Cost and source of restore disks?

Does anyone know how much and where I can get restore disks?
I updated to win 8 thinking I oul burn them later. WRONG. The restore program does not work in 8.
thanks for any assist.

Made some calls:
1-877-737-1082 will get you there. $59.00 will get you some disks.
Making a bit of a great profit me thinks.

Similar Messages

I have recently gotten a used apple Ibook g4 , but it wasnt wiped clean and the old administrator password is still there and i dont have any restore disk can anyone assist me in at least getting the administrator changed . Thank u

i have resently gotten a ibook g4. and it hasnt been wiped clean and has no restore disk , i really cant figure out how to get around the administrator it is still on the computer as well, if anyone can help thanku

Hello Ronda,
I am in the same situation as Kathylynn. My Ibook was purchased through a school district. They recently upgraded their computers and have sold the outdated ones. I have no way of getting in the information through the previous owners.

Using Apple Restore Disk

Ok the good news is that I have located my original disks that came with my G4. So I went and put the restore disk into the cd drive and it comes up on the screen. Now when I use disk first aid it tells me that I have a node 4 error adn that the hard drive cannot be mounted. I then tried to do a restore but all it gives as an option is the restore disk and the the hard drive. I am now at a new loss! I have a feeling that it is probably something easy and I don't want to pay someone to tell me this! Please any help I can get would be awesome!

Hi, mprestonsoccer -
A node error indicates damage to the disk directory. This Alsoft support article addresses that -
Alsoft - Node error
Such damage is usually not repairable by Disk First Aid. Alsoft's DiskWarrior should be able to repair that damage.
Note - the current versions of DiskWarrior, v. 3.x, boot only to OSX. If your machine is a G4 (AGP) or later model, there is a firmware update, v. 4.2.8, recommended in order to use OSX on the machine; a G4 (PCI) model does not need a firmware update. If your machine needs that update and it has not yet been done, then look on EBay or other places for a copy of Diskwarrior v. 2.x - those versions boot to OS 9.
You can also use Drive Setup to deep-wipe the drive, which should also repair the problem. However, this will erase the drive completely. If there's anything on the drive which you do not want to lose, and which has not been backed up someplace, then you may not want to do this.
Using Drive Setup
A comment on using the Software Restore disk -
That CD can be dangerous to use. Its intended purpose is to revert the contents of the hard drive to the state it was in when originally shipped; this is accomplished by its installer using a disk image of the contents of the hard drive as it was when it left the factory. There is a way to use that disk to preserve the existing contents of the drive while also replacing all that was there originally, but it is very easy to accidentally delete the current contents of the drive.
A safer disk to use, one which has all the repair capability of the Restore disk, is to use the Software Install CD. This disk is intended to be used to install or replace just the operating system plus a few other standard utilities, and by default removes nothing. In addition, by user direction it can be used to make incremental replacements or installs of OS and other software groups. A retail OS 9 Install CD of appropriate version (all retail OS 9 Install CDs have a white label with a large gold 9) can also be used with equal safety.

Need help sourcing Lenovo Soleil S620 drivers or restore disk

Hi all,
I have in front of me an ancient tablet PC from Lenovo known as a "Soleil S620". I believe it was an Asian-market only product.
From this webpage (http://www.howah.com.cn/news/en/news_detail.asp?id=50):
"Lenovo Soleil S620 - The world’s first notebook computer with rotatable LCD monitor"
"Soleil S620 is the world’s first notebook computer with an 180o-rotatable 12" TFT-LCD display. The TFT-LCD display has gone through rotation test of over 20,000 times. The product is also the lightest 12" notebook in the market, which is only 17.8mm thick and weighs a mere 1.6kg. Embedded with Intel’s Centrino chip, Soleli S620 is the only notebook of such a light weight that is preinstalled with Bluetooth technology."
It's a cute, lightweight and slow little number, and somewhere along the way someone wiped the drive and installed a non-genuine copy of Windows XP (in Chinese, too). I'd like to return it to its Windows XP Tablet PC Edition roots if possible.
I'm betting a restore disk is going to be hard to come by, so if I have to just reinstall it with a genuine copy of XP without enabling the tablet transformation and touch screen, etc, that's fine, but sourcing the drivers is going to be difficult.
Help? Anyone? Thanks in advance!

sorry but this is the closest thing i can find and sorry for it is written in chinese
http://support1.lenovo.com.cn/lenovo/wsi/Modules/Driverdownload.aspx?SearchType=1&LogicType=1&Machin...
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Data Source to upload plan data for CO_OM_CCA_: CC: Costs and Allocations

Hi Guru's,
We have Data source that which upload Actual data for CCA (0CO_OM_CCA_1 - Cost Centers:cost and allocations). Every time it is full upload before loading the data deletion of previous load request will be done.
One more information required that i have checked in the BW cube for plan data it is available in the info cube for one cost center and rest of the costcenter i don't have the data now the users are requesting to upload the plan data for rest of cost centers.
Now as per the business requirement the users are requesting to upload the plan data in to the same i am not sure whether it will pull the plan data with actuals in to BW cube. Is there any alternate with the same data source or else is there any specific data source for uploading Costs and Allocations plan data
Please suggest me how can i go a head with this requirement.
Thanks in Advance.
Ganni

You can use the same datasource to load plan/budget data to the cube for all the costcenters. And regarding the actuals, you can use 0CO_OM_CCA_9 datasource to load to actuals cube and create a multi on top of both plan and actuals cube for reporting purposes.

I have a Mid 2009 Macbook Pro 13 with no restore disk; it has OS 10.8.4 I believe there is something wrong with the OS due to I can not install flash player to view Youtube videos and the when we plug in a Bose headset the sound out will work sometimes

I bough a used Macbook Pro mid 2009 that came with OS 10.8.9 it didn't have a backup restore disk with S/N W8******66D
When trying to view some youtube videos; a window would pop up saying "it needs adobe flash player is required for video play back get the latest flash player" but after downloading the file and during installation would have errors and will not installed.....tried to reboot and install again.....but still the same.
The othe thing I had noticed is when using a good Bose headset with mic the sound output would noticed the headset and then switch from headset to Internal speekers and headset.....thinking that there might be something wrong with the plug in port of the computer or the headset.....the headset works with no issues on my iPad so there must be something wrong with the computer.....tried to move the plugin around the port but no change....while the headset is plug in can hear a short clicking noise and the sound would get lost and back again......but with nothing plugin to the port there is no issue with the sound or mic.
Thanks for your feed back......it looks like I have two different issues one is a software issue and the outher is a hardware issue
<Edited By Host>

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

HT201272 Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store

Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store? When I try it tells me the pruchases have already been downloaded to this computer.

Does your purchased rmusic appears under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (music can't be re-downloaded in all countries) ? If they do and you don't have the cloud symbol against them so as to re-download them, then do you still have the entries for them in your library i.e. where you would normally click on them to play them ? If you do then try deleting them from there (iTunes will be seeing them and assuming that you still have them somewhere) and they should then get the cloud symbol for re-downloading in the Purchased link.
If you aren't in a country where music can be re-downloaded then you could try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page,

Power Mac G4 no iMovie and no restore disk

I purchased a used Power Mac G4. It is running OS 10.4
The problem is that it does not have iMovie installed. Online help states that I need the restore disk, which I don't have. Is there a way to get it, or is there another alternative?
The other problem is that updating the software requires a password from the former owner. The machine boots to desktop without a password, it's just needed for updating Safari. Is there a way to reset that?
The machine is in other wise fine shape and I'd like to make it useful.
Thanks,
Jay

If you are in the US call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
If you are in another country:
http://support.apple.com/kb/HE57
Have you asked the vendor for the password?
iMovie is part of iLife. You should be able to purchase the relavent version on eBay or Amazon.

I'm installing a new hard drive and wanted to restore it from Time Machine. When I restart w/ "command" /"R" it returns to orig. startup disk.

I'm trying to load a new harddrive using timemachine when I restart the Macpro using "command"/ "R" keys it restarts to orig. startup disk and not to restore option.

If you installed a brand new hard disk, there is no recovery partition. OS X Internet Recovery should enable you to boot with ⌘ R but this does not work on all Macs, just ones with updated firmware that enables this function. Yours may predate that ability.
Read this: from http://support.apple.com/kb/HT4718
Some computers that did not ship with OS X Lion or OS X Mountain Lion installed may have a software update available that allows them to use Lion Internet Recovery.
Therefore, without a recovery partition, your 2008 MBP cannot boot OS X Internet Recovery.
Boot from your original system installation disc, then restore from your Time Machine backup. It will create the recovery partition on your new HD.
Time Machine backup volumes are also bootable, so you should be able to boot from the TM volume using Startup Manager. Connect the TM volume then an Option key while starting the MBP.

I was trying to restore my itouch and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin

i was trying to restore my itouch because it showed on my itouch the itunes bar on top and the charger on bottom so i went on itunes and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin will free up additional space. What do I do?!?!?! please help me ASAP

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

Dv7t-6000 my recovery partition gone and HP wants $50 to mail me a restore disk.

dv7t-6000 my recovery partition gone and HP wants $50 to mail me a restore disk.
Does anyone have a download link for this; it's criminal HP does not offer it to customers free. I already paid for it once when I bought the laptop.
thanks

I see from your screenshot that you have added a partition- and in the process the hard drive was converted from Basic to Dynamic. This always breaks Recovery function..
You will have to delete the extra partition AND convert the hdd back to Basic. Use "Option 1" here:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT1338 My macbook came with snow leopard, if I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second ti

My macbook came with snow leopard, if I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second time ?

At this point, you can no longer download Lion (10.7) from the App Store, only Mountain Lion (10.8) - make sure all your applications are fully compatible if you decide to upgrade.
Yes, you can restore 10.6 using your restore disc should you wish to - and the App Store (not ITunes) will have a record of all your purchases, since it's linked to your AppleId.
Matt

Get new restore disks if Mac shipped with 10.4.x and Leopard upgrade DVD?

Hi,
I am new to the forum and I have searched the topics for quite some time but have not quite found an answer so please forgive any redundancy.
I have a 9 month old MacBook Pro which shipped with a Leopard upgrade disk. I have tried to do a clean install using the 10.4 disk and then the upgrade disk again but I keep getting an error on install saying the disk is corrupted. I think it may have been scratched.
I am wondering if there is a way to get a Leopard restore disk without purchasing a retail Leopard? When I called Apple the lady said she did not know and they would call me back in 48 hrs. I have not heard yet and am wondering if anyone has any experience with this. Thank you very much!

Siriss wrote:
Hi,
Thanks for your response. I have tried repartitioning and zeroing the drive and I ran my TechTools Pro drive checker (which also repairs) to make sure it was not the drive. I am sure it means the disk and not the HD as well. I was hoping not to have to buy Leopard. One would think that if Apple already gave you Leopard once they should be able to give you newer restore disks. Anyway thank you very much for your input. If there are any other ideas I am all ears. Thank you!
Sometimes a copy of a disk is "better" than a scratched or damaged original.
You might copy the install disk. Copying reads and rereads marginal areas on disks and sometimes results in a disk that works when the original does not.
It's worth a try.

PowerBook G$ (titanium) Software Install and Restore disk

My Powerbook G5 (titanium) Software Install and Restore disk will not function as described in the ReadMe document. I want to install OS X from this CD onto my new Iomega 160 Gig Hard Drive. I put the CD into my PowerBook and it comes up fine on the Desktop. However, when I click on the install OS X icon a pop-up appears and says I will have to re-start my computer and another pop-up appears and asks for my administrator password. When I type it in the computer attempts to re-start ( a blue shut-down screen appears) but it never does re-start or shut-down. The blue screen remains but nothing further happens.
Can anyone tell me what I may be doing wrong? Thanks in advance for your help. My email address is: [email protected]
15" titanium powerbook Mac OS X (10.3.9)

Cshepe,
try booting from your OS X CD directly: Leave the CD inside the PB and shut it down. Press the power button and hold down "c" for a while until you see a blue background and the OS X installation program.
Btw, there's no need to reveal your email address, since any (technical) discussion should always be public, so others can chime in or solve their own, similar issues.

What can I do when my ps3 shows the hard disk file system is corrupted and will be restored ?

what can I do when my ps3 shows the hard disk file system is corrupted and will be restored ?
Solved!
Go to Solution.

disconnect and try connecting again. use other cable.

Cost and source of restore disks?

Similar Messages

Maybe you are looking for