Cost dimension fields invalid

Hi gurus,
i have 2 problems which is listed below
1)When user use the Shop one screen to create the shopping cart the default value for business org is not getting defaulted for that user.
2)Under cost assignment section, when users try to select the dimensions by clicking the binocular the company code field in search criteria is not populated by default
Please help me on this...
Points will be awarded ......
thanks in advance,
SNMkumar

hi muthu,
Yes te user getting the correct BUK- IN ppoma_bbp also the attribute Business org is defaulted and its mark on the check box.
For BUK company code all the users are not marked with default check box - settings are all same for the rest of the users - but only one user alone not getting the company code and business org get displayed in search criteria.
Is there any specific roles to be assigned with respect to the users and to the company code ?
Please advice me ....
Thanks and your answers are highly appreciated.
thanks,
SNMkumar

Similar Messages

  • Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

    Hi All,
    Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
    I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
    IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
    Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either  "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
    Please advise or help me .
    Thanks in advance!
    Regards,
    Praveen

    Hi
    The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
    Anyway, you first need to make the field as optional for example, before you move.
    One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
    regards
    Sidi

  • How to assign search help for custom cost centre field in SRM 7.0

    Hi Experts!!
    We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
    cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
    Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
    Thanks in advance.
    Regards,
    Kalyani

    kalyani,
    i can see your requirement in below way..
    as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
    so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH                        
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH     INTERFACECONTROLLER
    so you can replicate the same functionality for your z field.
    but can you clarify one thing.. why are you going for this z field in place of standard field ?

  • Cost Center Field on Billable Sales Orders

    On the Sales Header>Account Assignment tab of a sales order the Cost Center field allow entries.  We use this for free order, but do not want it used for billable, and we have trouble from time to time with users entering in a Cost Center, thinking they used the right free order type.  The problem is we are not aware there is a problem until Goods Issue time (and alot of the time the shipment has already left the building).  They get a message like, Account Determination for entry COAS GBB EQPT VAY 7920 not possible.  What we would like to know is can there be a warning on a billable order at entry time so they can remove, or is it possible to make the field not editable?

    May be you can have a different order type for billable and control the Order Reason field as non-editable via sale order user exit.
    Perhaps, you can try with sale order User exits in the program MV45AFZZ - USEREXIT_FIELD_MODIFICATION
    thanks
    G. Lakshmipathi

  • Cost centre field in sales order account assignment screen

    Hello all,
    I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
    Thanks in advance
    Raju

    The Cost Center Determination settings is in OVF3 -  but there are some cases where the Cost Center must be exceptionally changed. 
    If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01. 
    Alternatively, you can specify an order reason and assign a cost center to an order reason. 
    However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item. 
    The cost center are assign for such business transactions as :
    - Free deliveries
    - Returns
    - Deliveries of advertising materials
    You can also make cost center allocation dependent on the order reason, for example:
    Order reason: Damage in transit
    Order reason: Free sample
    Both the IMG settings are done in transaction OVF3, either with/without the order reason.

  • Append hyphen automatically after the wrapping of text in the dimension field

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    I want to Append hyphen automatically after the wrapping of text in the dimension field.
    e.g the text reads "I want to wrap this text". then if cell width exceeds after "I want to wrap" then it should be displayed like this "I want to wrap-" "this text".
    Thanks in advance,
    Nita

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    Thanks for your input.
    Let me tell you what I have understood. I will create a variable having the formula (which i have earlier written) in universe. Whenever i need to use the formula in infoview, I will call the variable instead. That's fine. But again, I will have the same problem. If I do any change in infoview level, the cell width is bound to change as it is not the free standing cell, its a column among othe one. e.g.
    A  B  C
    1  2  3
    4  5  6
    (you can think B as the column). Any change(addition, deletion of columns) will certainly change the cell width of B. So, again I need to calculate the things, which i dont want.
    Nita_here: I manually calculated that after 12 characters, the cell wraps the text.
    I wonder if there would be a way to do the things dynamically.
    Thanks in advance,
    Nita

  • Purchase Order Field and Cost Center Field Non Editable In F-48

    Hi Friends,
    I have a cretain requirmnet to make the PO and cost centre field non editable.I tried through shd0 bt it says i can only cretae Transcation variats for Dialiog tran.Please help
    Regards,

    Hi,
    You can speak to your functional people. I think through SPRO "Maintain Field Status Variant' under Financial Accounting ->........
    we can control this.

  • PR creation for 'F" in ME51N, ME52n, the cost center field exit getactivate

    Dear Gurus,
    We have a Cost center Field exit activation, meaning when a PR is generated, the system will validate only for his department cost center. Its working fine
    The issue, when we create PR through ME51n or me52n for Acct Assign "F" here we are going to enter only Work order number and GL number, not cost center. Still this field exit has activation,  here the same error message popup, which suppose not to be.
    So in MM configuration,  i have disabled Cost center field  for acct assignment "F".
    Now when i create a PR for F, for single account assignment, the system will alllow, but if i want to distribute the qty to different work order, the system goes for validation for cost center field exit.
    How to resolve for multiple assignment, how to deactivate the Cost center field exit for this case, its woking fine of Single account assignment (after disable the cost center field for Account Assignment "F")
    Please help me out or any way to do this?
    Regards
    RS
    Edited by: RS on Sep 14, 2009 7:40 AM

    Hi,
    Cross check you have Cost Center field is Hidden for Account Assignment Category A (Asset) in t.code:OME9. Now change Cost Center field as Display for Account Assignment Category A and save.
    Now create a new PO with Account Assignment Category A and find the difference how Cost Center appearing in your PO in “Account Assignment” TAB.
    Regards,
    Biju K

  • GL account and cost center field appearing for Goods issue movt type 201

    Hi SAP Gurus
    We are trying to post goods issue in ecc6 . The problem is that the GL Account and cost center fields are available fields .The cost center field is logical but why the GL account field is avaiable .
    How we can grey out the same field as it is going to be picked up from the valuation class setting in GBB - VBR ? Any ideas
    Regards
    Hitesh

    Hi Ravi
    You think that its ok we have to input the cost center .
    But if you allow the users to input the GL then you are overriding the whole purpose of defining the valuation class and offsetting entries ? What is your opinion ?When you input the material in the goods issue screen the offsetting entry needs to be picked from the GBB -VBR .Although even if you do not enter the GL the system posts the Godds issue document .But from the control perspective this needs to be suppressed .
    What do you think ?
    I have also posted the same in Logistics forum .
    Once  again many thanks for your help .In case you find some solution this would be of great help
    Regards

  • Add cost centre field in va02

    Dear friends,
    How to add cost centre  fields in transaction va02 on screen? is it possible using user-exit?
    or is there any steps to create user-exit?
    Thanks,
    regards,
    Vishal Bhagwat.

    Hi Vishal,
    Your requirement could be implemented using a user-exit:
    Hope the below  reply helps:
    Transaction Code - VA02 Change Sales Order
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    No of Exits: 15
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Kindly Award Points If You Find The Reply Helpful.
    Cheers,
    Chaitanya.

  • Cost Element Field

    Hello All,
    Would be glad to know the field name of "Cost Element" and from which table i will be able to access it. The tables that my report is using is GLT0, GLPCT, ZCOST, ZGLMAP000.
    The modification that is required is that Account Number (GLT0-RACCT) which is an selection screen parameter has to be replaced with the Cost Element field.
    Thank you,
    - Sravan

    Hello All,
    With help from the SDN, i was able to reference the Cost Elements contained in a Cost Element Group and also to provide a Value help for the Cost Element Group.
    The Following Function modules had been used :
    parameters    : s_ceg1(15) type c.                            
    data:    begin of s_setid occurs 0,
             s_setid LIKE sethier-setid,
             end of s_setid.
    data:    begin of s_setvalues occurs 0.                        
             include structure SETVALUES.                          
    data:    end of s_setvalues.                                   
    1. K_GROUP_SELECT - for the Value help
       under EXPORTING pass the CLASS = '0102' and
                                FIELD_NAME = 'TKB9E-SETNR'.
       under IMPORTING          SET_NAME   = S_CEG1
    2. Then used : G_SET_LIST_SELECT
        under EXPORTING pass the CLIENT    = SY-MANDT                    
                                 SETCLASS  = '0102'                      
                                 SHORTNAME = S_CEG 
        under TABLES : TABLES                                                
               MATCHING_SETS         = S_SETID                    
    3. Then Used : G_SET_TREE_IMPORT
    EXPORTING                                                    
        CLIENT                          = SY-MANDT                 
        LANGU                           = SY-LANGU                 
        SETID                           = S_SETID                  
    TABLES 
        SET_VALUES                      = S_SETVALUES
    Hope this will be helpfull to the other SDN contributors/participants.
    Happy Coding,
    - Sravan

  • Could not changed cost center field in document type RE - FSG

    Dear Experts,
    I would like to change 'cost center field' in act document type RE (invoice receipt) through transaction FB02
    I have changed the field of 'cost center' in field status group in OBC4 and OB41 (posting key 50 and 86)
    The field staus group both in OB41 and OBC4 are already set as 'optional entry' but field of cost center is still could not be changed/edit (grey area).
    Kindly advice
    Thank you.

    Hi Chandra,
    Can you please details the coding part if you can remember ..so that would be helping me lot...Since it's production issue , we have implement immd.
    Regards,
    Lalit
    Edited by: Lalit  Sharma on Dec 24, 2009 6:45 AM
    =======================
    This problem can be closed. I got the note.
    Edited by: Lalit  Sharma on Jan 12, 2010 12:50 AM

  • Dimensions/Fields Displayed on Drill through screen

    Is there a way to display additional dimensions/fields on the drill through screen in which you are not loading into the target system?
    To elaborate, suppose I have an import file which I have the following fields: entity, account, dept, affiliate, and amount. My target system metadata has a house for all of those fields except dept because we do not load dept. So I go ahead and I set up my import format to capture all the fields except dept which I do not pull in because I wont load it. I load my data and now I drill through from my target system (click on $1000) and FDM launches and I click on the initial screen which shows the $1000 and it opens up the two lines that made up the $1000. On that screen however, I will only see the dimensions/fields that I loaded: Entity, Account, Account Description, Amount. I will not see Dept because I did not bring it in as I am not loading it. I know I can include Dept in the Import Format as an Attribute and click on the amount to show attributes but is there a way to have it on the initial screen? In other words, I want to bring in the field however I do not want to load it to the target system so it will display on the drill through screen?
    Deepest apologies if I am doing a poor job articulating the question.

    Hello,
    Unfortunately there is no way to change the design that you see during Drillback.
    The dimensions that are displayed are controlled by the dimensions that are loaded into the target system. Since the target system does not know of these dimensions it is not displayed during drillback.
    Thank you,

  • Cost element (Field name SAKTO)

    Hi all,
    We need to update the existing cost element field with new one in the Master Reciepe,
    Can any one give me all other areas across modules where this field has to be updated.
    Pls be kind to explain in detail.
    Thanks in advance
    Regards,
    KK

    Hi all,
    We need to update the existing cost element field with new one in the Master Reciepe,
    Can any one give me all other areas across modules where this field has to be updated.
    Pls be kind to explain in detail.
    Thanks in advance
    Regards,
    KK

  • To make cost centre field enable in VA01

    Hello All,
              Can any body suggest how to enable cost centre field in VA01 with out entering the value for cost centre. Is there any user exits or badi ?
    Regards
    Srinivas

    USEREXIT_SEND_COBL_HEADER or USEREXIT_SEND_COBL_ITEM in MV45AFZB will change the PBO attributes of the coding block screens in VA01/VA02 but I would check your configuration first.

Maybe you are looking for