Cost center is not getting determined for free of charge delivery

Dear Experts,
We have configured a new division, as part of the project, from the SD poing of view all requried config done, from the FI-CO side they created a new profit center and which is assigned to the materials ( of new division).
Alos completed OVF3 (Cost center determination).
now the issue is when am checking the cost center in accounting doc after PGI for the new material( new division) is not determined.
where as when am doing PGI for old material ( other division), cost center is determing.
Kindly advise what setting might be missing?
Serched in goolge but could not find the relavant answer.
thanks,
Srinu.

This is purely FI related issue and you can very well pass on this issue to FI team. You can also go through the following note for more information.
Note 83702 - INFO: Acct assignmt logic sales order proc. - REM
G. Lakshmipathi

Similar Messages

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Free goods determination with Free of charge delivery

Hello
After maintaining the Free goods Determination Record for a material using VBN1, when I create the order with order type OR, the free goods gets determined, where as when I create the order with order type FD, the free goods does not get determined. Can somebody let me know the reason for this happening and the solution please
Thanks in advance
Anoop

Hi
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion)
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
Moreover your doc type FD has sales doc category as I in VOV8 in standards
Hence it is not working and wont work also
These SAP library statements answers your qn and the constraints of free goods in R3
As long as document category is not C in VOV8 for your order type you cant get free goods in sales order
Regards
Raja

Excise and sales tax for Free of charge delivery

Friends,
Kindly explain somebody whether Duty and taxes are leived during free of charge delivery. If it is levied then what is basis for calculating duty?
Plesse help on this.
Thanks in advance

Hi Pratap,
For free goods you have to pay excise duty, that is why i recommend you to follow a new pricing procedure, where the Price Condition type is statistical(to calculate excise) and give payer as self if the excise duty you would not get from customer,\
1.Create invoice and excise invoice.
2. If you don't want to to hit self(given in document header partner) create proforma and excise invoice
revert if you require any clarrification.
regards.

Proforma Invoice for Free of Charge Delivery

I want to know how to create a pro forma invoice for a free of charge delivery. Currently the item category is KLN and it says that the item category is not relevant for billing.
Thanks in advance
Dinesh

Hi,
Check item category detail screen Billing relevance filed.if you want to create invoice this should be actiavted.
Regarding Profroma invoice you need to mention in the order type(VOV8).The field called order related billing,here you have to mention proforma billing doc. type.
Let me know if you need more info.
Regards,
Chandra

Cost center field not getting updated to the second level dso

Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
Sudha

Hi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr.

How to do billing for Free of charge delivery item

Hello Gurus ,
We have some requirement: The requirement is this company is delivering the goods to customer in free of charge, but want to do Billing is it possible.
But as per my knowledge it is not there in standard , I checked in system .
looking for your inputs .
Thanks in advance
Regards
Venkat

Hi Venkata,
This is very usual in Brazil because we have a Legal Requirement that all goods must have a Eletronic Nota Fiscal issued and following along with the goods. And the Eletronic Nota Fiscal is generated along with a Billing. Also, usually companies want to account this billing for a give Cash account, so they can cost someone for the free goods later.
Here is what usually changes. On sales order we require a Cost Center. This also may help modifying your OBYC for the free of goods material document (they will be set as consumption since there is a cost center associated with the transaction). We created a billing document type pointing to a z account document type (ie ZG) - to avoid mixing them along with the RV documents. Also, we inform a account key for cash allocation (the billing will not be accounted for a customer, but actually for a cash account). To do this you have to fool SAP informing an account determination cash settlement, which will allow you to inform the Acc.Key-cash alloc. field - after remember to blank the acc.det.cash settl.
It is not that easy, but works fine.
Regards,
André L L Dantas

Free goods determination & Free of charge Delivery

Hello Gurus,
Actually I have couple of queries regarding free goods.
1) Can we manitain free goods for BOM
Business Scenario - I have created a BOM "ABC" at Main item level (ERLA) with components B, C and want to give 2 different Items X, Y as free goods other that sub components. So is it possible to assign TANN itm catg with TAQ, will it work ? what will happen with taxes for free goods?
Tool Kit, ABC----(TAQ)
                 B -
(TAE)
                 C-----(TAE)
                 X------(TANN)
                 Y------(TANN)
if not possible what will be solution to map the above scenario ?
2) How to maintain the Free of charge pricing procedure?
                       I maen what condition types should we maintain into the free of charge pricing procedure control data (V/08)? If there is a standard pri pro for Free of charge delivery plzz Suggest to me.

Hi,
1. Application of Free Goods in BOM is not posible. Moreover Free goods attract zero value only the material document is updated.
I can suggest you to use the process "Rebate of a Kind" where in you can manually enter the subproducts as free goods only thing is you will have to mention main item lineno in the higherlevel item categor of the sales order.
Though i tried long back the requirement you need, it will not work the best way is to give manually in SO.
2. Free sample maintain seperate process i.e, Document Type, item category Pricin Procedure.
For Configuration please check Img -->SD --> BF --> Free Goods --> Condition Technique free goods
-- Better you maintain "C" Document type while doing determination.
Regards
Sathya

Free of charge delivery and free goods

hello,
I need clarification on the following.
There are two different things. one is free of charge delivery and the other is free goods.
1) for free of charge delivery, order type is FD , I think we have to maintain TANN(with pricing as B,100% discount). This will trigger R100 as 100% discount condition in pricing procedure. Am i right ?
2) The other is Free goods determination(OR order type). where free goods condition records are maintained and gets determined in sales order. for this scenario, TAN and TANN (100% disc) is maintained in item caterory determination. I think in this case NRAB is required and not R100 in pricing ? am i right ? ..
regds

Hi,
Free of charge delivery -
Free of charge delivery is used mostly when you provide samples to customer
http://help.sap.com/SCENARIOS_BUS2004/helpdata/EN/31/923341431ef723e10000000a155106/content.htm
Free goods -
It is mostly used when you are providing something free when customer purchase of one Item/material
http://help.sap.com/SCENARIOS_BUS2007/helpdata/EN/b7/4a893a8729337be10000000a11402f/content.htm
Kapil

COGS determination for Free of cost sales order

Hi All,
We have an issue regarding the COGS determination for Free of cost sales order. We created a free of cost sales order. But i need to know whether this sales order items will hit to COGS or not? If so how do i check whetehr its has been charged to COGS or not? and we have an issue raised saying thst one material in this sales order has not being charged to COGS. So please help me to solve this issue. Ihave checked the account assignment in GBB-VAX. And is there anyting to do with the settlement profile for COGS determination?.
Thanks and regards
Uday

Hi,
During PGI a material document and accounting doc gets created which would hit COGS account.
You're talking about one specific sales order in which for one material it didn't hit COGS account or any order you're creating now with that material has an issue? If its a specific material which has an issue always..then something is wrong with that material master setup. Also you can go to the reported Sales order--doc flow to the PGI document and check the accounting doc and if its not posted..check the analysis why its not posted?
And if its one off then I would suggest 2 options:
1) Reverse the goods movement, cancel the delivery or if billing has already been done..cancel the billing as well. And re-do the cycle. This always ensures correct posting.--> Recommended option.
2) Manual adjustment in FI.
And settlement profile is Controlling concept..not sure you would get any help on this in this forum.
Regards
RS

Cost center valorization for free of charge item

During sales order entry I need to have some
- standard item that have to be invoiced to the customer
- free of charge items; these items have not to be invoiced and for them I need to value a specific cost center ( for the standard price stored in material master data).
I know there is a customizig setting I can use to manage the relationship between the order reason and the cost center but this value is valid at header level (VBAK-KOSTL) while I don't know how I can set different cost center at item level (VBAP-KOSTL).
Thank you in advance,
Alessandro

Hi,
in NewGL I am sure that its not possible as there is no accounting document created (which contains the PRCTR information as well) if the revenue is zero.
And I am pretty sure that its not possible too in old PCA (Ledger 8A).
CO-PA docs. can be created for free of charge items (otherwise the cost of these items are missing in costing-based CO-PA).
BR Christian

Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

Hi All,
When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset.
When I see the FI document display, the fields Cost Center and Plant are blank. Business Area and Profit Center fields are getting updated.
Can any one help me how to get this Plant and Cost Center in the posted document. Is there any OSS notes for this. I am using ECC 6.0 version.
Thanks in advance for your help.
Regards,
Rajesh

Rajesh
Aditional on me answer.
The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
Steps
Click on Simulate, than you see the posting screen:
Click on the line (pk 40)
Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
An other option is to make a substitution to get this information

Do I have the chance to get Photoshop for free if I'm a student? I mean the full version and not the trial.

Do I have the chance to get Photoshop for free if I'm a student? I mean the full version and not the trial.

No. Just the student rate on a permanent or subscription license. Some places do include Photoshop and other products as part of the tuition, but it is a separate arrangement and most likely temporary.
The Photography Plan is a fine deal at $10 a month. Creative Cloud Photography plan | Adobe Creative Cloud
Otherwise there are free and paid lower cost Photoshop alternatives you can look into.

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Cost center is not getting determined for free of charge delivery

Similar Messages

Maybe you are looking for