Cost Center Linkage between Functional Location and Equipment.

Hi Gurus,
We have found in our analysis that it is impossible to copy the cost center of a superior functonal location to a subordinate one when the cost center of subordinate functional location is changed manually.
We intend to do a mass change for our cost centers of all our functional locations and equipments for all our plants. We need to know how do we achieve this change of cost centers.
Thanks:
Siddharth

Thanks All for your information.
Actually the Master data team has to do a mass update of cost centers for the Functional locations and Equipments.
And what we have found is that when we change the cost center for an equipment individually it changes the cost center origin of the equipment to "D" which means independent of the changes in the cost center at FL level.
Be it IBIP or any other way what we have found that the linkage(cost center origin) between the FL and the EQUIP changes to "D"  when ever we change the cost center for the equipment.
We don't want to change this linkage as it may have other consequences that we can not foresee at this point.
So, my question is :
If the FL and EQUIP linkage (cost center origin field) is changed(from H to D or D to H), what could be the effect on the FL and EQUIP relation?
Cost center origin :
D       Independent of changes in cost center at FL level
H       It is dependent on the FL cost center.
Thanks:
Siddharth

Similar Messages

  • How to get Classes of Functional Location and Equipment

    Dear Experts,
    I would like to know how to get all the classes in Classificaition of Functional Location and Equipement, FM ITOB_GET_CLASS_STANDARD is only get 1 class, how do I get all declared classes inside classification?
    Any table or FM?
    Thank you.
    Regards,
    Weng

    Weng,
       Table KLAH would give you all the available classes for every class type.
        FM CLAF_CLASSIFICATION_OF_OBJECT would get you all the assigned classes of a particular type for a object.
    Regards
    Narasimhan

  • Table for linkages between(functional location) FL5 & Equipments

    Hi Gurus
         Please can you tell me Table for linkages between(functional location) FL5 & Equipments
    regards
    Krish

    Have a look at view table V_EQUI
    PeteA

  • Replication of functional location and equipment from ECC to CRM.

    Hi Guys
    I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

    As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
    In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
    -     Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
    Bye,
    sekhar.

  • Table Link between Functional Location and Class

    Functional location has 'class' ( under section 'general data' in tab 'location'). Could anybody suggest the table name where I can get one to one mapping between the functional location and it's 'class'.
    I have put the functional location in KSSK-OBJEK   but when I am providing the functional location say 
    ?0100000000000838737 in this field of table KSSK, it is resulting no output. Could you please elaborate
    more or suggest something.
    Thanks,
    Hetal

    Hi Gurus
    I am also looking for same information.
    Would you please advise where to get this Internal Type?
    Also would you please advise what is the use of table KSSK in whole process?
    Thanks in advance
    Kris

  • Extension functional location and equipment master data

    Hi,
    We have around 200 functional location (having 3 structure indicators) and 10,000 equipments (Having external number range) on a controlling area and on different company codes.
    Several orders have been created by this data and now company wants to change controlling area, company codes, maintenance plants and planning plants with having old data in the same system server and client.
    I want to know is it possible to create same codes functional locations and equipments on new maintenance plants and planning plants having new company codes and controlling area? (It has observed that once we assign maintenance plant, the system automatically picks company code and controlling area and these fields become highlighted and can't be changed) OR
    Is there any possibility to use old data in orders with reference of new plants company codes and controlling area?
    What will be the end solution, should I create the new structure indicators for functional locations and new equipment names that must not be matched with the old equipments?
    Regards,

    Hi,
    Thanks for prompt reply,
    a) If we change permanently then you mean to say the old master data record will remain in the system with all old transaction data, please confirm?
    **b)Alternatively, can I create same (exactly like old codes) functional locations and equipments codes on new maintenance plants (having new company coded and controlling area)?**
    I will have same client and server for the whole scenario 
    Please reply soon
    Best Regards,
    Edited by: PROCESSES EXPERT on Jun 29, 2010 8:36 AM

  • Functional Locations and Equipment List?

    In structure list - is it possible to see (recognize by sight - without opening-checking each piece) which Functional Locations and/or Equipment units are active/inactive?
    Here is example of strctural list, opened via IW21 transaction.
    Any naswer/idea(suggestion is Welcome.

    Zeljko Vasilik,
    Add the System-Status field into the Structure List(s) via menu path: Settings->Field Selection
    PeteA

  • Functional location and cost center link

    Hi All,
    I need to know the table that contains the details of functional location and the cost center mapped to that.
    I know a table IFLOT which gives details of the functional location, however i do not see field for cost center in that.
    Let me know if there is any other table which gives this data.
    Thanks,
    Regards
    Raghavendra

    Raghavendra,
    Pass the ILOAN of your Functional location to ILOA table and get 'KOSTL' - Cost center.
    Babu

  • PP Work Center ------  PM Functional Location, PM Equipment

    Hi,
    For a given PP Work Center , I want to have the table where details of PM Functional Location & PM Equipment are stored, in which the PP Work Center is used.
    Thnx,
    Shivaa.

    Hi Shivaa,
    Go to T.Code : SARA and giving archive object : PM* + press F4 you will get the following
    Try with the following tables:
    PM_EQUI    Equipment
    PM_IBASE   IBase
    PM_IFLOT   Functional Locations
    PM_IMRG    Measurement Documents
    PM_MPLAN   Maintenance Plans
    PM_NET     Object links, master data
    PM_OBJLIST Serial Number History
    PM_ORDER   Service and Maintenance Or
    PM_PLAN    Routings
    PM_QMEL    Maintenance Notifications
    From the above list click the suitable one and press database table tab. You will get all the relevant database tables.
    Here you go...
    If it is useful reward points
    Thanks
    Saravana
    Edited by: K Saravana Kumar on Jul 30, 2008 8:25 PM
    Edited by: K Saravana Kumar on Jul 30, 2008 8:26 PM

  • Table Link between the Functional Location and work order

    Hi Gurus,
    I am stuck in a big problem and have to find a way to list down the work order with a specific user status in the system. I am trying to link it based on the functional location as the inputs will have to be functional location and the date. Can any one guide me with the tables to link these two???
    Thanks in advance
    Anoop

    Hi,
    Depending on your exact requirement, you might be able to select from view VIAUFKST_IFLOS. This would allow selection based on order, functional location and various dates. The field IPHAS will give you some system status information - value will indicate which status the order has reached. Example value = 3 indicates order is technically completed.
    To get the exact system status (or user status) you need to read the JEST table. Read this table by OBJNR. The object number will have the format OR005000123456 (where 5000123456 is the order number). It will be available in the order tables.
    Status values in JEST are in the internal format - example I0002 = REL. Check transaction BS23 to see the link. User status values will have the format E0002. If INACT flag is set in a jest record then that status value is not active. If you want to check for a specific status value then call function STATUS_READ.
    -Paul

  • PM - Functional location and measuring points

    Dear all,
    is there any table that stores the link between a functional location and measuring points?
    Thanks in advance for any help.
    Regards,
    sb.

    Hi
    you can go for
    EQUI                             Equipment master data
    Arunima

  • Need technically the linkage between Shopping Card and PO (SRM).....

    Hi SAP Gurus,
    I am using SAP SRM 7.0 and wanted to find out:
    1) Technically the linkage between Shopping Card and PO (SRM). (Basically looking for required table names and the fields)
    2) Technically the linkage between Shopping Card and Reservation (SRM) . (looking for required table names and the fields)
    Thanks....

    Hi Siobhan
    thanks. but every customer wants to know what happened to his cart if the status is COMPLETED or not. Why SAP missed this small piece of functionality to show COMPLETED status via WEb transaction. I can see only this via REDISTRIBUTION WORKLOAD transcation status. right hand side green tick mark. this green mark totally mislead every body. mixuter of status shows green tick mark (COMPLETED + FOLLOW ON DOCUMENT CREATED etc) in redistribution mark.
    Appreciate your reply .
    I tell you in detail .
    for ex CART went to ERROR IN PROCESS but no where the requestor can see his cart and he got dismayed and admin can see his cart . ok. if i go see in redistribution menu it shows COMPLETED logo. it mislead whole business.
    Muthu

  • Cost center planning by functional area

    hi gurus,
    The client needs to do manual planning in CO (KP06) by cost center/cost element/fund/functional area. This data is later gets rolled up in FM to formulate the budget data. The client wants to enter all the account assignment manually except for functional area. They want that system automatically derive the functional area based on the cost center (one to one relationship). I tried the CO substitution but this functionality is only for actual data and not plan data. Any suggestion how I can derive the functional area in CO planning based on cost center?

    Hi,
    Functional area is required for cost of sales accounting in Finance. It has got nothing to do with Cost Center planning. Functional area shall not be visible in controlling. Pl update this constraint to the client and go ahead with Cost center/cost element planning with necessary one to one relationship with Fund center, etc.
    Trust this helps much!
    Cheers!

  • Partner data from Functional Location to Equipment

    Dear Expert,
    How can I transfer partner data (Bill to party, Ship to party) from Functional Location to Equipment. I have tried with 'Install with data transfer' but there is no option available for partner.
    Is there is any other way to transfer partner data while assigning Equipment to Functional Location.

    Hi,
    Functional Location:
    Define field selection for partner data fields   :   Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations --Field Selection for Multi-Level List Displays of Functional Location.
    The Partner tab should be visible in the functional location: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service-- Technical Objects-- General Data -- Set View Profiles for Technical Objects.
    Assign functional location category to partner determination procedure: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations -- Define Category of Functional Location.
    Define field selection for partner data fields
    Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --Equipment -- Define Field Selection for Multi-Level List Displays of Equipment.
    The Partner tab should be visible in the equipment
    Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --General Data -- Set View Profiles for Technical Objects
    Assign equipment category to partner determination procedure
    Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service --Technical Objects --Equipment -- Assign Partner Determination Procedure to Equipment Category.
    Regrads
    bharat

  • Sending Functional Location and Equipments using ALE

    I want to knbow the transaction code for sending the Functional Locations and Equipments.
    Like for Material we have BD10, I need the TCode for both Functional Locations and Equipments
    Also please let meknow the message type and basic types for the same.
    Thanks in advance

    I dont think there is any standard t-code available for distribution of functional area and equipment.  Anyway check the menu path SAP Menu -> Tools -> ALE -> Distribution in applications/Master data distribution.
    For IDOC and Message type details check transaction codes WE30 and WE81.
    Regards
    Vinod

Maybe you are looking for

  • Backing up an external hard drive, one half for PC (FAT32), other for MAC?

    Hey people, I've just bought a Lacie 1tb eternal hard drive which I would like to partition into two halves - in theory one half for the PC and the other half for the MAC, backing up all data held on the mac using Time Machine. Is this possible? If s

  • Executing a Operating System command from Stored Procedure ??

    I want to execute a Operating System command from a PL/SQL Stored Procedure, can anyone suggest me how can I do this ?? I am on Sun-Solaris with Oracle 8.1.7 database. Please do email me at [email protected] Thanks in Advance, Ramesh L.

  • Intermittent MousePressed Events

    I am having trouble with mouse pressed events. I have a JFrame with 2 images in JPanels, with a separate JComponent sindow that will display one or the other image with a delay. It flickers between the 2 images using a thread. The JPanel responds to

  • Material for Accounts Payable

    Hi Friends,   In FI module am planning to study Accounts payable in specific.Can anyone please tell me some good materials regarding this topic.

  • Terms & Conditions PROBLEM

    I have a problem with IOS 7 I think.When I want to download a app says cause Terms & Conditions have changed and I taped ''OK''. I read it but there is no Agree or accept button! I can't accept it because is not an agree buton.There says if you agree