Cost of Data Mininf option

Any idea how much the data mining option in Oracle 9i costs?

This being a technical forum, is not appropriate for pricing discussion. Please contact your Oracle Sales representative for more information.

Similar Messages

Data Recovery Options?

In the process of transferring from a POP3 Account to IMAP, I deleted a POP3 Account and lost a lot of email's I still need. I've seen some data recovery options such as File Salvage, but I'm wondering if there are any cheaper options out there? Thanks for the help.

What an awful thing to have happen! Especially on such a special and happy day! You have my deepest sympathy.
From what I understand, as long as the data has not been overwritten, you should be able to recover it. I will have to let the explanation of how to do this rest with people more knowledgeable than I am, as I have never had occasion to have to do this. But I have no doubt that they will post the appropriate resources.
I have been told that the only way to destroy a hard drive so that you can't recover the information is with a hammer. That said, it could still be costly. But unless your new backup partially wrote over some of your previous backup, it should be recoverable.
Good luck, and have a happy honeymoon--don't let this spoil it! And the best of everything for your future!

Cost Centers Date

Dear Experts;
The FI consultant has created the cost centers with the Go Live date, and as you know the employees are hired from a previous period, so I have to create the positions with the hiring date.
So I've created the positions with starting date 01.01.1990, while the cost ceneters are from 01.07.2011, so whenever i'm trying to assign a cost center to a postion it gives me a msg stating that the cost center doesn't exist with that period.
And there is no option for the FI to change the cost centers date, he just has to delete the current ones and create new ones with another date.
Do you ahve another solution for that?
Regards;
Lobna

Hi Lobhna,
As a practice positions and cost center should have the same date if position date is go-live date then it would have been fine.
To avoid this issue all employees are hired in 9999999 default position and before Go-live there is an action Named as Go-live data upload where the actual positions of the person are assigned from the date of Go-live.
One is hiring action with D.O.J of employee and then another action Go-live data upload which sets a cut-off date for Masterdata that all masterdata will be valid from the Go-live date onwards.
In your case if you have already done the Hiring action with actual position, then ask FI if he can delete and re-create the cost centers from date of Go-live and if not then you can delete the assignement of the position with the person in po13, you can do this through LSMW or BDC. After deleting assignment you have to delete the positions through PO13 LSMW.
Then Re-create the positions again with the Go-live date and assign to Person.
All this through LSMW PO13.
Hope this helps.
Regards,
Prabha

OWB Paris, 10k$/CPU for Enterpr. ETL and 15k$/ CPU for Data Quality option

Hi,
I just heard that the licensing model changed completely with OWB 10g R2 (Paris).
As far as I get informed Warehouse Builder is now shipped as part of the database and for each Database (development, test, production...) you have to license the required option.
The 2 main options are the:
-Enterprise ETL Option which costs 10'000$ pro CPU
-Data Quality Option which costs 15'000$ pro CPU
This means that from now on you pay for OWB with the the Enterprise ETL and Data Quality Option as much as 50% of what you already pay for the EE DB license with the partitioning option.
So what's your opinion to this new licensing model?
Regards
Maurice

Hi Maurice. It seems like Oracle is trying to reduce number of licenses with the OLAP option, since it should be possible to have both OLTP and OLAP systems in the very same instance.
In the other hand, Oracle seems to want more money for "advanced ETL options", such as scheduling, metadata management, bla bla bla...
But those "advanced" functions seems to me as something every ETL tool should provide. For free...

Report help for multiple Date Select options

Hi Friends,
For a particular year wise report, the client wants 12 date select-options which are changeable and informal every year .The report will also be displayed as per the given date selection period wise. Please help me how to fetch the datas from the table as per the given selection period. Currently the report have one date select-option where the user gives selection range as 1.04 to 31.03. It's related to EB power consumption report and hence the new requirement on date selection which are informal and not a fixed date of every year.
Ex:Selection-Screen
Period 1 : 08.04.2008 to 12.05.2008
Period 2: 12.05.2008 to 20.06.2008
Period 3: 21.06.2008 to 28.07.2008
Period 4: 29.07.2008 to 15.08.2008
Period 5: 15.08.2008 to 21.09.2008
Period 6 : 21.09.2008 to 14.10.2008
The data will derive as per the above selection ranges.......
Please advise with example.
thanks & regards
Sankar.

>
sankar babu wrote:
> Ex:Selection-Screen
> Period 1 : 08.04.2008 to 12.05.2008
> Period 2: 12.05.2008 to 20.06.2008
> Period 3: 21.06.2008 to 28.07.2008
> Period 4: 29.07.2008 to 15.08.2008
> Period 5: 15.08.2008 to 21.09.2008
> Period 6 : 21.09.2008 to 14.10.2008
Hi,
In this case just derive all records matching dates between 08.04.2008 (low in first select-options) and 14.10.2008(high in last select-options.
Also my advice is to use a single select-options and prompt the user to give the dates as ranges in the multiple entries dialog which can be opened by clicking the button on the right side of the select-options.
Regards
Karthik D

Select schemas from relational model on import from data dictionary option

Hi All,
I have one relational model with 3 diferent schemas,
I want to compare one of my schemas with the data dictionary I have in a database,
I select the import option in the general file menu, select from data dictionary option,
select the connection from my database,swap target model checked,select a physical model and select the objects i want to compare from the database,
My problem is that the result is the comparison between all the objects in my model and the objects in the database that I have selected,
what I really want is to compare a list of objects in my model to a list of objects in my database,
this could be possible? or always need to compare all the objects of the model?
Thanks in advance

Hi jbellver,
there is no any development in DM 3.1.0.691 on that problem. In production release you'll be able to compare objects in subview with database or just to select several objects and compare them with database. And of course "generate in DDl" filtering still can be used - it works at "Compare dialog" level.
Philip

No Data Found Option in BI Publisher Report

Hi All,
Could you please help me.
I am looking for NO DATA FOUND OPTION in BIP Report.
Ex -
In the body of the report, I will write simple select statement
Select * from emp;
If the table do not contain data the out put should display " NO DATA FOUND IN THE DATA BASE"
Can some one help me on this....This is a sample query actually my sql query contains 100+ lines.
Please help me,

Take a look at these:
http://winrichman.blogspot.com/2009/05/no-data-found.html
http://blogs.oracle.com/xmlpublisher/2007/06/no_data_found.html
Also, search the forum. This has been covered before.
Thanks,
BIPuser

Can i have html code for date select options (SEARCH HELP)

Hi frinds,
I have a BSP Page with input as date.
Can i have html code for date select options (SEARCH HELP)
Moosa

Hi
Please find the sample code below.
FROM DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X" <- Search help
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
                        value     = "<%= w_FROMDATE %>" />
TO DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X"
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
value     = "<%= w_TODATE %>" />
Thanks
kalyan

Iphone 5 - "use cellular data for" option only shows Facetime and Passbook

I have an iphone 5 and I am trying to manage my cellular data usage,
When I go into Settings - Cellular and I look at the "use cellular data for" option, there are only 2 apps on the list Facetime and Passbook.
I have seen other posts online that show a long list of apps that you can toggle Cellular data on and off.
How can I see a longer list of apps.

In Settings/General/Restrictions if you tap on Cellular Data Use there should be 2 options: Allow Changes or Don't Allow Changes. If you don't see these options is that where you see "Cellular data is turned off for 'Setting'?
Do you have a corporate MS Exchange email account on your phone? If so your administrator may have added an override on this setting.

Status of transfer (shipment costs header data)

Kindly explain it to me in general language,
Status of transfer (shipment costs header data)
This status describes the stage of forwarding for a shipment cost document.
Use
The status is determined by the system and cannot be changed manually. To determine the status, the system cumulates the item statuses. The following rules apply:
Item | Status
000001 | _ | A | B | C | B | C | C | C
000002 | _ | _ | _ | _ | A | A | B | C
Header | _ | A | B | C | B | B | B | C
You can select shipment costs that have reached a certain forwarding status.

Dear Pradeep,
the matrix describes how the header status gets calculated when the cost document has two items.
The header status is a cumulation of the item status. This is valid for the calculation, accounting and
transfer status!
Example:
If item 00001 has status 'C' and item 00002 'A', the header status will be 'B'.
Item | Status
000001 | _ | A | B | C | B | C | C | C
000002 | _ | _ | _ | _ | A | A | B | C
Header | _ | A | B | C | B | B | B | C
Regards,
Tom

Problem With Nokia 6300 USB DATA CABLE OPTION Not ...

Hi, I have a Nokia 6300 v.5.00. My problem is when
I connect my phone using a mini usb cable to the pc, USB Data Cable option on my phone is not highlighted, so I can't use the pc suite mode functions etc. I tried 3 different computers with Windows XP SP3 and 3 different good quality mini usb cables but still to no avail. The options like data mode, nokia pc suite mode still doesn't seem to appear. I also tried different USB slots in these 3 computers still no luck. Can anybody tell me what's the problem? Is there something wrong with IC on my phone or something? What drivers do I need? This is my first time using the mini pop port on THIS phone, I've been using bluetooth to transfer files but it's so slow. Please help

Hey guys there is a solution with you problem and it works fine for me now. After all the comments & suggestions i read i finally got the best solution for all of you. This can be very simple. Try to install the Nokia PC Suite v7.0.2
in your pc after that try to search & find the Nokia USB connectivity cable driver v6.8.2 in the web if u get it. Then uninstall the usb connectivity cable driver v7.0.2 in the CONTROL PANEL ADD/REMOVE after that install the "usb connectivity cable driver v6.8.2 in ur PC then try to plug in your Nokia 6300 it will install automatically ur phone. PRESTO your unit can be now Recognized of your PC.
THAT's ALL FOLKS!!!

Format % in chart label when Data Label Option is 'Show Series and % value'

I am using:
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
I have a report that returns 2 columns 'Repair Status' and 'Count' The graph is a pie chart and I have selected the Data Label Option as 'Series Label and % value'. The percents displayed in the label have no consistent format. Sometimes 2 decimal places, sometimes 4 decimal places. I want the chart label to consistently display the % in the chart label with no decimal, i.e. 96%. How can I accomplish this?

Hi,
Where you selected 'Select Label and % Value', there is a button at the bottom, Format Data Labels. In there, there is a Number tab where you can play around by selecting Currency, Percent, etc. Have you tried this?
Cheers.
Mahesh

How to access Data Guard option in Oracle 10g OEM

Hi All,
I have Oracle 10g ENTERPRISE EDITION on Unix envoirement. I want to setup logical standby Database through Data Guard technology. But when I brows through OEM I do not find Link for DATA GUARD????
1) How to access Data Guard option from oracle 10g OEM.
2) Does It come with Enterprise Edition OR I have to install it separately.
Regards,
Darshan

I am managing almost everything through EM Grid Control. It is easy to setup and configure.
Anyways, if you have read the documentation on
Oracle® Data Guard Concepts and Administration and setup your environment accordingly then you should not have any problems. Atleast I can assure you that your production database will not be affected by it.
Just make sure that you follow each step and read thoroughly. If you have spare machines then you can test and record your configuration before performing it on your production db. This link will provide you with the information on DataGuard.
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/concepts.htm
If you think that way then you will never be able to do any new stuff since you will always fear that something might go wrong. Go ahead pal, try it on test machines and you will know that it is not that difficult.
There are real experts who help people like us in this forum and I know that they are doing a pretty good job.
All the best.
Rgds
Adnan

Problem while using KEKO(Product Costing - Header Data) table in the report

hi,
below is the slect query i have written.
while accessing the table KEKO( Product Costing - Header Data ) .more time is taken.
is there any alternative other than KEKO table when using in my report.
      SELECT FEH_STA VBELN POSNR FROM KEKO
           INTO TABLE IST_KEKO FOR ALL ENTRIES IN IST_VBAP_KEKO
           WHERE KALNR = IST_VBAP_KEKO-KALNR.
regards,
DILIP.

Hi Dilip,
Before going for any other table,
As Kalnr is only one of the primary keys of table KEKO, You can try creating secondary index on KEKO, which might help in improving your report performance.
Also, you can add more conditions in where clause if possible, which will also help in improving performance.
Thansk,
Archana

Delete cost distribution data(infotype 1018)

hi all,
i have a requiremment. i have to Delete Cost Requirement Data (infty 1018) at mass level.
how would i do that?
thanks
Sachin

Hi Sachin,
To delete Infotype Data from the Personnel Planning Database... You can use the Program RHRHDL00 (Last two Characters are zero)
Go to SE38 >> RHRHDL00 >> Execute
CAUTION:
On the Screen,
1. Mention the Plan Version
2. Mention Object Type - You can MAINTAIN THE LIST HERE.... (As IT 1018 can be maintained for Work Center, Org Units, Position)
3. Maintain the Infotype you want to delete (In your Case it is 1018).
4. If this was used for any other infotype which has a Subtype, then maintain the subtype (For Eg: For Relationships INfotype, you want to delete A008 relationship then maintain 1001 in Infotype and A008 in subtype).
****IT WORKS PERFECT... BUT DO THIS AT YOUR OWN RISK.....ONE HAS TO BE VERY CONFIDENT WHILE EXERCISING THIS PROGRAM.....
MASS DELETION.. Done !!!
All the Best !!!
Kumarpal Jain.

Cost of Data Mininf option

Similar Messages

Maybe you are looking for