Cost Estimates - system collects planed price for some raw materials only

Hello
I have a question regarding price determination for raw materials when creating cost estimates. My costing variant uses material future price (Accounting 1 view) in raw materials as a primary source for price collecting of raw materials and I want it to be that way. But the problem is that when creating a cost estimate only some materials are recognized as raw (key symbol) while others are recognized for costing (calculator symbol), although all of them have a future price entered into material master data on the same date. For those that are recognized for costing the system uses the average moving price.
I have tried setting all the data for raw materials the same way, the costing views (do not cost, no qty structure), the accounting views are the same and I still cant find the reason why system uses one type of valuation for some and other for others.
Help?

Please check the Price Strategy sequence in the Valuation variant assinged to the Costing Variant in Tcode OKKN. The first priority in your case must be Moving avg price. So, please change it to the planned price which you want. The system will then consider this planned price for the raw material valuation.
hope this info helps you.
regards,
VS.

Similar Messages

  • Standard cost estimate could not be found for the material

    Dear All,
    We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
    Please give me suggestion.
    Your suggestion should be appreciate.
    Thanks in advance............
    AND
    My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
    please let me know how to do........

    Hai
    Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you  need to make configuration  in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
    Pushkala

  • HT4910 I have an iPhone 3GS, for some strange reasons only 45 contact are getting backed up on icloud instead of all contacts

    I have an iPhone 3GS, for some strange reasons only 45 contact are getting backed up on icloud instead of all the contacts.
    Can you please help

    Welcome to the Apple Community.
    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

  • HT2265 for some reason the only photos that do the random scrolling are events, can I include the albums from iphoto to scroll as well.   the know the albums have synced because i can view them in slideshow

    for some reason the only photos that do the random scrolling are photos in the events section of iphoto. is it possible to include the albums from iphoto to scroll as well.   the know the albums have synced because i can view them in slideshow  pls help

    Welcome to the Apple Community.
    I assume you are referring to the screensaver. You can change the photos used by the screensaver in the screensaver settings. Note if you have a large number of photos in the collection you choose for screensaver, not all of them will be used due to the limited storage available to the Apple TV.

  • Ageing for the raw materials.

    Hi All,
    Based on the movement, raw material needs to be analysed for ageing. Reports need to be generated as 30 days, 60 and 90 days period.
    After the good receipt against the purchase order in the store for the Raw materials, we need to take the report for the materials that be in the inventory without any consumption for 30 , 60 , 90.
    do any std report is there in sap
    Thanks
    VRaj

    The below 2 Tcode will help you
    1.MC50 - Dead Stock
    2.MC46 - Slow-Moving Items
    kindly let know if you need more info

  • In running standard Cost Estimate, System is selecting wrong selection ID

    We have two Process in Production . one we use Process flow(PI), in other we use Production flow(PP).
    Now, while running standard cost estimate for Process industry(PI) as  it uses recipe instead of Routing...But system is searching/selecting for routing than recipe.
    Our issue is that when i run Cost run for Process orders , it should select Recipe not routing. And  when i do cost run for Production order...it should select Routing!!!
    Kindly help...
    Shivraja

    Verify the Routing determination sequence in costing varinat - Quantity Structure determination configuration.
    Change the Priority for the selection of task lists as below
    ID                  SP               Task           Plan Usage        Description  Status             Description of Status.
    01     1     R     1     Production     4     Released (general)
    01     2     R     1     Production     2     Released for order
    01     3     N     1     Production     4     Released (general)
    01     4     N     1     Production     2     Released for order
    01     5     2     1     Production     4     Released (general)
    01     6     2     1     Production     2     Released for order
    This should work as expected.

  • CProject, task based costing, strat. 10, plan price for the role in ctr acc

    Hello all.
    According to the costing logic described in R/3 library the following strategies are available for costs when using task based controlling. 
    Costs for task
    4.      Different costs which you entered for the task
    5.      Costs per activity unit for the task in Customizing
    Costs for roles
    8.      Different costs which you entered for the project role
    9.      Costs per activity unit for the role in Customizing
    10.      Plan price for the role in cost center accounting
    Do anyone have experience with using strategy 10?  If so, please elaborate. 
    Thanks for your help / Anders

    Hi Sejo,
    Thanks for your reply, Standalone cProjects works, but obviuosly it has to be integrated with ECC and configuration related to accounting in ERP has to be done.
    Scenario is that I have created a Project and before transferring it to ECC(creation of internal order) I should be able to calculate the cost from cProjects, as these are just rough cost based on cost/revenue rate.Later when I calculate cost using internal order from ECC it should overwite.
    Additionally as per the link I have already done the required configuration.
    1.     Activate Integration
    2.     Define Object Links for Accounting Integration
            Default entry: 0FIN_INT_SOC_R3
             defined RFC destination . Is webserver to be defined - required ?
    3.     Make General Settings
    4.     Define Cost/Revenue Rates
            Cost revenue rates are defined here.
            I havent maintained Organisation unit as it takes default 'zero'.
    5.     Replicate Cost/Revenue Rates
            To replicate cost revenue rates from Cprojects to ERP.
    6.     Replicate Accounting-Relevant Characteristics
    7.     Make Settings in ERP System
            Make settings in ERP system related to controlling
            Create and Change Controlling Scenario
            Define Controlling Scenario
            Settings for Easy Cost Planning
    Assign Cost Elements and Activity Types > Activity type must be open for period and must have proper cost element. (can be maintained in tcode: KP26).
    Then also for Task based costing is not calculating and for role based it is showing Negative.
    Please guide me where it is going wrong.Is it related to Organisational Mapping?
    Regards,
    Nitin Ghadge

  • Looking for some RAW + JPEG Workflow suggestions

    I'm looking for some suggestions on how best to organize my workflow now that I've started shooting with RAW +JPEG. I previously shot only in RAW, but the time spent in post-production was killing me. I've realized that for 95% of my shots that already have the correct exposure, white balance, etc, a JPEG photo is really all I need and saves me a ton of time. I've become convinced that editing every single photo from a shoot in RAW is overkill. I want to have the RAW versions, however, to rescue that occasional great shot where I unfortunately miffed the settings.
    Through reading other posts here and experimenting, I've found that Aperture basically defulats to showing me only the imported RAW photos and that I need to click "New Version from Master JPEG" to see the JPEG version. This seems counterintuitive to the workflow I'd like to establish though. (i.e. I'm thinking it would be nice to see only the JPEG versions, and then only bring up the RAW version when the photo needs some serious correction).
    I suppose I could highlight the entire batch of imported photos and select "New Version from Master JPEG" and then sort through each RAW/JPEG stack, but I'm still hoping there's a less cumbersome way. Anyone out there have any good workflow suggestions for this issue? I'm curious how other people out there deal with this issue in their workflow.
    Thanks in advance!
    Message was edited by: Nate Cannon

    Try this - I do this as a matter of course:
    -select all of the photos after importing them into a project
    -create a new album from selection/call it JPG
    -with all of the images still selected create new version from master JPEG. all of these should now be the album pick
    -close all stacks, the JPEG will be the one showing up on top for that album.
    RB
    More here: [Aperture RAW+JPG|http://photo.rwboyer.com/2009/01/14/aperture-2-quick-tip-shooting-rawjp g>

  • Data not updating for raw materials only in cube level

    HI all gurus,
    we have flow like ods1->ods2->cube1,cube2 and cube3.
    In ods1 we mapped ZMATERIAL WITH OMATERIAL.
    In ods2 we mapped zmaterial with zmaterial directly.
    In cube we mapped zmaterial with zmaterial only but also we added 0mat_type in update rules of cube. i.e.we mapped in update rules  0mat_type is master data attribute of zmaterial.
    But the problem is ods2 is mapped to cube1,cub2 and cube3 parllelly.
    But the data is not populating to cube2 and cube3 only for rawmaterials i.e 0mat_type is having 15 material types(finished ,semi finishe and rawmaterials) only 4 raw materials are not showing any data for these two cubes but for one cube1 it is showing data for all 15 material types. (including raw materials)
    what could be the problem.
    I checked the Attribute change run.
    I checked the data in masterdata also zmaterial and 0material.(data is available upto date).
    Please help and i will definitely assingn the points.
    It's very urgent becauz total my development work is stopped.
    Thanks & regards,
    Kumar.

    Hi,
    Check the material values in cube2 and cube 3 for records not having 0mat_type and then using that material check the material master data table to confirm whether mat_type is present for those materials or not.
    Also, if you have written any start routine in update rules for cube 2 and 3 then check that too.
    PB

  • One PR for all raw materials

    Hi,
    Is it possible that after MRP run we get only one Purchse requisition for all the raw materials.
    I will try to explain
    Suppose we have a finished product F1 and R1 , R2 and R3 are three raw materials required to produce F1.
    Now in a normal case when we take MRP run for F1 we get three PRs for R1, R2 and R3.
    But is it possible to get only one PR which will contain R1, R2 and R3 as line items (As we have in Purchase Orders) in it.
    Regards
    Abhi

    Abhi,
    At PR level it is not possible, but the workaround is that you can use the automatic PO using PR transaction (ME59N) to consolidate multiple PR into a single PO. There are certain prerequisites to be met for this,
    1. Vendor should be defined for Automatic PO, Materail Master Purchase view Auto PO to be activated.
    2. Inforecord for the material.
    3. Source list with fixed vendor and MRP relevant indicator needs to be maintained.
    with the above set of defination after MRP run Vendor gets assigned automatically to PR and you can use transaction "ME59N" to consolidate multiple PR's to a single PO.
    You can also run program "RM06BB30" to create PO's in background based on the selection critera given in the intial screen....
    I hope this would satisfy your need....Reward your points and close the thread,
    Regards,
    Prasobh

  • Folder created in System form and disabled for some users.

    Hi,
    I have created a folder in Inventory data form and work well for every users who have professional licence with R/W permission for that form. If a user with CRM licence access the Inventory data form, he see my folder disabled.
    If I put these users in R/W, all is OK : everyone can access my folder. But, I won't let it like this... If I won't grant R/W access to everyone and get back to R only, I will loose that property.
    Q: How to make that folder activated for all users what ever the licence he has ?
    Thank you.
    Edited by: Kevin Bedard on Oct 29, 2008 4:37 PM

    HI,
    The crm user has only R rigths in the license. I think the form is only in view mode (check the form mode from debug)
    Even the form is in OK mode, not view mode:
    Try:
    1. get the form_activate event
    2. Enable the folder even it is disabled.
    Regards,
    J.

  • System preferences in iMac for sound output shows only headphones. How do I change this to get sound through computer? Thanks.

    In sound System preferences on iMac  headphones is only option for sound output. How do I change this to get sound output through computer, as in a video etc. Thanks.

    There is a switch in the jack that may be stuck. Try plugging and unplugging a headset plug into the socket a few times.
    You might try dipping the headset plug into some pure alcohol, wiping it nearly dry, and repeating the process to clean/clear the socket.

  • Generating the IDocs for some particular segments only......

    Hi Gurus,
    I have activates the change Pointers for generating the IDocs whenever the master dtaa is changed.
    Is there any technique so that I can recive the IDocs containing only those segment's data which is relevant for me.
    Abhi....

    The question I have asked is not related to Inbound I Docs processing.
    Actually I am sending the IDocs to Non-SAP system whenever any change is made to the master data, using the Change Pointers.
    Now, the situation is that the file that is getting generated contains the data corresponding to many segments. So, is it possible to restrict the segments/fields for which the data is generated.
    Thanks In Advance.......
    Abhi.,,

  • Suddenly my new itouch shows the incorect album artwork for some songs, but only on teh device - the itunes library on ym computer is correct.  I did resync but non change.  any ideas on how to get it to match again?

    Got my new itouch and after some minor issue syncing, i was able to get everything set up.  However I  just noticed that soem of the album artwork is not matched up to the song that is currently playing.  I also sometimes, after syncing, I get a message stating "iTunes unable to load data class information from Sync Services.  Reconnect or try again later."    Any ideas on hwo to get the artwork realigned to the correct songs?

    Try this, it has worked for me.
    1. Make a new, empty iTune library by launching iTunes while holding down the Option key.
    2. Choose create new library; do NOT have iTunes scan for music.
    3. Enable iTunes Match on the empty library.
    4. Find the tracks with the wrong artwork, highlight them, Get Info and paste the correct artwork into the "artwork" field.
    5. When finished update iTunes Match, then re-launch iTunes while holding down the Option key and chose select library to get back to the "master" library.

  • I own an iPod shuffle (4th generation). For some reason, the only music that will sync to my iPod are the songs I purchased off of iTunes. (Most of my music is copied off my CD's)

    My iPod shuffle only syncs music that was purchased from the iTunes store. Most of my music has been copied off of CD's and none of that music will sync to my iPod. Please help!

    Sorry for  the typos, I hope my message still gets across!

Maybe you are looking for