Cost capture and analysis of recruitment in E-recruiting module

Hi,
How can we capture cost of recruitment (per requisition, per agency, per org unit, per postion etc.) in e-recruiting? Is there a standard functionality available to do so?
Is there standard functionality to generate offer letters with the Proposed Pay / Salary Components.
Thanks,
Devyash

Hi Devyaesh,
There is no standard functionality available for both the queries in E-rec.
Regards,
Divya

Similar Messages

  • Tool cost capturing and calibration of tool:

    Hi, to capture tool cost, we defined tool as fhmi material type and included in bom. Accordingly it is issued to production (thru alternate unit) and tool cost is collected in production order.  Now we need to do calibration also for that tool. To do calibration we need to define that tool as equipment as standard practice. What we feel that we are duplicating the data by doing that. Please advise is there any method to eliminate data duplication and to work with product costing as well as calibration. Please advise.

    Dear,
    Generally tooling cost will be obsorbed through overhead charges for a cost center. So best way go with overhead cost for PRT. And define it as equipemt PRT.
    Regards,
    R.Brahmankar

  • Capture and analysis of EMG signal

    All,
    Are there any examples of using ELVIS II+ to capture an EMG signal and displaying it on a waveform graph?  A similar example using another DAQ would be helpful.
    Thanks,
    Jack

    Hi jgriffin
    There is a biomedical toolkit that with examples, but keep in mind that you will need to use NI hardware that has the proper signal conditional steps in order to convert the measured signal, if you do not have the hardware that can do this, you might need to add an amplifier and signal conditional section before connecting the signal to the NI hardware.
    NI LabVIEW Biomedical Toolkit
    Regards.
    Esteban R.

  • Hyperion Reporting and Analysis

    Hello Gurus,
    So I installed Hyperion (11.1.2.2) foundation services(all componants), essbase(all componants), planning (all componants. well, it was only one componant), Reporting and Analysis framework (web application, services and common libraries. i installed only these two because hyperion planning depends on them), financial management ADM driver (chosen by default when i want to install hyperion reporting and analysis). i installed them and configured them all togather. I'm using a Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Windows 2008 SP2 32bits.
    Configuration of Reporting and Analysis framework failed, and that caused several problems when i ran the EPM system Diagnosis. this is what i got. Note: I'm gonna list only the errors/warnings in anything other than reporting and Analysis. as for reporting and analysis, i'm gonna list everything. sorry it's so long....
    Hyperion Foundation
    FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
    Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
    Recommended Action: Check that the application is started
    0 seconds
    EPM System Registry
    FAILED REG: Registry Next issues are present:
    LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
    "webAppType" property missed
    "context" property missed
    "port" property missed
    "SSL_Port" property missed
    "isSSL" property missed
    "host" property missed
    "" child missed
    RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S7bc8):
    "applicationId" property missed
    "RA_PRODUCT" parent missed
    RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
    "applicationId" property missed
    "DATABASE_CONN" child missed
    Error: Checker execution failed.
    Recommended Action: Refer to the validation logs for exception details.
    Financial Reporting
    FAILED REG: Datasource Checking if datasource property exists in the registry
    Error: ORA-00942: table or view does not exist
    Recommended Action: Refer to the validation logs for exception details.
    0 seconds
    Reporting and Analysis
    FAILED CFG: Configuration Validating that configuration tasks have been completed
    Error: EPMVLD-01004: The following configuration tasks have not been completed:
    FrameworkServicesConfiguration: Configuration Failed
    Recommended Action: Attempt to configure referenced tasks
    0 seconds
    PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
    0 seconds
    PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
    5 seconds
    PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
    0 seconds
    PASSED REG: Configuration Checking if product has only one product node in registry.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
    Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
    0 seconds
    FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
    Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
    Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
    0 seconds
    FAILED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
    Error: Components not found.
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
    0 seconds
    WARNING RA: Reporting and Analysis Checker execution failed.
    Check if RAF Services are available.
    No RAF Services (Agent Module) components found in Registry.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
    Data file locations are valid.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
    Every Agent Module is associated with some Agent.
    0 seconds
    FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
    Error: Components not found.
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
    0 seconds
    PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
    Found: 1. Hosts for the components: DC-HYPERIONT01.
    0 seconds
    FAILED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
    Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
    0 seconds
    FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
    Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
    Agent Modules and corresponding Agents belong to the same host.
    0 seconds
    WARNING RA: Reporting and Analysis Checker execution failed.
    Check if all required RAF properties exist under the Reporting and Analysis Setup component.
    The Reporting and Analysis Setup component is not found.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
    Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
    0 seconds
    PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
    Data file locations are valid.
    0 seconds
    FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
    Error: Components not found.
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
    0 seconds
    FAILED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
    Error: Components not found.
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
    0 seconds
    PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
    All required files exist.
    0 seconds
    WARNING RA: Reporting and Analysis Checker execution failed.
    Check if Agents are available.
    No Agent components found in Registry.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
    Every Reporting and Analysis Service is associated with some Agent Module.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
    Data file locations are valid.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
    Every Agent is associated with some Agent Module(s).
    0 seconds
    PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
    Found: 1.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Repository data folder exists.
    Data file locations are valid.
    0 seconds
    FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
    Error: An error occurred while running the check.
    Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
    0 seconds
    FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
    Error: An error occurred while running the check.
    Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
    0 seconds
    FAILED WA: Login Check the possibility to login on Web Analysis Server.
    Error: An error occurred while running the check.
    Recommended Action: Ensure that Web Analysis Web Application is configured and started.
    0 seconds
    PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
    0 seconds
    Many Many thanks in advance,
    Zain

    Hello Krishna,
    yes, looks like i didn't have moduke 7 downloaded. however after i did and installed it, i still got the following errors that seemed to do with connectivity to RAFRAMEWORK and it's database. I am going to list errors in all modules, except for Reporting and Analysis, i'm going to post everythign else.
    Hyperion Foundation
    FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
    Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
    Recommended Action: Check that the application is started
    0 seconds
    EPM System Registry
    FAILED REG: Registry Next issues are present:
    LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
    "webAppType" property missed
    "context" property missed
    "port" property missed
    "SSL_Port" property missed
    "isSSL" property missed
    "host" property missed
    "" child missed
    RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
    "applicationId" property missed
    "DATABASE_CONN" child missed
    Error: Checker execution failed.
    Recommended Action: Refer to the validation logs for exception details.
    Financial Reporting
    FAILED REG: Datasource Checking if datasource property exists in the registry
    Error: Datasource property raframeworkDatasource not found.
    Recommended Action: Fix failure manually with epmsys_registry tool.
    0 seconds
    FAILED REG: Datasource Checking if datasource property exists in the registry
    Error: Datasource JNDI property raframeworkDatasourceJNDI not found.
    Recommended Action: Fix failure manually with epmsys_registry tool.
    0 seconds
    Reporting and Analysis
    PASSED CFG: Configuration Validating that configuration tasks have been completed
    0 seconds
    PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
    0 seconds
    PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
    6 seconds
    PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
    0 seconds
    PASSED REG: Configuration Checking if product has only one product node in registry.
    0 seconds
    PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
    Found: 1. Hosts for the components: DC-HYPERIONT01.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
    Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
    0 seconds
    PASSED RA: Reporting and Analysis Check if IR BI Services are available.
    All IR BI Services are available: IRBI_AGENT_MODULE (Agent on dc-hyperiont01).
    0 seconds
    PASSED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
    Found: 37.
    0 seconds
    PASSED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
    Found: 1. Hosts for the components: DC-HYPERIONT01.
    0 seconds
    FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
    Error: There is inconsistency between Registry and V8_SERVICEAGENT for the following items: JF1, SB1, RM1, ES1.
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
    Data file locations are valid.
    1 seconds
    PASSED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
    Found: 6.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Repository data folder exists.
    Data file locations are valid.
    1 seconds
    PASSED RA: Reporting and Analysis Check if IR Job Services are available.
    All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on dc-hyperiont01).
    0 seconds
    PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
    Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
    3 seconds
    PASSED RA: Reporting and Analysis Check if RAF Services are available.
    All RAF Services are available: RAF_AGENT_MODULE (Agent on dc-hyperiont01), RAF_AGENT_MODULE (Agent on dc-hyperiont01).
    0 seconds
    PASSED RA: Reporting and Analysis Check if IR Log Services are available.
    All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on dc-hyperiont01).
    0 seconds
    PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
    All required files exist.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
    Every Reporting and Analysis Service is associated with some Agent Module.
    1 seconds
    PASSED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
    Data in Registry and database are consistent.
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
    Every Agent is associated with some Agent Module(s).
    0 seconds
    PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
    Every Agent Module is associated with some Agent.
    0 seconds
    FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
    Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
    Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
    Data file locations are valid.
    1 seconds
    PASSED RA: Reporting and Analysis Check if IR DAS Services are available.
    All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on dc-hyperiont01).
    0 seconds
    PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
    Data file locations are valid.
    1 seconds
    PASSED RA: Reporting and Analysis Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists.
    Found: 1.
    0 seconds
    FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
    Error: Found: 2, which is more than 1. This indicates some problem.
    Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
    0 seconds
    PASSED RA: Reporting and Analysis Check if all required RAF properties exist under the Reporting and Analysis Setup component.
    All required properties exist.
    0 seconds
    PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
    Found: 1.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
    Agent Modules and corresponding Agents belong to the same host.
    0 seconds
    PASSED RA: Reporting and Analysis Check if Agents are available.
    All Agents are available: Agent on dc-hyperiont01.
    0 seconds
    PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
    11 seconds
    PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
    16 seconds
    FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
    Error: An error occurred while running the check.
    Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
    0 seconds
    FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
    Error: An error occurred while running the check.
    Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
    0 seconds
    FAILED WA: Login Check the possibility to login on Web Analysis Server.
    Error: An error occurred while running the check.
    Recommended Action: Ensure that Web Analysis Web Application is configured and started.
    1 seconds
    PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
    0 seconds
    Many many thanks in advance,
    Zain

  • How to Capture Multiple Cost centres and Business Unit information in a project?

    Dear Experts,
    With the help of UDA functionality in project super responsibility, I have captured Cost centre and Business unit information and this info will be used/reflected in CC and BU segments of all transactions gets recorded against that project.
    Now, our user wish to have multiple cost centres and business units to be tracked in the same one project. How is this feasible? Below example describes my requirement in a summary, please advise.
    An Indirect project is created when a defect on a machine reported from client's customer and all subsequent activities (purchases, travel to customer site to analyse and troubleshoot, purchases for any in-house analysis etc..involves costs spending internally) in resolving that defect/project involves 6 to 7 different departments (Sales, Tech Support, Quality team etc.,who actually work/travel and spend costs against project until defect resolution). And, each of the above departments will have 1 dedicated owner (project owners) to manage that project and each of these 6 or 7 owners owners will have their own cost centres (eg: 2345 - Sales team) against which they wish to see their transactions (travel, purchases during defect resolution) globally.
    So, all I want to know is how can I make one single project to accommodate multiple cost centresand business unit information to be assigned using UDA? Please let me know if I am not clear.
    Regards
    Venkat

    I think you should use the expenditure organization on the transaction itself to derive the CC/BU. Have AA lookups and define AA rules where you look at a Exp Org to BU or Cost Center to derive accounting.

  • EXCISE CAPTURE AND POSTING

    Dear all,
    what are the steps are involved  to activate excise capture and posting at T Code : MIGO.
    Rgs
    mrs

    Hi,
    Before going to capture excise invoice ,you need to configure all the cin configurations .
    here is the cin configuration..
    Check Calculation Procedure
    In this activity, you can check and, if necessary, change existing procedures for tax calculation.
    Standard settings
    Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
    The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
    Note
    In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
    Recommendation
    If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
    Activities
    If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
    Procedure (pricing, output control, acct. det., costing,...)
    Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
    Example
    Procedures are used, for example, in the following applications:
    · Pricing in sales and distribution
    · Applying overhead in Product Costing (costing sheets) and for CO internal orders
    · Calculating accrued costs in Profitability Analysis
    · Output control (printed confirmations, EDI messages, electronic mail)
    · Account determination
    · Calculating taxes on sales/purchases
    · Calculating accruals in Cost Center Accounting
    · Pricing for resource planning
    Definition: condition type
    Controlling (CO)
    A distinction, in overhead calculation, is made between:
    · Base condition types, which determine the object for which the overhead is to be calculated
    · Overhead condition types, which define the percentage overhead to be applied
    In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
    Real Estate Management (RE)
    An exact definition of a condition that specifies the amount paid for a specific service.
    Condition types include:
    · Basic rent
    · Advance payment for operating costs
    · Pest control
    Sales and Distribution (SD)
    A characteristic of a condition.
    For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
    Treasury (TR)
    A characteristic of a condition used to classify financial transactions.
    Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
    Return ->
    Definition: condition_type
    Condition type
    The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
    Access sequence
    With the access sequence you define
    · the condition tables used to access the condition records
    · the sequence of the condition tables
    · which field contents are the criteria for reading the tables
    Assign Country to Calculation Procedure
    In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
    Requirements
    Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
    Activities
    1. Assign a procedure for tax calculation to every country with which your company has business dealings.
    2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
    Check and Change Settings for Tax Processing
    In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
    · Tax type
    Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
    · Nondeductibility of tax amounts
    For this, tax amounts are marked as not deductible.
    · Posting indicator
    Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
    · Tax not relevant to cash discount (Not discount relevant)
    This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
    Standard settings
    Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
    Recommendation
    Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
    Activities
    If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
    Note
    You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
    Internal processing key
    The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
    The processing keys are defined in the system and cannot be changed by the user.
    Definition: posting key
    Financial Accounting (FI)
    A two-digit numerical key that determines the way line items are posted.
    This key determines several factors including the:
    · Account type
    · Type of posting (debit or credit)
    · Layout of entry screens
    Return ->
    Definition: posting_key
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Activities
    Enter each of your excise registrations, specifying a four-character code for each.
    Definition: excise registration
    Financial Accounting (FI)
    An entity in India that is entitled by law to produce any goods liable to excise.
    Each entity is assigned its own excise registration number.
    Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
    Return ->
    Definition: excise registration
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Definition: excise group
    Financial Accounting (FI)
    A unit within an excise registration, in India, which keeps its own set of excise records.
    Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
    Return ->
    Definition: excise group
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    · Define excise series groups based on type of outgoing document
    · Assign series group to excise registration ID
    · If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    · If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    Maintain Postal Addresses
    Use
    In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
    You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
    You can then define a default local excise department for each excise group and a default customs department for each series group.
    Definition: ARE-1 document
    Logistics - General (LO)
    A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
    The form exempts them from paying excise duty when they remove the goods from their premises.
    Return ->
    Definition: ARE-1 document
    Definition: ARE-3 document
    Logistics - General (LO)
    A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
    The ARE-3 states what goods are being removed and which deemed excise license covers it.
    Return ->
    Definition: ARE-3 document
    Maintain Subtransaction Type with Text
    Sub Transaction Type
    Sub transaction type is used for multiple purposes
    Subcontracting:
    It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
    Excise removals
    Sub transaction type is also used for determining the accounts while doing excise removals.
    With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    · If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    · If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Definition: condition-based excise determination
    Logistics - General (LO
    A method that the system uses of determining excise duty in India.
    This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
    When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
    When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
    Return ->
    Definition: condition-based excise determination
    Definition: formula-based excise determination
    Logistics - General (LO)
    A method that the system uses of determining excise duty in India.
    This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
    When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
    When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
    Return ->
    Definition: formula-based excise determination
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    · Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    · Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    · Specify the conditions in the sales order that are used for excise rates.
    · Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    Definition: basic excise duty
    Financial Accounting (FI)
    The main type of excise duty in India.
    It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
    Return ->
    Definition: basic excise duty
    Definition: additional excise duty
    Financial Accounting (FI)
    A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
    Return ->
    Definition: additional excise duty
    Definition: special excise duty
    Financial Accounting (FI)
    A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
    Return ->
    Definition: special excise duty
    Definition: cess
    Financial Accounting (FI)
    In India, a tax on the manufacture of certain products, mostly foodstuffs.
    Return ->
    Definition: cess
    Definition: countervailing duty
    Financial Accounting (FI)
    A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
    Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
    Return ->
    Definition: countervailing duty
    Define Tax Code for Purchasing Documents
    Use
    In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities
    Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
    Sales Tax Code
    The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
    Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
    Procedure
    For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
    Note
    You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
    Definition: tax code
    Financial Accounting (FI)
    A two-digit code that represents the specifications used for calculating and displaying tax.
    Examples of the specifications defined under the tax code are:
    · Tax rate
    · Type of tax (input tax or output tax)
    · Calculation method (percentage included or percentage separate)
    Return ->
    Definition: tax_code
    Definition: tax rate
    Financial Accounting (FI)
    The percentage rate used to calculate the tax amount.
    Return ->
    Definition: tax_rate
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
    Classify Condition Types
    Use
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    · For taxes on purchases, use the condition types contained in the tax procedure.
    · For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    Maintain Chapter IDs
    Use
    In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
    Definition: chapter ID
    Logistics - General (LO)
    The number given to a material in the schedules of materials published by the government of India.
    The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
    Each material in the schedule is assigned its own identification code, called "chapter ID."
    Example
    The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
    Return ->
    Definition: chapter ID
    Assign Users to Material Master Screen Sequence for Excise D
    Use
    In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
    Standard settings
    Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
    Activities
    1. Double-click User Screen Reference.
    2. Assign all users who need to see the excise duty information to the screen reference IN.
    Example
    Name Screen Reference
    MISHRA IN
    Screen Sequence Number
    Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
    Note
    When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
    Dependencies
    You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
    Screen reference depending on the user
    Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
    Definition: user master record
    User and Authorization Management (BC-SEC-USR)
    Record that contains important master data for a user in the SAP System.
    The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
    Return ->
    Definition: user_master_record
    Define Form Types
    Use
    In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
    Example
    · Form type: CT3
    · Form description: Concessional tax form
    · Status: Receive
    Define G/L Accounts for Taxes
    Use
    In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements
    You have set up G/L accounts for each of the processing keys listed below.
    Activities
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    · VS1 (basic excise duty)
    · VS2 (additional excise duty)
    · VS3 (special excise duty)
    · VS5 (sales tax setoff)
    · MWS (central sales tax)
    · MW3 (local sales tax)
    · ESA (service tax)
    · ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    Use
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hold account
    Specify G/L Accounts per Excise Transaction
    Use
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    · Excise group
    · Company code
    · Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    · Defined the G/L accounts
    · Defined the excise groups
    · Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Define Processing Modes Per Transaction
    Use
    In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
    This way, you can tailor the transaction to what your users have to do.
    Standard settings
    The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
    · J1IEX_C
    This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
    · J1IEX_P
    This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
    · J1IEX
    In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
    Activities
    If the standard settings meet your requirements, do not do anything.
    Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
    1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
    2. In this activity, enter data as follows:
    o Tcode: The transaction code that you have just created.
    o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
    o Active: Select this indicator to activate the setting.
    Example
    You might want to create a transaction that only allows users to display excise invoices.
    Define Reference Documents Per Transaction
    Use
    In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
    Activities
    If the standard settings meet your requirements, you do not have to do anything.
    Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
    Definition: excise invoice reference document
    Logistics - General (LO)
    A document, in India, that you refer to when you enter an incoming excise invoice.
    If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
    Example
    In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
    When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
    Return ->
    Definition: excise invoice reference document
    Maintain Rejection Codes
    Use
    In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
    Activities
    For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
    Specify Which Movement Types Involve Excise InvoicesUse
    In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
    The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
    Note
    This option cannot be used for processing goods receipts without purchase orders.
    Maintain Default Excise Groups and Series Groups
    Use
    In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
    Activities
    This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
    In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
    Use
    The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
    The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
    Requirements
    Before you continue with this activity, work through the following activities:
    · Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
    For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
    Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
    Maintain the Program, FORM routine, and the form for the output type.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
    Enter the output device that you use.
    Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
    Maintain Movement Type Groups
    Use
    In this IMG activity, you group movement types together to form movement type groups.
    Definition: movement type
    Inventory Management (MM-IM)
    A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
    The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
    Return ->
    Definition: movement type
    Utilization Determination
    Use
    In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
    You can either:
    · Debit all the excise duty to one account
    · Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
    Example
    If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
    Acct name BED perc.
    RG 23A BED account 50
    RG 23C BED account 50
    Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
    Acct name BED perc. +
    RG 23A BED account X
    RG 23C BED account X
    When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
    Maintain Minimum Balances for Excise Accounts
    Use
    In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
    Activities
    Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
    Specify SAPscript Forms
    Use
    In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
    Standard settings
    Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
    Reg. name Lay. no. Form Tcode/Prog
    RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
    RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
    RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
    RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
    PLA 1 J_2I_PLA J_2IPLA
    RG 23 D 1 J_2I_RG23D J_2IRG23
    RG 1 1 J_2I_RG1 J_2IRRG1
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_3 J_2IRT12
    The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
    Number Ranges
    You can maintain the number ranges for all CIN Number range objects using this transaction
    Activities
    Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
    1. j_1iintnum
    At an Excise group
    1. j_1irg23a1
    2. j_1irg23a2
    3. j_1iRG1
    4. j_1irg23c1
    5. j_1irg23c2
    6. j_1ipla2
    7. j_1iintpr2
    8. j_1irg23d
    9. j_1irg1_t ( material level)
    10. j_1iconpla ( if Consolidated PLA is used )
    At Series group
    1. j_1iexcloc
    2. j_1iexcexp
    3. j_1idepinv
    4. j_1i57Fc ( 57F Challans
    After configuring cinraise the po aganst the material which is lliable to excise.
    in migo enter the po number...select the ok indicator and click check button
    now can observe excise tab in the header
    enter excise invoice no and date.
    now post the goods reciept.
    according to configuration settings in excise tab it gives whether excise inoice is saving when you posting migo .if invoice is only saving
    go to j1iex_p tc and post the excise invoice.
    hope your dubt is clearded.
    regards
    venkat

  • Cost center and profit center hierarchy

    Hi guys: We have a situation where a cost center is a truck that moves from city 1 to city 2 to city 3...the clients whats to track the costs by city (which is another cost center group)... But if i change the hierarchy in the cost center from city 1 to city 2, the cost center doesnt save the change. how can i only make the cost show up in city 2? what is best design for something like this?
    also what about profit centers? What if a profit center is a truck,  and that truck captures revenue and costs, but when it moves from city 1 to city 2, i dont want the history to carry over to city 2...how can i show the postings in city 2 for the new period? whats the best design?
    i know everyone has implemented in several different ways, but any design ideas will be very helpful
    thank you
    Brian

    Hello Brian
    Costing based profitability analysis is better than account based. Since you are using costing based profitability analysis, you have more flexibility. Among other things you need to define PA transfer structure (Tcode KEI1), assessment cycles etc. Since it is vast area and also one need to have full information about your situation, it is not possible to list "to do" things here. Alternatively what I can suggest is to go through the excellent stuff available at
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c48c64a0111d1894c0000e829fbbd/frameset.htm
    About internal orders: you need to create an internal order for this purpose, which will take precedence to cost centre during posting. 
    Hope this helps!
    Ambadas

  • Cost centre and Profit centre in one query - Authorisations not working!

    Hiya,
    I have another problem related to Analysis Authorisations.
    I have created an AA with Cost Centre and Profit centre access restricted to a certain node of a hierarchy (type 1 - this node and below). For example, the User can only run a query at Cost Centres level of Country Belgium - the query works fine. Now, the user wants to drill down by the relevant Profit centres. According to the log, the system checks for Profit centres like * and says the user is not authorised. All this, despite the fact that all Profit centres belong to country Belgium and user has been given access to see these profit centres.
    What do I need to do to enable drilldown by Profit centre? I can't make a "*" access to Profit centre as the user will be able to run other queries at global level, which is not what I can allow.
    Any suggestions?

    Hello,
    I don't know if it is relevant, but I had a similar problem when I had two characteristic each with hierarchy restrictions in one authorization object.
    I "solved" it by separting each characteristic into its own authorization object.
    BR
    Ondrej

  • Capture and post excise duties..?

    hi experts
    Pls guide me with more clear picture in excise duty capture and posting for import PO.
    whether i have to maintain any tax code with excise duties , or i have to maintain zero + nil excise duties in PO.
    and when i have capture and post excise duties.
    From FI part what they will do LIV for delivery cost , whether they capture any excise duties before doing MIGO
    Please giv me the clear picture
    Thanks
    sap-m

    Dear,
    1 ) Create a purchase order for the materials that you want to order using the standard procedure
    Make sure that you observe the following:
    Invoice tab
    Enter a zero-rate tax code
    Deselect GR-based IV
    Conditions tab
    a.     Select the countervailing duty (CVD) condition and choose  .
    b.     In the Rate field, enter the rate of CVD that will be levied on the material when it arrives at customs.
    c.     In the vendor field, enter the vendor master record that you have created for the customs office.
    To do this select the CVD condition which is marked by arrow and then press button   in the conditions tab.
    3) Enter the custom vendor number in the vendor field.
    The vendor ships the goods to you.
    When the goods arrive in India, they go through customs. The customs officers issue a bill of entry for the goods, which is in effect an invoice for the CVD on the goods. Once they have inspected the goods, they send them on to you.
    4) Entering invoices for Bill of Entry
    The goods arrive at your plant, together with the bill of entry. In order to record the bill of entry in the system
    The excise clerk enters a invoice for the bill of entry.
    To enter the invoice for bill of entry follow standard invoice verification procedure but make sure you observe following
    Header Data
    u2022     Basic data tab
    o     In the Amount field, enter the amount of countervailing duty (CVD) stated on the bill of entry in rupees. Also enter the amount of other custom duties if any.
    o     Do not enter any other taxes.
    u2022     Details tab
    o     Assuming you specified in the purchase order that the CVD was to be paid to the customs office, the system shows the customs office as the vendor. If not, enter the customs officeu2019s vendor master record in the Inv. party (Invoicing party) field.
    Line Items
    On the PO reference tab, enter data as follows:
    Enter the number of the purchase order related to this delivery.
    If you only created one purchase order for the goods, enter the purchase order number and select Planned delivery costs.
    If you sent more than one purchase order to the vendor and it sent you all of the ordered materials together in one shipment:
    i.     Choose  .
    ii.     Enter all of the purchase order numbers in the table.
    iii.     Select Planned delivery costs.
    iv.     Select Deliveries and deselect Returns.
    v.     Choose  Adopt.
    5) In both cases, the system displays the line items in the line item overview
    For each line item:
    In the Amount field, enter the amount of CVD on the item (if you have more than one item, you may have to work the amount out manually).
    In the Quantity field, enter the quantity of goods on the invoice.
    Enter a zero-rated tax code.
    Choose  Simulate.
    A dialog box appears with a list of the postings that will be made to Financial Accounting (FI).
    Choose   Post.
    Note down the document number (commercial invoice number)
    Capturing Excise invoice (Bill of Entry)
    Menu path : India Localisation menu (J1ILN)  Procurement  Excise Invoice  Incoming Excise Invoice  Individual Processing  Capture/Display.
    In the top line:
    Select Capture Excise Invoice
    Select Purchase Order.
    Enter the purchase order related to the bill of entry.
    Choose 
    A dialog box appears.
    3.     Enter the number of the invoice that you entered for the bill of entry and choose 
    If you need to enter any other purchase orders, enter the number in the top line as for step 3.
    Note that this time, you do not need to enter the invoice number.
    Enter other data as required.
    Note that the countervailing duty is displayed in the basic excise duty fields.
    Enter the bill of entry number and date in the excise invoice number and Doc date field respectively
    Save the excise invoice. 
    Post goods receipt (MIGO)
    Menu Path: Logistics  Materials Management  Inventory management Goods movement  goods receipt  for purchase order Purchase order no. Known (MIGO)
    Enter the PO number
    Select 
    Select   and then 
    Note down the Goods receipt number
    Post Excise Invoice (Bill of Entry)
    Menu path : India Localisation menu (J1ILN)  Procurement  Excise Invoice  Incoming Excise Invoice  Individual Processing  Change/Display/Post/Cancel.
    Select Post CENVAT and Vendor Excise Invoice
    Enter the number of the excise invoice that you created for the bill of entry.
    Check that the data is correct.
    Choose   Simulate CENVAT
    A dialog box appears with a list of the accounting entries that will be made to transfer the CVD from the clearing account to the excise duty account.
    To close the dialog box, choose  .
    If the data is correct, the signal is   choose Post CENVAT.
    The system posts the CENVAT (CVD Amount) and creates a corresponding entry in Part II or the appropriate excise register.
    this may help u
    Pardeep Malik

  • Calculate and analyse variances for PM orders

    Dear all,
    How the Costs and activity planning can be done for all PM orders and Calculate and analyse variances
    on periodical basis??
    Thanks and regards

    hi
    Activity price is calculated by planning for activity and cost center and when the workcenter relevant is specified in the work order.
    in normal scenario Variance calculation has little scope for plant maintenance
    regards
    thyagarajan

  • Changeover Cost, Time and Materials

    What is the best method for capturing changeover costs in a discreet manufacturing setting where production orders are used? Depending on the sequence of products being produced cleanout times and the quantity of cleaning agent used can vary. This has an impact on planning and profitability, and should be accurately captured. 
    Is it best to create multiple routings one with and on without changeover time?
    Also, to capture the amt. of cleaning agent used, is it best to put that directly on the BOM?  The issue is that we don't know how much cleaning agent is used until after we have already posted production.  Is there a way to go back into the production order after posting production on the finished good and consume more material?

    Hi,
    Create production order without materials in transaction CO07.
    You can use reference operations sets for this. You can assign the components in the order directly. Create reference operation sets and call on the operation in the production order wo material.
    This cost can be captured on a cost center and distributed as per the requirement.
    thanks and regards
    Muru

  • Difference between Cost center and profit center

    I need to know what the difference is between a cost center and a profit center eg. A work center has both a cost center and a profit center. What do they collect for that particular work center.
    Thanks

    hi tefo
    differenc is whatever the cost involved will be collected both to the cost center and profit center, when we settle the order it will be settled in the cost element for cost center. the cost will be reflected in profit center which is assinged to the particular cost center.in profit center you can cpature revenue also which is used to map the profit loss for the concern, where as cost center will only capture the expenses
    regards
    thyagarajan

  • Planned cost for Results Analysis

    Dear Friends,
    SAP reads line items from COSS and COSP to determine the planned cost for result analysis.  What line items does it consider while summing up the planned cost.  I wish to reconcile the planned cost as considered in result analysis.
    I am considering the line items from COSS and COSP where
    Value type = 1 or 11
    Beltyp = 1
    Version = 0
    Business Transaction ????
    What values should I put for business transation ?    Or is there a SAP standard report which matches with the planned cost value of result analysis.
    Standard report S_ALR**** does not always match with the planned cost value in result analysis.  These reports read values from RPSCO table which is a summary table.  
    Regards
    Jayesh.

    After releasing production order all primary and secondary costs get attached to the order.
    You can see planned cost in Tcode:CO02>>>>Goto>>>>>>>Costs>>>Analysis>>>under cost trend layput.
    Yogesh Thorat

  • PA - Costing-Based and Account-Based

    Hi All,
    Please tell me what is Costing based PA and Account-based PA.
    Thanks
    Vinu

    Hi,
    Costing-Based Profitability Analysis
    This type of Profitability Analysis is primarily designed to let you analyze profit quickly for the purpose of sales management. Its main features are, firstly, the use of value fields to group cost and revenue elements, and, secondly, automatic calculation of anticipated or accrual data (valuation). The advantage of this method is that data is always up‑to‑date and therefore provides an effective instrument for controlling sales.
    Account-Based Profitability Analysis
    This type of Profitability Analysis enables you to reconcile cost and financial accounting at any time using accounts. In contrast to costing‑based Profitability Analysis, this type uses cost and revenue elements, which gives you a unified structure for all of accounting.
    The system posts all revenues and costs to both Financial Accounting and Profitability Analysis at the same time and using the same valuation method. This means that the cost of sales is posted to Profitability Analysis at the point of goods issue.
    Regards,
    Eli

  • SPM Auto Load Capture and Use.

    Hi,
    I was reading about Oracle SPM feature, but i have questions in mind for automatic feature..
    * if we have set both capture and use parameter true. Oracle will automatically capture Plans, but will it automatically evolve new plans to accepted or it will wait for evolve it manually before using new plan.
    * If it Automatically evolve, when and how will it?
    * If it Automatically, will change old plan's flag accepted to No? or add one more accepted plan
    regards
    Hitesh

    if we have set both capture and use parameter true. Oracle will automatically capture PlansCorrect.
    but will it automatically evolve new plans to accepted or it will wait for evolve it manually before using new plan.For plans manually loaded into a baseline, these should be loaded as accepted.
    If a plan is loaded automatically and no plan already exists, then the first plan will be created as ACCEPTED=YES.
    Otherwise, if the plans are loaded automatically, then they will not be accepted until performance has been verified by the evolution process.
    If it Automatically evolve, when and how will it?If the task is enabled, the SQL Tuning Advisor auto task will deal with the automatic evolution.
    If it Automatically, will change old plan's flag accepted to No? or add one more accepted planThe accepted flag of the previous plan should not be set to NO, there should be multiple accepted plans.
    It might be worth taking a step back and looking at the big picture with automatic baseline capture on.
    - If you have a SQL statement for which there is not an accepted baseline, on parse the optimizer does its usual optimizer business and the generated plan is stored in a baseline as ACCEPTED=YES.
    - If you have a SQL statement for which there is already an accepted baseline, on parse the optimizer does its usual optimizer business.
    - If the plan it comes up with by default matches one of the baselines, great.
    - If the plan doesn't match one of the baselines then it will store the generated plan in the baseline to wait for evolution.
    - The optimizer will then use the outline hints in the baseline to generate the particular plan - to do this it has to match the plan_hash_2 value to the underlying plan id in sys.sqlobj$/sqlobj$data/sqlobj$auxdata.
    - If the optimizer can generate the plan, great.
    - If the optimizer cannot generate the baselined plan, then it will revert to the generated plan and mark the relevant plan as reproduced=NO.
    - What if there are multiple accepted plans? It will attempt to reproduce the plans in order of lowest cost baselined plans first.

Maybe you are looking for