Cost center relationship in PCH logical database
Hi Experts .
According to what I knew theoretically ,
External objects such as cost centers or users do not store data in the PCH logical database .
But I created a position and Idid a cost assignment using relationship A11 to a cost center and went to SE36 and ran PCH for the selection of current plan version and object type K and object id of the cost center .
After running for the evaluation path KOSTDIUP ( Account assignment usage ) , I could see the relationship of cost center with the earlier created position .
So if relationships of cost center are not supposed to be in PCH logical database , then how come I can see the above result ?
Thanks
Rishabh
This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
The Organizational Management uses the PCH logical database
so S-Position is an object in OM, you can see the relationship.
correct me if i am wrong !!
regards,
mohammed
Similar Messages
-
Screen in PCH Logical Database
Hi
Can i change the screen selection of a PCH Logical Database?? is possible do it??
Regards
GregoryHi, Gregory Gotera
Please have a look at the following Thead hope it will solve out your problem,
[Hide Screen Element|Text based search on Z ABAP table;
Please also follow the following Thread too to find the name of the field,
[To find the name of the Screen Field|Selection screen + hiding selection parameter adn adjusting elements;
Please Reply if any Issue,
Kind Regards,
Faisal
Edited by: Faisal Altaf on Jan 19, 2009 9:40 PM -
PCH Logical Database - Set stucture conditions
Hi All,
Can anyone tell me what is the use or how to use the Set structure conditions in PCH logical database.
Best regards,
AravindHi Sachin,
If you use PCH logical database in a program, on the selection screen you will see a button called Set structure conditions, by which you can enter some conditions.
I was wondering how to use the same.
Regards,
Aravind -
Is there any config for plant-cost center relationship
looks like our new cost center is not defaulting on the PO accounting document. Is there someplace I should have set-up a plant/cost center relationship?
Thanks in advance
SatyaHi Satya,
You cannot directly assign a Cost Center to a Plant. But indirectly yes. A Cost Center is assigned to a Profit Center, a Profit Center is assigned to Material Master and the Material Master to a Plant.
Hope this clarifies.
Regards
Sridhar -
Cost center relationship with department
Hi experts,
I have one question to ask about cost center relationship.Let say one department use only one cost-center. Is it I have to key-in the relationship between department and cost-center only or I have to key -in all the position in that department with the cost-center.If I don't keyin the relationship between position and cost center, how about the report. It will automatically appear or not.HI MJ,
Please assign the Org Unit to a Cost Center using A011 Relationship through IT1001.
Secondly, the principle of Inheritance works here.....i.e.
IF you have assigned a O-K relationship at the Org Unit Level, all the reporting Org Units & Positions will inherit the Same Parent Cost Center........except in cases where the O-K / S-K Relationship is changed for any other org Units...or Positions... in such cases, the reporting org units or positions will inherit that.....
Cost center assignments are inherited along the organizational structure.
Hope it is clear...
Good Luck !!!!
Kumarpal Jain. -
Difference between PNP and PCH logical database
WHats the difference between PNP nd PCH? When to use which??
TxHi,
The Difference is only with in an SAP R/3 system in which Concurrent Employment is active, reports are executed by the PNPCE logical database. The general logic of the PNPCE logical database corresponds to the PNP logical database. The PNPCE logical database can also process the concept of Concurrent Employment.
HR Logical Databases
In Human Resources (HR), the following logical databases can be used as a data source for HR InfoSets:
PNP (PNPCE)
PAP
PCH
By selecting a logical database, you determine the HR data that can be reported on using an InfoSet.
Logical Database PCH
This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
Logical Database PNP (or PNPCE)
Use logical database PNP to report on HR master data. It is possible to use logical database PCH to access this data, but PNP meets such reporting requirements more quickly because it is best suited to the task of selecting persons.
Logical database PNP enables you to access HR master data and infotypes from Personnel Planning. For example, you have the following options:
Reporting on the costs, number of attendees booked, and instructor for a business event on which an employee is booked
Reporting on working time and planned compensation for a position that an employee occupies
Reporting on the validity and proficiency of a qualification that an employee fulfils
From a technical perspective, this means you can use PNP to report on all of the infotypes that exist for objects (infotype 1000) that have a direct relationship (infotype 1001) with the Person object.
The ability to access infotypes from Personnel Planning using logical database PNP is a special feature that you can only use in the context of SAP Query and Ad Hoc Query. You cannot use this functionality for ABAP reports you programmed yourself.
You can also use logical database PNP to report on data from Personnel Time Management (infotypes 2000 to 2999) and Payroll (special payroll infotypes for the USA and customer infotypes; for more information, access Customizing for the Human Resources Information System and see Payroll Results).
Logical Database PAP
Logical database PAP enables you to access data from Recruitment.
Check this link for more details
http://help.sap.com/saphelp_erp2004/helpdata/en/e1/e1f83f6e5a11d687620000e82158f1/frameset.htm
<b>Reward points</b>
Regards -
Cost center integration with HR - logical system for CRT inconsistent
Hi there,
we are distributing Cost centers from our SAP ERP system to another SAP HR system via ALE [COSMAS01 basic type].
The cost center created in target system contains information about source system logical system name - table CSKS, field LOGSYSTEM.
This is causing problems in Travel Managment in SAP HR system, where we get the error: Logical system for CTR inconsistent.
Cost centers created/changed in HR system does not contain any value in CSKS-LOGSYSTEM field and work fine.
Any ideas how to solve this issue?
For now to fix the issue, user needs to do a phony change in SAP HR system to get rid of original LOGSYSTEM value.
I am thinking about removing field E1CSKSM-LOGSYSTEM from COSMAS IDoc but I gues there must be simpler soloution.
Thanks for your advices,
IgorIgor :
I think this has something to do with matching logical system with controlling area in TKA01. Another option for cc's logical system to have no values when outbound ALE is to config V_TKA01_ALE (so it will be transported to the system that has cc ALE to other systems) to have field 'ALE Distribution Method' blank (No distribution to other system).
This way, when SAP is creating outbound idoc for COSMAS, field CSKS-logicalsystem will not be populated (logic is in SAP 'MASTERIDOC_CREATE_COSMAS' , around line 86).
Rgds. -
Org Unit to Cost center relationship issue
Hi All,
When I assign a Cost center to an Org Unit, i dont have any issues and got created. But when I assign the same Cost center to a different Org Unit, it delimits the previous Org relationship and creates the new one.
I checked the Relationship A011 time constraint and it is 2 which is with gaps.
This is strange and should not work in this way.
Thanks in advance.
Cheers
VijayThanks a lot guys.. I found the answer...
Cheers
Vijay -
Changing Company Org. Unit Cost Center Relationship
I need to know the best method for changing an assignment of Personnel Area to the Company without impacting the OM structure and historical data. We are moving a Personnel Area to another Company. I'm unable to change Cost Centers on the Org. Units or reassign the Org Units to the company because their are still individuals on the PA side that have infotype 0001's that are linked. I would like to change the Company to PA relationship on the Enterprise Structure/Change the Account assigments to reflect the new Company relationship to the existing Org Unit, change the Cost Center assignment and regenerate the Infotype 0001. However, I'm getting error messages that tell me that I can't do this. Is there a sequence here that needs to be run.
Thanks,
KeithHi Suresh,
Thanks for the help. I am working on the BADI HRBAS00INFTY -
Create Cost Center relationship usin SAP-PD
Hi all,
SAP_PD is allowing to deal only with O, S and C object. How we can create new relationship to Cost Center (K) using SAP_PD.
Any ideas?
Thanks,
Oleg
Edited by: Oleg Sokolov on May 26, 2010 2:26 PMYou can 'start' an SAP_PD service with an Position, Job, or Org Unit. But you can update ANY relationship to that object (even cost center). Play around with it a bit and I'm sure you'll stumble up on the solution.
Derrick Banks
Banks & Company, LLC -
Profit center accounting and cost center relationship
Experts, in the future as we look to tie the PCA cube with the CO cube, the referential integrity will be important. What I see as being important is capturing the profit center, cost center and account that was used at the transactional level and not from an arbitrary hierarchy. As such, in the PCA cube, it would be optimal to have the cost center assigned to the transaction be available. This assumes that the PCA totals are by profit center, cost center and account. Furthermore, I will want to build a jump target from the PCA cube to the CO cube where we can see this data by cost center and cost element or vice versa. There seems to be some uncertainty on if the PCA cube has the cost center informaiton, so how would I do this?
I don know if i understood it correctly but If you assign you profit center in your cost center you should be able to get all that you need.
Assign points if helpful -
Routings/Work Centers to Cost Center Relationship
Hi,
For routing, work center and cost center master data setup, is there a limitation on the number of:
Routings to cost centers?
Work centers to cost centers?
I want to find out if there are only a certain # of routings allowed when tie to a cost center, and same with work centers.
Thanks,
AliceHi,
Routing
A routing is a description of which operations (process steps) have to be carried out and in which order to produce a material (product).
Thus in routing contains details about the work centers at which they are carried out, standard value and component.
Therefore there is no limitation for assigning number of time for same work center.
Regards
Suresh -
Can anyone tell me how to read objects with planned status using PCH ldb.
Only objects with Active Status are read at Get Objec Event.Is there any specific reason that you cannot control the field?
Could you possibly add you own custom field to the selection screen for object status? Then before your get statement, you could populate the standard select option with the value from your custom select option.
Regards,
Chris H. -
Position to Cost Center Relationship with time constraint 1
Hi,
I have a situation wherein:
1. There exists 2 records in PP01 with S-K relationship e.g. 01.01.2013 to 28.02.2013 and 01.03.2013 to 31.12.9999
2. There is a requirement to create another S-K record with dates; 01.02.2013-28.02.2013 automatically delimiting the first record.
Hence in all three records should exist
But when i try creating the 3rd record with end date 28.03.2013, it gives an information message stating End Date corrected to maximum end date of 31.12.9999. Thereby over writing the previous record(2nd one)
Do I need to change time constraint? Time constraint 1 should ideally allow this, as my records do not have gaps and exist at all times.
Please guide me through.Hi Rohan,
Please check the table V_T777ZVK and the time constraint between S and A011 it must be 02 as per the standard system.
Then time constraint 2 means a maximum of one infotype record of the same type for the same object at the same time.
So if you change then end date must be 31.12.9999.
Regards,
Mithun K -
Do we have macros which we can use for the Logical Database PCH
Dear Friends
I would like to know when we are using the
Logical Database PCH .....do we have any macros
for getting latest record etc.
i.e i mean to say the macros which we use
Rp-provide-from-last in PNP logical Database
do we have same facility in PCH logical database please let me know
regards
madhuri.hi madhuri,
we use same macro.
instead of get pernr .
in pnp here we give
GET OBJEC.
use this macro
PAP_PROVIDE_FROM_FIRST P0001 SPACE PA$BEGDA PA$ENDDA
PAP_PROVIDE_FROM_LAST P0001 SPACE PA$BEGDA PA$ENDDA.
regards,
sandeep patel
Edited by: Sandeep patel on Jul 4, 2008 1:33 PM
Maybe you are looking for
-
ITunes does not sync with iOS5 iTouch
After I updated my iPod Touch to iOS 5, and simultaneously iTunes to version 10.5, they have not synced. When I connect the iPod to my Windows 7 PC, iTunes opens, recognizes the identity of my iPod, and begins to sync, saying "Syncing iPod (Step 1 of
-
Re: JDS on Solaris 10 Summary: Dumbed down does not mean easier. I don't think I have ever, in 15 years as a Sun customer, hated anything as intensely as I hate the Java desktop! Hate it, hate it hate it hate it! 1) Launch menu - cryptic names for th
-
forms, made one in Pro X, to be used by someone in Reader where can I find line spacing capabilities - (form is then enabled to use in Reader) looked all over for hours to find answer and nothing* set font at Helv 9 point and the line spacing looks a
-
Trouble with Booklet Printing in OSX 10.6
I recently ran an update for OSX 10.6 and ever since then, when I select the booklet print function, the print image does not rotate. In other words, the preview shows the document in a landscape format, but rotated to print as portrait. However, whe
-
I can't install my MC344LL/A on my MacBook Air running Lion
Hi all... I got a Time Capsule, model MC344LL/A. I put the disc in & it says I cannot install it on my computer running Lion. I searched for any time of update, but I cannot figure out what the heck I need. Can anyone help me install this pleas