Cost center assignment to Position not updated in IT0001 Org Assignment

Hello,
I have assigned Cost centers to all Positions (A011) in IT1001 through PP01 from 01/01/2011.
Now when I see IT0001 in PA30, most of the employees have the updated IT0001 with cost center from 01/01/2011. But few employees have multiple IT0001 records past 01/01/2011.
e.g. there are 2 records for  IT0001 for particular employee.
1. from 02/01/2011 - 12/31/9999
2. from 01/01/2011 - 01/31/2011
For these employees, cost center is not updated in IT0001 Org Assignment. I tried running RHINT00 and RHINT30 reports but didn't help.
Please guide, which report tp run to solve this issue.
Thanks in advance.
Madhu

Mr.Fun,
for these employee rerun the action with the same date.
and chek.
some of the table entries are not projected perfectly.
If you rerun the action it will fills that if not the check the cost center assignment to the position done perfectly r not.
it is advised to assign cost center to the Org.Unit. instead of no. of positions.
system automatically considers for all the positions in that org.unit.

Similar Messages

  • Fund center and commitment item not updated

    Hi!
    We are using Funds Management together with SRM. When we change the value of e.g. cost center and not the account assignment itself we do not get an update on fund center. When changing account we do not get an update on commitment item either. This is standard SAP and we have been asked to use BBP_DOC_CHANGE_BADI. Have anyone else had this problem?
    I would really appreciate if anyone have some code for this BADI or any other badi e.g. BBP_ECS_PO_OUT_BADI. It is only important that changes in PO when replicated to back end results in the correct update of commitment item and fund center.
    Sincerely
    Andres

    Solved through BBP_DOC_CHANGE_BADI

  • Cost Center & GL Account search not working.

    Hello all,
    I am having the following problem while creating a shopping cart, at the Cost Assignment (item level). When I click on the binoculars for searching CC or GL Accounts, i get the following message: "Display not possible (inconsistency in the input help)".
    Now, I've researched and tried every possible suggestion:
    1. Make sure the requester has permissions BBP_FUNCT/value: BE_F4_HELP, and S_RFC/value:*   (SU01), among many others.
    2. I have assigned to the requester the respective roles in the organizational structure.
    3. Changed the RFC user (from SRM to R/3) from type "communications" to dialog. This user has SAP_ALL in the backend system.
    I have run out of ideas of what might be the problem. I've searched through the forums and used all of the ideas mentioned above, but the problem is still there.
    Any help will be greatly appreciated.
    Regards,

    Hi
    Which SRM version are you using ?
    Please refer to the following SAP OSS Notes.
    <u>Note 656633 - Search help requires dialog users
    Note 746788 - Back-end system search help for cost center
    Note 673390 - Incorrect destination determined for search help
    Note 550052 - EBP 4.0: Preparation for back-end input help in EBP</u>
    Hope this will help. Do let me know.
    Regards
    - Atul

  • Game center bugs, lockups and not updating friend details

    With the new ios7 game center I have found a couple of issues.
    Firstly, it does not seem to update the name of my friends when they chnage theirs. It keeps showing their old name. Why is it not updating the credentials?
    Even more seriously, there are 2 ways of getting the application stuck, at least on the ipad. The iphone seems not to suffer from the automatic jumping described below.
    At the bottom, select the "Friends" tab. Select the "Points" view, which includes yourself (Me) in the list of friends,
    Select yourself (Me) in that list, and you'll notice the app will jump back to the first tab "Me".
    Try to move back to the Friends tab, it will immedeately jump back to the "Me" tab. You'll have to kill the app to see your friends again.
    Similar method, but worse: At the bottom, select the "Friends" tab. Select the "Points" view, which includes yourself (Me) in the list of friends,
    Don't select anyone yet but move to the "Games" tab and then back to the "Friends" tab. This will autoselect the player "Me" and you'll notice the tab also jumps to "Me" but the "Friends" tab view stays, and actually the whole app is now stuck.

    4.1 launches this week, it addresses the 3G slowness.
    http://news.softpedia.com/news/Confirmed-iOS-4-1-Resolves-Slow-iPhone-3G-Perform ance-Out-September-8-155069.shtml

  • Position is not updating in IT0001 : HCM Forms & Process

    Hi Experts,
    I am doing the TRANSFER  Process(Standard process ORG_CHANGE)  . My workflow is completeing successfully without any error.But the new position is not getting updated in IT0001.
    Does anybody know why this is happening?
    Thanks & regards,

    Hi Mukesh,
    Thanks for the response.
    Can you tell me the IMG path where I need to check if the position field is editable? When we use PA40, position is anyways editable.
    We are using an Adobe Interactive Form in the case of our portal based HCM P&F Transfer process.
    The workflow works fine but the change in position is not getting reflected in IT0001. Do we need to do something to ensure this happens? The position field has been mapped to IT0001-PLANS.
    Regards,
    Teja

  • All line items on a Cost Center Are archived, do not see in custom reports - error No actual line items were selected

    Hello, experts !
    Please advise,
    I have a cost center,
    on witch I know there are bookings,
    1. I do KSB1, have message "No actual line items were selected"
    2. I select - extras - data source - archive
    in this way I can see my items.
    ok.
    maybe all bookings are archived.
    no:
    I de a new movement on this CC - KB11N (exemple) - and on the new one I have the same problem
    I se it only when I check "archive",
    and do not see it on custom reports.
    Why ?
    Ay idea ?

    Dear Jonny,
    Check the T Code: S_ALR_87013611
    Then T Code: KSB1 by removing all the filters like date restriction..etc.
    Still if you are not finding the postings:
    Check the postings in the T code FAGLB03 - Display Balances by giving GL Account.
    Postings happen in co module if there is a cost object.
    If there is no cost object it will not flow to controlling, that will be in FI.
    What you need to do is:
    Select your GL
    Select your Payment date
    Select your Document number.
    You can check the same in FBL3N also.
    go to the transaction summary and verify the cost object whether it is a cost center or Order...etc.
    Also check whether the payment is in parking stage ....?
    Regards,
    Pavan Kumar Arvapally

  • Vertical slider position not updated while displaying .pdfs with Adobe Reader X

    When a .pdf file is opened inside Firefox 4 (beta/RC1), the vertical slider position does not update while scrolling through the document until the mouse cursor is moved to the slider bar (then the slider immediately jumps to the right place).
    I am using Adobe Reader X.

    Here is a URL that will not save in Reader X:
    http://samplepdf.com/sample.pdf?meaningless=1234567890123456789012345678901234567890123456 789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456 789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456 7890/&blah=blah.pdf
    However, if the last slash is removed or encoded as %2f (which should not be necessary, as it appears in the query portion of the URL), there is no problem.

  • Cost of good sold  account not updated

    Hi all,
    Could you please advise me on the below issue
    Through sales process billing was completed on fin year 2007.
    In the material master standard price maintained u201C 0u201D because of this reason cost of good sold  account did not updated in FI.
    But the billing document was generated as per billing conditions.
    Physically the inventory has been reduced from the warehouse stock and valued appropriately.
    The financial year already closed, please advise how should rectify this.
    KSR

    Hi all,
    Please advise how to coreect this in finacial year 2008.
    KSR

  • Cost center SKH/SK0305PO05 does not exist on 29.02.2012. Message no. KI222

    dear Experts,
    I am making Gr means Release Gr blocked stock for subcontracting po,i geting the error,
    ,but the cost center i created is in other controlling area,the same cost center i can
    not create now,please suggest me.why this message is coming?  can i change cost center
    here.
    Regards,
    Varun

    HI,
    check following sap note
    SAP Note 16653 - How is the validity of the cost center checked
    and take the help of your CO and FI consultant for same
    check following link also
    [http://forums.sdn.sap.com/thread.jspa?threadID=1930191]
    Regards
    Kailas Ugale
    Edited by: kailasugale on Feb 29, 2012 9:35 AM

  • Cash Position Not Updated for Business Area

    Hello Experts,
    The Electronic Bank Statement and the Cash Position has been configured. Also the Configuration setting for Business Area account assignments is duly made in the Cash Management.
    The Cash Position Report in FF7A shows correct values when executed for the Company Code only. Also when executed for Business Area it shows correct values till Electronic Bank Statement file is uploaded. Once the upload happens the Planning Level F0 is not getting any values for Business Area and hence the Cash Position is showing incorrect values.
    The requirement is to have the cash position Business Area Wise.
    For this requirement, the field status for the Business Area has been maintained as required.
    When the amount is paid to the vendor, the Business Area is getting captured and reflected in FF7A Cash Position as well correctly.
    However, when the bank statement file is uploaded through FF_5, the BA is getting captured only for the outgoing clearing account (Planning Level B1) but not to the main bank account (Planning Level F0) thereby the cash position is not getting updated with correct values.
    The Document splitting is not active for the Company Code.
    Need help to identify the reason as to why the business Area is not getting captured for the Main Bank Account upon clearing from the Outgoing Bank Account during EBS
    Thanksu2026.
    Best Regards,
    Vas

    Hi
    Business area updations will not get updated through automatic postings like tax line generations, etc.  You will have to search for some note for updations.  Otherwise while preparing blance sheets for business area, you can make adjustment postings.
    Regards,

  • The Creator of an Assigned Tasks is not Updated when Changed from Mobile Device

    We have a Shared Mailbox where we create Tasks and assign them to the appropriate engineer. In Outlook, if they open and modify the assigned task, after they have accepted it of course, and then save it, a message is received in the Shared Mailbox with the
    update. When that is opened and closed, the task on the Shared Mailbox is updated.
    However, if that Task is updated on a mobile device, WP8.1 in this case, the creator does not get a new message with the changes.  If the assigned user looks at it in Outlook, he/she will see the changes.  But the originator never receives a message
    with the changes.
    Am I missing something or is this by design?  Thank you in advance for any assistance.

    Anyone?

  • 'My position' not updating

    I've just upgraded my n86 firmware to 30.009 and now 'My position' in Maps doesn't update as I move. When I first start up maps it picks up the correct position, then never updates. If I EXIT maps and reenter it it does update, so seems like the GPS is working OK.
    Any Ideas ????

    I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

  • Assigning the cost center directly to the person

    Dear friends
    We have to assign the cost center to position, and when the position is assigned to a person, he inherits the cost center from the position
    But the requirement is to assign the cost center directly to the person, with out assigning to the position, can you suggest any alternate to do this
    Regards
    Kiran

    Hello
    Maintain infotype 0027 from pa30 for the personnel number directly....
    cheers

  • Plant maintenance order settlement to cost center

    Hi,
    I have a requirement from the client that PM order costs should be settled to Cost center (real) and credit the order line with statistical cost center.
    1. Consumables GL is debited at the time of goods issue with refrence to PM order , cost center is not updating in this line item
    2. Settlement rule maintained as cost center receiver which is mentioned in the PM order and after settlement consumables GL is getting credited with Order and debit to cost center mentioned in settlement rule , statistical cost center is not updating in credit line
    My client requirement is
    Statistical cost center should update along with Maintenance order at the time of goods issue for consumables GL (Debit)
    Statistical cost center should update along with maintenance order at the time of settlement for PM order (Consumables GL credit with statistical cost center and maintenance order and the same GL debit with settlement receiver cost center (real)).
    If i provide cost center in account assignment at the time of Goods issue , system is updating the cost center along with order , however at the time of settlement both cost center and order are not updating in credt line item and the cost is lying in the order without settling.
    Please advise any configuration setting or user exit to meet the above requirement.
    Thanks,
    Sreedhar

    Hi Ravi,
    Thanks for the update.
    If i give the cost center in acct assignment in MB1A it is taking , is there is any option to default the cost center either from PM order or thru some other setting.
    I have tried both substitution and OKB9 , however system is not defaulting the cost center from this settings.
    Please let me know if there is any other option to default the cost center in MB1A.
    Thanks,
    Sreedhar P

  • How to assign a cost center to a person without Position?

    Dear Experts,
    OM and PA is integrated.
    When I hire an employee to position 99999999, the cost center field in infotype 0001 is an output field, can't be manually maintained.
    I wanna assign an cost center to this employee in infotype 0001, not 0027 or 0315 or else, what to do?
    Is it configurable?
    Thanks!

    Is there some misunderstanding here?  The position 99999999 is normally the default position that a person gets when he is not integrated (eg. he leaves the company).  Normally you can maintain KOSTL when a person gets this position - even with integration switched on.  This is because the default position does not have a corresponding position in OM.
    You should never give a person this position upon hiring.  Then you should assign a real position, and the KOSTL will be transferred from the Cost Center of that position in OM. (Again presuming integration is switched on).
    Kirsten

Maybe you are looking for