COSS table updation

Hi All,
I'm debugging the standard cProject application to find out where exactly the COSS table is updated.
But I'm not able to find out either any Function module which updates the COSS table or any other SQL satatement that updates the COSS table. So please inform me if any one knows that where exactly the COSS table gets updated.

Hi Madhvi Pandey,
COSS is not updated by cProjects itself, but by some CO-functionality on the connected ERP that is accessed through an RFC from the cProjects system. Even if the ERP and cProjects reside on the same system, you'll need to set your break-point at the RFC and activate RFC-debugging and continue (F5) on the ERP.
One possible starting point could be
CL_DPR_FIN_GECCO_CALCULATION->CALCULATE
where such an RFC can be found searching for
CALL FUNCTION 'DPR_CALC_PROJECT'
I hope this provides the pointers you need.
Best regards,
Thomas

Similar Messages

How to generate an entry in COSS table?

Hello, i need to generate an entry in the COSS table.How can i do this? Can i create a billing document using the cost center i have created?

Hi,
COSS stores totals for internal CO postings. So any CO posting, e.g. allocation (SKV5), costs transfer (KB11N), etc. should update COSS.
Regards,
Eli

How to regenerate COSS table for work order operation planning hours

Hello,
I am looking for a SAP report or a custom solution to update the table COSS table from work order operation hours. Several work orders incorrectly updated in the table COSS with result the cost is incorrect.
For example: In the work order opertions, I have planned 2.5 hrs and in the table COSS it is 1.5.
Much appreciate for your help
Bill

It is quite simple actually.
As soon as your array exceeds SDU (defaults to 2048), sqlnet will fragment the packet. (see: sqlnet more data to client messages in your trace file)
As soon as the packet is bigger than your NICs MTU, the NIC will fragment the packet.
So, depending on the number of bytes for 1 record, high array size make sense or don't make sense.
And ideally SDU should be a multiple of MTU.
So do high arraysizes make sense? Usually not.
Hth
Sybrand Bakker
Senior Oracle DBA

Auto update of Ztable when ever BSID or BSAD tables updated

Auto update of Ztable when ever DB table updated
Hi experts
I want my Ztable get updated automatically when ever a record is created or updated in BSID or BSAD tables.
Here clear requirement
Generally using Company code & Allocation number ( 18 char ) my programs access BSID & BSAD tables it is taking very long time for execution almost more than 30 minutes ( data in millions ).
Step 1.
I created a new Ztable with limited fields Company Code, Customer, Document, Allocation Number and Posting date.
Step 2.
Before look into BSID or BSAD my program searches Ztable for Customer number & Document number using Allocation field and Company code.
Step 3.
Once get the Customer & Document numbers accessing BSID & BSAD table is very easy (now just taking less than 1 minute).
Created a new program to update Ztable every day but BSID and BSAD are live table so I want my Ztable get updated immediately when any entry posted in BSID or BSAD
Please help me
Satya
Singapore

You need to check what is the procedure (T-Code) from which the data gets updated into these tables.
For example
when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI .

Problem in MSEG Table updation

Hello All,
The problem is related to MSEG table updation after Stock Transport Order (STO) is done between Manufacturing plant & Depot. The problem is described below with an example.
In case of STO the Supplying Plant or vendor is SP02 and the Receiving Plant or the customer is RP15.in the STO under the shipping tab for Customer the system is showing RP15 and under the Delivery address tab for Vendor the system is showing SP02.
While during PGI when the material document is generated when we check the MSEG table two line items have been generated where we found that the field WERKS contained SP02 & RP15 against which the feld XAUTO is showing blank space & X symbol respectively.But in case of both LIFNR & KUNNR fields it is showing blank space, which indicates that both the vendor & customer fields are not getting updated in the MSEG table.
Now I want the system to pick up the data for KUNNR field (in case of XAUTO is X) also in the MSEG table i.e. RP15 should also be displayed in the MSEG table.
Is there any configuration to attain my requirement?
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka Mitra

the ADRx tables are central tables that are used from various transactions in SAP.
e.g. from customizing, master data maintenance, transactional data, such as purchase orders and sales orders.
use the ADRNR from ADR6 table and then lookup an entry in table ADRC to find and hint to its origin field ADDR_GROUP

Calling Batch input from Web Dynpro - any alternatives for table updates?

Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, Tine

Hi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra

How to capture the table update

How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?

hi ,
follow these steps:
1. After you selecte the search help for New Responislbe person, domodify gets triggered.
2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
4. Finally bind the name fetched with the attribute binded to New Responsible person name.
Wdomodify :
************* *Read the New REsponsible person Pernr* ***********
DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
DATA lv_carrid LIKE ls_cn_sflight-carrid.
* navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
* get element via lead selection
lo_el_cn_sflight = lo_nd_cn_sflight->get_element( ).
* get single attribute
lo_el_cn_sflight->get_attribute(
    EXPORTING
      name = `PERNR`
    IMPORTING
      value = lv_carrid ).
****** *Check whethre a value has been entered in PERNR* *************
if lv_carrid is not initial.
*************Select Name based on pernr entered* ***********
select ename from pa001 into lv_ename where pernr = lv_carrid.
*******Set the Name atttribute with the ename value fetched* *****
lo_el_cn_sflight->set_attribute(
      name = `NAME`
      value = lv_cename ).
endif.

Tables updating for atransaction

Hi All,
i wnat to know is there any transaction code or program to know the tables updated for a transaction.
we have a transaction called PPOM and FS00 ,i want to know which tables are updated when i create new records for these transaction codes.
With regards,
kiran I

Hi,
You can check tables CDHDR and CDPOS tables.
You can check the modified tables, values, by which transaction does this modification has been done.
Give current date to check. As these are cluster tables, it may take some time for retrieving data.
CDHDR - header details
CDPOS - item details
Regards,
Sailaja.
Dont forget to reward points, if answer helps you.
Message was edited by: Sailaja N.L.

Tables updated while creating order, before saving

hi friends,
Please provide list of tables updated while creating the order, before saving it.
regards,
vandana arora

Hi
The following tables get updated
VBBE - Sales Requirement
VBLB - Release Order Data
VBAK - Sales Document Header
VBPA - Partner Table
VEPVG - Delivery Due Index
VBAP - Sales Document Item Data
VKDFS - SD Index: Billing initiator
VAPMA - SD Index: Order Item by Material
VAKPA - SD Index: Order Item by Partner Function
VBEP - Schedule Line
VBKD - Sales Doc: Business Data
VBEH - Schedule Line History

How downtime can be reduced for setup table update.

Hi;
Can anyone tell me various ways to reduced system downtime for setup table updates.
thanks
Warm Regards
Sharebw

Hi,
You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
try Early Delta Initialization
With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
You cannot run an initialization simulation together with an early delta initialization.
hope this link may make you clear about early delta init
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
thanks,
JituK

Which are the tables updated in SRM and R/3 System for SC created?

Hi,
I want to know which are the tables updated in SRM system and also in R/3 system, when a Shopping Cart is created. Also how do i get the PO number for the Shopping Cart created.
Thanks.
Regards.
Rahul

Hello Rahul,
All list of tables for eg. SC You can find in transaction BBP_PD on SRM side.
These tables are (SRM):
- CRMD_ORDERADM_H - for Header (Business Transactions Header)
- BBP_PDHGP - Business Transaction Purchasing Information
- CRMD_ORDERADM_I - for Item - Business Transaction Item
- BBP_PDIGP - Business transaction item-Purchasing information
- BBP_PDBEI - Backend Specific Item Data
On R/3 side:
EBAN - purchase requisition
EBKN - purch. req. account assignment
Regards,
Marcin Gajewski
please reward points for helpful answer

RAISING AN EVENT WHEN DATABASE TABLE UPDATES

hi all,
i want to raise an event when database table updates.For eg : if a price of a material has been changed then i have to raise an event and run the abap program in back ground.i know transaction SM62 to create event, i dont know about transaction SM64. please give me the procedure how to solve this problem. i dont know work flow. please give me a sample code how to raise event.
thanka and regards
suresh

Hi Suresh
It is important to understand that the SAP architecture abstracts the database from the application.
I think that you should look for ways that the application triggers an event when an update has taken place, rather than the DB.
Two ways of doing this that spring to mind are change pointers (for the ALE interface, see menu SALE) and Business Transaction Events (various things including CRM integration, see menu FIBF).
The latter works very well for sending prices to CRM when they change. I am more familiar with this than ALE so I will discuss it.
If you go to menu FIBF and then follow menu path Environment -> Info System (P/S), and then run the report for event 00503301, you can find documentation and a sample function module that you can copy.
Once you register your new function module in the event tables then it will be called when prices are changed.
Cheers
Dom

Wrong VBAP table updation

Hi
Facing a problem with wrong VBAP table updation.
Sales order shows Business Area" A " at both header and Item Level but in VBAP table the business area updated is " B ". can't understand why it is happening.
Changelog doesn't indicate anything
Thanks and regards
Nikhil

Hi,
Can you check how the business rule that is assigned at SPRO-> Sales and distribution -> basic functions -> Account assignment/Costing -> Business area account assignment?
Regards

Table Updation through Workflow

Hi All,
I have a scenario in my project in which a workflow is to be triggered when an entry is made in a table.
Now this workflow has to read some data from some tables and then update some other tables.
My doubt is it possible through workflows to update the tables? If yes is it advisable.Also how will the
updation happen? Should methods for updation will be written in BO methods? Or should a task be called
which does the same.
Please suggest,
Saket.

Hi Saket,
Yes it is possible!
To trigger workflow from table updates you can use table level events. Refer to
Re: WorkFlow when Data is changed in Table or program
Also you can update a table from a workflow. To do this, create an Activity step in workflow. In this, you can call a BO method. This BO method would store the code to update the database table required.
Just take care of the bindings between the method -> task -> workflow container.
Hope this helps!
Regards,
Saumya

Table updation through Visual Basic

We are not able to update employee master table which has 73 columns. The problem is it is not allowing to update after certain number of columns say 50 columns. This is occuring only thru VB and not in SQL (i.e thru instert syntax).
Can anyone tell what is the solution?

Hi Saket,
Yes it is possible!
To trigger workflow from table updates you can use table level events. Refer to
Re: WorkFlow when Data is changed in Table or program
Also you can update a table from a workflow. To do this, create an Activity step in workflow. In this, you can call a BO method. This BO method would store the code to update the database table required.
Just take care of the bindings between the method -> task -> workflow container.
Hope this helps!
Regards,
Saumya

COSS table updation

Similar Messages

Maybe you are looking for