Cost not update

Dear All,
I carried out the Code CK24 for updating the cost.
System has given the information message: 1 material ,cost estimates were updated successfully.
But MM02 no cost is updated.
Please guide me to overcome this issue.
Thanks in advance.
Vijay Mankar

Dear Mr.Pradeep,
I carried out the suggested step for the same.
But again the system gave message 0 material,0 cost updeted.
In CK11N error message like material T_234
1000 CK 694 No structure could be determined for internal activity SETUP (S1000) 2,
I clicked the error it gives
Check the master data for activity type SETUP of cost center S1000. It is possible that no activity price calculation has been carried out for the cost center.
Please do the needful
Rgds,
Vijay Mankar

Similar Messages

GR Cost not updating as Target Cost for process orders

Dear SAPians,
We are facing an issue in Target Vs Actual cost reporting for process orders. We are creating a process order after cost estimate of that material and doing the confirmations for activity cost. After that, GR has been done for the finished goods of that process order. That GR entry is updating the Actuals values but not updating the Target cost. When I am checking the standard report KKBC_ORD, I am getting the following figures.
Cost Elemnt Text     |     Target Cost     |     Actual Cost     |     Target Vs Act
Inventory Chnge FG     |     0     |     1,472,205.60-     |     1,472,205.60-
Packing Matrl Cons.     |     1,148,142.37     |     1,252,752.68     |     104,610.31
Raw Material Cons.     |     60,463.91     |     50,688.29     |     224.38
Semi-Fin Matrl Cns.     |     181,934.68     |     367,959.56     |     186,024.88
Labour Cost Activity     |     39,735.36     |     39,862.80     |     127.44
Machine Cst Activty     |     41,611.75     |     43,153.01     |     1,541.26
That 'Inventory Change FG' entry is showing the GR posting updating actuals and not target cost. This is causing huge difference in target vs actual cost that will affect the profit and loss figures ultimately.
What am I missing here? What should I do to update the GR amount in Target cost as well.
Shirazi

Dear,
Target Cost on Production Order or Process Order is shown only when Variance is Calculated.
So please calculate the Variance, system will show the Total Target Cost.
Br,Vivek

Actual cost not updating in Pm order

Hi Experts,
We have a requirement from management for Having budget control based on department wise.
For that we are trying out substitution rule by which Pm order is replaced with Internal order .we are having a budget profile and budget for internal order.Now we are able to control budget and system stopping if budget exceeded in migo transaction .We are replacing pm order with IO order with substitution with pm order number range. Issue is after having this setting actual cost is not updating in Pm order and pm report.
Same is getting updated in mseg against pm order.
With regards
Anand.M

Hi Anand
Please add the budget profile at Plant maintenance order level no need to add any substitution rule
budget should also be control at order level
Thanks
trinath

VPRS - cost not updating with Subsequent Debit

We have an issue with the VPRS price in VF03 not updating if a subsequent debit is processed after initial vendor invoice and customer billing has been processed. (for third party processing)
There is no problem if a vendor invoice and subsequent debit is processed before customer billing. There is also no problem if if a vendor invoice and subsequent debit is processed after customer billing. There is only an issue when the vendor invoice is received first, then customer billing then subsequent debit applied.
Can someone describe how the VPRS on the billing document is updated in SAP? Any information on how to fix this would be greatly appreciated.

Hi,
In the order, the cost is generally taken from the valuation segment
of the material master. In the billing document, however, it may have
other sources. Depending on the business transaction, the costs can be taken from the goods issue of the billed delivery or, in the case of a
third-party order processing or individual purchase order, from the
respective purchase order, the goods receipt or the invoice verification in purchasing. As an example, only the goods issue will be mentioned here. However, the descriptions also apply to costs from purchase orders, goods receipts or invoice verifications. These costs are entered externally in pricing and included in the value of the VPRS condition. The amount is obtained by calculating back amount = value / quantity.
Thanks
Krishna.

Actual Cost not updating to Network Activity from CATS

Dear All,
Am back here for the expert suggestions / guidance.
I am facing issue with respect to system not updating the actual cost in network activity / projects posted through time sheet i.e. CATS. I have planned my resource cost through work centre assigned with activity type, formula and cost centre. I have kept the employee master data in place with maintaining the 315 infotype. In CAT2 i am posting the respective time sheet on the particular network activity and am transferring the cost into projects by CAT5, the plan cost is getting updated but actuals are not hitting the projects.
Kindly do the needful and suggest me if am missing something out of the track
Thanks
Praveen Mohanachary

HI Gokul,
There wasn't any error during confirmation and i have also checked in CN30 as well as COFC transaction. It is posting the time and the activity is getting the PCNF status set but there isn't any actuals posted. I used CATA for some activity and also used CAT5 for certain activity both are not posting actuals on projects.
Thanks
Praveen B M

Total Target Costs not updated in Process Order

Hi All,
I have a scenario in a Process Order,
The Process order is Released, Goods Issued and GR done. But the when i go and check the Cost Analysis i did not see anything in the Total Target Costs and Total Target Qty coloumns agianst all the cost elements. It show as zero for all.
It looks very strange. There is variance in the component issues and GR as well. I simulated for the same material with a new Process order and found the vales get populated automatically on GI and GR's with variation against requirement quantity.
Could any one explain me why it is so ..? or is my understanding is wrong.....?
Thanks for your time and patience.
Regards,
Srinath V

Srinath Venkatr,
I think you are missing PP CO integration configuration during master data creation. There might be information massage to you during process order creation saying , 'Logs during Cost calculation", you are skipping the same and creating process order withought resolving the same.
Check whether you followed all the steps for product costing.
Material master,
BOM,
OPKP:-Controlling area-activate components and Controll indicators
:- Assignment of co codes
KS01: Cost center
KA01/KA06:- Primary/ Secondary Cost elements
KL01:-Activity Types
KP26:- Activity Price Planning
Then Work center/Resource- assign these cost center and activities with costing formulas.
Then Routing/Recepi-
After master data, demand management,MRP- process order. while creating process order check cost calculation errors.
Hopes that will clear your dought
Tara

Planned delivery cost not updating Through Invoic02 idoc

Hi,
We are using Inbound IDOC (INVOIC02) to create invoice. The enhancement that we are looking to do is to use the indicator Goods/Service items + planned delivery costs which is seen when we manually post invoices using MIRO. Can you please let us know of any inputs in this regard.
For your information - the current functional module we are using to post invoices received through EDI is IDOC_INPUT_INVOIC_MRM and the message type is INVOIC. But this does not seem to help us in case of goods which has got a planned freight attached to it.
Thanks
Shasi

Hi Experts ,
Kaindly provide me your inputs ..
Thanks
Shasi

Target cost Not updated in Production order

Dear All,
when I save & release the production order system is not showing tgt cost. But once GR thas been done it is showing target Cost.
How can system should will show target cost without doing GR.

Dear Sainath,
It is the standard behaviour of SAP,that only making a GR for a production order you will be able to see the target cost in CO03 -
-->Goto >Cost-> Analysis.
IF the order is only created or released you will be able to see the data under cost --->itemization or else cost component
structure.
Under Analysis you will not be able to see any data.you can see the data's after making GR.I dont think some option to make the
data's visible before this.
Correct me if I'm wrong.
Regards
Mangalraj.S

Target costs not updated timely when order TECO'd

In June 27 I displayed process order xxx in COR3 - Cost analysis report with the status of TECO but the column Total target Cost has no values. In June 29, I again displayed the same but already find an entry in the Total Target Costs. Please advise why there was a delay in populating the target costs.

Hi vijay,
Is it normal that the variance calculation will take 2 days to finish the activity? Will you please specify what activity you mean as well.
Thank you so much.

Actual Cost & Quantity not update in Process Order

HI,
Process order confirmed from Production person before maintain the actity price rate.
hence those confirmation are gone in to the error & found in t.code COFC
afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
but still actual quantity & cost not updated.

Hi Ajay
'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
You may need to raise an OSS message incase the program is not available to download
BR,Ajay M

Not updating G/L account and cost center with BAPI BAPI_PO_CREATE1

Hello Friends,
The two fields G/L ACCOUNT and Cost Center is not updated using BAPI BAPI_PO_CREATE1. I am unable to understand why? This is what i am passing to account assignment structure( POACCOUNT). Filled POACCOUNTX structre as well. I have passed company code at the header level.
PO_ITEM = 00010
SERIAL_NO = 01
CREAT_DATE = sy-datum
GL_ACCOUNT = 621000
COSTCENTER = 1000
CO_AREA = 4000
Please let me know why it is not updating anything i missed while passing?
2>I need to update GR quantity but this field is not available in the BAPI ..Please let me know how to update this field.
Any help is highly appreciated.
Regards,
Raj

Hi, I have a problem I use the bapi BAPI_PO_CREATE1, I pass the table pt_poaccount in the parameter poaccount but the bapi when register my purchase order doesn't register correctly the values KOSTL, AUFNR, PS_PSP_PNR, NPLNR of the tablepoaccount and register the default values of the contract. Please i need help with this.
CLEAR s_poaccount.
     s_poaccount-po_item     = <fs_datos>-ebelp.
     s_poaccount-serial_no   = w_serial.
     s_poaccount-costcenter = <fs_datos>-kostl.
     s_poaccount-orderid     = <fs_datos>-aufnr.
     s_poaccount-wbs_element = <fs_datos>-ps_psp_pnr.
     s_poaccount-network     = <fs_datos>-nplnr.
     s_poaccount-activity    = <fs_datos>-vornr.
     s_poaccount-quantity    = <fs_datos>-menge.
     s_poaccount-net_value   = <fs_datos>-brtwr.
     s_poaccount-creat_date = sy-datum.
     s_poaccount-itm_number = <fs_datos>-ebelp.
     s_poaccount-co_area = '1001'.
     APPEND s_poaccount TO pt_poaccount.
CLEAR s_poaccountx.
     s_poaccountx-po_item     = <fs_datos>-ebelp.
     s_poaccountx-serial_no   = w_serial.
     s_poaccountx-po_itemx = 'X'.
     s_poaccountx-serial_nox = 'X'.
     s_poaccountx-creat_date = 'X'.
     s_poaccountx-itm_number = 'X'.
     s_poaccountx-co_area = 'X'.
     s_poaccountx-costcenter = 'X'.
     s_poaccountx-orderid = 'X'.
     s_poaccountx-wbs_element = 'X'.
     s_poaccountx-network = 'X'.
     s_poaccountx-activity = 'X'.
     s_poaccountx-quantity = 'X'.
     s_poaccountx-net_value = 'X'.
     APPEND s_poaccountx TO pt_poaccountx.
CALL FUNCTION 'BAPI_PO_CREATE1'
     EXPORTING
       poheader          = pe_poheader
       poheaderx         = pe_poheaderx
     IMPORTING
       exppurchaseorder = pi_exppurchaseorder
     TABLES
       return             = pt_return
       poitem           = pt_poitem
       poitemx         = pt_poitemx
       poschedule    = pt_poschedule
       poschedulex = pt_poschedulex
       poaccount      = pt_poaccount
       poaccountx    = pt_poaccountx
       poservices     = pt_poservices
       posrvaccessvalues = pt_posrvaccessvalues.
The BAPI is register with these values as default however i pass other values in table
pt_poaccount

Changes in poduction order,routing not updating in product cost estimate

Dear SAP Gurus,
i had done mto thru sale order and done some changes in production order,routing,and not updated the standard costestimate of newly updated can anybody tell me the procedure of updating the routings and production orders after production order released .
pls help me the standard cost estimate how to get updated while changing the routing,production order.
regards,
muralidhar putta

Hi Muralidhar,
Could you please share with us how your problem was resolved. It may help others too.
Thanks,
Manjula.S

G/L Account & the Cost Center not updating in BAPI_PO_CREATE1

Hi,
We are using BAPI_PO_CREATE1 for Service PO Creation.
The System is creating the Purchase Order, but it is not updating the G/L Account & the Cost Center.
We are passing the following parameters:
                wa_poaccount-PO_ITEM = '00010'.
                wa_poaccount-SERIAL_NO   = '01'.
                wA_poaccount-quantity   = '100.000'.
                wa_poaccount-GL_ACCOUNT = '0058120000'.
                wa_poaccount-COSTCENTER = '1000-LSG'.
                wa_poaccount-itm_number = '000010'.
                wa_poaccount-CO_AREA     = '1000'.
                append wa_poaccount to it_poaccount.
                clear wa_poaccount.
                wa_poaccountx-PO_ITEM = '00010'.
                wa_poaccountx-SERIAL_NO   = '01'.
                wA_poaccountx-quantity   = 'X'.
                wa_poaccountx-GL_ACCOUNT = 'X'.
                wa_poaccountx-COSTCENTER = 'X'.
                wa_poaccountx-CO_AREA     = 'X'.
                wa_poaccountx-itm_number = 'X'.
                append wa_poaccountx to it_poaccountx.
                clear wa_poaccountx.
Please guide how to correct the error.
Regards,
PK

Hi,
Thanks for the reply.
We are passing the following parameter in POITEM.
                  clear wa_poitem.
                  wa_POITEM-PO_ITEM = '00010'.
                  wa_POITEM-PLANT = '1003'.
                  wa_POITEM-TAX_CODE = 'S1'.
                  wa_poitem-MATL_GROUP = 'SER04'.
                  wa_POITEM-ACCTASSCAT = 'K'.
                  wa_poitem-ITEM_CAT   = 'D'.
                  wa_poitem-pckg_no    = '0000000001'.
                  wa_POITEM-SHORT_TEXT = 'Freight Service'.
                  append wa_POITEM to it_POITEM.
                  clear wa_poitemX.
                  wa_POITEMX-PO_ITEM = '00010'.
                  wa_POITEMX-PLANT = 'X'.
                  wa_POITEMX-TAX_CODE = 'X'.
                  wa_poitemx-MATL_GROUP = 'X'.
                  wa_poitemx-short_Text = 'X'.
                  wa_POITEMX-ACCTASSCAT = 'X'.
                  wa_poitemx-ITEM_CAT   = 'X'.
                  wa_poitemX-pckg_no    = 'X'.
                  append wa_POITEMX to it_POITEMX.
Please guide.
Regards,
PK

Cost center is not updating in IT 0001

Dear Mates,
I've uploaded two sets of data using PP02 T-code where one is Historical data & the other is Current data. Here for Current data I'm facing a Issue where Cost center & org unit's data aren't getting updated in IT 0001 & its still showing the Historical data in IT0001. This is even spoiling the show & frustrating, where users are unable to do CATS Reconciliation also. for more clarification kindly find below screenshots.
PO13
We have maintained historical data in system where one cost center is assigned from 01.01.2013 to 31.03.2014 & second cost center is assigned from 01.04.2014 to 31.12.9999 with current period, not only cost center's but also Org unit's are also not updating in the system. I've even tried with RHINTE00,10,20 & 30 program's but still I'm unable to get the desired results.
Historical data from 12.11.2013 to 31.03.2014 in IT0001
Current record 01.04.2014 to 31.12.9999 in IT0001
Kindly let me know how to update IT0001.Is there any std program available to update the data apart from RHINTE**???
Ur's
Mohan

Dear Mohan,
Try assigning your cost center to position it will default both your org unit and cost center.
Cheers!

Cost Center not updated in accounting documents generated in SAP RE-Fx

Hi Experts,
I'm facing an issue wherein I don't see the cost centers getting updated in the accounting documents generated from RE postings.
Pl. note that the appropriate cost center (relevant to the cost center) is maintained in the rental objects.
What is the customizing settings I'm missing out due to which I don't see the cost center updated in the accounting documenmts?
Thanks & Regards
Shantanu

HI Shantanu,
As far as I know, in RE-FX we can post the cost to the RE object directly. All the objects in RE-FX (i.e. BE, BU, PR, RO, RECN, SU, etc) are cost objects in themselves. However, to post the cost to Cost centers you will need to run the CO settlement. Again CO settlement rule is available in all these objects.
Please refer the SAP Library for further explanation:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/00/80383b1b793821e10000000a114084/frameset.htm
Regards
Rohit

Cost not update

Similar Messages

Maybe you are looking for