Cost of Using WLAN with X6

I'm still the delighted owner of an X6!
In the first month of using my device I've used the internet via my own wlan and a nearby access point (BTFon) so that when I go on holiday I'll know how to check emails etc at no cost to me. I've just got my O2 bill and found that in fact I've been charged for using the wlan which is something of a surprise. It's really not a lot of money but when you expect no charge at all..............
Have I failed to set something correctly? I can't imagine that if I'm using my device over a wlan connection correctly that O2 would even be aware.
My second point is to ask if I should be concerned about security whilst surfing with my X6. We all use security software on our pc's at home. What if anything should I do about security when using my X6?
Many thanks,
Colin

If you don't want to use mobile data, remove all access points in destinations (in the connectivity section of settings) except wifi, you cannot be charged by your data provider when using a wlan connection !!
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Cost of using WLAN on E71

I have an account which allows me to use the internet for a certain amount of time in a month, and more than that costs extra. When my E71 is connected to internet by WLAN, is it seperate from this account, ie, its free, right?

My understanding of your questions is as follows: you have a mobile phone contract which gives you a set number of 'free' minutes/hours each month for accessing the Internet, and also probably a set number of 'free' minutes and texts. Whenever you use more than your 'free' amount you are charge additional money over your normal monthly contract rate.
WLAN, or WiFi, is separate to your monthly mobile contract - i.e. you are not using your mobile provider's mobile/cellular network.
If you connect your phone via a WiFi access point (WLAN or Wireless Local Area Network) then you are NOT using your mobile/cellular access time. This is the same as using your PC on the WLAN.
This assumes that you're on your own WLAN connection or a free WiFi hotspot.
If you're outside and you connect purely via your mobile using 3G (mobile data connection) then you are using your free internet time and anything over your monthly allowance will be chargeable.
Hope that helps!
David

Does it cost to use facetime with my ipad in china?

I am leaving for China in a few days and would like to facetime with my ipad while over there. Is there a cost to do this if internet is included in my hotel package? Am I able to do this since I won't have a VPN, maybe?

There is no cost to Facetime no matter where you use it. Facetime works over WiFi, so if you are not paying for the WiFi, there is no cost at all. You don't need a VPN to use it.

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

If i buy iphone 5 from the usa can i take it back and use it with my UK O2 sim card and how much will a 16gb iphone 5 cost

Hi,
if i buy iphone 5 from the usa can i take it back and use it with my UK O2 sim card and also how much will a 16gb iphone 5 cost in the usa?
thanks
Andy

hi there,
you could buy it somewhere in Europe. I know Apple sells them unlocked here in Germany and if I am not mistaken also (among others) in France and Italy.
Yet, as Peter wrote, the warranty can become a problem. Not sure whether a one country only rule goes for the European Community as well though.
As for the price, the 16 GB model costs 679,- € (equals roughly 550 £). Currently there is an average delivery time of 4 to 5 weeks.
LTE connections will not work with Orange or Vodafone. Only EE is about to offer a compatible LTE network. DC-HSPA and regular HSPA+ will work fine.
regards, Chris

I dropped my macbook pro and the screen is broken can i still use it with an external monitor? Or can I or how do I transfer hard drive files to my mac mini?

I dropped my 17" macbook pro and the screen is broken. Can I still use it with an external monitor? When I plugged it into a monitor I had used it with before, I'm not able to see anything on the macbook screen to control it. It came on but I just got the blue screen with nothing else after typing in my password. (Didn't see the password form just assumed it was there somewhere and it did go from space to blue screen but no desktop icons, files, dock strip at top or anything else, just blank blue screen) so I can't access the system preferences.
Or can I / or how do I, transfer hard drive files to my mac mini? If not salvageable as is can I pull out the hard drive and make it an external harddrive? In otherwords is anything salvageable? It seems it's coming on I just can't access anything. BTW I was told it would cost aprox $1000 to replace the screen! I paid almost $4000 for this thing and it was running great - makes me sick to lose it!

I'd like to promise you that everything will be fine if you just get the monitor going - but it's hard to know what the hardware damage might be. It might be the monitor, or the damage might be greater.
Your best solution would be visit your local Apple Store and let them know what your situation is. They have access to diagnostics you don't, and they might be able to the best way to save your data and keep you computing. It's still not covered, but they can tell you what your current options are.
Um, you might consider investing in a backup drive.
And there other repair options, too. Powerbook Medic http://www.powerbookmedic.com/xcart1/pages.php?pageid=67 offers reliable repairs, and quotes prices well under Apple's.

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

Product cost by sales order with Valuated Sales order stock

Hi Gurus,
I am working on Poduct cost by Sales Order with Valuated stock. but i have doubt ragarding to Cost estimation.
1.In sales order scenario also Standard Cost estiamtion (CK11n and CK24) and Marking, Releasing is Mandatory? if not how can we estimate the cost?
2. If we are estimating the cost by using Standard Cost estimate, when can we estimate the cost?
can anybody please give me the steps which we are following in Poduct cost by Sales Order with Valuated stock from starting to end Settlement
Thanks&Regards
Prasad

Hi,
there are 3 types of scenarios in MTO.
In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver. Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
Please let me know if you need further details in this regard
Surya

Trying to access WLAN with no phone connectivity ...

Hi,
I have a c3 which I use to access the internet with WLAN. No problem in the house as the signal from my WIFI is good, however when I enter a room with no phone connectivity (no network coverage) I can't connect via WLAN. The message "Packet Data not allowed" comes up.
I just don't understand, why does it need phone connectivity to use WLAN. I thought the whole point on WLAN was to access via an alternative source, Can anyone help?
Thanks
Hattie

If you're outside the WLAN area, the device wants to make a Packet-data (gprs) connection. Ask your provider for the right settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

VPRS incorrect cost when using Split Valuation

Hello,
We are using split valuation thus each valuation type has a separate moving average price. When creating a billing doc, my pricing procedure is called which includes VPRS. The problem is the cost returned is not for the correct valuation type which is passed in the billing document (Field BWTAR). The cost returned in pricing is the moving average without any valuation type. Does anyone know of any configuration to calculate VPRS based on the batch/valuation type provided in the billing document?
My pricing procedure includes condition VPRS which is set to SUTOT = B, Reqt = 4 and statistical. The condition type is set to defaults (Cond Class = B, Calculation Type = C, Condition Category = G). The article master has field Price Control set to V and split valuation is enabled.
The billing document type being used is FP (POS Interface)
The item category is DLN
Any help would be greatly appreciated.
Thanks,
Pierre

Hello Pierre
I am not totally knowledgeable on this subject but want to give my best shot.
I think you need to ensure that the system takes (redetermines) the cost from Valuation segment in the material master.
1) So make the cond category a T (Moving price). Don't change VPRS but copy it and set up ZPRS and then use it in the pricing procedure as an alternative to VPRS.
2) You may also need to work on the copy control- Item cat level- especially Pricing Rules- Probably you need to set up a custom one which says 'keep manual prices as they are, but redetermine cost". Then you need to set up USEREXIT_PRICING_RULE from Program RV61AFZA to make this work. . Use OSS note 24832 to set up your new pricing rule.
3) Also check out 'Price Source' field- in copy control again- to see if it helps you achieve your objective.
Also about VPRS, OSS note 547570 says "If the condition control (KSTEU) is set to 'H', the cost was taken from the goods issue. If it set to 'A', it was redetermined from the valuation segment of the material master, in case of 'D' or 'E' it was copied from the preceding document:. But I don't know how you can use this information.
Go through these OSS notes and those mentioned within for a good idea of VPRS.
372772 - How does the system determine the cost?
547570 - FAQ: VPRS in pricing
24832 - Pricing rules / TVCPF
371844 - Correction of incorrect costs
372760 - Several problems with VPRS
Hope this helps, Let me know.

Is it possible to use servlets with portlets?

I am building a Java portlet that will update a user's OID repository data. We are using it to provide a more user-friendly interface than the default Oracle "My Account" link on Portal.
That portlet is made up by a JSP that submits the information to a Servlet that, in turn, forwards it to another servlet (using RequestDispatcher) that does the actual OID update and then it should redirect the page flow back to the original JSP to show the user a confirmation message.
Things run fine up to where the OID entry is being updated correctly, but I am unable to redirect the flow back to the original JSP.
JSP ----> Servlet ----> Servlet
^------------------------------|
I did a little test and found out that after submitting the form to the 1st servlet, I cannot get a PortletRenderRequest object in that servlet.
I have read the available documentation about building portlets but I cannot get a clear picture as to how I am supposed to build a portlet that uses servlets, or if it is possible at all.
Is there a way to do this? Or if there isn't, can anyone provide an alternative?
Thank you in advance.
Best regards,
Aldo Herrera

If you mean the application AIM for Mac, it will depend on your download speed.
If you mean "Can I use iChat with an AIM a screen name and does it cost anything ?" then the answer is Yes you can and no it does not cost and there is no download to do.
If you mean "Can I use the AIM service with an @mac screen name and can this be done for free ? " then the answer is again yes.
A trail account cost nothing and will work in ichat after the 60 days is up
A Paid for but Lapsed account will also work in iChat and for this purpose can now be considered free.
As I said and hinted at before your first question does not make it clear what you are actually asking.
The Application AIM for Mac is stuck at version 4.7 and does not do Video or Audio Only chats.
It has things that are useful in tweaking Buddy Lists in iChat but it is not specifically needed to contact AIM Buddies.
9:00 PM Tuesday; June 24, 2008

HT204023 What are the costs to use a personal hotspot

Does anyone know the cost to use a personal hot spot.

Personal Hotspots are control by your carrier. My carrier is Verizon and with my plan there is no additional cost for a hotspot.

Producrt Cost by Sales Order with Valuated Stock

Hi Gurus,
My client is having Producrt Cost by Sales Order with Valuated Sales Order Stock. Can anybody reply me for my following issues.
1. while calculating Sales order cost estimate thru VA02 , the same Cost estimate is appearing against with EK02 condition type in Sales order Condotions. what is the use of Sales order Cost estimate? is there any impact on production?
2. What is Difference between Sales Order Cost Estimate and Order BOM Cost estimate?
3.when can we calculate Sales Order Cost estimate ? whether before Production or before billing ? can anybody tell me please..
4.while settling the production order also system picking the cost in VPRS not in EK02, i am not sure about this step.can any body correct if i am wrong
5.I know we can caluculate WIP in Sales order also. when can we calculate ? before settling the Production order or after production ?
thanks
Prasad

Hi,
there are 3 types of scenarios in MTO.
In Two scenarios Sale Order would be cost object - (Non-Valuated Sale orders stock and Valuated Sale Order stock with Sale order being Cost Object)
In third scenario (Valuated Sale Order Stock without Sale Order controlling), Only Production Order is the Cost Object.
In all the cases wherever the Sale Order is the cost object, Sale Order is the final Receiver. Only the difference is that in valuated sale order stock, stock entries would be passed to FI and in non-valuated sale order, no goods movement for FG will be there.
Please let me know if you need further details in this regard
Surya

Cost of Using WLAN with X6

Similar Messages

Maybe you are looking for