COST DISTRIBUTION on OVERTIME

Hi All,
We have a issue in cost distribution on overtime. We use FLSA Overtime calculation in time. The OT is calculated after meeting the thershold and OT payment is paid in PY. Since the time is passing the accumulated numbers as wage type after thershold is met, we are loosing the cost allocation in Payroll.The attendence is entered in CAT2 as 24hrs format. If the employee knows that the OT belongs to different Cost, then the Employee enters the hours based upon the Cost center.
Finally when it comes out -of Time evaluation, everything is lost after thershold is met by FLSA standards.
Query 1. how to capture the Cost distribution for overtime hours in FLSA overtime calculation.
Thanks in Advance
arbindo

Hi Krish...
Very first  thanks for your reply. Answer to your reply is ...there are chances for both.technically speaking multiple cost centers can be there for Overtime worked. since the WS is open sun to sat ,workimg hours are 00 to 24 hours employee can be called by different agenicies/ costcenters to work at any time.
In that case how to capture the CC after thershold.
Regards,
arbindo

Similar Messages

  • Infoset query of vendor payments at the cost distribution level

    We would like an infoset query of vendor payments at the cost distribution level of the document.  The issue seems to be joining vendor to the document cost distribution lines. 
    1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document;  the cost distribution lines are not in the tables. 
    2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures.  Vendor data added with an additional field is too slow to be a primary selection field. 
    3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines. 
    4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful.  Joins are not an option in a logical data base infoset.
    5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIIT & FMIFIHD).  BSIP lacks AB documents (reversals).  FM tables lack general ledger only documents. 
    6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table do not work well.  Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data. 
    It would be ideal to have vendor in BKPF, like FMIFIHD has, but it isn't a field.
    Does anyone know of any other options?  I have seen the helpful thread on How to Read BSEG Efficiently

    Hi,
    This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • Infoset query of vendor payments at the cost distribution level of the document

    We would like an infoset query of vendor payments at the cost distribution level of the document.  The issue seems to be joining vendor to the document cost distribution lines. 
    1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document;  the cost distribution lines are not in the tables. 
    2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures.  Vendor data added with an additional field is too slow to be a primary selection field. 
    3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines. 
    4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful.  Joins are not an option in a logical data base infoset.
    5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIHD & FMIFIIT).  BSIP lacks AB documents (reversals).  FM tables lack general ledger only documents. 
    6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table are not an option.  Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data. 
    Does anyone know of any other options?

    Hi,
    This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • Refresh problem in Shopping Cart and PO in  cost distribution in SRM 7.0

    Hi ,
    As of now we are working in SRM 7.0. Actually when we are changing the account assignment cateogary from WBS  to Asset  then the cost distribution need to be changed from Percentage to quantity and vice-versa. But this is not happening .
    Can somebody hlp on this if you guys came across such issue.
    Regards,
    Kalyani

    Kalyani
    Cost distribution will not change automatically when you change the account assignment category. You will ve to distribute it manually on the same lines as you did for Cost Center earlier
    Regards
    VIrender Singh

  • Error while doing cost distribution

    Hi all:
        while I am trying to do cost distribution , a message comes that
    Cycle DOFF is not valid on 11/01/2008
    Message no. GA509
    Diagnosis
    Cycle DOFF is valid as of the starting date 04/14/2009
    System response
    This cycle cannot be processed.
    Could you please tell me how solve the issue ?
    Thank you very much

    Hi,
    The error is because you have created Cycle DOFF with the starting date 04/14/2009 & you are trying to run the distribution cycle for November 2008.
    For which period do you want to run the cycle?
    1) If it is for April 2009, then enter the correct period & year when executing the cycle.
    2) If it is for November 2008, then you will have to increase the validity of the cycle. I dont think you can change the start date of a cycle. You could however create a new cycle with validity period Nov 2008 to Dec 9999 by copying the cycle DOFF & only changing the start & end date. Then execute this new cycle.
    Regards,
    Sangeeta

  • Cost distribution SRM to R/3  - based on VALUE

    Hi all,
    We are working on SRM 5.0 and R/3 4.7.,ECS
    In shopping cart when the cost dsitirbution is sleected as "VALUE",when the corresponding SRM PO replicates to R/3,the cost distribution always changes to percentage/quantity....Why is that R/3 system recognises the cost distribution only for quantity or percentage???
    Also we are now upgrading iur R/3 system to ECC 6.0.Is the above issue resolved in ECC or still persists in ECC 6.0 too???
    Has anybody encountered the above issue??Please share experiences.

    I am curious as to if you got this resolved. When we upgraded, I was hoping that we would finally get to use distribute by value between SRM and SAP without it converting over to percentages. I have worked with OSS and the discussion forum to come up with a resolution but no luck yet.

  • Cost distribution in Extended classic scenario

    Hi All,
    We are in SRM 4.0 using extended classic scenario.
    When we create a purchase order with cost distribution, it gets copied to backend system. But the partial invoice field in backend PO is always having the value "Distribution in sequence".
    In configuration for account assignment category, it has been defaulted to "Distribute proportionately".
    When we checked with SAP they told that for SRM POs it will always be distribute in sequence. It has to be distributed while posting MIRO. This value is hardcoded in SRM PO transfer program. It is very strange and moreover this is a essential functionality which needs to be in SRM.
    Any one using extended classic scenario, could you please tell me how you are handling multiple account assignments?
    Please help me.
    Thanks,
    Arun

    Friends,
    If you are using cost distributions in extended classic scenario, then could you please check and let me know the value that you are getting in the "Partial Invoice" field in Account assignment tab of backend PO.
    Please help.
    Thanks,
    Arun

  • Travel Cost Distribution

    We are having two company codes here, 1000 and 2000. Employees belong
    to either of them. If an employee belongs to company code 1000, and he
    makes allocation of his cost 100% to a cost centre that belongs to
    company code 2000, we are having no problem in posting of expenses.
    This we are handling by maintaining the cost centre belonging to 2000,
    in the Infotype 17 of that employee.
    However with the same employee belonging to comapny code 1000, if he
    does cost allocation 50% to his master cost centre which belongs to
    company code 1000 and 50% to a cost centre that belongs to company code
    2000, we are facing error in posting.
    Is this possible in Travel Management or it
    is to be handled in FI module manually . If possible in Travel
    Management, please help on achieving this

    Hi Friends and Guru's,
    I have a smilar issue related to travel management assignment of travel cost to different cost centre and different company code more details as below:
    We have two company codes 1000 on one COA1 (Chart of Account) and Controlling area COA1 and another company code is on different COA2(Chart of Account) and Controlling Area COA2 and all employees are created in Company code 1000 and we do not have any employees created in Company Code 2000. Issue is business wants to allocate some travel done on 2000 should go to company code 2000, I have tried to change option in Infotype0017 and tried to play around Infotype 0027 subtype 02 cost distribution option no luck for sucess.
    I would like to know your expert advice that do i need to create all employees in Company code 2000 and do i need to re-config Travel management along with GL mapping to 2000 or any substitute way to resolve this issue.
    Your inputs much appriciated.
    Regards,
    Srini

  • Diff in IT 0027 and IT 1018 ie.. Cost Distribution

    Hello Experts,
    My Earlier thread is not found.... so opening another thread........ ( My Question was about -> What is the diff between IT 1018 and IT 0027? If anyone could explain with an example would be great)....
    Correct me if i am wrong, from the earlier replies i got an impression of..... we use IT 1018 if we want to distribute costs at the level of position or org unit...... and IT 0027 if we want to distribute by employee.....
    I saw for the IT 0027 subtypes like Wage/Salary, Travel Expenses, Planned Cost Distribution, Planned Effort etc.,.
    Can anyone explain me with an example in what scenarios will we be using each of thse subtypes.....
    Also, what would be the functionality if IT 1018 and IT 0027 in case of concurrent employement???
    All inputs are appreciated......
    Thanks,
    Janga K.
    Edited by: Janga k on Mar 15, 2010 8:45 PM

    Hi Arthi,
    Thats was really helpfull....... that explains my question regarding IT 27 and IT 1018....
    I would also like to know....... what would be the functionality of these ITs in case if concurrent employement.......
    Would it be same or it would be different????
    Thanks,
    Janga K.

  • Cost distribution on infotype 15

    We have our cost distribution assigned to our positions; we do not use IT0027.  In some cases, we want certain types of payments to be posted to a specific cost center and fund.  We enter these payments on IT0015.  When I try to use the maintain cost assignment on the infotype, I get the following message:
    "Account assgn Functional Area is active in HR on 09/06/2009 and must therefore contain a value"
    The functional area is also set up on the cost distribution at the position level.  What are we missing that is preventing us from using this functionality on IT0015?
    Thanks in advance for the guidance!!

    Thanks.
    The functional areas are defined using transaction PO13, infotype 1018, field FKBER.
    I removed the cost distribution on the position and left only the account assignment, IT1008, on the position.  I tried entering the cost distribution on IT0015 with and without an IT0027, and I receive the same error message as before.

  • Cost distribution within the group companies

    Hi Experts ,
    Need your thoughts on what would be the best approach for the scenario explained below :
    We have a parent company and three other companies within the group. In total 4 company codes. There are some expenses which are booked under parent company and should be later (at month end ) to be distributed at fixed % to the other 3 companies within the group as during the time of entry it is not feasible to separate the transaction at co code level or is time consuming activity. In what way we can distribute such cost and ensure it reflects in FI reporting  also so that P&L shows correct distributed values. Also there are some assets which are commonly shared by all the assets so the depreciation also needs to be shared with the companies in the group. ECC 6.0 being implemented . I tried using distribution but is not giving desired result.
    Thanks
    Sunil

    Hi Sunil Mane,
    What cost objects distribution between different company codes?
    T-CODE:OKKP  Have you selected cross-company-code cost accounting? I think this is a preconditon of cost distribution  between different company codes.
    BR

  • Multiple Account assignment with cost distribution value error

    Hello Experts,
    We are facing the below issue,
    We are trying to create Limit SC with MAA cost center with cost distribution "By Value". we distribute the total value to 5 cost centers. when we try to order the SC, system is not allowing us to order, we got the error message "Multiple account assignment only with percentage less than 100%".
    Please advise how to resolve this issue.
    Regards,
    Santhosh Kumar.G

    Hi
    Check this OSS notes : 1644804
    Regards
    G.Ganesh Kumar

  • Cost distribution not working for -Ve Transactions

    Hi,
    We are spliting the cost for an misc transaction. The Splitted cost are got cost distributed. But the Reversal expenditure (-ve Transaction) is not get cost distributed.
    The cost distribute flag is enabled for the reversal transaction. but no credit or debit account populated. Please let me know what might be the issue.
    Thanks In advance
    Thanks
    Raj

    Check the cost distribution concurrent request's output. It will tell you the reason. It might be an auto-accounting issue too. Post the error code here.
    Sathish Raju
    www.projectsaccounting.com

  • Hours not populated in the Table C1 (Cost Distribution) in Time Evaluation

    Hi All,
    I am entering Time info along with the Reciever Cost Center, Internal Order and other info in the CATS Time sheet and transferring the saved details to HR Time Mgmt & CO. Later when I run Time Evaluation (PT60 using schema TM00) for the person his Cost Distribution info is getting populated in the Table C1.
    Then when I go to the Time Evaluation Results Table (B2 Cluster) thru transaction PT66 and want to check the details for the employee under C1. I see all the Reciever Cost Center, Internal Order  info. I double click on the TReciver Cost Center to see how many hours getting charged to it, it shows 0.000
    even thogh I had entered 4.00 hours against the Reciever Cost center in CATS.
    Can someone direct me in a step by step way as to how to overcome this anamoly.
    Your suggestions are highly welcome.
    Regards,
    Aslam

    Hi,
    I hope you are using transaction CATA to transfer to HR and Controlling.
    When you transfer entries from CATS to HR to which Infotype the hours get transfered?
    Could you clarify me on this?

  • Disabling the cost distribution button on the Process Purchase Order Screen

    This is probably a simple question, but we have been unable to find the place to disable cost distribution on the SRM Process Purchase Order screen for limit orders ONLY.  Basically, we just want this functionality to not be available to users.  Can anyone direct us to the correct configuration for this?  Or do we need to edit the BADI?
    Thanks  in Advance!

    Hello,
    You can hide this field by creating a screen variant through SHD0 transaction. I have tested here and I
    could hide it (GV_DIST_IND in Program SAPLBBP_PDH_ACC screen 1000).    
    In the screen variant you should mark the output of GV_DIST_IND field.
    However, this option would hide this button for all documents.
    Kind regards,
    Ricardo

Maybe you are looking for