Cost Center not updated in accounting documents generated in SAP RE-Fx

Hi Experts,
I'm facing an issue wherein I don't see the cost centers getting updated in the accounting documents generated from RE postings.
Pl. note that the appropriate cost center (relevant to the cost center) is maintained in the rental objects.
What is the customizing settings I'm missing out due to which I don't see the cost center updated in the accounting documenmts?
Thanks & Regards
Shantanu

HI Shantanu,
As far as I know, in RE-FX we can post the cost to the RE object directly. All the objects in RE-FX (i.e. BE, BU, PR, RO, RECN, SU, etc) are cost objects in themselves. However, to post the cost to Cost centers you will need to run the CO settlement. Again CO settlement rule is available in all these objects.
Please refer the SAP Library for further explanation:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/00/80383b1b793821e10000000a114084/frameset.htm
Regards
Rohit

Similar Messages

  • Cost Center not updating in FI documents

    Hi All,
    I have an issue,
    I am confirming Gem,Maintenance PM order,and consuming spare part, but in FI documents its updates the cost center,PM pm order cost receiver object is cost center in the settlement rule.
    please guide me which settings required for update the cost center in FI documents.
    Regards,
    Santhosh

    Hi,
      The cost center on the Goods issue document is not related to the settlement cost center on the order.Why would you need the settlement cost center on the Goods issue FI document?
    Regards
    Narasimhan

  • Profit center document created but profit center not updated in FI document

    Hi Experts,
    I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
    We have separate table to identify the profit center by customer.
    Please let know what could be the cause or reason for this kind of scenario
    Thanks,
    VK

    Hi Krishna,
    Though ur question seems very old, but now i got the same requirement as like you.
    So if you remeber what needs to be done for this issue thats very good help to me.
    My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
    And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
    And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
    So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?.  if yes, plz tell me how to proceed.
    Thanks
    Madhan

  • G/L Account & the Cost Center not updating in BAPI_PO_CREATE1

    Hi,
    We are using BAPI_PO_CREATE1 for Service PO Creation.
    The System is creating the Purchase Order, but it is not updating the G/L Account & the Cost Center.
    We are passing the following parameters:
                    wa_poaccount-PO_ITEM  = '00010'.
                    wa_poaccount-SERIAL_NO   = '01'.
                    wA_poaccount-quantity   = '100.000'.
                    wa_poaccount-GL_ACCOUNT  = '0058120000'.
                    wa_poaccount-COSTCENTER  = '1000-LSG'.
                    wa_poaccount-itm_number  = '000010'.
                    wa_poaccount-CO_AREA     = '1000'.
                    append wa_poaccount to it_poaccount.
                    clear wa_poaccount.
                    wa_poaccountx-PO_ITEM = '00010'.
                    wa_poaccountx-SERIAL_NO   = '01'.
                    wA_poaccountx-quantity   = 'X'.
                    wa_poaccountx-GL_ACCOUNT = 'X'.
                    wa_poaccountx-COSTCENTER = 'X'.
                    wa_poaccountx-CO_AREA     =  'X'.
                    wa_poaccountx-itm_number  = 'X'.
                    append wa_poaccountx to it_poaccountx.
                    clear wa_poaccountx.
    Please guide how to correct the error.
    Regards,
    PK

    Hi,
    Thanks for the reply.
    We are passing the following parameter in POITEM.
                      clear wa_poitem.
                      wa_POITEM-PO_ITEM = '00010'.
                      wa_POITEM-PLANT = '1003'.
                      wa_POITEM-TAX_CODE = 'S1'.
                      wa_poitem-MATL_GROUP = 'SER04'.
                      wa_POITEM-ACCTASSCAT = 'K'.
                      wa_poitem-ITEM_CAT   = 'D'.
                      wa_poitem-pckg_no    = '0000000001'.
                      wa_POITEM-SHORT_TEXT = 'Freight Service'.
                      append wa_POITEM to it_POITEM.
                      clear wa_poitemX.
                      wa_POITEMX-PO_ITEM = '00010'.
                      wa_POITEMX-PLANT = 'X'.
                      wa_POITEMX-TAX_CODE = 'X'.
                      wa_poitemx-MATL_GROUP = 'X'.
                      wa_poitemx-short_Text = 'X'.
                      wa_POITEMX-ACCTASSCAT = 'X'.
                      wa_poitemx-ITEM_CAT   = 'X'.
                      wa_poitemX-pckg_no    = 'X'.
                      append wa_POITEMX to it_POITEMX.
    Please guide.
    Regards,
    PK

  • Cost center not updated when posting in non leading ledger

    Hello FI Experts
    I have two ledgers - Leading and Non Leading Ledger.
    When I posted expense entry it updated both the ledgers and updated cost center value. This updated value i checked in cost center report KSB1.
    For Ex: Rs. 1,00,000
    Now I posted another expense entry in non leading ledger only. For Ex: Rs.50,000
    How ever this entry didn't updated cost center report value. I checked in report KSB1
    So I want to know:
    1. Are there any cost center reports / profit center reports in controlling module where I can get non leading ledger specific amount in cost centers and profit centers
    2. Is it possible to run assesment and distribution cycle, cost reposting and other CO transactions for non leading ledger amount
    Deepak

    Hi Deepak.
    You can verify is the cost center was posted on document running tcode SE16N on the FALGFLEXA table, put the document number to do research.
    After you can trying to post the new document through Tcode FB50L choosing or not a legder specific, then verify the document was posted correctly running the Tcodes SKb1 or Se16N with FAGLFLEXA table again.
    Also you can check this link Checking the Allocation of General Ledgers to Cost Centres
    Kind Regards
    Jandoval Nascimento

  • Overhead Cost Element not update

    Hi,
    I have created Cost sheet , assigned to Production plant, for FG Material,
    Overhear updated when run SCE, and production order also updated but after settlement secondary GL a/c with Credit cost center not update. in system show no value in particular overhead
    Please help me
    Thanks & regards.
    Vinu.

    Hi Ajay,
    Yeah I have maintained  inventory valuation (Fixed and variable costs)
    overhead cost should be calculate, Fixed and variable cost so i have maintained (Fixed and variable costs)
    in cost sheet i have maintained only plan rate  not actual.is it ok ?.
    Thanks & Regards.
    Vinu,
    Edited by: vinutha1010 on Oct 25, 2010 7:37 PM

  • Cost center not committed on shopping cart,  for account assign cat "Asset"

    Hello,
    We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
    While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as “Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
    We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
    Can someone please help me with this issue?
    Thanks,
    Krupa

    thanks Ramakrishna and Yann for your prompt reply..
    Ramakrisha,
      I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
    Does anybody have any clue why this might be happening?
    Thanks,
    Krupa

  • Item text (BSEG-SGTXT) is not getting updated in Payment document generated

    Hi All,
    Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
    After generating the payment document via Transaction Code u2013 F110, system is not updating the
    Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
    In case of manual payment (F-53) we can input the text manually hence that will get updated in
    payment document but this thing is not possible with F110.
    How can I update it?
    Is there any configuration for that?
    Thanks
    Daniel Dorta

    Hi All,
    I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
    Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
    Thanx in advance.

  • Cost Center and G/L Account not defaulting

    Hi Experts,
    We are on SRM 7/ECC6
    I am creating a free text SC...I give the product category and expect that cost center and G/L account will default in the account assignments tab, but they don't and I have to manually plug in these values. I have maintained appropriate SPRO settings where I have linked my product category and G/L account and also marked the default checkbox.
    Kindly suggest,
    Best Regards,
    John

    Hello John,
    In SPRO configuration
    "Define G/L Account for Product Category and Account Assignment Category"
    Maintain the configuration like
    Category ID    Source Syst.    AcctAssCat       G/L Account    Default
    0000030         TRXCLNT750    CC                      15190001         x
    Don't forget to maintain Source System and Default fields for this setting.
    Regards
    Thiago Salvador

  • Cost center not picked up in the APC posting for Asset

    Hi,
    The account assignment object KOSTL is active in system, with the below settings.
    and below is the transaction type specific settings.
    in the posting key and the GL accounts Field status groups, the cost center is optional and activity type is also optional.
    In Asset master the cost center is maintained.
    But while doing the Asset Acquisition postin the cost center is not updated in the document.
    It was expected that the cost center will be derived from asset master and would have reflected in the 1st line item.
    Please help me understand, if some other configuration has to be looked at for this perticular issue,
    Regards
    Rudra

    Hi Ganesh / Rudra
    CC in Asset Postings has a purpose
    Since no Profit Center is directly maintainable in Asset Master atleast until EhP4 or 5, the PC in Asset APC line item was derived through the Cost Center or Internal Order maintained in Asset master
    For that reason, your asset APC account must be created as Cost element, even though it is a Balance sheet account.. The cost element category will be automatically 90 - Statistical Cost element
    Check if the APC account is made as Cost element or not.. That would be the reason most probably
    Hope it is clear
    Br. Ajay M
    PS :- I heard that from EHP5 or 6 PC can be directly maintained in Asset Master.. I have not seen it yet, so i cant comment on it

  • No accounting document generated in billing

    Dear Experts,
    I have created one header condition type ZD00 for freight charges in pricing procedure and assigned Account key ERF.It is calculating in Billing but when I am trying to save the billing it is throwing a message "Document 9310000061 saved (no accounting document generated)Message no. VF050".I have checked VKOA transaction where ERF key is assigned with customer & Material group with GL account.I am not able to find the problem .It will be great help if i get the solution.
    Thanks & Regards
    Rahul Sharma

    hi
    please go to check this areas
                1.G/L account is maintain or not
                2.account assignment of customer master
               3.account assignment of material master
               4.account keys in  check T-code VKOA
               5.profit center
               6.cost center
               7.posting period and number ranges
    check all
    rgds
    venkareddy

  • No accounting document generated at time of result analysis settlement

    No accounting document generated at time of result analysis settlement, but controlling document and profit center document are generated. problem is cost has been settled but accounting does not generated.

    No accounting document generated at time of result analysis settlement, but controlling document and profit center document are generated. problem is cost has been settled but accounting does not generated.
    i am asking at the time of  WIP calculation or settlement
    cost can be settled but does not generated any accounting document .

  • No Accounting Document generated for goods issue in case of MTO scenario

    Hi all,
    I have MTO scenario & the industry is trading. So I have all trading goods. In SPRO - Sales & Distribution - Availability Check and Transfer of Requirements - Transfer of Requirements - Determination Of Requirement Types Using Transaction I have determined requirement type as KE.
    In material master I have used strategy group as 20 for Make to order scenario. In the settings "Determination Of Requirement Types Using Transaction" I have determined the requirement type as "KE".
    The requirement type "KE" determines a requirement class "040 - MkToOrdNoValW/o cons". Here the account assignment category is "E-Ind. cust. w. KD-CO".
    Now I created a sales order, the system determined the requirement type as "KE". I saved the sales order, assigned the stock to the sales order  & created a delivery.
    I did the PGI also. But when I check in the document flow, for the material document the system has not generated any FI document where we see the accounting document for the "cost of goods sold" & "inventory" G/L accounts. The system gives a message "Material document 4900000023 does not include an accounting document".
    Note:
    1. When I create the sales order with normal MTS scenario, the system creates an accounting document for the material document at the time of goods issue.
    2. The valuation class in the material is 3100 for trading goods.
    3. The following settings have been made in OBYC.
    for GBB, the G/L accounts have been assigned for general modifier "BSA", "VAX", "VAY" & "VKA".
    Please suggest me as to where i am missing any settings.
    With best regards,
    Niyaz Sayyed.

    Dear Niyaz Sayyed
    You need to check in the following areas:-
    -  check whether the material is defined as non-valuated stock
    -  go to OME9, select your Account Assignment and see whether you have checked the box "GR non-valuated".   It should not  have been checked
    thanks
    G. Lakshmipathi

  • VF01  Issue: no accounting document generated

    Dears,
    While Billing the Down Payment (VF01) in ETO case of IDES, the system issued a message: no accounting document generated. So the payment data can not be updated. Does anyone know how to solve this problem?  Thx!

    Hi,
    If the accounting document is not generated there might be couple of reasons.
    To know the reason
    Goto change mode of Billing document VF02, and goto top left corner menu, Billing document -> Release to accounting.
    Then you will get the reason why the accounting document is not generated.
    The reason might be
    1. Revenue Acc. Determination is not done properly
    2. Or the G/L account which you maintained might not be maintained properly.
    hope it is useful. Reward the points if found useful.
    Get back in case any help is needed.
    Thanks!

  • No account document generated upon MR21

    Hi there,
    My user has actually perform MR21, but no accounting document generated after the change of the valuation cost. This is to change the business model from consignment stock to own stock.
    What is the t-code to view the posted price change document? Is there any special step required for the changing of the abovementioned business model
    Thanks.
    Regards,
    Edwin

    Hi Edwin Fu,
    MR21 t-code is used to update the Standard Price(S) or Moving average price(V) in the Material master. Once you perform MR21 and change the Price, You can verify the new price is displayed in the Mateiral Mater accounting view.
    Once the above is confirmed , you perform the movement of 311 ie. consignment to own stock.
    The FI document posted will carry the new price you have define.
    P.S: Please ensure that you udpate the correct price before performing 311 mvt type.
    Please reward if useful.
    Thx,
    MJ

Maybe you are looking for