Cost Centers related to Vendors and Customers

Hi,
We have a requirement AP and AR.
Query1 : Vendors related Cost Centers
The AP cube HFIAP_C02 is have Vendor related Sales information
Customer is asking for Cost Centers related to the Vendors.
Through which way shall I enhance my Datasource with Cost Center
Query2 : Customers related Cost Centers
The AR cube HFIAR_C02 is have Customer related Sales information
Customer is asking for Cost Centers related to the Customers.
Through which way shall I enhance my Datasource with Cost Center
Regards,
Manoj.

thanks for your reply
is there any standard user exit or BADI available for this.

Similar Messages

  • Duplicate vendors and customers

    Good morning all.
    I have a question about unique problem I need to consider. Essentially, I have merged two company codes which resulted in duplicate vendors and customers. At this point, it's easy for purchasing to select the right record, but in the future, it would be nice to eliminate the redundancy. The problem is, no computer system will tell me duplicate records as they may be entered differently. For example, customer A may be located on 123 Pleasant Lane, but it may be entered as 123 Pleasant Ln. in the other record.
    I would appreciate your feedback if you have encountered this problem and your strategy resolving it.
    Thank you in advance.
    Kind Regards,
    Sasa

    Hi,
    I encountered this situation and I cannot think of a standard tool available to get you this. Either you build a query or download the data into an excel, then sort by the name and let business identify the redundant ones and then flag those for deletion. Before you do that, make sure the settings related to the vendor/customer that you are going to keep are correct.
    You may use transaction MASS to set delete indicator.
    Hope it helps.
    Raj
    Reward points if helpful.

  • Consolidating In/Out Payments for BPs who are vendors and customers

    Hi
    We do business with a number of companies who are both vendors and customers and I am wondering if there is a better way of dealing with contra payments..
    At the moment I would do the following:
    I want to pay a supplier's November AP Invoices but they also owe us (a lesser amount) for November AR Invoices....
    1. I create an incoming payment for the amount of the AR Invoices but deposit the payment to a 'contra' account instead of our current account. (No actual funds have been received from the supplier/customer)
    2. I create an outgoing payment in the amount of the balance of the 'contra' account which pays off some AP Invoices in full and one AP Invoice in part. I choose the 'contra' account as the payment account.
    3. I create a second payment for the balance of the part-paid AP Invoice and the rest of the due AP Invoices. I choose the current account as the payment account.
    4. I send the supplier/customer 2 separate remittance advice notes along with a single cheque in the amount of the 2nd payment..
    Is there a better way of doing this which doesn't rely on me remembering to check whether a vendor is also a coustomer and whether they owe money for the relevant period before I do a payment run?
    Thanks for any advice (SAP 2007A)

    Check this WIKI, How to offset a business partner who is simultaneously a supplier and a customer?
    [https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=69861411]

  • Urgent :Relation between vendor and business area

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
    Hi ,
    Is there any table or transaction which will give an one-to-one relation between vendor and business area?
    Thnks and Regards,
    Anand

    hi
    in this situation u have to creat new  Z table and Z transaction with link of this both . it will solve ur problem . better to take abaper help other wise u can use T-CODE se11 to creat table.
    se93 for transaction code .

  • IMP: WF Events related to Vendor and Invoices

    Hi Guys,
    I'm looking for following 4 wf events related to Vendor and Invoices:
    1. When new Vendors are Created,
    2. When Vendors are Updated,
    3. When Vendor Invoices are Created,
    4. When Vendor Invoices are Updated,
    I could find 'oracle.apps.po.event.supplier_change' for vendor update but not able to find other 3 events for vendor and invoices.
    Would appreciate any inputs on the same.
    Thanks,
    Dipen

    I'm looking for BES events (events generated from standard AP and PO modules whenever changes made to vendor master or invoices)
    Any inputs would help.
    thx

  • How to app run for foreign vendors and customers please tell the steps

    hai every body this is raj
    i am asking how to create the foreign vendors and how to apprun for foriegn vendors please tell the steps
    and another questions is how to run app for customers t

    Lets say your company code is in country IN.  Every vendor you create (using XK01, lets say) with a country other than IN is a foreign vendor for your company code.  To enable APP for foreign vendors, make sure you check the checkbox 'Foreign Business Partner Allowed' in 'Payment method in company code' in T Code FBZP.  If the vendor invoice is in a foreign currency, make sure you include that currency as permitted currency for that payment method.
    To run APP for customers, your 'Payment method in country' in FBZP must be for incoming payment.

  • Change FAX number for all vendors and customers in a massive way.

    Hello,
    I need to change the FAX number for all the vendors and custormers in Q01 so that every form should output through an specific test fax-printer. The problem is that I don't know which field I should change and how can i do it in a massive way. I have heard something about catts but i don't know almost anything.
    Could you help me?
    Thanks in advance.
    Luis Álvarez.

    Hi Luis,
    Use tcode XK99 for vendor mass change, select the Fax no field. You have to take note that this changes will be only 1 fax number for all vendors.
    Else you have to use BAPI for mass change.
    regards,
    maia

  • Transfer vendors and customers from dummy profit center to other profit ctr

    Hi all
    No. of vendor /customer transactions are posted in dummy profit center-
    How to transfer from dummy profit center to other profit centers line itemwise or balanceswise
    thanks in advance
    joseph david

    Hi Joseph,
    Acturally at the end of certain period, payables/receivables will be updated with the profit center using the TCode: 1KEK.  the program searches for the profit center in opposite line item in each document and updates the payables/receivables line item with that profit center.
    But in your case you want to transfer the payables/receivables from dummy profit center to other profit center.  You can transfer the amount from one profit center to another profit center using the TCode: 9KE0.
    Hope this helps you...
    Regards,
    Sreekanth....

  • Is there a way to set off contra amounts for vendors and customers?

    Hi i would like to know whether there is a way in B1 to set off the contra amounts for a business partner who is both a customer and a vendor in B1? If so how?

    Hi Savindi,
    version 2007 fully supports multiple BP internal reconciliation, you are hence able to offset transactions of 2 separate BP codes against one another.
    Both 2007 A & B are in general availability, please see the appropriate landing page on the SMP.
    All the best,
    Kerstin

  • Enable Muliple Vendor and Customers in F-44 and F-32 Transactions

    Hi All,
    Are there any exits or BTE's which can enable entering of multiple Vaues for Vendor or Customer numbers in F-44 & F-32 transactions.
    TIA.

    Hi Hussain:
    I am sure you would have tried this option already. Just wanted to give you this transaction, in case you did not. You can try F.13 (Automatic clearing) to mass clear the vendors/customers line items. Though this transaction won't give you all the features F-44/F-32 gives but if mass clearing is the only requirement you can try F.13 for collective.
    I dont see any BTE/Enhancment on F-44/F-32 as the way these transactions work is specific to invididual account.
    Hope it helps you.
    Thanks.
    Rahul

  • Dual Control feature on Vendors and Customers

    Hi !
    The way I understand this functionality, the vendor is blocked for payment only. So I can create a PO, Goods Receipt, Invoice Verification without any warnings or error messages. Isn't there a way to get the system to block these activities as well until the change on the master record has been confirmed?
    On the customer master this feature seems even more useless since 'payment block' makes no sense for a customer. If a sensitive field is changed on a customer, at what point will the system stop the process? I was able to ship and invoice without any messages. Obviously the system is not going to prevent cash application
    Maybe I should post this on the SD thread... anyway, any advise will help.
    Thanks,
    Anisha.

    Hi Anisha ,
    As far as i understood u don't want to carryout any procurement activities for a particular Vendor.
    In that case u can use Trs :XK05 and block for company code / Pur.Org.
    If you want to block vendor for a specific material then u can go for source list ( Trs :ME01)
    Incase of customer using Trs: XD05 u can carryout the required activities.
    Regards
    Ramesh Ch

  • Different Exchange Rate Type for Vendors and Customers Invoices

    Dear Friends,
    We have configured different exchange rate types for Accounts Payable and Accounts Receivable thru T Code OB07. What are the additional Config steps required to ensure that the respective buying and selling rates will apply to Accounts Payables and Receivables. We do not want to stipulate the exchange rate types in Document Types as this special exchange rates are applicable only for one of the Company Codes.
    Would appreciate your help in this regard.
    Regards,

    Hi,
    Then you can use a different document type for those company codes and can default the exchange rate type there.
    OR,
    The alternative wya is to use the substitution in OBBH/ GGB1 for those company codes with exit programming.
    Regards,
    SDNer

  • LSMW upload for Vendor and Customer Open items

    Hi Experts,
    1. I wanted to use to use LSMW to upload through FB60 for Vendor Invoices through recording, but the problem is Amount in Document Currency is 'USD' and Amount in Local Currency is 'INR'. While recording it is not allowing to input values in Amount in Local Currency while my upload file has values in both Amount in document currency as well as Amount in Local currency. Any help with this regards?
    2. Do i need to open the all fiscal years which are there in upload file?
    3. Any better option to upload the Balances with LSMW?
    Any useful information will be Highly appreciated.
    Thanks in Advance

    Hi Rajkumar,
    To upload Open items of Vendor and Customers, in LSMW, you will have two files header and line items with  a link linking both the files.
    Now, Suppose if you have to enter an amount in USD, then in the header file, enter USD in the currency field and give Exchange rate also in the header file and give the exact exchange rate which should be the value of your Amount in Local Currency INR.
    In such cases, you do not enter directly the amount in local currency field.. It is a calculated figure..
    Yes, depending on the posting date, all those fiscal years need to e open for which you are posting the data.
    LSMW is a tried and tested method for uploading open items.. Simple Go Ahead...
    Regards,
    SAPFICO

  • Open item of vendor and customer balances entries

    Hi,
    i want yo upload all the open items of the vendors and customers what will be the accounting entries generated while uploading the balances of the open items?
    regards,
    ranjeet.
    Moderator: Please, note that on new violation of the rules of this forum, your user will be banned

    hi ranjeet,
    first of all use t code fb60 and fb70 for vendor and customers respectively, if you are using the tool LSMW, then
    in case of vendor open invoices
    Vendor offsetting account Dr. .......
                 vendor accountn cr.
    for down payments
    vendor account Dr..
             Vendor offsetting account Cr
    In case of customers open invoices
    customer offsetting account Cr...
               Customer Account       Dr.
    for customer downpayment
        Customer account Cr.
                 customer offsetting account Dr.

  • ITEM INTEREST CALCULATION ON VENDOR AND CUSTOMER

    Dear all,
    how to calculate Item interest calculation on Vendors and customers
    what is the configuration need? please let me know it is very needful for me
    Thanks in advance.
    Regards,
      Ram.

    in ob46 we maintain int calculation types under that u can maitain int indicatro name int calculation type(P)and save
    after that u can prepare itme balance interest calculation(path spro/f/a/ap&ar/business transactions/int calculation/int calculation global settings/prepare item int calculation) here
    u can enter int indicator select open itmes check box enter calander type etc.
    define referance itn rates obac here u can enter ref int rate long text short text date from currency and save
    define time dependent terms ob81 here u can enter int indicator currency effective from sequential number term(u can select item int calculation) ref address rate etc.
    enter int values ob83 here u can enter reference int indicator from date and percentage save.
    if u have any doubt let me know.

Maybe you are looking for