Cost event and Cost change API
Hello,
based on the documentation of RMS 13.2 and tests performed, the cost change information applied throught RMSSUB_XCOSTCHG.CONSUME doesn't create Cost events in RMS, thus, the future cost engine have no invoirmation about the changed cost. Logical, that the ELC is not in concideration too.
I have a question:
Is there a common way (best way, already implemented way) to "push" the cost change API to trigger the Cost events creation or somehow force future cost engine to recalculate the base and related cost infomation?
Suggestions are appreciated.
Best regards,
Eldar.A
Edited by: Eldar.A on 24.07.2012 3:19
Hi,
Please maintain correct Profit center through OKB9.
Or if the profit center is wrongly maintain by user then add the validation with the help of abapor using badi's MB_DOCUMENT_BADI / MB_DOCUMENT_UPDATE
Regards,
Sandesh Sawant
Similar Messages
-
Cost Elements and Cost Centers in a service order
Hello Finance Friends....
I am inquiring about something that has been happening and I can not find the answer as to how. I spoke with the finance consultant and he seems to think it is the valuation class being changed but the valuation class has not been changed at all....so here is my problem as I am at a lost...it is an intermittent problem....
I have a service order for material to be repaired by the customer...lets say coming in for Ansi Calibration with repair.
The technician will issue material to the service order for repair....if the technician does not end up using the material for repair he will reverse the goods issue and then the material goes back to stock...
in my scenerio ....when the material is issued it is under GL account (cost elelment) 5XXXXXXX. When the reversal was done it went to 6XXXXXXXX. So when the DP90 transaction is done (billing request) it gives the error for cost center XXXX cost elelment 6XXXXXXX and can not complete the transaction DP90. The error is the Material combination for DP90....this works in others....these are just one offs that it is happening to and there seems to be no rhyme or reason to why it happens... I have tried reverse the transaction to put the material back to the service order and then manually reverse myself using the original GL account number it was issued on (5XXXXXX)...however when doing the DP90 it still reads the 6XXXXXXX cost element and cost center XXX. Keep in mind that the valuation class or material type has not been changed.
Where is the GL account and Cost center being derived from in the service order? What can I check?
Thanks in advance....Hi,
Check in T030 table for OBYC assignments and TKA3A table for OKB9 settings.
Also check account assignment tab of PO.
Best Regards,
Madhu -
Cost Center and Cost Element Hierarchy and Actual Cost Center
In Bex - Right now I am displaying Cost Center and Cost Element hierarchy with 12 months of data. I want to display the actual Cost center number next to cost element hierarchy - Can I display in Bex?
Tried to with Structure creating formula variable for Cost Center using replacement path - didn't work. Can you please suggest me how i can achieve this?
The format should be
CostCenter H1 CostElement H1 CostCenter Jan Feb ...
Thanks in advance and appreciate for any help...Let me explain it clearly and hope it is clear now...
Designed the report as like this - Cost Center Hierarchy by Cost Element Hierarchy for 12 months of data. But Business agian search in R/3 for actual cost center numbers based on above two hierarchy nodes.
I am trying to achieve this Bex instead of going back to R/3 - so that they can understand how the dollar amount is summed up on which major cost centers.
If I remove the hierarchy on Cost Center - it will display all the cost centers. They want to see the Cost center numbers based on CC and CE hierarchy node so that you are displaying only those cost centers. That's the reason I am trying to design the report with CC Hier, CE hier, Cost Center number and 12 months of data.
In my data model - have only one Cost Center, if i can create another ZCOSTCENTER same as 0COSTCENTER - May be I can achieve this. still looking for options with out changing the design. -
COPA derivation for thecombination of Cost center and Cost element/GL accou
Hi Gurus,
In COPA derivation using KEDR i am trying to make a derivation for the
combination of Cost center and Cost element. Here i got following problems
While posting FI document using t.code FB50 system not automatically
updating the fields Cost center and cost element in Profitability
segment. Hence system not posting COPA document. How can i make this
derivation? Is there any note should i apply regarding these.
How can i create cost element as characteristic.
If i configure derivation for the combination of Cost center and cost
element will it be posted with copa document for postings or automatic
postings from MM,HR and FI
Pls provide me solution at the earliest.
Thanks and Best regards,
Dhanumjaya.Ranga
Mobile: - 919940093579
Mail : [email protected]Hi Murali
Thanks for update
I explain my req clearly
For me segment is Distribution channel field (EXPORT and DOMESTIC)
If GL account is 1000-2000 always Export
If GL account is 2001-3000 and Cost center is X then Export.
If GL account is 2001-3000 and Cost center is Y then Domestic.
Based on above REQ i am making derivation using KEDR T.code.
These postings should work for all modules postings such as MM, HR also.
Actually this should work automatically and after saving the transaction we should have copa document also.
But problem is in source fields of derivation we have GL account (HKONT) and Cost element (KSTAR). I am making derivation using either of these.
But after posting document system not giving COPA document.
I found the reason is at GL postings we are giving input to GL account (HKONT) but we took in KEDR source field as GL account (SAKNR). GL account (HKONT) is not updating GL account (SAKNR) field in PSEG screen in Fb50. Even i try with cost element (KSTAR), GL account (HKONT) is not updating this in PSEG screen in fb50.
If GL account (HKONT) updates either GL account (SAKNR) or cost element (KSTAR) at the time of posting FB50
Or
If we have the field GL account (HKONT) as source field in KEDR i hope my problem
Get solved.
If you want further info pls give me your mobile number then i ll call you -
Cost centre and cost element related tables
Hi,
Could any help me in knowing whre the cost centre goup and cost element groups are maintained.
Could you help in proving the link tables between Cost centre, Cost centre Group, Cost element and Cost element group.
Regards,
KrishnaHi,
Please refer to Table SETLEAF for cost element group and cost center group. This table is based on set class and 0101 is for Cost Center Group and 0102 is for Cost Element Group.
Cost Center Master data table is CSKS and Cost element Master data table is CSKB. To the bse of my knowledge you cannot directly join these two tables with SETLEAF table as key figure fields are not common. In case you are getting any ABAP report developed, you can ask the developer to write a code saying Controlling Area is equal to Organizational Unit as Set Subclass.
Hope this helps.
Regards,
Harish -
Cost center and cost center group
hi,
how can i create cost center and cost center group?hi,
after u enter in to sap easy access
goto Extras menu-settings->select display technical names
you can see the T.codes for each transaction
for example:create cost center
accounting>controling->cost center>master data>cost center>individual processing-->KS01-create -
How do i fetch workcenter ,cost center and cost elem using plant ,material
Hi.
i have plant and material in my sleection screen..
how do i get corresponding workcenter,cost center and coste elements..
i need to find total quanity(total hours per cost center) in terms of huors corresponding to each costcenterStart with VAPMA and then go to VBAP. You can use the information here to go to BSEG if necessary.
Rob -
Combination of cost elements and cost centers
Hi guys,
what if I mentioned only cost centers as sender values in a segement of assessment cycle? do you think that is must to have cost element and cost center combination in sender values? how it will be differnt I dont mention any cost elements along with cost center in segements as sendors? please clarify me with the example.Hi
Cost Centers are the cost collectors and cost elements are the cost carriers.
When you add cost elements and cost centers as senders you define that the cost that are available in the cost centers are carried to other cost objects via the cost elements.
Hope it helps
Good Luck
Hari -
Cost center and Cost element.
Hi all,
I am in an urgent need to understand the relation between cost center and cost element. Please provide me with their individual information as well as the link they share. An existing relationship table between the two, if any, ...then plz mention.
Thanks & Regards,
NareshCost Element: cost element is an individual which carry cost like salaries, wages, power expenses, etc.. These Cost Elements are Two types
1. Primary Cost Element
2. Secondary Cost Elements
Primary Cost Element will carry cost form FI to CO (Cost Centers, Internal Orders, Cost Objects, etc )
Seconday Cost Elements carry cost with in CO to different Cost Centers, Internal Orders, Cost Objects, etc
Cost Center: Cost Center is an individual which contain collection of costs. For example Admin is a cost center, it contain costs like Salaries, Power, Rent, Stationary etc,
With this following report you can retrieve cost elements given a cost center controlling cost center accounting information systems reports for cost center accounting plan/actual comparisons
Thank you -
Cost center and cost element in different collumns
Dear all,
I developed a report painter where the lead collumn has cost element and cost center. When I run the report it shows at the same collumn the cost centers and in a different line the cost element totalizing the amount of each cost center. So the report shows for each cost element the cost centers posted with this cost element. The report show like below:
|-------
Cost center A | 100
Coste center B | 200
|-------
Cost element xxx - 300
The problem is: How can I make the Cost element in a separate column ? Ex:
Cost element xxx | Cost center A | 100
Cost element xxx | Cost center B | 200
Cost element xxx - 300 (In fact I don''t need the total)
I need cost element and cost centers in different collumns to allow export it for other application..
RegardsHi
In report painter report we have only one lead column so we cannot have cost centers and cost elements in two different columns.Instead we can use the functionality of variation.Give the cost center in general data selection screen and select the variation functionality.So that cost centers are displayed on the left side of the report as hirearchy and only cost elements are only displayed in lead column.
Thanks
Sandesh -
Cost center and cost element display through report painter/writer
Hi
Can any one suggest me how to display both cost center and cost element in the output of a report painter.
Presently --- I am able to display cost center and its cost elements in the same leading coloumn and its periodical values for 16 consecutive col.s.
Help Needed --- Suggest how to display cost center and cost element in the output of the report along the periodic values.
Thanks
TanguduCan any one share some advice on this above query.
Thanks
Tangudu -
CO, which table decribes "cost center" and "cost center group"?
Hello experts,
now I have the transaction KP06. Maybe through customizing the user has built a "cost center group" for some "cost center".
In which table can I find out the relationship between the "cost center" and "cost center group" ?
Thanks.
RD
Edited by: Marching Dai on Jun 16, 2008 2:05 PMHi Arun,
Please check this link
http://www.erpgenie.com/abap/tables_fi.htm
Please check CKPE --->CO-PC Cost Object Hierarchy: Individual Objects
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB Cost Elements (Data Dependent on Controlling Area)
CSKR Resource master record
CSKS Cost Center Master Data
Best regards, -
Difference between Cost Centre and Cost Element.
Hi Guru's,
what is the difference between Cost Centre and Cost Element.
regards
JKHi,
Cost elements:
A cost element classifies the organization's valuated consumption of production factors within a controlling area
Primary Element - costs that originate outside the company; relate directly to the income statement in FI and must be included in the FI Chart of Accounts
Secondary Element - costs that result from internal allocation activities; NO relation to G/L accounts in FI. These accounts are exclusively for cost accounting and are only maintained in CO
Cost centre :
Organizational unit within a controlling area that represents a defined location of cost incurrence. The definition can be based on:
Functional requirements
Allocation criteria
Physical location
Responsibility for costs
Defines the smallest area of responsibility within the company that causes and influences costs; the lowest level to which you can meaningfully assign direct and indirect costs
If this meets your requirement, you may like to close the posting.
Muraleedharan.R -
Cost Element and Cost element group
Could You tell me how to chech which Cost Element Group given Cost Element belongs to? Greetings. P.
Hello
With Transaction code KAH3 you can able to view the cost element group.
give your controlling area and cost element group you can easily able to find out the cost element included in concern group.
If the above answer resove your query kindly provide the marks
thanks and regards
Mahesh -
Mass Extension of cost center and cost element validity dates
Hi SAP Gurus,
We have around 5000 cost centers and 6000 cost elements for which "Valid to" date is 09/27/2008. We need to extend this date for another 5 years.
Can you please suggest any pointers as how we can do the mass update.
We have already tried KS12 which is not of any help.
Thanks,
Sreeni.
1-408-307-7965
CA, USA.Hi,
Run the LSMW.
Or Use the fuction automatic creation of Primary/Secondary cost elements in the SPRO.
Or You can write a program which replaces the valid to date directly in the database table.
For this you require ABAPER help.
Regards,
Edited by: Jagadeesh Sornapudi on Sep 13, 2008 8:25 AM
Maybe you are looking for
-
i Tunes will not let me play purchased songs from a computer that is broken, and which has a previous e-mail address. I am at my wits end, as whenever I try to play the songs I receive a message to authorise the computer I am using with my dead e-mai
-
Adobe bridge won't start anymore. Icon is hopping and then it shuts down..
Could someone help me with this. After trying to install output module in bridge cc, bridge won't start anymore. The icon is hopping for a few seconds and then the appllication is shut down.
-
Problem with Excel button in ALV Grid...URGENT
Hi All, I have developed a report in ALV Grid. As we all know that by default we get few buttons in ALV Grid, like summation, sorting download, etc.. In that we have one excel button. When i click that excel button the output of the report should giv
-
Business Partner Name missing from ACH Payment File
We are trying to send a payment on a loan to a business partner via an ACH file. When the file is created, the payee name is missing from the ACH File. It runs perfectly in our developement client, but not in production. I can not seem to find any
-
Complex JDOQL expression does not work. Or maybe I'm doing something stupid?
Hi! I have several related objects: Customer, Contract and AccessKey. Each Customer has 1-to-many relationship with Contracts (so it can have several contracts) and each Contract has 1-to-many relationship with AccessKeys (so that contract can have s