Cost Center derivation from multiple statistical account assignments

Dear all,
I have
a) a statistical internal with actual posted cost center A and
b) a statistical WBS with actual posted cost center B.
When posting with both (a) and (b) the cost center derived is from the statistical order. Is there a way to influence from which object the cost center will be derived.
Kind regards,
Orestis

Hi Orestis,
You can use substitution (OKC9) setting prerequisites as both internal order and WBS are filled and substituing the cost centre by the value from PRPS table.
Regards,
Eli

Similar Messages

Messg-AAPO189 :Account object Cost Center differs from that in asset master

At the time of Asset Acquisition in T-Code F-90 using Internal order, the system throws the following error:
Message-AAPO189 :Account object Cost Center differs from that in asset master
But in Asset Master data and Internal Order Master data's Cost Centers are same.
And we are not facing this problem for all Assets (only for few asset class only we are facing this error).
Please guide on this.
Note:
We are not using Joint Venture Accounting.
Regards
JS
Edited by: JS on Aug 12, 2009 7:14 PM

Closed

Cost Center Inheritance from Org Unit

Good day all,
Can someone please advise regarding cost center inheritance from org units?
I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
Thanks guys, have a lovely day!
Christy

Hi Christy,
As we know cost centre(K) is an unusual object in OM.Two type of objects internal whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
Hope this helps.
No Worries
KG

Streaming from multiple user accounts......problem

With my initial set up I had no problem. I have a large iTunes Library. 48k songs. Over 270 GB of files. I synced a few photos and some music for the AppleTV slide shows but everything else I was going to stream. Streaming is working wonderfully from MY user account but if I try and stream a similar sized library from another user account on the same computer it is "NO JOY". I get the "loading library" dialog with the little circle of dashes going round and round but it eventually gives up and does not load. I have tried this with iTunes running on my user account and with iTunes turned off on my user account and either way the library from the other user account will NOT load. I am at a loss here. The set up for the second user went smoothly. I clicked add a library and got a key code on my TV screen. AppleTV showed up in the devices column in iTunes of the second user account and accepted the key code but like I said earlier the library will just not load for streaming. Streaming from my first user account is still working well. I have not found any discussion topics dealing with streaming from multiple user accounts. Hopefully someone who is doing this will chime in and help me out if possible.

The only way I have been able to get this to work is to quit the iTunes that I am currently streaming from. Switch (on the computer) users to the library I want to stream from. Start iTunes on that user. If I follow this I can get AppleTV to load the library of the second user. If I do NOT quit iTunes from the first user it will not load the second user's library. If I have iTunes from the second user running at the same time I quit the first user's iTunes it will NOT load the second users library. I guess it is a bug and will need to be fixed with the next software release. I would like to be able to switch among user libraries at will and independent of which user is currently using the computer.

Bring profit center and cost center hierarchy from R3 to BW in BI 7.0

Hello,
I need to get the hierarchy from R/3 to BW. Can someone send me a link or mention steps i need to do to bring profit center and cost center hiearchy from R3 to BW.
Thanks
Laura.

As you would for any other infoobject
Activate the business content hierarchy datasources on R3 for cost centre and profit centre
Go into BW - replicate the metadata
Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
Then repeat new infopackages for all hierachies

Extracting cost center data from two tables

Hi Everyone,
I'm trying to extract cost center data from two different tables in SAP and pull it into one InfoObject. I'm using 0costcenter and it's already extracting data from one of the tables I need. Could someone explain how to add the second table? Thank you.

You can create a Generic Extractor , Create a view on 2 tables with proper join condition n use this to load 0COSTCENTER.

Mail hang when getting email from multiple POP accounts

I'm posting this issue again.
Mail hangs while getting new mail from multiple POP accounts almost every time. When it does, only Force Quit can quit it.
The following DID NOT fix the hang:
- Reconstructing all mail boxes
- Exporting, deleting and reimporting all mail boxes
- Disabling all rules
- Deleting anti-spam history
- Deleting all emails from all mail boxes
Testing each POP account individually while putty the other two offline works fine.
I also noticed that sometimes the new mail counter in Inbox displays 2-4 new messages while there is no new ones. Switching boxes/folders and back to Inbox fixes it.
The POP accounts are:
One plain text POP
One secure POP
One GMail POP
Can anyone help?

You’re welcome.
I did try to clear the junk mail preferences
The Junk Mail preferences cannot be “cleared”. What do you mean?
it crashes almost every single time.
It doesn’t crash (i.e. quit unexpectedly). It freezes (i.e. becomes unresponsive), right?
I transfered my data to a Mac Mini. I had the same exact problem on it too!
so it seems it has nothing to do with the OS plugins or the setup I have.
Well, that would depend on what exactly does “I transfered my data” mean...
Try first disabling all the rules in Preferences > Rules AND the junk filter in Preferences > Junk Mail. If the problem persists, proceed as follows.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all the mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Can I use Apple Configurator 1.6 to install Apps from multiple iTunes accounts on 30 iPads

Can I use Apple Configurator 1.6 to install Apps from multiple iTunes accounts on 30 iPads in South Korea?

Thank you again. I am actually just using a single computer at thsi time but will be setting up a Mac Mini in a day or so.
I actually believe I authorized my Mac Book for both my wife and my iTunes account. Yesterday when I hooked her iPhone up it told me that my computer was not authorized to download an app, i had to authorize this macbook.
So if the Apps from both iTunes account is on my Mac Book and I hook up my iPhone it will allow my to transfer the apps from my computer to my iphone? So lets say I am logged into iTunes account #1 and I try to use an app from iTunes account #2 will I have to do anything special?
Again thanks

No funds center derived for GR IR account

Dear all,
We have faced a strange issue in Funds Management. We have a GR IR GL account for which system automatically derives the commitment item and fund center based on those in the PO. That is, whatever FC and CI are maintained in the PO, the GR IR account derives the same accounts during MIRO.
However this is true only for material POs. We have created a service PO for a specific network of a project. In this particular case the system is not allowing us to post the invoice as it cannot derive the fund center. It seems during MIRO, the FM accounts of PO are not getting linked to the GR IR account. Please note that GR (or service entry sheet entry) is not relevant for budget consumption. Budget consumption takes place during PR,PO and MIRO.
Request your input in this regard.
Thanks
Snigdho

Hi,
First of all, you need to be sure that all existent correction notes are implemented in your system.
Please check if the following notes are applied in your system (including manual steps):
1289547 FM account assignment incorrect in GR/IR clearing in service
1327560 GR Account Assignments based on previoustly posted SES
1429223 GR Account Assignments based on previoustly posted SES II
1450965 FM account assignment incorrectly inherited from PO
1480503 FM account assignment for GL line overwritten in MIRO
1502874 Planned Delivery Costs are not updated during GR/IR postings
These notes correct wrong behaviours in include LFMCOBLF06 related to account assignment.
If the notes are not there but are valid to your current release/package, please apply all in one test system and retest your issue.
Regarding inheriting the FM assignments, material po's can retrieve the FM account assignments from the FM tables.
This ensures that the current FM account assigments are always used.
However, in the case of Services, it is not possible to use the FM tables as it is not guaranteed that the correct Account assigment will be retrieved. So, the SES table ESKN is used instead. The ESKN record is created at the time the SES is created.
In Summary: Due to the structure of Service documents, the FM tables cannot be used to access the previous document's account assignment. Material documents can use the FM tables to get the previous account assignemnt. So, for Material documents, FMDERIVE does not need to be called when a predecessor document is found. However, FMDERIVE needs to be called for SES because the SES application table does not store FM fields. So, this needs to be rederived.
I suggest you also to read SAP Note 923672 (do not apply it).
The account assignments on the SES screen are indeed changable. This is part of the standard design for SES process. Unfortunately, FM cannot control if the fields on the account assignment popup screen should be in edit, display, or hidden mode. This screen is control by SES, therefore is good that you check also this customizing in MM:
IMG - Materials Management - Purchasing - Account Assignment - Maintain Account Assignment Categories
In this activity, for the account assignment category which is the account assignment category used in the P.O., you have flag 'Acct. Assg. Changeable', then, the account assignment should be derived again. Not sure if you can restrict by different processes and for SES have this flag not marked so FMDERIVE will be not called and the FM account assignments would be inherit from the PO.
From my understanding, if the PO concern is a service PO, it is legitimate to accept the service (via ML81N) with different account assignments. Hence, the account assignment fields are not hidden or in display mode only.
From FM point of view, if a user does not deliberately change the account assignments on the SES screen or FMDERIVE is not setup to overwrite the FM account assignments, then by default the FM account assignments are inherited from the PO.
I hope this helps to overcome your issue.
Best Regards,
Vanessa.

Cost center assignment of GRIR clearing account

Hello Expert,
There is a purchase order assigned to an asset. the cost center K8071 is maintained in the asset. Later, the cost center is changed to K8410. Normally this cost center will always be determined from the asset. But in goods receipt (MIGO) and invoice verification (MIRO) , the wrong cost center K8071 is derived for GRIR clearing account. Can i get any help from you how to solve this issue? Thanks a lot!
Best Regards,
Ou Qin

Hello,
the cost center is really assigned to GRIR clearing item. It is standard system design. if checking GRIR line item, the cost center is filled for invoice verification of asset PO. Seems the function of derivation exists bug. Can any one know how to fix such error before? Thanks!
Best Regards,
Ou Qin

Accessing Cost Center Dimension From GL_BALANCE_F

Hi:
I'm modifying the P&L tab on the Profitability dashboard. Most of the lines are derived from Account values, some expenses are derived from cost centers. I understand how to assign accounts to account group numbers in the configuration .CSV files, and I've been successful at getting the correct values. But I can't figure out how to get data from the W_GL_BALANCE_F table by cost center. I see that there is a dimension for cost center. How do I make the join?
Any suggestions are appreciated.
Thank you.

Hi All
Thanks for your inputs.But
1.Cost center is real cost center to answer Saravan's question.
2.One to one PC to CC may be for postings but issue here is how CC is getting populated /Also Cost elemenet does not carry any cost center assignment.To answer Radha's quation.
3.Field is "optional".Thats fine if we make it REQUIRED it may pick the CC but now issue is now field is under" optional"but still it is picking up the CC.
Is there any other ideas please.
regards

Cost center derivation

SAP Gurus,
I have two issues while performing FB50:
1. When I enter the asset related GL account (Gain/Loss account), debit amount and hit enter. Cost center is automatically populated.
2. When I enter the marketing related GL account and the Statistical internal order, marketing cost center is populated automatically in FB50.
Can you please let me know where this cost center could have been configured to the GL account. I checked the derivation rules, substitution rules.
Moderator: Welcome to SDN. Please, try searching SDN first, before posting

Hi
. When I enter the asset related GL account (Gain/Loss account), debit amount and hit enter. Cost center is automatically populated.
Check OKB9
2. When I enter the marketing related GL account and the Statistical internal order, marketing cost center is populated automatically in FB50.
Check KO03.. the statistical IO will have a cost center assigned in it OR Check OKB9
Regards
Ajay M

Profit center derived from business area

Hello,
We are having a problem with one of our business areas. We are posting F-53 disbursements from a custom program (using a BDC). When we fill in the initial screen, we currently fill the business area field (GSBER). The profit center (PRCTR) is then derived from the business area. This is working for all of our business areas except one. For this one particular business area, an invalid profit center (one that doesn't exist) is somehow being derived. Where is the derivation determined? I've seen transactions 3KEH, 3KEI, and 1KE4 all mentioned in reference to derivation rules; unfortunately I can't access any of these (no authorization), so I can't even look to see whether we have any entries there or if those transactions are relevant to this problem. If someone can tell me which transaction or table would control the business area to profit center derivation, I can at least have someone with the correct authorizations take a look. I was able to look in FMDERIVE, and I don't see any relevant strategies there.
Thanks,
April Erickson
Solved: Entries were in 3KEI. The entries there had been moved to test and production, but the corresponding profit center entry in CEPC had not.
Edited by: April Erickson on Feb 11, 2009 5:07 PM

Hi sachin
Documnet type RE is given business transaction varaint 'vendor invoice'.
In this input tax account item category is assigned in the splitting rule.
In fact, system inherits BA and PC from opposite line item.
But when we substitute other PC in input tax account then the system stops inheriting for BA also.
So, my question is whether inheritance will apply to all characteristics only or it can be applied for one characteristic ( BA) and other charactriestic PC can be derived in another way using substitution.
Regards
S.Radhakrishnan

How to get Cost Center number from a Customer

Hi Sap Experts,
I have a customer number from xd03. But I would like to know which is the cost center used by this customer, how can I find that?
Because I'm getting an warning message when using FB08, it points to the Tax Jurisdiction issue. I believe at some point, it's checking the Jurisdiction field of the cost center.
Regards,
CHL

Hi,
Thank you for the reply.
The thing is, when I run FB08 for a specific document, i'm getting this warning Msg: Account assignment object has jurisdiction code XX, line iten XX AAAAAA.
I checked already the configurations for jurisdiction code in customer master data and the path "define tax jurisdiction code" with spro.
I noticed something, during the debug at some point its reading the cost center's jurisdiction number, and will compare it with customer's master data jurisdiction.
But if there's no cost center it will process fine.
It's in the program SAPLKAIP, form CostCenter_Check. Not sure if it's SAP standard code.
Cheers.
CHL

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

Cost Center derivation from multiple statistical account assignments

Similar Messages

Maybe you are looking for