Cost Of storage location

Hi guys,
can anyone tell me the in which table cost of storage location will be stored.
Thanks & Regards,
praveen.

Sandy,
For those companies that do need to track the cost of each bit of FG stock, the standard SAP solution is Split Valuation.  You can establish multiple prices for a single material, based on, say, in your case, source of supply.  When material is received into stock in the originating plant, it is assigned to a batch, which has its own valuation type.  When the batch is then moved into Mumbai, it retains its valuation type, and its standard cost.  In your case, you could create four valuation types for each FG material: PUNE, DELHI, GUJA, CHENN.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/63314d43a211d189410000e829fbbd/frameset.htm
FYI many companies don't even bother with such details.  For such companies, they value their finished goods using moving average, since the differences between costs at different sources is not significant enough for them to track.
Rgds,
DB49

Similar Messages

  • Shipment costs and storage locations

    Hello gurus,
    I have got two questions concerning shipment costs:
    1. In my POs I would like the system to automatically find a condition for shipment costs (e.g. 10$ per item or 100$ per PO), so that I do not have to enter them manually. Obviously the ammount should depend on the vendor, material etc. All I found up to now are condition types FRA1 and FRA2, but both of them are manual condition types. Isn't there any way of automatically determining shipment costs in POs?
    2. One of our vendors does not charge any shipment costs, if the value of all items for one storage location exceeds 200$.
    Example:
    item   value    storage loc.
    0010   10$      1000
    0020  180$     1000
    0030   20$      1000
    0040   50$      1100
    No shipment costs are charged for items 10-30, because the overall value of the three items is 210$, but for item 40 shipment costs are charged, because the item is for a different storage location.
    Is there any way to generate this behavior in SAP?
    Thanks in advance
    Alicia

    You can automatically enter the shipment cost based onthe vendor and material
    1) you can enter them in the info record so it would be defualt in the PO. in this case you don't have to enter manually but this will be not check your PO item value
    2) you can create the conditon in the m/06 as like freight conditon and create the access sequence based onthe combination you want e.g. vendor and material and enter this access sequence in conditon type oyu have created and maintian that in your pricing so sytem will automatically determine the moment you create PO for this vendor and mateirla combination
    but as per your secind scenarion where you have to do the total and than determine that the shipment charge is applicable or not
    this will required custom logic to populate the conditon based onthe calculation of the item level total.
    use the user exit MM06E005

  • How to determine a cost center based on a storage location

    Hi all,
    During material movement or stocked purchase, I need to determine different cost center by storage location. Therefore, i can't use OKB9 because the plant criteria is not enough.
    Is there any user-exit or another solution i can implement to solve this problem?
    Thank you for your answers.

    Hi
    As i said earlier, you can use MSEG itself in your substitution rule.
    For  Ex:
    Pre- requisite
    BKPF-BUKRS = 'XXXX' AND BKPF-AWTYP = 'MKPF' (and anyother criteria that needs to be applied)
    Substitute
    Field - Material (MATNR)
    is substituted by "EXIT"
    Create your own exit here & give your logic like
    If MSEG-LGORT = '0001'(your storage location values)
    then BSEG-KOSTL = 'CCTR1'.
    Let me know if you need any further details.
    Thanks
    Kalyan

  • ME21N: COST CENTER DETERMINATION BASED ON STORAGE LOCATION

    Hi,
    When creating a purchase order (ME21N) I need to determine the cost center based on storage location. How can I solve this problem?
    If the solution goes through creating an USER EXIT, please, have in mind that my knowledge about ABAP is really poor.
    Thanks in advance.
    Luis Álvarez.

    Hello Priyanka,
    first of all, thanks for your quick response.  By COA I suppose you mean Controlling Area.
    Secondly, isn't possible to implement something like this for purchase orders?:
    https://forums.sdn.sap.com/click.jspa?searchID=18930382&messageID=6494959
    Regards,
    Luis.
    Edited by: LUIS ÁLVAREZ on Nov 20, 2008 8:28 AM

  • MIGO - Goods issue to determine cost center based on storage location

    Hi Experts,
    Any idea how to determine the cost center based on the storage location instead of from tcode - OKB9 when creating Good Issue via MIGO_GI?
    Points will be awarded for useful solutions. Thanks.

    Hey Janet,
    A Cost center cannot be determined from an SLOC..it si always at the company code and valuation aea level

  • Assing a cost center to Storage Location.

    Hi experts,
    I need help for assign a cost center to one Storage Location, how I should do???
    Thanks!

    Hi,
    As guys above already wrote - this is not something that you do in SAP. The question to you is: WHY you think you need to do such assignment? What do you want to achieve?
    Regards,
    Tomek

  • Material Transfer from cost center to storage location

    Dear Experts,
    Can anyone please tell me what is the movement type for transfer posting of material from Cost center to storage location?
    We have bought materials for certain cost centers, but we didn't use all our materials and we would like to put it again in our stock.
    Can anyone help me for this issue?
    thanks in advance,
    regards,
    Ahmed.

    Hi,
    1. If you bought the goods with "K" account assignment PO, you should cancel the GR (MBST or MIGO). After that you can receive the parts as stock items and post GI (MIGO + 201 / MB1A + 201) against cost center with the quantity you really used from them.
    2. If you received the goods into unrestricted stock (GR against PO with no account assignment, MIGO + 101 ) and later you posted GI for cost center (MIGO + 201 / MB1A + 201), you can do the reverse movement (no cancellation!; MIGO + 202 / MB1A + 202) and this way receive the remaining goods into stock.
    You can also use MIGO + 202 in case of point "1", but cancellation and after that GI with already consumed qty would be the exact solution I think.
    Regards,
    Csaba

  • Storage location cost

    Dear experts ,
    I incur some cost for holding the inventory in a storage location . How can i map this ?
    Regards
    Anis

    What do you want to do with "cost for holding the inventory in a storage location"?  Normally it would be treated as part of the warehouse overhead, that is, one of the warehouse running costs.  You can include storage costs on the MRP as part of lot size calculations, but it does not result in an actual cost.

  • Profit centre at storage location level

    Hi Experts,
    Can we define a profit centre @ storage location level?
    My scenario :
    The document splitting of FI is activated for the document type of FI and also the profit centre is mandatory entry for any accounting document that will be created so when I am trying to post a MIGO I encounter the error
    "Balancing field "Profit Center" in line item 001 not filled"
    We have a option of maintaining a profit centre in plant data/storage location but i will be updated in the profit centre field of Costing1 view . But we does not want to upadate in costing view of material master data.
    Basically We want the system to determine profit centre based on storage location  in Goods reciept transaction .
    Helpful Sugestions on this would be helpful & rewarded max .
    points.
    Regards,
    Patil
    t

    Hi Raju ,
    Thanx for the reply.I am Basavarajs Collougues.
    Our Enterprise Structure of our Client is as follows
    One company code is assigned to one plant and we have treated all the branches across India as Storage locations.Each  Branch (Storage Location- MM) is configured as Profit centres in FICO.The goods are procured for a storage location.
    By using the functionality of document splitting, the profit center field is made mandatory for all the accounting documents generated in the system. Now we are trying to post a goods receipt against a Purchase Order, the system is giving error "Balancing field "Profit Center" in line item 001 not filled"
    The option is there to maintain a profit center at the plant level.But we have several storage locations under the plant and each storage location has to be linked with the particular profit center. So that, while doing goods receipt the system should determine profit centre based on the storage location in purchase orders.
    Please suggest on this.
    Regards,
    SVU123

  • Storage Location for NON valuated material in MIGO

    Hi friends ,
    I have created a purchase order for NON-Valuated material (UNBW) with Account Assignment "K".I did check the material type UNBW configuration where only Value Update is checked for my Plant.
    Now at the time of MIGO , system is asking for Storage lcoation (mandatory) and after MIGO system also updates quantity in Storage Location entered in MIGO.
    while in normal cases (like ROH material type) , if we create Account Assigned PO ( like K) , system neither ask for Storage lcoation at the time of MIGO , nor system updates Qty at any storage location.
    As per my understanding , if we create Purchase Order with account assignment K , system updates value in consumption and doesn't update Qty in stock (although material is stockable) .....which is simply like immediately issue of material to cost center.
    Therefore wondering why system is updating Qty for NON-VALUATED material.
    Does non valuated material means , POST value to Cost center (for account assignment K) and Update Qty in stock ?
    Like in case of Account Assignment , value gets charged to WBS and qty gets updated as special stock "project"
    All replies are welcome .....
    Regards
    Shrey

    By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

  • Inspected stock posting to multiple storage location without batch

    Hi,
    At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
    Quick response will be appreciated.
    Anandkumar KS

    The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
    A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use.  You obviously aren't using the 553 movement type as that writes off the material.  That could give you two lines to use for your scraping.  I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today.  If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
    Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
    You can also change the displayed names of the stock posting lines.  That's explained in the config file as well.
    Craig

  • Storage Location Stock transfer with value also transfered to a diff G/L Ac

    Hi all,
    In my scenario, I have to post a Sloc to Sloc mvt with regular 311 one step, but this does not have any FI impact. What I need is to to a transfer of storage location but also, the value of the transfered stock should me moved to a different GL account. any ideas on how to map this? I'm thinking of creating a new mvt type but not sure on how to define the FI part.
    All ideas are greatly appreciated.
    Regards

    Hi,
    With Different GL Account I mean for example I have 10EA of material X at cost of 10 in SLoc 1000, that means my total valuated stock is $100 and the same is on GL Acc 135010
    I want to do something like a "311" and move 5 EA of this material X to SLoc 2000, and the result should be
    5EA in Sloc 1000 ---- GL Account 135010 $5
    5EA in Sloc 2000 ---- GL Account 135020 $5
    Both Storage Locations are in the Same plant
    as per my knowledge G/L account determination take place at valuation class of material not storage location level
    second at storage location we have physical stock only not any material valuation
    material valuation will take place at plant level ,you know it.
    might be split valuation will help you for different price search in forum for split valuation where we can assign different valuation class and different G/L for one material
    Regards
    Kailas Ugale

  • Error while executing MFBF for HU storage location

    Hello Experts,
    Can you please explain me the step by step process as how to perform Backflush for materials stored in HU managed storage location. I am trying to do this for a make to order 'sales order' but I get error "Receving storage location 0200 in plant 2000 is HU-managed".
    I need to do this for HU managed storage location(0200) but I get above error when try to save the document. Please let as what exact steps i need to follow to do GR for the above.
    Your help is highly appreciated.
    Thanks,
    Sharan

    Hi Caetano,
    Thanks for the reply but what i have seen in our production system in Transaction MFBF is showm in the document display and it has Handling unit assigned to it and also it is posted against an order (order has been created only for costing purpose). I have attached screen shot below.
    I am new to REM process, Can you please share me the steps how this is done or any documents or any link to understand how process is done.
    Thanks,
    Sharan

  • MM Transaction did not flow to PA - specific storage location with mvt 945

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

  • Can we block a material for particular storage location ?

    We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
    Please share ur view.

    Hi,
    If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
    Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
    Pls reward if found useful.
    Regards,
    Indranil
    Message was edited by:
            INDRANIL BHATTACHARYYA

Maybe you are looking for

  • Keystore access in Java Mapping Program - user J2EE_GUEST

    Dear Gurus, I have the following problem: I need to validate the digital signature of a XML document and I'm using some examples provided by SAP as follows:           InitialContext ctx = ctx = new InitialContext();                     Object o = (Ob

  • JSF error message: Automatic prompting for file download

    This is a weird problem. I have a JSF application wherin I popup a new window on a submit button. The window opens a test.jsf page that redirects the output to a servlet1. Servlet then based on some parameters does a sendRedirectI() to different serv

  • Next Zen Micro Firmware Suggesti

    I thought it would be a good idea to have a section where people can put in their ideas for new zen micro firmware updates, as for myself i have 2 . when you select "random play all" from the DJ section it sets your micro to play in shuffle mode, the

  • Failing Search String in EBS through IDOC

    Dear All, we upload our EBS through idoc processing of type finsta. The problem is that for a particular bank theres a search string attached which will replace the posting rule if a certain but fix narration (say "Trf 66852")  is received in note to

  • Where do I put pdfs on Samsung Galaxy SII so I can view them using the Adobe Reader App?

    I have PDF files on my PC that I'd like to view on my phone.  I downloaded the Adobe Reader expecting a folder to appear that I could copy these PDFs to.  Rather like with Kindle.  It didn't. Where do I put the files so I can display them using the A