Cost element does not exist in CO

Hi SAP folks,
In new co code we have copied GL codes from co code 1000. Now while changing cost element in KA02 system gives error message like "Cost element does not exist in controlling area". Why this error message is comming, however all cost elements are automate come from co code 1000....right....how to solve this issue...please anyone do help.....
how to copy cost elements to new co code from co code 1000 and How to extend existing cost centers to new code. Ex: co code 1122 has 3 cost centers and we need to extend the same to co code 1123. Controlling area is same for both co codes.
Thanks

Hi Eli,
Really, i appreciated for your help.
But, still my question is not to be answered. I am giving entire picture what i have done earlier.
1. I have copied 2 co codes(CACA & CACB) from 1000 co code
2. I have created new chart of a/c (CACA) and assigned to co codes
3. I have co area as INT and assigned to co codes
4. I have copied gl codes to 2 co codes from 1000
5. I have created 5 cost centers newly in 1 co code area
Here my question is:
- We need to extend same cost centers to another co code
- When i am changing cost element, system gives error like no CE in co area..why? and how to resolve?
Thanks

Similar Messages

Activity Type: cost element does not exist

Dear All,
I am working on ERP configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
Can anybody guide me on how to go further?
regards,
Supriya

Dear
Please revivew the following steps when you are creating a New Acvity type :
OP51 - Check Settings for formulas
OP54 - Check formulas for Costing
Ensure that usage of the parameters are indicated. Some parameters are appropriate for capacity calculation but not for schedule calculation. If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
KLH2 - Maintain hierarchy of Activity type group.
OP19 - Define standard value key
The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing. This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with. Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing. The pre-requisite for using this transaction is that the parameters must have been pre-created.
KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01 - Create Activity Type tied to the primary cost element. (the Cost element field)
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
The operations Start and Finish date will be extended due to the extra time spent on the work center. The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order. The new activity will have a price attached to it and the moving average price will increase.
Regards
JH

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

APP-PAY-06153: System Error : Procedure pay_us_emp_dt_tax_rules.insert_fed_tax_row - ORA-20001: &1 element does not exist or has not linked to pay at step 4

Hi Experts,
I'm finding the below mentioned error while I'm saving assignment with Salary Basis, Location and Payroll.
APP-PAY-06153: System Error : Procedure pay_us_emp_dt_tax_rules.insert_fed_tax_row - ORA-20001: &1 element does not exist or has not linked to pay at step 4.
Please note that I am able to save the record if I do not any one of Salary Basis, Location. Payroll. It is basically happening on creating default tax.
Can anyone pleas let me know if you have facing the above error and resolved?
Guru

Hi Guru,
Did you check -
Error Saving A Salary Basis - pay_us_emp_dt_tax_rules.Insert_fed_tax_row (Doc ID 302878.1)
Cheers,
Vignesh

Hierarchy could not be included; root element does not exist ?

hi,
I try to change hierachie for the released WBS with function CN2W_WBS_HIERARCHI_CHANGE_STRU, but I got an error like : "Hierarchy could not be included; root element does not exist" But this does not happen when we change the WBS hierachie in CJ20N, Could you please help me how to change hierachie for the released WBS using the function ? And Which function I can use ?
Thanks in advance

you are using correct function module. Just check the values in Up and down columns .

XPATH Condition to check if an element does not exists

Hi Experts,
I want to know the XPATH condtion to check if an element does not exist.
I have searched the forum but could not find a relevant discussion.
Please help.
Regards,
Ravi kanth Talagana

Left Operand should be your element on which you need to implement the condition
Middle Operand (Condition column) should be Not Equal
Right Operand should be constant EX
I used this condition in RD to route a file from source to target if some element is not present in the file....not present means not even a blank entry for the element....
Check it and let me know the result.
Regards,
Abhishek.

Menu Element does not exist : not a valid ID (FRM-41067) error

Dear all,
I have removed from a menu an item but whenever i run the form i get the error Menu Element does not exist : not a valid ID (FRM-41067) i have searched for FIND_MENU_ITEM but i can't find the menu item id anywhere
What could be the origin of this error, any tips please?

Hi!
Did you have taken a look to menu startup code property in the mmb?
There is often some code to hide menu items.
Regards

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Cost Center does not exist

Hi,
I have called "BAPI_GOODSMVT_CREATE" to have the goods issue, the posting period of MM and FI are opened but the it returned a message Cost center XXX /1101019 does not exist on DD.MM.YYYY .
Any transaction I need to run for the cost center?

Hi Chung,
Check if that Cost center exists. i think CC is 1101019.
Use txn code ks03 to display the cost center. If its there..then check the validity date for that cost center.
Hope it will give u some idea.
Cheers,
Vikram
Pls reward for helpful replies!!

Error in accounting document for Billing - Costing Key does not exist

Hi,
We had activated COPA for updating Record Type - A (Sale Order) and Record Type - F (Billing Document). Subsequently we have removed all the settings done for Record Type A (Sale Order) including Costing key.
Now after this change we get the error of "Costing Key XXXX does not exist" during generation of accounting document for Billing.
Can any body suggest how to over come this error without creating costing key of Record Type A (Sale Order).
Regards,
Ela.

Hi Ela,
Please use T. code KE4J and remove Costing Key from record type F( Billing) then system wonu2019t look for Costing key during releasing billing document to accounting & use T. code KE40 to correct Costing key settings if required.
Regards,
Shailesh Verma

KP90 error - KI222 - Cost Center does not exist.

Hi gurus,
While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
Please suggest any solutions....
1) Can I change the message class for KI222
2) Can I change the from date of cost center.
Please suggest as this in an High priority!!!!!!!!!!!!!
Regards,
Devang

Hi Devang,
As you can see, cost center was created some days after the date that the error message is showing.
You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
Best Regards,
Vanessa.

Personnel Does not Exists CAT

Hi, I created a Personnel in HR Mini Master. in CAT2 transaction , I can search & result shows new Personnel Created , but as soon as I click edit Time Sheet, It say Personnel does not exist. I tried creating Info 315 in PA30, but it said cost center does not exist in CSKS table, which infact exists. please help. Thanks and regards, Niketan Maral

Adding to It Function Module CATS_GET_BASIC_INFOTYPES is giving error for the personnel number
Thanks and regards

Actual activity price does not exist for cost center / activity type

Hi,
We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
We have used a customized program and have loaded the data from se38.
All this HR data will be saved in CAT2
Later we transfer the time related data into SAP FI/CO using CAT7.
+When tested with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
We have run the price calculation forr the FY 2010.
Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
When uploaded employee time sheets before, all the cost were getting claculated and were entering into the respective cost elements, but now no amounts are being calculated and it is taking Zero.
When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
PLease assit
Regards,
shilpa

Hi
I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
Regards
Ajay M

Type (..) of the context element (..) in view (..) does not exist

Hi all
I have got an question. I have an ABAP webdynpro with a context node which is connected to an ABAP structure.
The context node is mapped to a context node of a view and the fields of the view are mapped to the context node of the view. So the data is send through them. That works fine.
Within this ABAP structure i have added 3 extra new fields. After creating them i activated the structure.
Within the webdynpro i have updated the context mapping between the node and the structure and also between the different mappings between the views and the componentcontroller where this node is used,
Within the context tab of all the views i see all the three new fields.
When i try to map those fields to a field in the screen it cannot be done. i get the following message:
Type (..) of the context element (..) in view (..) does not exist
Anf the new fields are gray.
Does anybody know the solution for this?
kind regards,
Anton Pierhagen

Hi all
Thanks for all of the replies. But unfortunately the right answer wasn't there.
I had tried to map the structure and re-create the node on several levels in my web-dynpro, but there was no change after this changes.
When i created an own dataelement and an own domain in my ABAP structure, it worked.
I could select them in the webdynpro. But why????
i still not get it..
But thanks for the replies!
Kind regards,
Anton Pierhagen

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

Cost element does not exist in CO

Similar Messages

Maybe you are looking for