device.

  • Problem with wireless keyboard and wireless mouse

    All of a sudden, after more than 6 mos., I am having problems with both the wireless keyboard and wireless mouse. I am getting a "connection lost" message on the screen with a picture of the keyboard. It only stays there a few seconds, disappears, then the keyboard is ok again.
    The mouse is even more frustrating. I am not using the ball for scrolling, just moving the mouse to move the pointer. It will be working perfectly, then for 15 to 30 seconds will either not respond, or be extremely slow, then be ok again. This has repeated a number of times today, especially when I am in iTunes. The batteries are fine in both devices, since I had the problem, changed the batteries, and still have these problems. Any ideas?

    Brian, I called Apple and I think they fixed the problem with the keyboard. Unfortunately, I did not write down the exact keystroke sequence they gave me, but let me tell you what I did. I unplugged the computer and waited 60 seconds. After I plugged in back in, I was told to immediately hold down 4 keys. I think they were something like Ctrl, Command, Shift, and R. Those may not be the exact keys, maybe it was Option instead of Ctrl, and maybe R is not right. I am not sure. Those keys are held down until the second beep is heard after the computer was turned on. Supposedly, this re-established connections between the computer and the keyboard. Sorry I did not write down the key combination. If you can, call Apple and get the proper key stroke combination

  • Pairing Apple Bluetooth Keyboard and Magic Mouse Windows 7 64-bit

    Evening Apple Forum!
    I'm camping with a problem regarding the pairing of my two bluetooth devices: the bluetooth keyboard by Apple and the Magic Mouse in Windows.
    I'm running Windows 7 64-bit through Boot Camp 3.1.
    I have tried pairing them as I normally would, turn on the device and then let the MacBook search for bluetooth devices. This, however, didn't work out for both the keyboard and the mouse.
    After some searching in several forums, I wondered if I had to update the driver operating Bluetooth in general. I came to the conclusion this wasn't needed after checking the 'Device Manager' in Windows. The Device Manager displayed under 'Bluetooth Radios' two drivers:
    - Apple Broadcom Built-in Bluetooth
    - Microsoft Bluetooth Enumerator
    This seemed fine.
    After this, I read through a .pdf file regarding Boot Camp directly from Apple, which pointed me towards another method of pairing the bluetooth devices: the devices had to be turned off before or while the MacBook was searching and turned on again after that. Sadly this didn't do anything either.
    I'm clueless, I have no idea whatsoever how to get this to work. This support forum is always a last resort for me because usually I can deal with a problem myself by basic knowledge or reading some forums. This isn't the case this time.
    If anyone has an idea of how to pair these devices to my MacBook, feel free to reply.
    Thanks!

    I've found the solution here on the forum:
    http://discussions.apple.com/thread.jspa?messageID=11491400&#11207285
    All I did was unpair my mouse on Mac and then pair the mouse on Windows 7 and finally re-pair the mouse on Mac. It worked perfectly. It seems that Windows 7 likes exclusivity.

  • Wireless keyboard and magic mouse

    Getting these two peripherals, plus an M-Stand (all bought at the A store) were great purchases. This is my one year report.
    The reason I got this set up (which can get burdensome to carry when you go on long trips) was because upon getting my mbp I didn't like the feel of the case's hard edge against my wrist when typing extensively (which, as a writer, I do). But I also really liked the design of the wireless keyboard and the magic mouse (although at first it took some getting used to to the mouse, even bought that little gummy add-on some enterprising cats had come up with, but chucked it pretty quickly after that as it became useless).
    so anyway, what turned out to be another advantage of using peripherals with my macbookpro is, since in the year that I got this mbp I used the actual keyboard very little, the computer still looks pretty much news, none of those grease marks on the wrist page or signs of wear and tear on the trackpad. pretty awesome that
    any thoughts from anyone else?
    Johnny Chacho
    PS: oh, the last thing I should add. I've always felt some major iMac-envy. I like the big monstrous desktop computer look better than laptops. ideally, I would have a humongous iMac and the 15 incher, but for now I have to content to myself with the latter. but by mounting it on the M-stand, I'm sort of making it look like an iMac in a way aren't it

    Joni Chacho wrote:
    I guess the only question was to ask if this kind of set up was prevalent among macbookpro users.
    That's a different story.  If that is what you want to know, yes I have a magic mouse, apple wireless keyboard and also  have the mStand.  It is convenient to use when at a desk to bring the mac to eye level.  Many people use this type of setup.  Sorry for the misunderstanding. 

  • Wireless keyboard and mighty mouse do not work with windows Vista

    I have a new iMac core 2 duo 20" used by my granddaughter.
    The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
    Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
    Any suggestions would be helpful.

    I had the same problem on the mac mini from my dad with windows XP.
    I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
    I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

  • Unable to connect Bluetooth Keyboard and magic mouse

    I am unable to connect to either my keyboard or mouse. I have a bluetooth keyboard and magic pad in my office that was paired to my Macbook pro but I am not bringing it anymore sense getting my iPad. The iPad seems to see the keyboard but not the pad. But neither will connect. I'm baffled.
    Any suggestions will be much appreciated.

    What do you mean the iPad sees the keyboard but will not connect? Have you un-paired it from the other computer? Should do that first, then do the pairing with the iPad...if it is a supported keyboard. Posters have noted they are unable to pair the old A1016 Bluetooth keyboard, ca 2005, with the iPad.

  • Keyboard and Magic Mouse Bluetooth not working

    Hi!
    I have an imac 21.5 late 2012, the problem is that every time you turn on the computer, keyboard and mouse do not respond, to make it work I have to turn it off and unplug all cables and let it without energy about 10 seconds, then i turned it on, and works great.
    Anyone have any similar problem? The imac has only one month of purchasing it and this is driving me crazy, it´s not suppose to act this way.
    I'll be very grateful if someone helps me

    Hey csaady,
    Thanks for the question. I understand you are having issues with your wireless peripherals when starting your computer. The following article may be of assistance to resolve this issue:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    If you continue to have issue, you can also reset the PRAM for your computer:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Thanks,
    Matt M.

Maybe you are looking for

  • How do I get iTunes to accept FLAC files into the library?

    If I want to use iTunes to catalog FLAC files (but NOT play them...as I use my logitech Squeezebox fior that) how do I get iTunes to accept FLAC files into the library?

  • Memory Leak in PDA Example App.

    I am running the Read Dig Port.VI example that is located: C:\Program Files\National Instruments\LabVIEW 8.2\examples\daqmxbase\PDA\Dio on my PDA (HP iPAQ 2790b) with NI CF 6004 DAQ card. When I check the program memory on my PDA, I see a leak of .01

  • CUA-User does not exist in Child system

    Hi All, User has been created in  child system through central system,and respective roles also assigned through central system.Now,the issue is when user is trying to log in child system,it's showing user does not exist. I did Text comparison also,s

  • Compatible multifunction printer

    Switched to Mac (after 25 years on PC) this week. Overall very content. I have 2 multifunction devices 1) Lexmark x9300 2) Samsung CLX-3160FN. I have been unable to set either one up through the time Capsule with complete functionality. Are there any

  • Installation of RAC 10g R2

    I need to setup Virtual IP in both the sever. I put two IP in each server as public in LAN card. But it has a problem in virtual IP. Could u pls tell how to setup Virtual IP.