Cost grouping exit (PBEN0004) is not outputting the cost values

Hi,
Client requirement is adding a custom field for vesting in 171 infotype, based on this status we have to make the correct cost grouping in the user exit.
I have incorporated the logic in the user exit. When I execute PA30 transaction for infotype 167, it is triggering and giving the right cost group. But after successful execution it is not showing the cost values(giving initials).
My self and functional guys checked the config steps and placed perfectly, technically nothing wrong in the user exit. So i am in big confusion. Please share your experience in this regard if you come across before and suggest if you have best solution.
Thank you.
Ravi.

Dear Ajay,
I have already included the same cost center in splitting structure.
I have solved the problem but some doubt in my mind.
1) I have maintained 11 equivalence no. instead of 1. problem is resolved.
but my question are
a) I dont want equivalence no. in kp26. Is it require for revaluation of activity type?
b) when i changed equivalence no. from 1 to 11.Problem is resolved.What is the logic behind it.
regards
RR

Similar Messages

Control not outputting the correct value

Hello,
I have a producer consumer architecture with a queue to pass values. I want to push a new value onto the array using "Insert into Array" when a button is pressed, but when I do the previous value is being read the first time and the correct value on the second press.
I'm self taught and it's my first time using the queue so maybe something I'm not seeing/thinking about there?
Version 8 VI Attached.
Do this to see the problem:
1. Run
2. Click "Master Read"
3. Change "Value"
4. Click "Master Read"
5. Click "Master Read"
Any help is appreciated including block diagram critique.
Thanks!
Solved!
Go to Solution.
Attachments:
Untitled 1.vi ‏16 KB

It all depends on how you change the value of "Value". If you use the increment and decrement buttons it works as you expected.
If however, you type in a new value and click the button without clicking somewhere else first, it doesn't work - and here's why:
When you type in a value that modified value doesn't show up in the code untill the control loses "key focus". The problem is that clicking the button does cause the numeric input to lose key focus but only after the code has responded to the mouse up event.
To fix the problem put a property node in the mouse down event to set the numeric's KeyFocus property to false before the value is enqueued.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement.

COPA Derivation Rules are not assigning the correct values

COPA Derivation Rules are not assigning the correct values when we process billing documents in batch. We currently have derivation rules defined to take the ship to country and refer to custom tables were we identify custom geographic groups (INT/DOM and EAM, AP, etc.). The derivation rules work accurately when the billing documents are created individually, and more than 75% of them are accurate when generated in batch, but in some circumstances, it populates the derived values with the wrong field and we can not identify where or why that's happening. It looks like it may have something to do when the ship to customer number account group is different, but that's not consistent.. Does anyone know how or where these values get populated, or have any ideas why incorrect values are appearing sporadically throughout the billing run? Thanks!!!

Leigh,
Apparently the function module is changing the values for some billing docs. Check one of the following user exits, if it gets triggered and the values are changed:
COPA0001 Enhancement for derivation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEDRCOPA_001
COPA0002 Enhancement for valuation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEAB_001
COPA0003 Enhancement for assignment to profitability segment (CO-PA)
Function Module: EXIT_SAPLKEAK_001
COPA0005 Enhancement for actual data update (CO-PA)
Function Module: EXIT_SAPLKEII_001
Function Module: EXIT_SAPLKEII_002
Award suitable points if the above helps. You can also reach me at [email protected]
Thanks
Ajay

How to not repeat the column values if repeated on next line and so on..?

Hi all,
The XmlP template that is designed gives me the output as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 695.00 cad
abc 2 1000.00 100.00 95.00 695.00 cad
abc 3 1000.00 100.00 95.00 695.00 cad
But my requirement is as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 795.00 cad
- 2 - 100.00 - - -
- 3 - 100.00 - - -
Note : "-" indicates blank column values (gaps are being filled)
How do I not repeat the column values if repeated?
Please let me know if you have answer for it?
Thanks in Advance
Munna

Iam trying to design the xml publisher template using xmlp template builder.
My requirement is :
For a receipt number, I have receipt amount, applied amount, unapplied amount and on account amount. And for each receipt, there can be multiple applied amount ( as the receipt can be applied multiple times), but the unapplied amount, on account amount and receipt amount is single.
By using the logic as said above from http://blogs.oracle.com/xmlpublisher/2007/04/13
Iam getting the output something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|-|-|
1112|-|228.98|-|-|
My requirement is to go get something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|0.00|0.00| ---> here lies the difference
1112|-|228.98|-|-|
How do i check the duplicate of the column values only for a receipt number??
Because as for receipt no. 111-b the unapplied amount and on account amount is 0.00, the the unapplied amount and on account amount for receipt number 1112 is getting hided( because its a duplicate) . In reality, it should be 0.00 and any other line for that receipt number (1112) should be hided. except for the applied amount.
Note We can see that last 2 columns in the last record( for receipt number 1112) is getting hided that is as expected but for 4th record the unapplied amount and on account amount should be 0.00 respecively.
'-' indicates hided value
Please help.
Thanks in Advance

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

How can I validate a dropdown box to NOT accept the default value?

I have a fillable form where I need the user to select their "Number of Employees". I have added several ranges as their options in a dropdown box (1-10, 11-25, 26-50, 50+). My issue is the "defult value" is set to "1-10" and people submit it without changing it to the correct value.
I have changed the default value to "--Select One--", but it still lets them submit the form with that value entered.
I am assuming I need some sort of validation script that will basically say - "If the value in this field is --Select One-- do not submit the form, but give an error that says 'please select your number of employees" or something along those lines.
Basically I just want them to pick something as opposed to just submiting it with the default value.
I have looked all over and am not very good with JS.

You can not have the default value set to a real possible value. You need a value that should be selected.
Then for your submit script you need to test all of your required fields to make sure they are not at the default value.
You make a variable that assumes all the required fields are completed and then check each field and if any one still has the default value you set your variable to "false" and then when you have checked all the fields you test your variable's value and only if it is true to you submit the form.
var bSumbit = ture; // logical variable for submission test
// test drop down # of employess
this.getField("Number of Employees".).required = false; // clear required property
if(this.getField("Number of Employees".).value == "--Select One--") {
bSubmit = false;
this.getField("Number of Employees".).required = true; // set required property
if(bSubmit) {
// your submit acation;
} else {
app.alert("Not all required fields properly completed", 0, 1);

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

The parameter 'host_name_full' of ICM not showing the right value

Hi ,
The parameter 'host_name_full' is not showing the correct value.
It is still showing the value as fully qualified domain name, where as we have reverted the setting some time back .
can anyone let me knwo from where does it pick up the value from .
and how can i Edit the value to show the correct value
Thanks
Nikhil

Hi Nikhil,
Check this 2 links will be useful to u r query...
http://help.sap.com/saphelp_nw04/helpdata/en/e7/7af83b0255a206e10000000a11402f/content.htm
http://www.basisconsultant.com/modules.php?name=Content&pa=showpage&pid=12
Regards,
Sridhar

Error :Value of restricted LOV parameter not among the selectable values

Hi,
I am designing a report which has two layouts. I have a parameter :P_Reason_code which is applicable to only one layout.
There is a repeating frame in my first layout which should display only if :P_Reason_code value is 'Y'.
I have wriiten a format trigger for this repeating frame saying the repating frame should return true if :P_Reason_code value= 'Y'.
else, it should return false meaning it shouldnt display.
:P_Reason_code is an optional parameter when i run it at the oracle apps front end.
The problem that i am facing is that when i run the report for the second layout by not providing value for the parameter :P_Reason_code
, it errors out saying "REP-0788: Warning: The value of restricted LOV parameter P_REASON_CODE is not among the selectable values.'
I tried creating another user parameter P_REASON_CODE1 and putting a trigger in the After parameter form trigger saying
if P_REASON_CODE is null then
P_REASON_CODE1 :='Y';
P_REASON_CODE := P_REASON_CODE1;
ELSE
P_REASON_CODE1 := P_REASON_CODE;
P_REASON_CODE := P_REASON_CODE;
END IF;
But still it doesnt seem to work.
What could be the issue?
Can anyone help?

try setting the default-value for the parameter to Y (or whatever value is in the LoV defined for the parameter).
Is there a parameterform used for the report. If not remove the LoV from the parameter.

Rounding Off is not rounding the net value in Debit/Credit Memo

Dear Experts,
Please guide me in the below mentioned situation:
I have used "Rounding Off" i.e. DIFF condition type in the pricing procedure and it is giving the desired result. But when I am creating Credit/Debit Memo, the Rounding Off is taking that value which it has taken to round the total value in creating billing document. As a result in many cases, while creating Credit/Debit Memo the Rounding Off is not rounding the net value of the document.
Please guide me how to solve this problem.
With regards,
Jhelum Roy.

Thank you sir for this information. this is really helpful.
Further
My requirement is to capture this rounding value also and show it in the print and carry to GL account. So that client can generate a report on this extra revenue by rounding values.
I ahve only condition type in my rpicing procedure as per my requirement. details maintained are below
condition typr: ZPPC
Mandatory: X
print : X
requirement : 2(Item with pricing)
cal type: 17 (Rounding as perT001R)
Acc Key: ERL
in the table T001R table the calue maintained for Co.Code is+currency is 5(so that system is alsays round up 5)
tha t means if the value is 26.03 then it will become 26.05. This is working fine. but how to capture this 0.02 seperatly and carry to gl accouns
Thanks you in advance
Kiran Musuku

Could not convert the data value due to reasons other than sign mismatch or overflow. ADSI Provider

I'm trying to run the following query against Active Directory using the ADSI Provider using SSMS 2012 SP1:
SELECT
TOP901
*FROMOpenQuery
ADSI
'SELECT description
FROM ''LDAP://OU=MMICorporate,DC=mmis,DC=mi,DC=com''
WHERE objectClass = ''User''
and objectcategory = ''Person''
and ''userAccountControl:1.2.840.113556.1.4.803:''<>2
)AStblADSI
Msg 7346, Level 16, State 2, Line 2
Cannot get the data of the row from the OLE DB provider "ADsDSOObject" for linked server "ADSI". Could not convert the data value due to reasons other than sign mismatch or overflow.
I only have this issue querying the Description Field.
I also found a hotfix KB: 887474 for this but it is for Windows 2003. SQL Server OS I have is Server 2008 R2. Is there a fix for 2008 R2?
Thanks

Thanks for the quick response.
I checked out the link and I can only convert to Ul8 and when I try I get the same error:
SELECT
TOP901
*FROMOpenQuery
ADSI
'SELECT name, convert(UI8, description)
FROM ''LDAP://OU=MMICorporate,DC=mmis,DC=mi,DC=com''
WHERE objectClass = ''User''
and objectcategory = ''Person''
and ''userAccountControl:1.2.840.113556.1.4.803:''<>2
)AStblADSI
Am I missing something?
Thanks

Not getting the return value of a program though it has no errors

public static String giroReturnFileDate(String strType)throws IOException{
          try{
               SimpleDateFormat getFormatDate = new SimpleDateFormat("yyMM");
               Date date = new Date();
               String str = getFormatDate.format(date);
               System.out.println("Current Date is : "+ str);
               System.out.println("Fetching the Giro file now");
               if(strType.equalsIgnoreCase("WPD") || strType.equalsIgnoreCase("ISTD")) {
               FileReader inputFileReader = new FileReader("giro2itcs_"+strType+".txt");
               ArrayList list = new ArrayList();
               ArrayList list1 = new ArrayList();
               System.out.println("Reading the file");
               BufferedReader inputStream = new BufferedReader(inputFileReader);
               String inLine = null;
               String str1 = null;
               while((inLine = inputStream.readLine()) != null && inLine.length() < 2)
                    list.add(inLine);
               System.out.println("Control Record for giro2itcs_"+strType+"is:"+ inLine);
               inputFileReader.close();
               inputStream.close();
               for (int i=0; i<inLine.length(); i++ )
                    str1 = inLine.substring(19,23);
               System.out.println("date of the transaction is:"+str1);
               if (str .equals(str1)){
                    System.out.println("giro2itcs_"+strType+".txt file is created today");
                    return "true";
               else{
                    System.out.println("giro2itcs_"+strType+".txt file is not created today");
                    return "false";
               }// end of if
               return "test";
          }// end of try
          catch(Exception e) {
          System.out.println("The Exception is ::::::::::::::"+e);
return "one";
}//end of giroReturnFileDate(...) method
}//end of of the class
main method is seperate. this program compiles fine but am not getting the return value for this. none of the return values. plzzz help me.

can you send me the code complete one ...
i will debug and solve the problem
[email protected]
By publishing your email address you are likely to get loads of spam.

Not reflecting the new value of the AWvariable

I am working with Jdeveloper and BI beans
we are using Java Analytical workspace API for connecting and saving the user input as a Analytical workspace Variable
by using fallowing code
awConn.executeCommand("awvariable=value");
here the problem is i can not made this assignment perminent in Analytical Workspace
i.e after execution of the program i checked with AnallyticalworkSpace manager's worksheet it not reflecting the new value of the AWvariable. It is showing only old value.
how can i do that assignment it from java api .
any one can help me

That other post looks different, though - the OP is now manipulating the model.The OPs statement of the problem was:
Adding new data to the exitsting model causes the JList to display blank when I refresh the screen.
The suggestion in the other posting was to change the model not the array and the tutorial has a working example of this.
The OPs question was:
When my action performed creates a new instance of the model everything works fine but is this how it should work?
The answer to this is no, you don't need to change the model, just update the model.
So if the OP read the other posting and read the tutorial they should have an answer to their problem.
As you suggested there is no need to create a custom model. The example in the tutorial uses the default list model, if the OP read the tutorial they would know that.

Sales order should not copy the net value from contract

Hi,
When we are creating the sales order,Where we can maintain that sales order should not copy the net value from contract.
Regards
Prabudh

Hi,
When I am creating the sales order with reference to contract,it's copying the net value and quantity from the contract.
But I want that sales order should not copy the net value and quantity from the contract and user can take new required quantity at the time creating the sales order.
Regards
Prabudh

Cost grouping exit (PBEN0004) is not outputting the cost values

Similar Messages

Maybe you are looking for