Cost Center Translation

Dear Friends
Does Any one know where can I translate cost center description
and cost center short text in table CSKT fields LTEXT,MCTXT
Thanks in Advance for your help Kobi
Regards

it's didn't worked
I added translation in DE then I relogin with lang. DE I didn't saw
the translation in German
But when I went inside I required to insert the Desc in German this worked
for the browser

Similar Messages

Cost center creation in Batch

Hi All,
I need to create lot of cost centers. Is there any way to create them in batch. If there is a way, please let me know step by step procedure for the same. Thanks in advance.
Regaards,
S.Sumana

Hello,
There is no readymade document for cost center.
The logic is one and the same. You need to complete the following steps:
Please take help from ABAPer.
In recording you have to complete the following steps:
Maintain Object Attributes
Maintain Source Structures
Maintain Source Fields
Maintain Structure Relations
Maintain Field Mapping and Conversion Rules
Maintain Fixed Values, Translations, User-Defined Routines
Specify Files
Assign Files
Read Data
Display Read Data
Convert Data
Display Converted Data
Create Batch Input Session
Run Batch Input Session (Takes you to SM35)
Please let me know if you need any further help.
Regards,
Ravi

Cost center plan values and Profit center plan values are not matching

Hi,
When user drill down the costcenter plan costs by partner in production system getting difference between P center values for a perticular functional area.
But this number should match with Cost center and P center functional are values but there under functional are showing lower amunts.
Pls let me know where exactly i have to check because i am fresher for controlling.
Please help me out.

Hi Anil,
If I understand your requirement then you want to plan both in USD and INR at the same time.
Say you maintain rate as 1 USD = 50 INR
Do you want to plan for 100 USD and 480 INR against one combination (Cost Center / Cost Element) and 100 USD and 520 INR against another combination of Cost Center / Cost Element?
SAP allows you to plan for a Cost Center / Cost Element combination only once. And that you can plan in any currency. Either in CO Area Currency or Object Currency (in this example Cost Center Currency) or in Transaction Currency (any other currency that you may choose). And the other currencies gets derived from the Exchange Rate maintained in the system using OB08 tcode. The exchange rate will be derived using the Planning Version "Exchange Rate Type" and "Value Date" (See Fiscal Year settings for Planning Version).
So, if you plan in INR it gets translated to USD and vice versa. For planning in different currencies (only one is allowed) you need to change the planning layout to include the Amount Currency field.
So for a single version say V1 you can plan in INR which gets translated to USD using OB08 exchange tare. Again you can plan in version V2 in USD which will get translated in INR using the same OB08 settings but you need to use a different Exchange Rate Type for V1 & V2.
I am not sure what the business requirements are. If the requirements are only to display different currencies in a report then that can be achieved by creating a Report Painter report.
Hope this helps.
Thanks,

What is cost center

please tell me about
COST CENTER in sales & distribution

hi venu,
Cost centers are divisions that add to the cost of the organization, but only indirectly add to the profit of the company. Examples include Research and Development, Marketing and Customer service. A cost centre is often identified with a speed type number.
Because the cost center has a negative impact on profit (at least on the surface) it is a likely target for rollbacks and layoffs when budgets are cut. Operational decisions in a contact centre, for example, are typically driven by cost considerations. Financial investments in new equipment, technology and staff are often difficult to justify to management because indirect profitability is hard to translate to bottom-line figures.
Business metrics are sometimes employed to quantify the benefits of a cost centre and relate costs and benefits to those of the organization as a whole. In a contact centre, for example, metrics such as average handle time, service level and cost per call are used in conjunction with other calculations to justify current or improved funding.
I have taken this definition from wiki for your reference.
Regards....
Arun.
Reward points if useful.

BW Analysis authorization issue on cost center range

Hello BIW security experts
I have a problem where I created an analysis authorization on a cost center range and it looks like the interval is not working. The report is just a list of cost centers (demo to users to prove that analysis authorizations work in order to skip 2 managerial cost centers.
. Cost centers are numeric. Example: 2000100. In the drop down list they appear as such.
. I want to have the following cost center range: 1000000 to 1000771, 1000773 to 2000771, 2000773 to 9999999.
Thereofore 1000772 and 2000772 should not appear in the list.
. In the analysis authorization I have put the 3 ranges above on 3 separate lines. 'BT' is the operator. The cost centers have been selected from the drop down list.
Results: I get only 1 record from the report.... 2000772. (which is one I want to exclude..
Steps tried to debug:
. When I put a list of cost centers in the analysis authorization on separate line with the 'EQ' operator, then the report works.
. I tried putting ' ' delimiters since cost center is a char field but it fails.
. I tried adding leading and trailing zeros to fill up the char(10) but no luck.
. I tried creating a hierarchy with the interval and put it in the hierachy auth. tab and it does not work either. It gives the same number of records than the first step.
. A hierarchy with single values work.
I do not know what else to try..
Thanks.
YB.

Good morning
Here it is from RSECVAL
ZCC_TEST     0COSTCENTER                    I       BT        1000000                                                      1000771
ZCC_TEST     0COSTCENTER                    I       BT        1000773                                                      2000771
ZCC_TEST     0COSTCENTER                    I       BT        2000773                                                      9999999
ZCC_TEST     0COSTCENTER                    I       EQ        #
ZCC_TEST     0COSTCENTER                    I       EQ        :
ZCC_TEST     0INFOPROV                         I       CP        *
ZCC_TEST     0TCAACTVT                        I       EQ        03
ZCC_TEST     0TCAIPROV                         I       CP        *
ZCC_TEST     0TCAKYFNM                       I       CP        *
Thank you for your help.

Error in creation of Cost center

Hi All,
Trying to create Cost Center through KS01, however I am getting an error as "No compnay Code assignemt to the Contrilling area TS". can anyone please explaine me on the process to chek this error.
Bharath

HI Bharath,
Please check the spro seeting for this error.
spro -> enterprise structure - > Assignemtn - >controlling - > Assign Company Code to Controlling Area.
Please check whether the required Company code has been assigned to the Controlling Area. If not please assign the required and check or the same.
Please note: A company code can be assigned to one controlling are only
Regards,
Madhu Sudhanan

HR PNP Logical Database Using Cost Center selection: error!?

Hi all,
I'm using PNP logical data base and using the selection-fields available through HR Class Reports (a copy of PAY_DEF) but what happens is if in selection-screen I fill the personnel number say 1000, i get the payroll data I'm trying to get, but if i use the search field cost center of that exact person i get nothing. Does anyone has a clue on what i might be doing wrong? Because all the other search fields work, company code, HR area, everyone, but cost center, and I'm positive that i use the right cost center.
Thanks in advance,
Paula

Even though nobody answered me, i finally found the solution for my problem. so and because someone might need it here it is:
Go to Spro->Personnel Management->Human Resources Information System->Reporting->Adjusting the Standard Selection Screen and then:
1st Create Report Categories and
2nd Assign Report Categories
Since not all rep. categories on the 1st assignment is explicit on how will sel screen appear i advice you to go to the 2nd point, and execute some of the programs that appear there, and that might look alike to what you are looking for, and if you are so lucky as to find one exact use the same report category in your program, if its very alike, well, copy the Report Category into one of your own and change it the way you need it to be.
Hope this be helpfull for someone.
Paula.

1_CO_PA_AFS_CCA(cost center accounting) DS enhancement

hi friends,
i'm trying to extract COPA : Profitability Analysis data using 1_CO_PA_AFS_CCA(cost center accounting) to custom cube directly(i.e Data source to custom cube without any staging in between datasource & cube).
In ECC6.0 (tcode: CK40N and then costs ), per material wise i want to extract labour costs, deprecision, power & fuel, sub contract charges,other manufacturing costs along with this i want to extract i field information "costing lot size".
I want to extract "costing lot size", but data source doesn't have this field. Is it possible to enhace DS.
If yes, how to do that?
Thanks,
naresh

Hello Shruti,
Can you give more explaination about the problem
Thanks & Regards,
NK.A

BI-IP Authorizations: Accessing own Cost Center only

Hi,
We are currently implementing BI-IP in our company. We have created the ready-input templates and we are prepared for roll-out.
There is still one concern though which I haven't resolved. I am currently looking for an AUTHORIZATION that will let users access their respective COST CENTERS only. For example, if I am part of the Marketing Group, then I will only be able to access the budget of my respective cost center.
Can anyone lead me to the right AUTHORIZATION OBJECT in BI-IP to implement this restriction.
Your reply is much appreciated. Thanks.
Regards,
Ramon

Hi Ramon,
authorizations for transaction data in BI (and therefore in BI-IP) are not based on authorization objects. You have to make the cost center InfoObject authorization relevant and then create so called Analysis Authorizations for it. Please see the online help:
http://help.sap.com/saphelp_nw70/helpdata/en/66/019441b8972e7be10000000a1550b0/frameset.htm
BTW, you can upload the cost center authorizations from SAP R/3 or ERP.
http://help.sap.com/saphelp_nw70/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
Regards,
Marc
SAP NetWeaver RIG

Add Option of choosing values from list in "Person Responsible" field of Cost Center Master

Dear All,
Could anyone advise me how can I add the option to Choose Values from list to field "Person Responsible",
in Cost Center Master Data ?
The Technical Name of this field is VERAK, and currently it is an open field.
I would like to allow the user to choose values from existing list.
Thank you!
Orly

Hi Orly,
You have take it to your ABAPer, who will have to modify the attributes of CSKSZ-VERAK field in CSKSZ structure. ABAPer will have to define it with foreign key and introduce the name of the table, which will be used for deriving the available values. No standard table exists for it, but you can either create your own Z-table or take it from users table (USR02) if you have the necessary information there. Of course, this action would account for modification of standard SAP structure.
Regards,
Eli

Update cost center

Hi All,
Greetings,
I need your valuable suggestion urgently.
The Business user would like put additional business rule to populate the cost center based on transaction id.
Currently All the cost center by default are populated ‘000’ for all the Transaction Id for GL Customization.
Now business wants to update cost center '000' to something '123' based on TXN CODE ID.
Here Transaction code will be used with business rule to create Journal Entry.
Please guide me/ answer me to the following questions.
1. can we replace (update) the cost centre code.
2. Incase we update the cost centre will there be any other impact like finance, GL etc.,
3. Any additional information to be considered before replacing the cost centre code.
As the matter is most urgent. I request you to reply on priority basis.
Thanks in advance.

Hi,
Thanks for your valuable information.
Actually i am a technical guy and new to the functional.
Could you please provide the steps to update the cost center for subledger.
Thanks in advance.
Edited by: 983909 on Feb 5, 2013 5:58 AM

Is there is a way to have a link from purchase order to cost center report.

Is there is a way to have a link from purchase order to cost center report.
I am meaning kind of:
Standard way to customized this link?
or
User exit to have this link in place
or
Any other solution
Thanks

For me it does not make any sense from going from PO to cost center report.
However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

Assignment of Cost center to G/L account

Hi,
While Posting, I am getting the following error " G/L account requires an assignment to a CO object"
Where Do I assign the cost center to the G/L and why doesn't the system automatically pick the cost
center?
Regards,
Ally

First, if G/L account was created in FI, you can only create primary cost element in CO.
Secondary cost element can only be created if no account exists in FI.
Second, if you created the primary or secondary cost element in CO, you have to assign CO account assignment.
You can delete cost element in CO (KO04) if dependent objects found.
Third, when you create cost element in CO, documents would be also created in u2018Cost center accountingu2019 and u2018Profit center accountingu2019 when posing in FI. If no cost element exists in CO, no related documents would be created in CCA and PCA.

COST CENTER CHANGES FOR OPEN PO REQUIRE BEST APPROACH HOW TO DO IT

Dear All,
we are changing the cost center for open PO's kindly tell us the best approach how to do it for all open PO's line items for open PO's are 4000.
we will totally block the old PO's and change the PO's with NO GR and IR immediately, but what and how to do for if there are GR, IR, or one of them their. and also what if IR and GR differences are thier, kindly provide all the best possible approaches.
below are the scenarios.
Open PO without GR/IR
Open PO only with GR
Open PO only with IR
Open PO with IR/GR without difference
Open PO with IR/GR with differences
Service entry sheet
kindly provide me all the best approaches to achieve this task. keep in mind beside reversal of GR or IR any other approach.
qsm sap
Edited by: qsm sap on Feb 15, 2010 12:08 PM

Hi,
Open PO without GR/IR
Open PO only with GR
Make Acct assigment as changeable at time of IR in SPRO for Acct Assigmet 'K' ...so that u can change the cost Center while doing MIRO. if u do not want to go with mass change.
Service entry sheet
You can change Cost center while Doing SES. No issue
for others... reverse the IR as one option.
Regards,
Pardeep Malik

COST CENTER CHNAGES FOR OPEN PO"S BEST APPROACH

Dear All,
we are changing the cost center for open PO's kindly tell us the best approach how to do it for all open PO's line items for open PO's are 4000.
we will totally block the old PO's and change the PO's with NO GR and IR immediately, but what and how to do for if there are GR, IR, or one of them their. and also what if IR and GR differences are thier, kindly provide all the best possible approaches.
below are the scenarios.
Open PO without GR/IR
Open PO only with GR
Open PO only with IR
Open PO with IR/GR without difference
Open PO with IR/GR with differences
Service entry sheet
kindly provide me all the best approaches to achieve this task.
qsm sap

Hi,
Open PO without GR/IR
Open PO only with GR
Make Acct assigment as changeable at time of IR in SPRO for Acct Assigmet 'K' ...so that u can change the cost Center while doing MIRO. if u do not want to go with mass change.
Service entry sheet
You can change Cost center while Doing SES. No issue
for others... reverse the IR as one option.
Regards,
Pardeep Malik

Cost Center Translation

Similar Messages

Maybe you are looking for