Cost center not picked up in the APC posting for Asset

Hi,
The account assignment object KOSTL is active in system, with the below settings.
and below is the transaction type specific settings.
in the posting key and the GL accounts Field status groups, the cost center is optional and activity type is also optional.
In Asset master the cost center is maintained.
But while doing the Asset Acquisition postin the cost center is not updated in the document.
It was expected that the cost center will be derived from asset master and would have reflected in the 1st line item.
Please help me understand, if some other configuration has to be looked at for this perticular issue,
Regards
Rudra

Hi Ganesh / Rudra
CC in Asset Postings has a purpose
Since no Profit Center is directly maintainable in Asset Master atleast until EhP4 or 5, the PC in Asset APC line item was derived through the Cost Center or Internal Order maintained in Asset master
For that reason, your asset APC account must be created as Cost element, even though it is a Balance sheet account.. The cost element category will be automatically 90 - Statistical Cost element
Check if the APC account is made as Cost element or not.. That would be the reason most probably
Hope it is clear
Br. Ajay M
PS :- I heard that from EHP5 or 6 PC can be directly maintained in Asset Master.. I have not seen it yet, so i cant comment on it

Similar Messages

  • G/L Account & the Cost Center not updating in BAPI_PO_CREATE1

    Hi,
    We are using BAPI_PO_CREATE1 for Service PO Creation.
    The System is creating the Purchase Order, but it is not updating the G/L Account & the Cost Center.
    We are passing the following parameters:
                    wa_poaccount-PO_ITEM  = '00010'.
                    wa_poaccount-SERIAL_NO   = '01'.
                    wA_poaccount-quantity   = '100.000'.
                    wa_poaccount-GL_ACCOUNT  = '0058120000'.
                    wa_poaccount-COSTCENTER  = '1000-LSG'.
                    wa_poaccount-itm_number  = '000010'.
                    wa_poaccount-CO_AREA     = '1000'.
                    append wa_poaccount to it_poaccount.
                    clear wa_poaccount.
                    wa_poaccountx-PO_ITEM = '00010'.
                    wa_poaccountx-SERIAL_NO   = '01'.
                    wA_poaccountx-quantity   = 'X'.
                    wa_poaccountx-GL_ACCOUNT = 'X'.
                    wa_poaccountx-COSTCENTER = 'X'.
                    wa_poaccountx-CO_AREA     =  'X'.
                    wa_poaccountx-itm_number  = 'X'.
                    append wa_poaccountx to it_poaccountx.
                    clear wa_poaccountx.
    Please guide how to correct the error.
    Regards,
    PK

    Hi,
    Thanks for the reply.
    We are passing the following parameter in POITEM.
                      clear wa_poitem.
                      wa_POITEM-PO_ITEM = '00010'.
                      wa_POITEM-PLANT = '1003'.
                      wa_POITEM-TAX_CODE = 'S1'.
                      wa_poitem-MATL_GROUP = 'SER04'.
                      wa_POITEM-ACCTASSCAT = 'K'.
                      wa_poitem-ITEM_CAT   = 'D'.
                      wa_poitem-pckg_no    = '0000000001'.
                      wa_POITEM-SHORT_TEXT = 'Freight Service'.
                      append wa_POITEM to it_POITEM.
                      clear wa_poitemX.
                      wa_POITEMX-PO_ITEM = '00010'.
                      wa_POITEMX-PLANT = 'X'.
                      wa_POITEMX-TAX_CODE = 'X'.
                      wa_poitemx-MATL_GROUP = 'X'.
                      wa_poitemx-short_Text = 'X'.
                      wa_POITEMX-ACCTASSCAT = 'X'.
                      wa_poitemx-ITEM_CAT   = 'X'.
                      wa_poitemX-pckg_no    = 'X'.
                      append wa_POITEMX to it_POITEMX.
    Please guide.
    Regards,
    PK

  • While creating Maintenance order using t-code iw31 mainwork center not pick

    Hi,
    while creating Maintenance order using t-code iw31 Maintenance work center not picking from drop down (already have in drop down)but giving manually accepting.
    --Ganesh

    Hi,
    My understanding is that the selected work center is not copied into the input field. This can be corrected with note [1451299|https://service.sap.com/sap/support/notes/1451299]. Check if the note is relevant for your system.
    -Paul

  • Cost center not visible in PR05

    Dear All,
    I have a situation.  This employee was transferred from one company code to another with new cost center.  When he was in the previous company code, he has created an expense report and saved but NOT submitted.  Now the cost center is not visible in the PR05 screen, however in simulation it is showing the correct cost center (previous cost center).  Kindly let me know why this cost center is blank, as per the SAP standards, it should show the cost center which is active during that period of time when he creates the trip.
    Regards,
    LNB

    Hi,
    In PR05 the cost center at line item will not show if the default cost center from the employee master data is taken. You can check at the table level which cost center is taken for the trip level. The table is PTRV_SCOS. It is not very clear what is the issue you are facing. Pls provide more details like screen shot OR some more description.
    Regards,
    Vijay

  • Cost Center not appearing in Hierarchy

    Hello,
    I am sending an IDoc from an external system into ERP to create new cost centers.  The IDoc comes in successfully and creates the cost center and I can see that it was correctly assigned to the cost center area if I look at the record in KS03.  However, when I look at the cost center hierarchy it does not show that the cost center has been assigned to the correct node. 
    Any clue why this may be happening?

    Hi,
    When sending cost center data with COSMAS01 this will include the hierarchy node in the cost center master data (separate field in cost center table CSKS). So only the information of the cost center node is transported. However, COSMAS does not include the hierarchy itself.
    This is a separate IDoc type, namely COGRP1 which is not transported with IDoc type COSMAS01.
    Nevertheless, the hierarchy can then be rebuilt in the target system by running RKCORRH1. This report will read the cost center´s master data and insert this cost center into the specified node of the standard hierarchy.
    This is actually a regular procedure - if you do not want to run the report you may also need to send the hierarchy with IDoc type COGRP1 separately.
    regards
    Waman

  • Cost Center not appearing in FAGLL03

    Dear Forum,
    We have come accross a peculiar situation. The GL Document is posted using the Non-Statistical Order as well as Cost Center. However, when we veiw the Expense GL Account using the T Code FAGLL03, we cannot see the Cost Center, but can view the Profit Center. But when we view the Exepnse GL Account using the T Code FBL3N we can see the Cost Center. What could be the reason for this? Is it becuase of the use of internal Order in the document? This abnormal behaviour is being observed only in case of document with Internal Order and not in case of other documents posted with Cost Centers but without Internal Orders. What do we need to check to understand this behaviour?
    Would appreciate your help in this regard.
    Regards

    Check the below thread:-
    [Re: Cost center missing in FAGLFLEXT;
    Regards,
    Gaurav

  • How to set master cost center to required input in the maintaining position

    Dear experts,
             I have two questions in the HCM module,could you please tell me?
    Issue 1: How to set the column of master cost center to required input in the maintaining position screen?
    Issue 2: some of position has two cost center, i have maintained two cost center(cost center 1:90%,cost center 2:10%) percentage in the tab of cost distribution with trasaction code ppome.when i post to accounting,it only post to master cost center 100%,it can not distribute two cost center, Could you please tell me the reason?
    Looking forward to your reply.
    Best regards,
    Merry

    HI,
    Plz check with ur FICO Consultants as master Cost Center r desgined by them
    They will Loop group of Cost Centers to Master Cost Center.
    This concept has started in ECC 6.0 Version 
    Regards,
    Kiran

  • I reset network settings on my iPhone. However now it looks as if my iPhone and iPad are no longer linked. They are both connected to my apple account but when I send an imessage from one it is not picked up by the other. What do I do?

    I reset network settings on my iPhone. However now it looks as if my iPhone and iPad are no longer linked. They are both connected to my apple account but when I send an imessage from one it is not picked up by the other. What do I do? If anyone can help it would be very much appreciated. Many thanks x

    Check Settings > Messages > Send & Receive on both your iPhone and your iPad to make sure that the following are all true:
    (1) you have selected the same Apple ID on both devices,
    (2) you have the same entries checked under "You can be reached by iMessage at:" on both devices,
    (3) you have the same entry checked under "Start new conversations from:" on both devices,
    and
    (4) that the entry checked in #3 is one of those checked in #2 on both devices.
    When you say it has affected your iCloud account, what effect has it had?

  • JMS message is not picked up by the listener

    We have created a queue in a cluster. We have an application that listens to a queue. Messages from another application will post message into this queue which is inturn picked up by the listener process.
              We posted a message to the queue long back.But it was not picked up by the application. Then, again we sent two more messages. These recent two messages were picked up by the application.
              We looked into the queue using QueueBrowse program from weblogic samples. On running the program, it sometimes shows that the first message (which was not picked up) is still there in the queue. Sometimes, it shows that there is no message in the queue.
              Have you faced any such scenarios earlier? Please help me knowing why this is happening.
              Thanks in advance.

    I also found in my queue listener's log the following exception stack trace.
              weblogic.jms.common.LostServerException: weblogic.rjvm.PeerGoneException: ; nested exception is:
                   java.io.EOFException
                   at weblogic.jms.client.JMSConnection.jmsPeerGone(JMSConnection.java:908)
                   at weblogic.jms.dispatcher.DispatcherWrapperState.peerGone(DispatcherWrapperState.java:691)
                   at weblogic.jms.dispatcher.DispatcherWrapperState.callback(DispatcherWrapperState.java:552)
                   at weblogic.rjvm.RJVMImpl$HeartbeatMonitorListenerDeliverer.execute(RJVMImpl.java:1412)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              Is this exception related in any way to the above stated issue?

  • [svn:fx-trunk] 13687: Add in osmf and flash-integration localized files not picked up in the previous commit  (13686)

    Revision: 13687
    Revision: 13687
    Author:   [email protected]
    Date:     2010-01-21 07:25:58 -0800 (Thu, 21 Jan 2010)
    Log Message:
    Add in osmf and flash-integration localized files not picked up in the previous commit (13686)
    Added Paths:
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/de_DE/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/de_DE/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/de_DE/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/fr_FR/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/fr_FR/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/fr_FR/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ja_JP/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ja_JP/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ja_JP/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ru_RU/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ru_RU/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ru_RU/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/zh_CN/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/zh_CN/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/zh_CN/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/packages.dita

  • HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    Not really sur easy you would be having that problem.  Mine works.  You might try RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • I just bought music on my iTunes account and the files did not download completely. The songs play for a minute or so then skips to next song.

    I just bought music on my iTunes account and the files did not download completely. The songs play for a minute or so then skips to next song

    If you live in a Region that allows re-downloading Music... Delete the Song and re-download it...
    Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

Maybe you are looking for

  • Animated gif within Captivate movie?

    I'm trying to insert an animated gif into a Captivate movie, but when I do, the gif doesn't animate -- it just shows the first frame. Is there a trick to getting these animated gifs to actually play within the Captivate movie, without having to do a

  • How do I simply replace a clip in this situation...

    I have a video clip in my timeline that has been trimed at head and tail. It has a couple of pieces of audio attached to it. I want to replace it with a newer version of the clip witout disrupting my timeline. None of the Replace options put it in th

  • Packing Material with Batch Management and Shelf life expiration date check

    Dear All,           I created a packing material and activated batch managemnt with shelf life.             At the time of GR the batch should be created automatically or if i want to create a batch manually for some materials how to do it in the sys

  • I/O problem

    Hello everyone, I am trying to code a class that reads a line from the keyboard. I used: - InputStreamReader - BufferedReader - PrintStream Code is as follows: public class ReadString{      public static void main(String[] args) {           InputStre

  • Help: URL encoded in Base64 not working with SP4

    With SP1, there was no problem but after installing SP4 (don't know whether it is accidental), this problem started occurring and I don't know what caused it. Here is the description: I have SP4 running on Solaris 8. An applet is launched and sends a