Cost Center Creation - Manual/LSMW

Hi Experts .....
We are trying to create the cost center data using the tcode PP02, in infotype 1001, subtype A 011. when the record is manually created, relevant cost centers are displayed in infotype 0001 (Organizational Assignment). But the same transaction, when run by an LSMW, infotype 0001 is not updated. However, in PO13, cost center relationship is created in both the cases.
It would be great if some one can suggest the solution for uploading the cost centers for bulk data.

Hi Kumar,
Definitly it should work.
Suppose if you are changing the CC for a position first it should delimit the dates and then is should add new CC to that posiiton.
check the LSMW agian whether it is correct or not.
OR, try to create the CC through PPOS_OLD and slece the position GOTO Account assignment.
then Select the position GOTO master CC and give the CC which you want to use with dates. which intun updates the PP02 -- Position, CC relationship also. if you want you can check.
let me know if you have probelm again.
Reward me if helps,
thanks,
Vasu.

Similar Messages

  • Cost center updating thorugh LSMW

    Dear All,
    I have uploaded cost centers ( changed new costcenters) thorugh LSMW. I hv created recording using T-Code PP01 and select relationship according to the BEGDA and ENDDA and i choiced the relation ship ID A011 costcenter Assignment and i did all the procces and uploaded.
    according my recording all the costcenters are uploading in the relationship history ( newly uploaded through LSMW cost center also available . but in infotype 0001 it not reflecting.i dont know why.
    please if anybody can help me how to upload costcenter through LSMW.
    PLOGI ORGA switched on
    regards.
    dinesh.

    Hi, I have the same problem that you, if you do ir directly from PP02 you can see the cost center assigned to the person in the infotype 0001, but if you do it with a batch inputo or call transaction, the relationship betweeen the position or unit org, and cost center is created, but you can not see the cost center in the infotype 0001 of the person.
    I'm still looking for an answer becasuse I want to do a massive charge, and I did a record of PP02 in SM35.
    I have a program and do it correctly using the Function module 'RH_INSERT_INFTY_1001_EXT'
    If you do it with an LSMW or record one SM35 of PP02 it doesnt works,
    But if you make a program and create the relationship with CALL FUNCTION 'RH_INSERT_INFTY_1001_EXT'
    IT WORKS, YOU CAN SEE THE COST CENTER IN IT0001.
    FINALLY I WILL DO IT WITH THIS FUNCTION MODULE BECAUSE I DONT SEE ONE ANSWER OF OUR PROBLEM.
    ONE EXAMPLE OF THE PROGRAM.....
       CLEAR it_p1001.
              wa_p1001-infty = '1001'.
              wa_p1001-istat = '1'.
              wa_p1001-otype = dc_otype. "O
              wa_p1001-plvar = dc_plvar.
              wa_p1001-begda = d_fecha_k.
              wa_p1001-endda = it_cod_ceco-endda.
             wa_p1001-endda = dc_fec_fin.
    *       Preparamos los registros para ser insertados
              wa_p1001-aedtm = sy-datum.
              wa_p1001-uname = sy-uname.
              wa_p1001-varyf(2) = "K"
              wa_p1001-varyf+2(8) = it_cod_ceco-ceco(8).
              wa_p1001-objid = wa_p1000-objid.
              wa_p1001-relat = '011'.
              wa_p1001-rsign = 'A'.
              CONCATENATE it_cod_ceco-ceco 'COCT' INTO  d_sobid.
              wa_p1001-sobid = d_sobid.
              wa_p1001-sclas = dc_otype2. "K
              APPEND wa_p1001 TO it_p1001.
              CLEAR wa_p1001.
              DATA d_fcode TYPE hrrhap-fcode.
              d_fcode = 'INSE'.
              CALL FUNCTION 'RH_INSERT_INFTY_1001_EXT'
                EXPORTING
                  fcode                   = d_fcode"'INSE'
                  vtask                   = 'D'
                  authy                   = space
                TABLES
                  innnn                   = it_p1001
                EXCEPTIONS
                  no_authorization        = 1
                  error_during_insert     = 2
                  relation_not_reversible = 3
                  corr_exit               = 4
                  begda_greater_endda     = 5
                  OTHERS                  = 6.

  • Cost center creation in Batch

    Hi All,
    I need to create lot of cost centers. Is there any way to create them in batch. If there is a way, please let me know step by step procedure for the same. Thanks in advance.
    Regaards,
    S.Sumana

    Hello,
    There is no readymade document for cost center.
    The logic is one and the same. You need to complete the following steps:
    Please take help from ABAPer.
    In recording you have to complete the following steps:
    Maintain Object Attributes
    Maintain Source Structures
    Maintain Source Fields
    Maintain Structure Relations
    Maintain Field Mapping and Conversion Rules
    Maintain Fixed Values, Translations, User-Defined Routines
    Specify Files
    Assign Files
    Read Data
    Display Read Data
    Convert Data
    Display Converted Data
    Create Batch Input Session
    Run Batch Input Session (Takes you to SM35)
    Please let me know if you need any further help.
    Regards,
    Ravi

  • Reg:Cost Center Creation?

    Hi all,
       I would like to capture the expenses incurred by vendor while transporting goods from plant location to customer location in one cost center.
    will any please let me know-
    what are all the config I have to do?
    plz starting from the Create Costcenter step by step?
    *points will be rewarded

    hi
    for Cost center seetings
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COALE/COALE_ALE_060.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COOMCCA/COOMCCA.pdf
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/13/05b3ae635611d2b43b006094b9c9b4/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/08/51457e43b511d182b30000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/bc783643c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/13/248f38c521853ae10000009b38f8cf/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/25/908fc66d8411d194f000a0c93031df/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/af/3f89c89e6711d395da00a0c929f4c9/frameset.htm

  • Sending mails when save button clicked on KS01 - Cost Center creation

    I Want to send a email to my officials when i entered the data and  click a saved button in KS01 after or before creating Cost Center..

    Hi Ravi,
    The package for ks01 is KBAS.
    In this u have exit COOMKS02 before saving.
    So write logic to send mail in the function module of this user exit which is triggered before saving.
    Regards,
    Vineesh.

  • COST CENTER CREATION

    CAN ANYONE TELL ME HOW TO CREATE A COST CENTER?

    Dear Raghu Shankar,
    Use T code KS01 for creating Cost center,Enter the cost center name,Controlling Area,valid From & To date and the Cost center
    category,Profit Center & save the data.
    Regards
    Mangalraj.S

  • Cost center creation prefix with 0000000(zeros)

    Hi All
    Is there any way to creat cost center prefix with 0000(Zeros).I have created cost center called 0000012345 and when i saved this data 0000 were discapperd.Is there any way to create cost center with prefix Zeros(0000000)

    Hi Praneeth
    Thanks for your reply, i agree with you, but once i have done with above step which is explained from your screen, and i pressed enter,by defeault 0000 got disappered.Please see below screens
    Screen 1:
    Scree 2

  • SD data in cost center creation.

    Hi Gurus,
    I have got a request to create a cost center wherein the user has mentioned to create the SD data also. For which he has mentioned the Business Unit code.
    I need to understand what is created in this process and how. I have fair understanding that this is done to book all the costs of a particular BU to the new cost center created. But do not know the process of it.
    Please explain.
    Thanks,
    Tushar

    Hi,
    Cost centre's properties (fields) are fixed and cannot be changed/added. Please, specify your request...
    Regards,
    Eli

  • LSMW Cost Center creation using BAPI BUS0012

    Hi
    I am creating a LSMW using BAPI BUS0012, I have done the setting for inbound Idoc Processing, but when i am clicking on maintain structure relations, i am getting an error No Target structure could be
    found
    please let me know what to do ?
    thanks in advance
    Lokesh

    Hi
    YOu can check http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm
    Here you may get a answer to your question.
    Cheers,
    Hakim

  • Authorization based on cost center for manual actual postings

    Hello,
    We tried to use customer function (COCCA001)/EXIT_SAPLKBER_001 for actual postings (as this is not feasible in standard with PFCG).
    Unfortunately, this exit seems not to be working for actuals postings (kb11n, kb15n, KB21n).
    I found in SPRO those exit EXIT_SAPMKAL1_001 and EXIT_SAPMKGA2_001 for periodic reposting and allocation or EXIT_SAPLKBER_002 for organizational authorization (not used for our project).
    Do you have any clue about how to handle this requirement?
    Regards,
    François

    Give a try in similar lines (CO Validation) as mentioned in the below link and check the transaction codes:
    https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
    Regards
    Sreenivas

  • LSMW - Cost Center Upload

    Hi Gurus,
    Any idea on what BAPI should we use on uploading Cost Center using LSMW? Currently we are using a BAPI with the following characteristics:
    Business Object    BUS0012      Cost Center
    Method                   CREATEMULTIPLE
    Message Type       COSTCENTER_CREATEMULTIPLE
    Basic Type             COSTCENTER_CREATEMULTIPLE
    Unfortunately on step  4 - Maintain Structure Relations, we are encountering an error "No target structures could be found" upon executing it. It seems that the selected bapi has no export parameter/structure.
    Any suggestions for the approach should we use?
    Thanks and Regards,
    Jay

    Hi,
    Check the below links.
    LSMW Cost Center creation using BAPI BUS0012
    http://wiki.sdn.sap.com/wiki/display/ABAP/ListofBAPI%27s
    Hope this helps.
    Regards,
    Satish Kanteti

  • Org managament -Cost Center- Position

    Hi Experts,
    There is  a clarification required, I am creating Jobs,Positions from 01.01.1900 upto 31.12.9999 and the FI consultant has created his Cost centers mentioning the date as 01.04.2009. As se says that I need to mantain the cost center creation dates only 1 year prior to GO-LIVE date.
    Now the problem is when I am creating one of the Positions in the Account Assignment tab details and its Cost distribution tab in Org Managment with PPOCE transaction, by assigning the positions relevent Cost Center where he falls to....the system throws and error stating that Cost Center not maintained on 01.01.1900 as it is the matter of that cost centers have been created only from 01.04.2009.
    So, now can any of you let me know how myself and FI consultant need to resolve this issue?
    Best Regards,
    KishoreJ.

    Hi,
    So, I would go ahead and create Jobs & Positions according to Cost Center dates. Can you please clarify me with one thing is
    Now If I create the Jobs & Position of the date from which Cost Centers have been created in my case 01.04.2009, will I be able to hire an employee with the created Jobs & Positions with previous date like for example an employee is working with Organization from 01.01.2003 till date as when I do hiringaction, system asks me for joining date, so mentioning his joinning date as 01.01.2003 and maintain all the Org data with Account Assignment, Cost Distribution as per the relevent dates.
    Thank You,
    KishoreJ.

  • Cost center catogery

    why we are giving cost center catogory at the time of cost center creation. what are the impact will come due to assigning cost center category. now we have give Categary T for all cost center. now we anted to create cost center for each and every department to see indivudial expenses. for that what categary i have to give from the following and what is the use to give catergory
    9     Allocation
    A     Administration
    G     Logistics
    L     Management
    M     Material
    P     Production
    S     Service
    T     Sales

    Hi Laxmi,
    The master data of an activity type includes one or more cost center categories. The activity type may be used only by cost centers of the appropriate categories (for all those cost centers with that Cost Center Category)
    For example, you created two Cost Centers A and B. In A's master data, Cost Center category is "P"(Production) and B's master data, Cost Center Category is "M"( Maintenance).
    Now, you are creating the master data for Activity Type "labour Hr". In that master data, you need to mention the Cost Center Category. If you give "P" there, that means that Activity Type can be linked (planning in KP26) to Cost Center "A" only....
    We define categories in Customizing. For each category, we can define default values for the "Lock" and "Record quantity" indicators, for transfer to cost center master data. We need to maintain these indicators only if the entry diverges from the default cost center category.
    In addition, we may use the categories for reports and evaluations.
    Examples
    Production cost center
    Service cost center
    Administration cost center
    Pls revert back for further explanation...
    Srikanth Munnaluri
    Edited by: Srikanth Munnaluri on Feb 25, 2009 6:46 PM

  • Setup Cost Center hiearachy first, then Profit Center hierachy later?

    Dear Experts,
    Should I setup the cost center hierarchy first, then the profit center hierarchy later? 
    Regards,
    Abraham

    I see.  but if I setup profit center hierachy first, then I got to redo the same for Cost Center.  I thought I could do the Cost center first, then copy them to profit center since there's a "copy cost center group" function in profit center accounting. 
    Can I deactivate the profit center accounting since each time I skip the profit center entry during cost center creation, the following message pop up?
    "Profit Center Accounting active but no profit center specified (CCtr 1110)"
    Regards,
    Abraham

  • Cost Center code proposed by system

    Hi Friends,
    Is there any option that system propose sequential internal code at the time of cost center creation?
    Now you are aware if you create cost center through KS01 you can put anything for cost center code. Do you don't think some control should be there like GL master creation?
    Regards,
    DJ.

    Hi
    If you are usng BW - better develop the report from there... Else, ABAP is the only solution
    Note that there is no correlation between Plant & Cost center except work center... Hence, Plant as an Input parameter in a cost center report is not possible.... Thats why, people prefer to have a cost center nomenclature that reflects the Plant No as well i.e. say 1st 4 chars of a Cost center name can resemble plant
    br, Ajay M

Maybe you are looking for

  • Execute PROCEDURE in ORACLE

    I try to execute procedure on ORACLE(8i) but get err SQLException .. but for SELECT UPDATE INSERT statements all is OK!! for SELECT, UPDATE, INSERT I wrote such code: Statement stmt = conn.createStatement(); String strExec="SELECT ...." stmt.executeQ

  • How to add the condition dynamically???

    Dear All, Here is procedure CREATE OR REPLACE PROCEDURE pp1 (mstring in varchar2) IS -- vyearqtr NUMBER := myearqtr; -- vyearnum NUMBER := myearnum; vstring VARCHAR2(1000) := mstring; vnum VARCHAR2(10); CURSOR c1 is SELECT TO_CHAR(a.COLUMN_VALUE) num

  • How to use SP_transaction_notification in SQL to provide SAP warnings?

    Hi Guys, I use SP_transaction_notification in SQL to block certain event and give error messages on sap screens.  Anyone knows how to provide a warning only using the same technique? For example if a user doesn't enter customer reference number on a

  • Passing value to RFC

    Hi Friends I have a requirement where I have to pass few values from Adapter Module to RFC which will update the database table. Example: I have to pass filename and filesize to RFC which will update the table X Could someone provide me the snippet o

  • Try - catch question..

    hello.. i was wondering if i can use a try-block and catch a built in exception without explicitly throwing the exception.. example: try{ foo[5] = 'A'; catch (IndexOutOfBoundsException e) { blah blah is this possible w/o throwing the IndexOut... exce