Cos_cache_add_dn_tmpls debug message

When I enable nsslapd-errorlog-level: 65536, messages like the following show up in the error log:
[14/Mar/2007:15:27:41 -0700] - DEBUG - conn=-1 op=-1 msgId=-1 - cos_cache_add_dn_tmpls: incomplete cos template detected in cn=posixAccount,ou=cosTemplates,dc=example,dc=com, discarding from cache.
The CoS has actually been working just fine, but I'm still wondering why this message shows up.
The associated CoS template and definition are:
dn: cn=posixAccount,ou=cosTemplates,dc=example,dc=com
objectClass: top
objectClass: extensibleobject
objectClass: costemplate
objectClass: ldapsubentry
cn: posixAccount
cosPriority: 10
gidNumber: 101
dn: cn=posixAccountCoS,dc=example,dc=com
objectClass: top
objectClass: cossuperdefinition
objectClass: cosclassicdefinition
objectClass: ldapsubentry
cn: posixAccountCoS
cosTemplateDN: ou=cosTemplates,dc=example,dc=com
cosSpecifier: objectClass
cosAttribute: gidNumber
I don't understand why the cosTemplate above would be considered "incomplete"?
Anyone see this before? Is it safe to ignore?
By the way, this happens on both 5.2_Patch_4 and 6.0.
Many thanks,
-- George

You can safely ignore the message.
The message is coming from the fact that the template is being cached while the CoSDefinition does not exists yet and the guiNumber is not yet defined as a virtual attribute.
When the CosDefinition is loaded and cache, the template is checked again and cached, so everything works.
It is generally a best practice to define CoSDefinitions before the CoSTemplates.
Regards,
Ludovic.

Similar Messages

Is there an easy way to suppress debug messages from plugin.jar?

When using the plugin.jar library (included in JRE 1.4.2 and 1.5)
my Java Console is riddled with tons of debug messages like:
<<< ProxyClassLoader: defined LiveConnectProxy class. >>>
<<< Here're the permissions you've got: >>>
<<< java.security.Permissions@b614d0 (
(java.net.SocketPermission 127.0.0.1 connect,accept,resolve)
)I'm using the plugin.jar (replacing use of the old netscape.jar)
to bridge communication between Java Applets and JavaScript.
Each time the Applet calls back to the JavaScript side,
the callback JavaScript function makes a call to parseInt() to
convert one of the parameters passed from a string to an integer.
Each time parseInt() is called, the message above appears
in the Java Console.
I traced down the source code for this message to a debug()
statement inside the plugin.jar's class loader, but I'm not sure
how to suppress it easily.
Does anyone have any ideas I could try?
Here's the code from the Java-side:
synchronized( this )
     try
          final JSObject window = JSObject.getWindow( applet );
          if( window != null )
               final String[] stringArgs = new String[3];
               stringArgs[0] = labelName;
               stringArgs[1] = labelDisplayName;
               stringArgs[2] = labelValue;
               log.debug(stringArgs[0]);
               log.debug(stringArgs[1]);
               log.debug(stringArgs[2]);
               window.call("MyJavascriptCallback", stringArgs);
          else
               log.error("Javascript window unavailable.");
     catch( final JSException e )
          // Note: Occasionally, getWindow() will throw an exception
          // without any meaningful reason.
          // ( http://www.raditha.com/blog/archives/000938.html )
          // Possible cause: This can send updates at a fraction of a
          // second. This may be causing issues within the Plugin.jar
          // used to handle the JavaScript callback.
          log.debug("JSException", e);
}

Here's what I've found out...
The messages are coming from the MRJPlugin.jar provided by Firefox.
Within the netscape.oji.ProxyClassLoaderFactory class,
the following line...
System.out.println("<<< " + message + " >>>");
...appears to be the cause and cannot be turned off by a configuration setting.
The home URL for the MRJPlugin.jar is:
http://www.mozilla.org/oji/MRJPlugin.html
The last time this library had an update released was in 10/31/2000.
However, this is the Mozilla source; not Firefox.
Although changing the MRJPlugin.jar source to remove this line will appear
to fix the problem, I'm not sure of the best way to distribute the updated
MRJPlugin.jar without conflicting with Firefox's update process.
Any thoughts?

Debug messages in Stored Procedure

is it possible to see the debug messages written in the Stored Procedure when invoking it from WLS.
using wls 8.1 SP3
DB :Sybase
Driver : weblogic.jdbc.sybase.SybaseDriver
setting debug parameters (
-Dweblogic.Debug=weblogic.JDBCConn,weblogic.JDBCSQL,weblogic.JTAJDBC
)is not enough. also using P6Spy does not help here ...

Yuval Avni wrote:
is it possible to see the debug messages written in the Stored Procedure when invoking it from WLS.
using wls 8.1 SP3
DB :Sybase
Driver : weblogic.jdbc.sybase.SybaseDriver
setting debug parameters (
-Dweblogic.Debug=weblogic.JDBCConn,weblogic.JDBCSQL,weblogic.JTAJDBC
)is not enough. also using P6Spy does not help here ...Hi. If/when Sybase sends informational messages to the client, a driver will typically
make them available from the statement or connection or even result set via SQLWarnings.
Try the getWarnings() methods of those objects.
Joe

How to insert debug messages in a report

All,
I am facing a problem with one report in apps environment.
When I run the sql in toad or when I run the report from reports
builder I am getting data. But, when I run the same report using
concurrent program I am not getting any data for the same inputs.
I am not sure what is wrong. I want to put some debug messages.
Can you please tell me how to put debug messages in reports?
Thanks.

973508 wrote:
All,
I am facing a problem with one report in apps environment.
When I run the sql in toad or when I run the report from reports
builder I am getting data. But, when I run the same report using
concurrent program I am not getting any data for the same inputs.
I am not sure what is wrong. I want to put some debug messages.
Can you please tell me how to put debug messages in reports?
Thanks.Please post the details of the application release, database version and OS.
What is the type of the report?
Please see the following docs to enable debug/trace.
How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]
Thanks,
Hussein

Debug messages in log4j

Hello,
I'm using log4j and JBoss and I'm getting a large number of debug statements in my log file. Does anyone know how to disable these debug statements?
Thanks in advance,
Ger

Just today I went through the same horrible ordeal.
A couple notes about the default JBoss log4j.xml file it seems to affect the logging somewhat, from my understanding you SHOULD do this:
The <root> category should have a priority added:
<root>
<priority value="WARN" />
<appender-ref ref="CONSOLE"/>
<appender-ref ref="FILE"/>
</root>
That should set the default root category to only display WARNING messages. There's another category (name="org.jboss.resource.connectionmanager.JBossManagedConnectionPool") with priority set to TRACE. Change that to WARN or ERROR.
I set up my own server directory structure and left out the log4j.jar from the lib directory, so it hadn't been actually reading the XML file. Just something to watch out for.
Another thing I found was that the bin/run.jar has a log4j.properties file with rootCategory=DEBUG which generates the boot.log file. I un-jarred the file and set that to INFO, then re-jarred it... I couldn't get rid of all the DEBUG messages without doing so.

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". Has anyone else seen this?

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?

The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth

Debug Messages missing in Forms 9i?

When running a form from forms designer with debug messages checked I don't get a message displaying the trigger name, I only get a Please Acknowledge Message alert box.
Is there a setting that I may have inadvertently set that would prevent the messages from being displayed?
Forms version 9.0.2.12.2.
Thanks
Richard
P.S. We have just started to assess Forms 10g (9.0.4) for Windows and have noticed huge improvements in performance - about 50%! Don't know what you guys have done but initial impressions are excellent. We are looking to roll this out to production as soon as possible.

The problem with debug messages is a known one (Bug 3376171) and will be fixed in forms 10. (not 10g - 9.0.4)

How to turn off DEBUG message in Jdeveloper 9.0.3

Folks,
When I upgraded my Jdeveloper from 9.0.3 Preview version to formal release, it takes 5 minutes to load the first jsp page which used to take less than 1 minute. One reason I can think of is that all the DEBUG messages are showing up now and printing out those messages could take minutes. I can not find the way to turn off those DEBUG message. Please help.
Thanks,
Yibing

There should be no diagnostic messages from BC4J by default.
Adding the Java VM parameter -Djbo.debugoutput=console sets the jbo.debugoutput system property to the value console and makes the messages appear.
Double-check that you don't have this set in your "Runner" panel.

NO MORE DEBUG MESSAGES!

it is kind of hard to stay in the forum rules, specially the
insults part (is inept or negligent allowed by forum rules?), on
how i feel right now. why somebody in adobe thinks that a final
user cares about debug messages? i am using firefox i have many
tabs open, i am watching whatever and all the tabs get blocked
because somebody thinks is the job of the final user to debug
something he/she didnt make, specially the 'select code location',
which code?, so i keep getting a popup asking where to debug (if
local or to place the id of the code to debug). there are pages
that are so hard to watch because of this, are the adobe people so
(...)... ARGHHHHH!!!.. i keep disabling flash player because of
this, i only turn it on to rate songs in yahoo launchcast or watch
youtube videos or a few more pages, then i forget to disable it and
the problems begin ('something' reminds me to turn it off again),
if there is one of those popups asking the location of the code to
debug and disable the player without closing this message, adobe
offers me a nice browser crash. are they stupid or is the final
user the debug monkey for their products?, i mean, is not like it
does not happen all the time (either firefox or explorer), they see
by themselves something is just plain wrong, but does somebody else
has to tell them, yes it is wrong even tough you see it by
yourselves, please make it right? i mean, fix that stupid thing
once and for all, why do we care about debug code we didnt even
made ourselves, talk about 'user experience'

Originally posted by: cap_nemesis.hotmail.com
if there are more than one log4j.properties on different levels (server,
webapp) things can get confusing :-)
"Mark Daring" <[email protected]> schrieb im Newsbeitrag
news:drgpe7$1o0$[email protected]..
> How can I change the tomcat logging level, so no more messages like:
> "DEBUG [ContainerBackgroundProcessor[StandardEngine[Catalina]]]
> (ManagerBase.java:653) - Start expire sessions StandardManager at ..." are
> sent to the console?
>
>

Display debugging message in jboss environment

Hi every body,
I am trying to plot a graph using jfreechart on jsp page. I want to debug because I fount the class cast exception error.
Can you tell me please that how can I dispaly debugging message using jboss environment.
Where can I look this message.
public Log logger=LogFactory.getLog(this.getClass());
logger.debug("Before calling pageno");
Thanks and best regards

Perhaps you have to look at Log4J: [http://logging.apache.org/guidelines.html].
The standard log directory should be: jboss-4.2.1.GA\server\default\log

Debug or debug messages

We're running Forms 6.0.8.24.1.
If I want to compile a form with 'debug' on (to use with the debugger), the help tells me to set the 'debug' tickbox under Tools-> Preferences -> Runtime.
Only thing is I don't see this option there. However, the 'debug messages' tickbox is there but this seems to be a different thing.
I can get round this by running "ifcmp60 .... debug=YES" (at the command line) though this seems a bit naff.
I don't want to use 'Program-> Run Form -> Debug' as the form I'm intrested in is not at the top level, its called by a another form.
Is this to be expected or am I missing something?

of course.
you should define a logger for each, and set a suitable appenders .
for example -
<logger name="PILogger">
          
          <level value="fatal"/>
          
          <appender-ref ref="PIAppender"/>
     </logger>
     
     <logger name="CoreLogger">
          
          <level value="fatal"/>
          
          <appender-ref ref="CoreAppender"/>
     </logger>

Debug Message Options: Not able to change in Compact embedded 2013

Hello,
I am using COMPACT Embedded 2013 with a AM33x BSP from Adeneo and I'm trying to disable the output of Process ID and Thread ID on the serial console.
My output looks always like:
PID:032D000E TID:032C000E My message
Normally this should work with the Debug Message Options, but it don't!
I can't uncheck any checkbox in the Debug Message Options.
I have done some analysis to disable the output of Process ID and Thread ID and I found the code where it is added to the output. At this code (which is in \WINCE800\private\winceos\COREOS\nk\kernel\printf.c) there is no condition for printing out the process
and thread id. I can disable the output by commenting out the corresponding lines in printf.c build the nkmain.lib and do a clean sysgen. But I don't think that this is the right way to switching this off. Does anyone know a different solution?

To disable the PID/TID below is what you have to set
g_pOemGlobal->pfnWriteDebugString = NULL;
But i have observed earlier that during suspend & resume any debug prints during OEMPowerOff will use the NULL function pointer and cause the
system to crash.
The solution is to restore the kernel to use the default serial debug during OEMPowerOff()...
VOID BSPPowerOff()
    // If OEMInit() cleared g_pOemGlobal->pfnWriteDebugString to remove VID/PID
    // from debug output, g_pNKGlobal->pfnWriteDebugString will now be NULL (see
    // NKPowerOffSystem() in WINCE700\private\winceos\COREOS\nk\kernel\kwin32.c)
    if (NULL == g_pNKGlobal->pfnWriteDebugString)
        // Set kernel pfnWriteDebugString so that debug prints in OEMPowerOff()
        // do not crash the system.
        // NKPowerOffSystem() will restore the orginal value following return
        // from OEMPowerOff()
        g_pNKGlobal->pfnWriteDebugString = (PFN_WriteDebugString)OEMWriteDebugString;
Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com [email protected]

HT4993 DEBUG MESSAGE WDT TIMEOUT

hello my iphone 4s will shut off and restart on its own i have done a restore and all the common tricks. i get a debug message of wdt timeout.Is anyone that can help me? My screen is cracked but I dont think thats the problem.

really?
very bad, I hope to be able to reset the phone because
when I connect it to the computer restarts every 10 seconds.
if I do not have other choices ...
Thanks for all!

DEBUG MESSAGE: new exception propagation across deoptimization

Greetings,
we're detecting the following error in our server logs:
"DEBUG MESSAGE: new exception propagation across deoptimization has not been tested yet "
Has anybody seen this message before?
Could it be coming from the JVM?
Thanks and apologies in advance if this is not the appropriate forum for this question,
george.

"exception propagation across deoptimization" sounds like a very HotSpot VM-specific words, referring to some complex internal mechanisms that it uses. However, it's very surprising if a production JVM prints them for a production program. To make sure it's really emitting this message, you can probably download the JVM source code from JVM and grep it for this phrase...

ISDN debug message

Can someone help me to analyze this debug message? My call flow is DID -> Cisco.
debug isdn events
Jul 14 14:35:29.229: ISDN Se0:23: Event: Received a VOICE call from 9179390834 on B3 at 64 Kb/s Tone Value 0
*Jul 14 14:35:29.233: ISDN Se0:23: process_disconnect(): call id 0x6387, call type is VOICE, b_idb 0x62296CDC, ces 1, cause Resource unavailable, unspecified(0x2F)
*Jul 14 14:35:29.233: ISDN Se0:23: CCPRI_ReleaseCall(): bchan 4, call id 0x6387, call type VOICE
*Jul 14 14:35:29.237: CCPRI_ReleaseChan released b_dsl 0 B_Chan 4
*Jul 14 14:35:29.237: ISDN Se0:23: LIF_EVENT: ces/callid 1/0x6387 CALL_CLEARED
*Jul 14 14:35:29.237: ISDN Se0:23: received CALL_CLEARED call_id 0x6387
thanks

Copy, we see the disconnect for call id 0x6387 with cause code 47(resource unavailable).
Check here:
http://cisco.com/en/US/products/sw/iosswrel/ps5187/prod_troubleshooting_guide_chapter09186a00805584fa.html
Typical scenarios include:
?Out of memory
?Internal access to the TCP socket is unavailable
or out of DSP resources.
Hope this helps

Cos_cache_add_dn_tmpls debug message

Similar Messages

Maybe you are looking for