Cost center commitments reconcilation issue

Hi,
i have Cost Center Commitments Reconcilation issue.. one cost element values are not updating to BW from R/3 this is the issue we have .. RSA3 showing 0 Amount for that cost element.. i have tried to load upto PSA here also i am getting 0 values.. i have checked in table "COOI" i found the values for that cost element.. and also i have checked in ksb1 it is also showing the values... cost center commitments data source 0CO_OM_CCA_10 has no customer exist... could any one have any idea on this... what may cause the issue.....
Thanks & Regards
Sreekanth

Hi,
As per below the extractor is working fine. KSB1 displays the Actual Linte items and KSB2 displays the Commitments Line items. So the commitments extractor is working fine if the data matches with KSB2.
DataSource 0CO_OM_CCA_9 will give you the actual costs and matches with KSB1
Thanks,
Nagarjuna.
Edited by: Nagarjuna Reddy on Oct 20, 2011 9:07 AM

Similar Messages

Input cost center in Goods Issue

Can I input the cost center in Goods Issue or Goods Receipt transaction? I cannot find the cost center field in the forms setting?
Many thanks for the kind advice in advance?

Vijay Kumar,
Our version is 2005. According to Julie Jamieson's advice, in version 2007, thie field "Distr. Rule" = "Cost Center". Is it really impossible for version 2005 to input the cost center in Goods Issue or Goods Receipt? Your kind advice will be highly appreciated.
Ada

Validation for Cost center for Goods issue against the cost centers

Dear Friends
In my client place we have 6 plants are defined and profit centers are defined for each plant. Hence here each plant is one profit center. Cost centers are defined plant wise.
The requirement is when the goods issued to cost center system should check the cost center is defined against the plant. ( i.e., Cost center def against the Profit Center, and Profit center equal to Plant).
Is there any provision to assign the plant to profit center or vice versa?
Please guide me how to resolve the issue.
Thanks in advance.

Hi
Please check EC01. May be it can help you. But in my view it is not possible.

How to Default Cost Center During Goods Issue (tcode: MB1A) To Prod Order

Dear Experts,
How to default the Cost Center/ Profit Center during goods movement posting?
Currently, for Goods Issue transaction, the cost center show blank. Even i have default C.Center in cost element (OKB9)
Where to link Cost center/ Profit Center to MM module?
Need your help.
Thanks,
Kiran D

a. If you want to default a cost center to the transaction then use substitution. Give the default profit center in the cost center. so profit center will also get defaulted.
b. if you want to default the GL account then configure it in OBYC, then use OKB9 to give the default cost center and profit center.
anantha

Cost center data uploading issue in OKENN transaction

Hi Gurus,
I have uploaded cost center data using LSMW IDOC method. the data uploaded in the CSKS table successfully. after that i have checked for the cost centers in OKENN transaction at standard hierarchy level. but there cost center are not exist under hierarchy level. then i have changed the hierarchy data(KHINR)(for example From SUS2021100 to SUS2021200, ihave changed in KS02.... then the cost displyed under SUS2021200.... again i have changed the hierarchy from SUS2021200 to SUS2021100.... then the cost center displyed under SUS2021100..... But actualy when i have loaded the data using LSMW all the loaded.... but the cost center not displyed under hierarchy.... after manualy chnged the hierarchy data at KS02 transaction.... it is displying.... idon't understand what is the problem.... can anybody solve my issue.... thanks in advance

Hi Gurus,
I am facing the same issue while uploading cost centers through COSMAS01 basic type.
Cost centers are created properly, we can display them with KS02. Every data are loaded correctly, even the standard hierarchy. Into table CSKS, field KHINR for standard hierarchy is populated, nevertheless, we do not find the cost center into the OKEON Tcode.
How could I solve the issue I am facing ?
Thx for your help.
Regards,
Aurelien

Cost Center wise goods issue report

Hi,
Is there any standard report to see the stock of materials based on cost center. I tried MB51 & also put costcenter field in that report. But when i am running the report it is not showing against cost centers. It is showing against mov type 201 . When i select 201 & go to details than only i can see the cost center. Is it possible to see the cost center without selecting 201 & going to details. I mean to get the report only based on cost center & the stock.
Thanks
John

Hi
When you selected the cost center, it may be appearing in the column of "Hidden fields". So once you select it, by clicking on the appropriate arrow, you will bring this field into the other column where all the fileds which are appearing will come as display values in the report. Then you will click on the copy.
Now while you are in display mode of report, go to "settings" ---> Layout -
> save -
> give a name for your variant and then save.
This way this variant will be available for you next time to run. If you have administrative rights, you can save this variant available for all users or else you can save this for your user specific.

Cost Center Date format Issue.

Hi,
All Experts.
I am facing one problem for Cost Center creation date.
I am working for US and Canada company code. controlling area is having 30 Group Currency. CO area is completely configured and working fine.
At the time of cost center creation when I am giving period interval 09.10.1900 to 12.31.9999 MM - DD - YYYY format.
But it is giving error as
Invalid date Message no. 00064
All Company Codes are perfect and having country US so, as I understand date format is taken from countries defined in SAP General Settings & countries for CRM and etc..
Where my configuration went wrong ?
I am wondering in Controlling Area for any settings for Date format but fail...
Does any one having idea for this ?
Expert guidance will be really really great on this.
I questioned that has SAP given a US date format for controlling or not ?
Like for Cost Center & Cost Element ... etc.
Regards,
Sharvari.
Don't cross-post: especially, not under different users

Hi
Please check the settings in OY01.
As per it, you must either use MM/DD/YYYY or MM-DD-YYYY and not MM.DD.YYYY.
Also check the "Defaults" in the user settings (T.code SU3).
Regards

Cost Center Master Data Issue for Hierarchy

Hi,
We are building a hierarchy on Cost Center and realized that the way Master data on Cost Center is stored in SPM it's getting concatenated with Controlling Area. So CC 1234 becomes 1234_010 where 010 is a controlling area.
While we understand a need to make CC unique across several controlling area, it's impacting Hierarchy. In Hierarchy we only upload CC and not CA.
Do you recommend to do concatenation of CC & CA for Hierarchy as well so that it matches with Master? Or is there any other recommended way to go ?
Regards

Hi Rohit,
That was helpful. We will certainly take concatenation route.
However in Invoice Extract File we do get CC & CA separately in XARCOCTR & XSACOARR fields respectively.
When you say that this is concatenated even on Transaction Data are you talking about data AFTER it is loaded into SPM ? Also when data is sent out to DSE will it have CC & CA concatenated ?
Regards,

Where do I define the automatic posting of goods issue to Cost Center?

Dear Experts,
I found out that all the raw material consumed each time I do the confirmation of process order via CORK did not post to Cost Center.
Where do I define the automatic posting to Cost Center for Goods issue for consumption?
regards,
Abraham

Hi,
I found out the default movement type has been predefined to 261 (GI for Order, in which it doesn't post to Cost Center). I guess the standard system has a valid reason to set it as 261 instead of 201 (GI for cost center).
As far as I understand, the Process order will accumulate all the costs (direct cost - material, labour and machine hour and also indirect cost) during the confirmation (material is backflushed and fnished goods is auto-GR). And at the end of the period, this process order will be settled its variance if there is (between the total cost credited - based on standard cost of the finished goods and actual total accumulated costs debited).
So, my question is, by right should there be any CO posting being made to Cost Center for material consumption in the above process flow as I checked in the standard system, the material movement for raw material and finished goods have no Cost Center posting at all?
regards,
Abraham

Profit Center Mandatory in Cost Center Master

Hi Expert!
I would like to know the configuration path to make the option Profit Center Mandatory in cost center master data.
Thanks
J

If you have activated profit center accounting and if you leave profit center blank in the cost center master, system issues a warning message at the time of saving. You can convert this message to error to make profit center mandatory.
The message number is KS096. It can be configured in transaction code OBA5. Choose application area KS. Insert message 096 and select the desired message type (E for error or W for warning).
Regards
Rakesh Pawaskar

Profit Center mandatory for Cost Center

Hi,
How do we make the profit center field in the cost center master data as optional instead of required.
Thanks,
Venkat

If you have activated profit center accounting and if you leave profit center blank in the cost center master, system issues a warning message at the time of saving. You can convert this message to error to make profit center mandatory.
Regards
Rakesh Pawaskar

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

Error KI222 - Cost Center Not Valid for Date

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

are you sure that the posting and document dates you submit with the BAPI are correct?

Cost Center information

Hi Experts,
I need to create a report using cost center information, my issue is how can i get the value of the cost center. To sum up, i need all the postings to the cost center to sum the amount for FI reclasification.
Regards.

Hi
You will get the posted values of the cost center from the below mentioned report
S_ALR_87013611 - Cost Centers: Actual/Plan/Variance
Regards
Praveen P C

While checking any options in account assinment SRM the cost center disapp

Dear experts,
Kindly help me in my issue. TIn the SRM portal ( SC ), while ordering for free text uner cost assignment - there is a section called account assignment overview - there is a drop down list which indicates whether it's a taxable or tax exemt ect and for everu assignment there will be a cost center assigned.
the issue I'm facing is the cost center is assigned once the free text catalog is created but if any other option in the list for the assignment is changed the cost center disappears. So How can assign the correct cost center every time even if change the assignment option.
This request was made to cut down the work of the user to select the cost center from the list in the back end.
Kindly reply with an answer.
Thanks
Ramya Sekar

hi,
Which SRM version are you working on?
Pls see if the foll notes help:
Note 1026181 - Account assignment detail screen value disappears
Note 1022640 - Selected value of accounting fields disappear
BR,
Disha.
Do reward points for useful answers.

Cost center commitments reconcilation issue

Similar Messages

Maybe you are looking for