Cost Centers & Org Unit

Hi Gurus
can anybody tell me how to get Employees Const centers and Org Units
Thanks & Regards

Hi srinivas,
Go to the particular orgunit in which the employee is currently there.
Place the cursor on the posion and choose account assignment from the goto menu on the top.
Now go to the same position and choose master cost center from the menu and key in ur cost center number and company code details along with start date and end date.
Follow the same procedure by placing the cursor on the org unit if u want to assign the cost center to org unit and not the positon.
let me know if this was ok.
Ayyaps
Edited by: Ayyaps sukumar on Oct 26, 2009 10:12 AM

Similar Messages

Cost Center, Org.unit is wiped out

Hi All,
When i terminate any employee using PA30 or PA40 transaction then it wiped out cost center and Org.Unit. We need this details. Kindly let me know if you know the solution to keep the cost center and Org.unit when you terminate the employee using PA30 or PA40 transaction.
Thanks,
-Suresh Revuru

Yes i verified the pa0001 infotype. After terminating the employee it is clearning the cost center, org.unit and Job for existing record and new record.
Example: When i hire a employee 1234 i will give cost center, position, job etc.,
If i terminate the employee using PA30 or PA40 then it will create a new termination record in infotype pa0000 and pa0001 etc., This new record the cost center, job and org. unit in infotype is blank. Also it is clearning the existing HIRE recod cost center, JOB and ORG. unit.
Thanks,
-suresh

Cost Center & Org Unit

Hi Guys
is there any transaction or report to know if a particular cost center (K) has relationship with how many / or which org units?
thanks
W

Hi William,
Try t-code S_AHR_61016528 with object type K, object id = cost center id, evaluation path B011.
Regards,
Dilek

Can cost center / org unit assignment be done @ Position level?

NW
Edited by: NW on Jul 17, 2009 2:29 PM

Technically, I don't see why not. However, it would probably be much more cumbersome to maintain at position than at org level. Also, a new hire ee would have to be assigned to an org, but may be assigned to a dummy position earlier on. This would mean there's more risk for IT0001's record not to have cc populated . It's just my 2 cents.
Rgds.

Cost center and org unit missing in payroll report

Hi Gurus,
Our HR administrator has moved a position from one org. unit to another via PP01 - she has done this via a change action and not copy thus the record went missing and caused staff for that position with no Cost Center & Org Unit.
Although the position has been reinstated back to the old org. unit, and relationship shows correct cost center and org. unit - still the payroll report does not pick up the same attributes.
Please help.
Thanks,
MVM

hi ,
is the cost center data correctlly stays in 0001 infotype ?
if your connections are normal in pp01 1001 infotype , you can run rhintexx programs.

Cost center and Org unit relationship.

Hi Guys,
I need quick help from any one of you.
Actually our org stucture is like Root-> company->plants-> costcenters( deparments)- users.
so we create org unit in the structure with some 100001 and assign users for that cost center org unit , so by doing this costcenter attribute =100001will be inherited from the cost center org unit to all the users under that org unit.
but now there is a requirement for creation 1500 users and we have many such costcenter org units in the structure.
The business will provide the cost center I need to identify the org unit for that cost center in the structure then only I can assign a set of users for that 100001 costcenter. But to do that I have lots of such cost center org units.
So if there is a any table or report available in the system where I can get the details of the description ( meaning Basic data descrition) which we enter while the while creating the org unit and the Org unit number which gets generated when we save.
I would like to search for that relation .Please help me with this information.
Regards
SrujanK

Hi
I am not clear what you are asking
http://wiki.sdn.sap.com/wiki/display/SRM/DownloadExtract-Graphicaloverviewof+PurchasingOrgstructureinSAPSRM
BBP_READ_ATTRIBUTES
I/P ORG ID 5000
USER:- SRUJAN
ITR_ATTR_LIST = CNT
O/P
et_attr
YOU MAY GET LIST HOW MANY COST CENTER YOU HAVE inherited
upload cost center sap given std report to upload
B_UPLOAD_COST_CENTER_ATTRIBUTE
br
muthu

Missing Org unit from position ID

Hi Gurus,
Could you please provide additional information which I have missed out that would help resolve the issue.
Problem Statement:
Position ID XXX originally belongs to O XXXXXXXX [Sample Org 1]. When HR Recruitment administrator performed action to move structure reporting to another O YYYYYYYY [Sample Org 2], the record went missing as the action done was CHANGE instead of COPY. This had caused two ex-staff showed no Cost Center & Org Unit. Now, user is trying to reinstate S XXX to O XXXXXXXX [Sample Org 1] but is prompted with an error message - Company code cannot be determined for cost center 52222.
Action Taken:
1. Checked S 5111111 and found that it is currently under O YYYYYYYY and currently occupied by P 123456 (validity period is from 01.11.2010 to 30.04.2011)
2. Checked account assignment of S 5111111 to confirm the company where it is assigned to. It reflects that position inherited attributes O YYYYYYYY [Sample Org 2] to which the position is currently under
3. Checked account assignment of O YYYYYYYY it only contains the controlling area which is TTTT. I then checked IT0001 of the current employee who is holding the position and company code reflecting is CCC.
4. Checked account assignment of O XXXXXXXX where they want to reinstate the position and it only contains the controlling area which is TTTT and master cost center is 52222. I checked one employee under the said Org to verify to which company it is currently under and found that it is the same, CAT. At this point, I do not see any issues as to why it is not allowing them to create A003 rel to O XXXXXXXX .
Note: I was not able to replicate the error since it is working fine in dev given the same scenario.
Findings:
The only thing that I can see is on the validity date. If they are to reinstate the position to where it has been originally assigned which is under O XXXXXXXX [Sample Org 1], it should not overlap with current record since there is somebody occupying the post. If it does overlap then it will automatically delete the existing record.
In addition, I have managed to check transaction S_AHR_61016528 (B011 eval path) and found validity period of cost center to O XXXXXXXX is 01.04.2002. If user is trying to establish A003 rel for S 5111111 and validity period used is 01.01.1997. Would that matter why user is getting the said error. I have tested and was able to create rel successfully.
Would appreciate if you guys could share how else the position can be reinstated to the old org unit.
Thank you.

Hi Gurus,
Could you please provide additional information which I have missed out that would help resolve the issue.
Problem Statement:
Position ID XXX originally belongs to O XXXXXXXX [Sample Org 1]. When HR Recruitment administrator performed action to move structure reporting to another O YYYYYYYY [Sample Org 2], the record went missing as the action done was CHANGE instead of COPY. This had caused two ex-staff showed no Cost Center & Org Unit. Now, user is trying to reinstate S XXX to O XXXXXXXX [Sample Org 1] but is prompted with an error message - Company code cannot be determined for cost center 52222.
Action Taken:
1. Checked S 5111111 and found that it is currently under O YYYYYYYY and currently occupied by P 123456 (validity period is from 01.11.2010 to 30.04.2011)
2. Checked account assignment of S 5111111 to confirm the company where it is assigned to. It reflects that position inherited attributes O YYYYYYYY [Sample Org 2] to which the position is currently under
3. Checked account assignment of O YYYYYYYY it only contains the controlling area which is TTTT. I then checked IT0001 of the current employee who is holding the position and company code reflecting is CCC.
4. Checked account assignment of O XXXXXXXX where they want to reinstate the position and it only contains the controlling area which is TTTT and master cost center is 52222. I checked one employee under the said Org to verify to which company it is currently under and found that it is the same, CAT. At this point, I do not see any issues as to why it is not allowing them to create A003 rel to O XXXXXXXX .
Note: I was not able to replicate the error since it is working fine in dev given the same scenario.
Findings:
The only thing that I can see is on the validity date. If they are to reinstate the position to where it has been originally assigned which is under O XXXXXXXX [Sample Org 1], it should not overlap with current record since there is somebody occupying the post. If it does overlap then it will automatically delete the existing record.
In addition, I have managed to check transaction S_AHR_61016528 (B011 eval path) and found validity period of cost center to O XXXXXXXX is 01.04.2002. If user is trying to establish A003 rel for S 5111111 and validity period used is 01.01.1997. Would that matter why user is getting the said error. I have tested and was able to create rel successfully.
Would appreciate if you guys could share how else the position can be reinstated to the old org unit.
Thank you.

Table for Cost Centers and Org Units

Hi All,
How to retrieve the list of Cost centers and the associated Organization Units?
My HR user is in need of such list...
Can anyone help me out....????
Regards
Pavan

Hi
I dont think you can associate a cost center with org unit, it is normally associated with position/person.
You can check table PA0001 to get the cost center and org unit for a personnel number.
Is this your requirement ?
Thanks,
Shrinivas

How many cost centers can we assign to a org unit

can anyone pls tell me tht How many cost centers can we assign to a org unit ??
thanks
waiting for reply asap

Hi,
As mentioned above the common is to assign one cost center. You will see it in IT0001. But in case you need mor cost center to be assign to one employee you have the option to go to IT0027 and in there you may assign more cost centers base on different percentage.
Hope it helps.
Kind Regards,
Edoardo

How to find cost centers for a org unit ( if kost center is inherited)

Hi all
We have a org structure
When a parent org unit is assigned a kost center then the parent also inherites the kost center
I need to find kost center for all the org unit in my organization
I cant see the inherited cost center neither in IT 1001 nor 1008 nor 1015 but i can see it in PPOME in the account assignment tab.
How can i find the inherited cost centers to all the org units.
i think i am clear with my requirement to all
Thanks
Raj

Use the report RHSTRU00 in tcode SE38
and give the follwoing values in selection screen
Plan version                    01 Current plan
Object type                     O   Organizational unit
Evaluation Path               A011       All relationships to A011 -> cost
execute the report to see all the orgunits with their cost centers

Employee works for 4 org units and want to distribute the cost to 4 cost ce

Hi Experts,
I am in the implementation phase, requirement gathering.
I have scenerio where, Employee works for 4 org units and want to distribute the cost to 4 different cost centers.
so that I can be able to find the exact cost occured for each Org unit.
Please let me know how to map this in SAP?
P oints will be rewarded fully
Kindly dont post if you are not sure of your solution friends.
Thanks
Jay

Hello,
Infotype 0027 is the standard solution for multiple reporting / multi tasking in SAP.
but also check which org unit he will be primarily assigned.
Regards

Error while asssignment of Org unit to cost centre.

HI Frdz,
When I am traying to assign org unit to cost centre I got this error CALL_METHOD_NOT_IMPLEMENTED.
Experts pls let me know how to solve this error.
I maintained A\001 relation for cited above.
Thanks in advance.
Best regards,
Narayana Kaja

Check the table T77S0
When you create relationships between cost centers and positions or
organizational units in Organizational Management, the system requires
that the cost center is assigned to a controlling area, as a cost center
must always be assigned to a particular controlling area. In this case,
the value of this entry will be used as the default for the controlling
area.
Let me know if you need more information.
Thanks,
Kiran.
Reward points are appreciated.

Org.Unit & Cost Centre

Hi Experts,
We hav uploaded the Org.Units and Cost Centres Data by using BDCs but both the objects r not displaying in IT:0001.
Pls let me know your thoughts.
Thanks

Hi Rajesh,
Check weather the switch is active in T77S0 for PLOGI PLOGI to`X` to activate OM & PA integration.
Try to run Following reports:
-Using report RHINTE00, you can create objects in Organizational Management from the Personnel Administration infotype 0001 ("Organizational assignment"). In doing this, the following relationships are created:
oCost center and organizational unit or position
oPosition and organizational unit, job or person
-Using report RHINTE10, you can transfer the objects you created in Organizational Management to tables in Personnel Administration.
-Using report RHINTE30, you can update the "Organizational assignment" infotype (0001) for the personnel number you have selected, with the data you created in Organizational Management (by executing report RHINTE10).
-Using report RHINTE20, you can check whether the objects relevant for integration are set up both in Personnel Administration as well as in Organizational Management.
and also execute RHINTECHECK report to check the consistenacy of the Data
regards

Cost Center Inheritance from Org Unit

Good day all,
Can someone please advise regarding cost center inheritance from org units?
I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
Thanks guys, have a lovely day!
Christy

Hi Christy,
As we know cost centre(K) is an unusual object in OM.Two type of objects internal whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
Hope this helps.
No Worries
KG

Cost center behind an org. unit

Hi,
how can I get the cost center assigned to an org. unit ?? I am not talking about relationship A011; this works only if the relationship is available in the object´s master data. The problem is when the cost center is inherited from the org. unit above or from the one above this one or from .....
Another problem is when the position is vacant; I cannot read IT 0001 for the employee.
Is there any function or BAPI for that ??
Thanks a lot.

Hi,
thanks both but it does not help. I´ll try to explain it other way. You create in CO a cost center and you create an org. unit in HR. You can then assign 1 or more org. units to the cost center. I am looking for that union. Relationship A011 is not much of a help.
In the org. structure, a lower-level org. unit inherits the cost center from the father or grandfather org. unit, if we did not assign it to a cost center.
I don´t want to read the higher-level org. unit for finding A011 or one level higher if A011 is not available or another higher level.

Cost Centers & Org Unit

Similar Messages

Maybe you are looking for