Cosmos does not notify me there is new voice mail?

My phone does not show new voice mail. Really causing problems since the only way I know I have new mail is by calling Verizon...

gbono, that would definitely cause issues, and have me just as frustrated too. Here to help out with this. Did this issue just recently start? Have you tried dialing *228, and choosing option 1? Once this programming completes, and your phone restarts, please turn off your phone, and remove the battery too for about 15 seconds. Place everything back in, and power it back on. Try placing a test call and leave yourself a voicemail to see if the notification returns. Keep us posted. NicandroN_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

My iPhone does not notify me of calls in Voice Mail. I will see that I missed a call but there are no messages in VM. Cellular data is off - only voice roaming. Suggestions?

My iPhone does not notify me of calls in Voice Mail. I will see that I missed a call but there are no messages in VM. Cellular data is off - only voice roaming. Suggestions?

DJTayLo, Let's get your voicemail working! I noticed you metioned that your Cellular Data is off. Visual Voicemail does need to be connected to Cellular Data in order to retreive voicemails for the iPhone. This can cause the notifications to be delayed. When you turn Cellular Data on do the notifications then show correctly? Which model iPhone do you have? We'll figure this out.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

iPhone: No sound or distorted sound from speaker

Re: Tecra S11 - TEMPRO does not notify me about new drivers

There are new drivers and BIOS available for my Tecra S11 but TEMPRO does not notify me.
Why?

PauPau: Bluetooth, WLAN and BIOS drivers are available for my T S11 (released in 2012). I think I reinstalled tempro a few month ago and I forgot to open it and accept licence agreement or something. When I posted this thread yesterday and after I clicked yes, I agree TEMPRO showed me there are new BIOS available. Sorry for that! But...
Macius: I have got BSOD about 6 times since 2012 january. WinDbg only shows me
Probably caused by : ntoskrnl.exe ( nt+7cc40 )
I also had lots of BSODs about 6 month ago, but that caused by a faulty hdd. I replaced it and reinstalled w7 pro and everything was OK until 2012 jan.

HT3529 My phone does not notify me by sound of a text msg .Everything is turned on and volumn is turned up . Any idea how to fix this

My phone a 4s does not notify me by sound of a new text msg. Have tried eveything I know so if anyone has a suggestion .

Thank you for your responses! Unfortunately, I tried resetting my preferences but it did not change the outcome. I was able to get rid of the export problem when I deleted the tabs in the formatting (Thanks, Eugene)...is there a setting a can change that would make my computer export the tabs normally (when my coworker exports the same document she does not have a problem even with the tabs...)
Thanks!
Caitlin

Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks.

"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!

"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!

Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik

The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
Ciao,
Antonio
P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

ICloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?

iCloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?
Thanks in advance

If your Mac is one year old it did not come with Lion, so you must have purchased and installed it yourself, or it is not installed.
Do this
Go to Apple Menu>About This Mac:
It should look like this:
If your version is anything other than 10.7.xx you do not have Lion (10.6 is Snow Leopard)

TS4268 My iphone 5 does not notify me when I get a text or incoming call anymore.

My iphone 5 does not notify me when I get a text or incoming call anymore. It will appear on the screen, but the screen does not light up and it does not give me a tone. If the phone is open (home page or any other screen) it will give me a tone.

Turn off Do Not Disturb.

Confirmation process in SRM does not work whenever there is a discrepancy

Hello,
we are on SRM 5.0 version with classic scenario(follow on documents in backed system - ECC 5.0). to procure maintainence service user cretes a shopping cart by selecting describe requirements method and UOM at times in incorrectly asssigned as EA so upon shopping cart approval a follow on ducument (purchase requistion) is created in ECC as per config set up(in SRM). Buyer while coverting this purchase requisition to PO rectifies this erroe and chages the UOM of meausre to Hr and send a PO to vendor.
we are not bale to use confirmation feature in SRM to perform receipt of this service. is this how system works? any configration or a BADI needs to be usd to allow to perform confirmation in SRM even tough there is discrepancy in shopping cart UOM and Purcahse requsition UOM.
when thre is change in UOM in ECC that Purchase
*Confirmation process in SRM does not work whenever there is a discrepancy (i.e. different UM )between Shoping cart and Purchase Requisition related to that Shoping cart.*
we donot use serive option in SRM and donnot MM service module in ECC.
any help on this will be much appreciated.
Thanks,
sairam

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

My auto-lock does not work properly in this new iOS 6

My auto-lock does not work properly in this new iOS 6

Do you have your Assistive Touch on? Per another user in another forum:
Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

I tried speeding up the beats per minute on of a few song on i-tunes following your instruction but it does not work. is there anything else that i should do?

i tried speeding up the beats per minute on of a few song on i-tunes following your instruction but it does not work. is there anything else that i should do?

You need to edit the audio file of the song to speed a song up. If you have GarageBand '11 on your mac, try this:
SPEDING UP SONGS

Cosmos does not notify me there is new voice mail?

Similar Messages

Maybe you are looking for