Cost Owned Transactions and Cost Derived Transactions

Hi,
Need to Know the details about Cost Owned Transactions and Cost Derived Transactions in 'Periodic Item Cost Change Report'.
Regards,
Abdul Wasi

Hi,
In status control the setting is status of plan and hence the derived transactions will always be generated in planned status and you have to fix them through TPM18.
In order to post it through TBB1 itself, the control setting should have same status option. But check with the business also whether this is not going to have any other effect because this is at the central company code and valuation area level. All derived transactions will have the same status of the operative transactions itself.
Regards,
Ravi

Similar Messages

About Container-managed Transactions and Bean-managed Transactions

as the document of weblogic7.0 describe the differents of Container-managed
          Transactions and Bean-managed Transactions,and in the document,It tell us
          details of using Bean-managed Transactions,such as \:
          import javax.naming.*;import javax.transaction.UserTransaction;.....
          import java.sql.*;import java.util.*;
          UserTransaction tx = (UserTransaction)
          ctx.lookup("javax.transaction.UserTransaction");tx.begin();
          tx.commit() //or tx.rollback
          but how to use Container-managed Transactions?
          what is EJB's deployment descriptor? can someone tell me?
          i wonder someone will show me an example of how to use Container-managed
          Transactions.
          thanks
          fish


Many if not all of the WLS EJB examples use container-managed
          transactions. That's a good place to start.
          I'd also recommend that you pick up a decent EJB book. There's several
          on the market right now.
          -- Rob
          fish wrote:
          > <ejb-jar>
          > <enterprise-beans>
          > <session>
          > <ejb-name>testbean</ejb-name>
          > <home>test.test.TestHome</home>
          > <remote>test.test.Test</remote>
          > <ejb-class>test.test.TestBean</ejb-class>
          > <session-type>Stateful</session-type>
          > <transaction-type>Container</transaction-type>
          > </session>
          > </enterprise-beans>
          >
          > <assembly-descriptor>
          > <container-transaction>
          > <method>
          > <ejb-name>EmployeeRecord</ejb-name>
          > <method-name>*</method-name>
          > </method>
          > <trans-attribute>Required</trans-attribute>
          > </container-transaction>
          > </assembly-descriptor>
          > </ejb-jar>
          > ----------------------------------------------
          > seems i have to write ejb-jar.xml like this,am i right?
          > what about <ejb-client-jar>? is it needed in this xml file?
          >
          > thanks
          >
          > fish
          >
          >

IW32 control data tab cost varaiant actaul and cost varaiant planned field

Hi Team,
In my preventive maintenance order , in control data tab cost varaiant actaul and cost varaiant planned field is not avialble it is hidden , but comming in PM01 order tye.
Tcode OIAN for preventive maint. order type
Cstg variant actual CAUFVD-KLVARI
Cstg variant planned CAUFVD-KLVARP
Input indicator is selected.
What may be the reason.
Thanks in advance.

Hello,
I already ran the report Z_FILL_COSTING_VARIANTS and after that I will go to calculate costs in the order but nothing. I this order I already had confirmations but when running the cost calculation the system doesn't made the calculation.
Can you help me?

Difference between cost component structure and cost component split

can anyone explain me the difference between cost component structure and cost component split with simple example
thanks
santosh

Hi ,
cost component structure
Definition
Number that identifies the structure.
Use
In Product Cost Controlling, the cost component structure determines how the results of material costing are updated. The cost component structure groups the costs for each material according to cost component (such as material costs, internal activities, external activities, and overhead). If the material is used in the production of another material, the cost component split (which breaks down the costs according to material costs, internal activities, external activities, overhead, and so forth) remains in the system when the costs are rolled up.
In the cost component split, you also define the following for material costing:
Which part of the costs are fixed costs
Which costs are
cost of goods manufactured and what are sales and administration costs
Which costs are relevant for stock valuation, commercial inventory valuation and tax inventory valuation
When the cost component structure is assigned to the organizational units, you can specify that two cost component splits are created:
Main cost component split
This is the principal cost component split, meaning that it is used in the standard cost estimate, which can be used to update the material master. The main cost component split can be a cost component split for cost of goods manufactured or a primary cost component split.
Auxiliary cost component split
This can exist in addition to the main cost component split, and is not used in the standard cost estimate. It can be used for analysis purposes, in that it can be displayed with the cost estimate and passed on to Profitability Analysis.
In Cost Center Accounting, the cost component structure determines how the results of the activity price calculation are updated. The cost component structure groups the costs for each activity type of the cost center according to components (such as material costs and labor costs). If an internal activity allocation is carried out, the cost component split (which breaks down the costs according to material, labor costs, and so forth) is retained at cost rollup.
If the cost component split is not to be retained, you can create a switching structure for the cost component structure for Cost Center Accounting. In the switching structure, you specify which sender cost component goes into which receiver cost component.
<b>require a cost component structure to calculate prices using cost component split.</b>
For each cost component structure you define a component such as energy, personnel, or raw materials. The components combine all costs occuring for a particular cost element area. In this way, you ensure greater cost transparency in activity price calculation when putting together the activity type prices - for example, it becomes easier to find how much of the activity price is taken up by the material costs.
In activity allocation, the cost component structure remains constant, meaning that the receiver takes on the sender cost elements and that the allocated costs are posted in the same cost components in the receiver as in the sender.
A cost component structure can have a maximum of 40 defined cost components.
Cost components are assigned to cost elements. You thereby determine which cost elements go to which rows in the structure, and how these components are updated in price calculation.
Hope ths helps
Please rewad points
Sunil

Book cost to WBS and Cost Center

Hello All,
TEST SYSTEM
I post cost to WBS ( 5150 real ) and cost center (1001 real). The wbs 5150 is assign to cost center 1001.
I do not have validation and subs.
The system allow me to book cost to both cost object (WBS/Cost Center)
How does the system recognize this.
To my knowledge even though you booked cost to both cost object the system will automatically make wbs as statiscal.
Is this correct ?
Please advise
Thanks
bali

Hi,
If your WBS is not defined as statistical in the master data, then booking to WBS and cost centre, will create statistical posting to cost centre and not to WBS.
Regards,
Eli

C0pying an ESS transaction and customizing ess transaction through PFCG

Hi all,
I need help in copying a ITS ess transaction into a z transaction.
Ex: I am trying to copy PZ03 into ZPZ03. I am not sure whether i can just copy transaction pz03 to zpzo3. Please help me in how to copy a ITS transaction into a new Z transaction and if i wanna do some core modifications how can i do that.
And i think i can hide some buttons...without copying ITS ESS transaction through PFCG. Please help me in this too.
Thanks,
Kranthi.

Hi Michael,
Does your problem still persist? Do you have new information regarding the problem?
If the problem is solved: Please mark this thread as answered. Thank you!
Best regards,
Henning.

Cost to Cost Assessment (KSU5) and Cost to Product Assessment (KEU5)

Hi Guys,
I need your expert advice!
When I check KSB1 per cost center, I noticed that I have some unallocated cost for the past three months. This is due to some late entries that I didnt notice and the fact that I already ran the assessment earlier. Please advice how can I allocate the unallocated cost for the past 3 months? Is there such thing as a Year To Date (YTD) Assessement?.
I'll appreciate your advice.
Best Regards,
Nel

Hi,
You can try to run your assessment again (it will reverse the results of the previous run and post a new one). Check before doing this, if your cycle is taking all costs or it could be limited by G/L accounts.
Regards,
Eli

Asset and cost centre

hi,how can i create my own asset and cost centres?

Hi Lakshmi,
Use BAPI_FIXEDASSET_CREATE to create assets and BAPI_COSTCENTER_CREATEMULTIPLE to create cost centers.
Regds,
Younus
<b>Reward Helpful Answers!!!</b>

Two phase commit and bean managed transactions

To all the Transaction GURUS!
          Hi guys (-and gals).
          I've been doing J2EE for quite a while, but today was my first at
          XA-Transactions and Bean Managed Transactions.
          Why am I doing this?
          ====================
          Well I have to be able to controll the transactionalbehaviour of my
          bean
          during runtime, since some bean calls would cause a transactional
          overflow due to the stress they would cause to the system, whereas
          smaller bean calls need to run in one transaction.
          -> Therefore I need Bean Managed Transactions
          Since the bean does a call on two Database Connections it has to use a
          XA-Transaction.
          -> Therefore I need XA-Transactions.
          Abstract
          ========
          - I just can't get a User TransAction into the right Status it stays
          in 'STATUS_NO_TRANSACTION' all the time
          - Therefore the SQL Commands can be comitted 'java.sql.SQLException:
          Does not support SQL execution with no global transaction'
          - Therefore I can't do a rollback 'java.lang.IllegalStateException:
          Transaction does not exist'
          - Therefore I wrote this mail.
          I don't want to be a smart-"ass" writing such a detailed and indepth
          mail. I just would like to show that I tried, and would like to have
          some replies from you guys.
          Below are my configurations, code and logfiles.
          Thanx for taking your time and hope that the other people may learn
          something as well.
          cu
          Stefan
          Scenario
          ========
          used Software
          Bea Weblogic (WL) 6.0 SPx (not real sure which SP i have)
          Oracle 8.1.6 using the API-Version 8
          I configured the system as follows:
          (ofcourse I 'xxx'ed out all of the confidential data, sorry guys;-))
          excerpt from:
          config.xml
          <JDBCConnectionPool CapacityIncrement="5"
          DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="2"
          LoginDelaySeconds="1" MaxCapacity="5" Name="oraclePool"
          Properties="user=xxx;password=xxx;dll=ocijdbc8;protocol=thin"
          RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
          TestTableName="languages" URL="jdbc:oracle:thin:@xxx:1521:xxx "/>
          
          <JDBCTxDataSource EnableTwoPhaseCommit="true"
          JNDIName="finstral.datasource.fbs" Name="finstral Content Datasource"
          PoolName="oraclePool" Targets="fbsserver"/>
          
          <JDBCConnectionPool CapacityIncrement="5"
          DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
          LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
          Properties="user=xxx;password=xxx;server=xxx.xxx.xxx"
          RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
          TestTableName="Users" SupportsLocalTransaction="true"/>
          
          <JDBCTxDataSource EnableTwoPhaseCommit="true"
          JNDIName="finstral.datasource.fbssecurity" Name="finstral Security
          Datasource" PoolName="oracleSecurityPool" Targets="fbsserver"/>
          
          ejb-jar.xml
          <ejb-jar>
               <enterprise-beans>
                    <session>
                         <ejb-name>TPCTestBean</ejb-name>
          <home>de.sitewaerts.futuna.common.test.tpcbean.TPCHome</home>
          <remote>de.sitewaerts.futuna.common.test.tpcbean.TPC</remote>
          <ejb-class>de.sitewaerts.futuna.common.test.tpcbean.TPCBean</ejb-class>
                         <session-type>Stateless</session-type>
                         <transaction-type>Bean</transaction-type>
                    </session>
               </enterprise-beans>
               <assembly-descriptor/>
          </ejb-jar>
          
          weblogic-ejb-jar.xml
          <weblogic-ejb-jar>
               <weblogic-enterprise-bean>
                    <ejb-name>TPCTestBean</ejb-name>
                    <stateless-session-descriptor/>
                    <jndi-name>finstral/ejb/test_tpc</jndi-name>
               </weblogic-enterprise-bean>
          </weblogic-ejb-jar>
          
          BeanCode (from the implementingBeanClass:
          'de.sitewaerts.futuna.common.test.tpcbean.TPCBean')
          public void setupTables() throws RemoteException
          UserTransaction tx = getTransaction();
          //getTransaction calls: 'tx = sCtx.getUserTransaction()' and does
          some errorhandling
          log.info("Die Transaktion vor den Connections: "+tx.toString());
          //Sorry bout the German. You should get the Message though.
          log.info("Der Transaktionsstatus vor den Connections:
          "+transactionStatus(tx));
          Connection conSecurity = getConnection(DATASOURCE_SECURITY, tx);
          //gets a Connection via a DataSourceName from the JNDI tree
          Connection conContent = getConnection(DATASOURCE_CONTENT, tx);
          log.info("Die frische Connection conSecurity: "+conSecurity);
          log.info("Die frische Connection conContent: "+conContent);
          tearDownTable(conSecurity);
          //Does nothing special
          tearDownTable(conContent);
          log.info("Die Transaktion nach dem Teardown: "+tx.toString());
          log.info("Der Transaktionsstatus nach dem Teardown:
          "+transactionStatus(tx));
          Statement stmt = null;
          try
          stmt = conSecurity.createStatement();
          //Well its getting interesting now.....
          log.info("Die Transaktion vor dem createtable: "+tx.toString());
          log.info("Der Transaktionsstatus vor dem createtable:
          "+transactionStatus(tx));
          log.info("Die Connection conSecurity vor dem createtable:
          "+conSecurity);
          log.info("Die Connection conContent vor dem createtable:
          "+conContent);
          stmt.executeUpdate(CREATE_TABLE);
          //above is the row 91 -> throws: 'java.sql.SQLException: Does
          not support SQL execution with no global transaction'
          stmt.close();
          stmt = conContent.createStatement();
          stmt.executeUpdate(CREATE_TABLE);
          stmt.close();
          commitTransaction(tx);
          catch (SQLException sqle)
          log.error("Konnte kein table init machen", sqle);
          rollbackTransaction(tx);
          //The Code for this method is below
          throw new EJBException(sqle);
          finally
          closeConnection(conSecurity);
          closeConnection(conContent);
          protected void rollbackTransaction(UserTransaction tx)
          log.info("Der Transaktionsstatus vor dem Rollback:
          "+transactionStatus(tx));
          log.info("Die Transaktion vor dem Rollback: "+tx.toString());
          try
          tx.rollback();
          //above is row 200 -> throws: 'java.lang.IllegalStateException:
          Transaction does not exist'
          log.info("Der Transaktionsstatus nach dem Rollback:
          "+transactionStatus(tx));
          log.info("Die Transaktion nach dem Rollback: "+tx.toString());
          catch (Exception e)
          log.error("Konnte die Transaktion nicht backrollen.", e);
          throw new EJBException(e);
          Log Excerpt
          ===========
          INFO setupTables() (66) - Die Transaktion vor den Connections:
          [email protected]
          INFO setupTables() (67) - Der Transaktionsstatus vor den Connections:
          STATUS_NO_TRANSACTION
          INFO setupTables() (72) - Die frische Connection conSecurity:
          weblogic.jdbc.rmi.SerialConnection@7c6daa
          INFO setupTables() (73) - Die frische Connection conContent:
          weblogic.jdbc.rmi.SerialConnection@3b425
          INFO setupTables() (78) - Die Transaktion nach dem Teardown:
          [email protected]
          INFO setupTables() (79) - Der Transaktionsstatus nach dem Teardown:
          STATUS_NO_TRANSACTION
          INFO setupTables() (86) - Die Transaktion vor dem createtable:
          [email protected]
          INFO setupTables() (87) - Der Transaktionsstatus vor dem createtable:
          STATUS_NO_TRANSACTION
          INFO setupTables() (88) - Die Connection conSecurity vor dem
          createtable: weblogic.jdbc.rmi.SerialConnection@7c6daa
          INFO setupTables() (89) - Die Connection conContent vor dem
          createtable: weblogic.jdbc.rmi.SerialConnection@3b425
          ERROR setupTables() (101) - Konnte kein table init machen
          java.sql.SQLException: Does not support SQL execution with no global
          transaction
               at
          weblogic.jdbc.oci.xa.XAConnection.beforeExecute(XAConnection.java:137)
               at
          weblogic.jdbc.oci.xa.Statement.executeUpdate(Statement.java:112)
               at weblogic.jdbc.jta.Statement.executeUpdate(Statement.java:185)
               at
          weblogic.jdbc.rmi.internal.StatementImpl.executeUpdate(StatementImpl.jav
          a:42)
               at
          weblogic.jdbc.rmi.SerialStatement.executeUpdate(SerialStatement.java:54)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.jav
          a:91)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBean
          Impl.java:130)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCBe
          anEOImpl.java:64)
               at
          de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseCo
          mmitUnitTest.java:51)
               at
          org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTes
          tCase.java:297)
               at
          org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servle
          tTestCaller.java:148)
               at
          org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCal
          ler.java:199)
               at
          org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTes
          tRedirector.java:149)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
          java:213)
               at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
          etContext.java:1265)
               at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
          java:1631)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          INFO rollbackTransaction() (196) - Der Transaktionsstatus vor dem
          Rollback: STATUS_NO_TRANSACTION
          INFO rollbackTransaction() (197) - Die Transaktion vor dem Rollback:
          [email protected]
          ERROR rollbackTransaction() (206) - Konnte die Transaktion nicht
          backrollen.
          java.lang.IllegalStateException: Transaction does not exist
               at
          weblogic.transaction.internal.TransactionManagerImpl.rollback(Transactio
          nManagerImpl.java:228)
               at
          weblogic.transaction.internal.TransactionManagerImpl.rollback(Transactio
          nManagerImpl.java:222)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBean.rollbackTransaction(TPC
          Bean.java:200)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.jav
          a:102)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBean
          Impl.java:130)
               at
          de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCBe
          anEOImpl.java:64)
               at
          de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseCo
          mmitUnitTest.java:51)
               at
          org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTes
          tCase.java:297)
               at
          org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servle
          tTestCaller.java:148)
               at
          org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCal
          ler.java:199)
               at
          org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTes
          tRedirector.java:149)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
          java:213)
               at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
          etContext.java:1265)
               at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
          java:1631)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          CONCLUSION
          ==========
          I'm going nuts.
          I just don't get it.
          The transaction is the same. I don't change the Connection. I start
          the Transaction at the beginning before I do anything!
          Please guys help me out.
          Thx alot.
          Stefan "it's three o'clock in the morning, my girlfriend left me, and
          my only friend is that stupid linux pinguine" Siprell
          Software-Development
          <<<<<<<<<<<<<<<<<<<<<<<<<<<
          <sitewaerts> GmbH
          Hebelstraße 15
          D-76131 Karlsruhe
          Tel: +49 (721) 920 918 22
          Fax: +49 (721) 920 918 29
          http://www.sitewaerts.de
          >>>>>>>>>>>>>>>>>>>>>>>>>>>


Hi Priscilla
          (did you ever see the movie ? :-))
          Well I moved away from the idea of using bean managed transaction. I'll
          be using Container Managed Transactions. To modify the
          transactionalbehaviour I'll write proxymethods which have certain
          different containermanaged transaction properties, but which all call
          the same private methods.
          But it works! Here is my experience:
          - I was doing a DDL statement: I was trying to create new Tables, which
          is a definite "no-go"
          - pay careful attention to:
          http://edocs.bea.com/wls/docs60/jta/trxejb.html#1051405
                    and
          http://edocs.bea.com/wls/docs60/jta/trxejb.html#1051741
          and use these Settings for the Pool, don't ask me why, but it took me
          hours to find it out by myself:
               <JDBCConnectionPool CapacityIncrement="5"
          DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
          LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
          Properties="user=xxx; password=xxx; server=xxx.xxx.xxx"
          RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
          TestTableName="Users" SupportsLocalTransaction="true"/>
          where as the server (shown as: xxx.xxx.xxx) is the TNS Name of the
          Oracle Driver.
          It works great.
          Another thing you guys might want to do is write a simple StatelessSB
          which does JDBC calls and two different database Connections.
          Then write a UnitTest which calls this bean a couple hundred times (with
          the same transaction). Have one test do clean writes, and another which
          causes some SQL-Exception (too long Data Columns, or likewise).
          Always count the entries and see if everything worked out. We're using
          this SetupConstruction to test new combinations of AS(sorry Priscilla) /
          Database / Db-Drivers to have a "standard test".
          I know my two cents were uncalled for, but it might save you some
          time.....
          thanx for your help
          Stefan
          -----Ursprüngliche Nachricht-----
          Von: Priscilla Fung [mailto:[email protected]]
          Bereitgestellt: Donnerstag, 2. August 2001 21:42
          Bereitgestellt in: transaction
          Unterhaltung: Two phase commit and bean managed transactions
          Betreff: Re: Two phase commit and bean managed transactions
          Hi Stefan,
          Looks like you have not actually begun a transaction by calling
          UserTransaction.begin(),
          so your setupTables method is really executing with no transaction
          context.
          Priscilla
          Stefan Siprell <[email protected]> wrote:
          >To all the Transaction GURUS!
          >
          >Hi guys (-and gals).
          >I've been doing J2EE for quite a while, but today was my first at
          >XA-Transactions and Bean Managed Transactions.
          >
          >Why am I doing this?
          >====================
          >Well I have to be able to controll the transactionalbehaviour of my
          >bean
          >during runtime, since some bean calls would cause a transactional
          >overflow due to the stress they would cause to the system, whereas
          >smaller bean calls need to run in one transaction.
          >-> Therefore I need Bean Managed Transactions
          >Since the bean does a call on two Database Connections it has to use
          >a
          >XA-Transaction.
          >-> Therefore I need XA-Transactions.
          >
          >Abstract
          >========
          >- I just can't get a User TransAction into the right Status it stays
          >in 'STATUS_NO_TRANSACTION' all the time
          >- Therefore the SQL Commands can be comitted 'java.sql.SQLException:
          >Does not support SQL execution with no global transaction'
          >- Therefore I can't do a rollback 'java.lang.IllegalStateException:
          >Transaction does not exist'
          >- Therefore I wrote this mail.
          >
          >I don't want to be a smart-"ass" writing such a detailed and indepth
          >mail. I just would like to show that I tried, and would like to have
          >some replies from you guys.
          >
          >Below are my configurations, code and logfiles.
          >
          >Thanx for taking your time and hope that the other people may learn
          >something as well.
          >
          >cu
          >
          >Stefan
          >
          >
          >Scenario
          >========
          >
          >used Software
          >-------------
          >Bea Weblogic (WL) 6.0 SPx (not real sure which SP i have)
          >Oracle 8.1.6 using the API-Version 8
          >
          >
          >I configured the system as follows:
          >(ofcourse I 'xxx'ed out all of the confidential data, sorry guys;-))
          >excerpt from:
          >
          >config.xml
          >----------
          ><JDBCConnectionPool CapacityIncrement="5"
          >DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="2"
          >LoginDelaySeconds="1" MaxCapacity="5" Name="oraclePool"
          >Properties="user=xxx;password=xxx;dll=ocijdbc8;protocol=thin"
          >RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
          >TestTableName="languages" URL="jdbc:oracle:thin:@xxx:1521:xxx "/>
          >
          >
          >
          ><JDBCTxDataSource EnableTwoPhaseCommit="true"
          >JNDIName="finstral.datasource.fbs" Name="finstral Content Datasource"
          >PoolName="oraclePool" Targets="fbsserver"/>
          >
          >
          >
          ><JDBCConnectionPool CapacityIncrement="5"
          >DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
          >LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
          >Properties="user=xxx;password=xxx;server=xxx.xxx.xxx"
          >RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
          >TestTableName="Users" SupportsLocalTransaction="true"/>
          >
          >
          >
          ><JDBCTxDataSource EnableTwoPhaseCommit="true"
          >JNDIName="finstral.datasource.fbssecurity" Name="finstral Security
          >Datasource" PoolName="oracleSecurityPool" Targets="fbsserver"/>
          >
          >
          >
          >
          >
          >ejb-jar.xml
          >-----------
          ><ejb-jar>
          >     <enterprise-beans>
          >          <session>
          >               <ejb-name>TPCTestBean</ejb-name>
          >
          ><home>de.sitewaerts.futuna.common.test.tpcbean.TPCHome</home>
          >
          ><remote>de.sitewaerts.futuna.common.test.tpcbean.TPC</remote>
          >
          ><ejb-class>de.sitewaerts.futuna.common.test.tpcbean.TPCBean</ejb-class>
          >               <session-type>Stateless</session-type>
          >               <transaction-type>Bean</transaction-type>
          >          </session>
          >     </enterprise-beans>
          >     <assembly-descriptor/>
          ></ejb-jar>
          >
          >
          >
          >weblogic-ejb-jar.xml
          >--------------------
          ><weblogic-ejb-jar>
          >     <weblogic-enterprise-bean>
          >          <ejb-name>TPCTestBean</ejb-name>
          >          <stateless-session-descriptor/>
          >          <jndi-name>finstral/ejb/test_tpc</jndi-name>
          >     </weblogic-enterprise-bean>
          ></weblogic-ejb-jar>
          >
          >
          >
          >BeanCode (from the implementingBeanClass:
          >'de.sitewaerts.futuna.common.test.tpcbean.TPCBean')
          >-----------------------------------------------------------------------
          >---------------------
          >
          > public void setupTables() throws RemoteException
          > {
          > UserTransaction tx = getTransaction();
          > //getTransaction calls: 'tx = sCtx.getUserTransaction()' and does
          >some errorhandling
          >
          > log.info("Die Transaktion vor den Connections: "+tx.toString());
          > //Sorry bout the German. You should get the Message though.
          > log.info("Der Transaktionsstatus vor den Connections:
          >"+transactionStatus(tx));
          >
          > Connection conSecurity = getConnection(DATASOURCE_SECURITY, tx);
          > //gets a Connection via a DataSourceName from the JNDI tree
          > Connection conContent = getConnection(DATASOURCE_CONTENT, tx);
          >
          > log.info("Die frische Connection conSecurity: "+conSecurity);
          > log.info("Die frische Connection conContent: "+conContent);
          >
          > tearDownTable(conSecurity);
          > //Does nothing special
          > tearDownTable(conContent);
          >
          > log.info("Die Transaktion nach dem Teardown: "+tx.toString());
          > log.info("Der Transaktionsstatus nach dem Teardown:
          >"+transactionStatus(tx));
          >
          > Statement stmt = null;
          > try
          > {
          > stmt = conSecurity.createStatement();
          > //Well its getting interesting now.....
          >
          > log.info("Die Transaktion vor dem createtable: "+tx.toString());
          > log.info("Der Transaktionsstatus vor dem createtable:
          >"+transactionStatus(tx));
          > log.info("Die Connection conSecurity vor dem createtable:
          >"+conSecurity);
          > log.info("Die Connection conContent vor dem createtable:
          >"+conContent);
          >
          > stmt.executeUpdate(CREATE_TABLE);
          > //above is the row 91 -> throws: 'java.sql.SQLException: Does
          >not support SQL execution with no global transaction'
          >
          > stmt.close();
          >
          > stmt = conContent.createStatement();
          > stmt.executeUpdate(CREATE_TABLE);
          > stmt.close();
          > commitTransaction(tx);
          > }
          > catch (SQLException sqle)
          > {
          > log.error("Konnte kein table init machen", sqle);
          > rollbackTransaction(tx);
          > //The Code for this method is below
          > throw new EJBException(sqle);
          > }
          > finally
          > {
          > closeConnection(conSecurity);
          > closeConnection(conContent);
          > }
          > }
          >
          > protected void rollbackTransaction(UserTransaction tx)
          > {
          > log.info("Der Transaktionsstatus vor dem Rollback:
          >"+transactionStatus(tx));
          > log.info("Die Transaktion vor dem Rollback: "+tx.toString());
          > try
          > {
          > tx.rollback();
          > //above is row 200 -> throws: 'java.lang.IllegalStateException:
          >Transaction does not exist'
          > log.info("Der Transaktionsstatus nach dem Rollback:
          >"+transactionStatus(tx));
          > log.info("Die Transaktion nach dem Rollback: "+tx.toString());
          > }
          > catch (Exception e)
          > {
          > log.error("Konnte die Transaktion nicht backrollen.", e);
          > throw new EJBException(e);
          > }
          > }
          >
          >Log Excerpt
          >===========
          >INFO setupTables() (66) - Die Transaktion vor den Connections:
          >[email protected]
          >INFO setupTables() (67) - Der Transaktionsstatus vor den Connections:
          >STATUS_NO_TRANSACTION
          >INFO setupTables() (72) - Die frische Connection conSecurity:
          >weblogic.jdbc.rmi.SerialConnection@7c6daa
          >INFO setupTables() (73) - Die frische Connection conContent:
          >weblogic.jdbc.rmi.SerialConnection@3b425
          >INFO setupTables() (78) - Die Transaktion nach dem Teardown:
          >[email protected]
          >INFO setupTables() (79) - Der Transaktionsstatus nach dem Teardown:
          >STATUS_NO_TRANSACTION
          >INFO setupTables() (86) - Die Transaktion vor dem createtable:
          >[email protected]
          >INFO setupTables() (87) - Der Transaktionsstatus vor dem createtable:
          >STATUS_NO_TRANSACTION
          >INFO setupTables() (88) - Die Connection conSecurity vor dem
          >createtable: weblogic.jdbc.rmi.SerialConnection@7c6daa
          >INFO setupTables() (89) - Die Connection conContent vor dem
          >createtable: weblogic.jdbc.rmi.SerialConnection@3b425
          >ERROR setupTables() (101) - Konnte kein table init machen
          >java.sql.SQLException: Does not support SQL execution with no global
          >transaction
          >     at
          >weblogic.jdbc.oci.xa.XAConnection.beforeExecute(XAConnection.java:137)
          >     at
          >weblogic.jdbc.oci.xa.Statement.executeUpdate(Statement.java:112)
          >     at weblogic.jdbc.jta.Statement.executeUpdate(Statement.java:185)
          >     at
          >weblogic.jdbc.rmi.internal.StatementImpl.executeUpdate(StatementImpl.ja
          v
          >a:42)
          >     at
          >weblogic.jdbc.rmi.SerialStatement.executeUpdate(SerialStatement.java:54
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.ja
          v
          >a:91)
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBea
          n
          >Impl.java:130)
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCB
          e
          >anEOImpl.java:64)
          >     at
          >de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseC
          o
          >mmitUnitTest.java:51)
          >     at
          >org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTe
          s
          >tCase.java:297)
          >     at
          >org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servl
          e
          >tTestCaller.java:148)
          >     at
          >org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCa
          l
          >ler.java:199)
          >     at
          >org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTe
          s
          >tRedirector.java:149)
          >     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          >     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          >     at
          >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl
          >java:213)
          >     at
          >weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServ
          l
          >etContext.java:1265)
          >     at
          >weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl
          >java:1631)
          >     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          >     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >INFO rollbackTransaction() (196) - Der Transaktionsstatus vor dem
          >Rollback: STATUS_NO_TRANSACTION
          >INFO rollbackTransaction() (197) - Die Transaktion vor dem Rollback:
          >[email protected]
          >ERROR rollbackTransaction() (206) - Konnte die Transaktion nicht
          >backrollen.
          >java.lang.IllegalStateException: Transaction does not exist
          >     at
          >weblogic.transaction.internal.TransactionManagerImpl.rollback(Transacti
          o
          >nManagerImpl.java:228)
          >     at
          >weblogic.transaction.internal.TransactionManagerImpl.rollback(Transacti
          o
          >nManagerImpl.java:222)
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBean.rollbackTransaction(TP
          C
          >Bean.java:200)
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.ja
          v
          >a:102)
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBea
          n
          >Impl.java:130)
          >     at
          >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCB
          e
          >anEOImpl.java:64)
          >     at
          >de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseC
          o
          >mmitUnitTest.java:51)
          >     at
          >org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTe
          s
          >tCase.java:297)
          >     at
          >org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servl
          e
          >tTestCaller.java:148)
          >     at
          >org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCa
          l
          >ler.java:199)
          >     at
          >org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTe
          s
          >tRedirector.java:149)
          >     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          >     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          >     at
          >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl
          >java:213)
          >     at
          >weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServ
          l
          >etContext.java:1265)
          >     at
          >weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl
          >java:1631)
          >     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          >     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >
          >
          >CONCLUSION
          >==========
          >I'm going nuts.
          >I just don't get it.
          >The transaction is the same. I don't change the Connection. I start
          >the Transaction at the beginning before I do anything!
          >Please guys help me out.
          >Thx alot.
          >
          >Stefan "it's three o'clock in the morning, my girlfriend left me, and
          >my only friend is that stupid linux pinguine" Siprell
          >Software-Development
          ><<<<<<<<<<<<<<<<<<<<<<<<<<<
          ><sitewaerts> GmbH
          >Hebelstraße 15
          >D-76131 Karlsruhe
          >
          >Tel: +49 (721) 920 918 22
          >Fax: +49 (721) 920 918 29
          >http://www.sitewaerts.de
          >>>>>>>>>>>>>>>>>>>>>>>>>>>>
          >
          >
          >

Problem with use of COM+ Transaction and DB Transaction

Problem with use of COM+ Transaction and DB Transaction
We build a Web site that use sometime COM+ Transaction and sometime DB
Transaction. If we use a COM+ Transaction and a few seconds later we try to use
a Database Transaction (OracleConnection.BeginTransaction), we get the error
Connection is already part of a local or a distributed transaction
Of course the error does not produce everytime; it takes some try before we get
the problem. And of course, if i use pooling=false on the connection string,
the problem does not appear.
i run the Web page
and push the COM+ Transaction and DB Transaction one after the other for some
times and the problem should appear.
Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
Database Server 9.2.0.4

> Why in form builder can't I...
Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
Regards,
Robin Zimmermann
Forms Product Management

Cost centre and cost element related tables

Hi,
Could any help me in knowing whre the cost centre goup and cost element groups are maintained.
Could you help in proving the link tables between Cost centre, Cost centre Group, Cost element and Cost element group.
Regards,
Krishna

Hi,
Please refer to Table SETLEAF for cost element group and cost center group. This table is based on set class and 0101 is for Cost Center Group and 0102 is for Cost Element Group.
Cost Center Master data table is CSKS and Cost element Master data table is CSKB. To the bse of my knowledge you cannot directly join these two tables with SETLEAF table as key figure fields are not common. In case you are getting any ABAP report developed, you can ask the developer to write a code saying Controlling Area is equal to Organizational Unit as Set Subclass.
Hope this helps.
Regards,
Harish

SoD Analysis , tables to relate roles, transactions and auth objects

Hi everyone,
I am analyzing my company SAP roles in terms of segregation of duties, however I having a problem.
I need a table/report to give me for each role, every transactions and for each transaction in the role every authorization objects.
For example I want to know for Role B that have transaction C which have the follow authorization object D with values X and Y.
Therefore I want to know for each role and respective transactions which are only display or/and execute or/and editable. How can I do that?
Thanks!

Hi,
There is no default report/table which gives you the required information. However, you can achieve this by using SQVI. Join the tables, and create a tcode for the same. Refer the below link:
Re: SAP Query in SQVI transaction
Alternatively, you can download all the data into spreadsheet and create Pivots to plot the information.
The other alternative is to have a custom program built which takes the information from AGR_DEFINE, AGR_AGRS, AGR_1251, AGR_1252, AGR_TCODE tables.
Hope this helps!!
Regards,
Raghu

Difference between enjoy and non-enjoy transaction

hi
can anybody tell me the difference between enjoy transaction and non-enjoy transactions
for example ME21N is enjoy transaction and ME21 isnt
we can do a BDC for ME21 and not for ME21N
basically, is it all transactions finishing with 'N' is enjoy transaction?

Hi sia,
1 can anybody tell me the difference between enjoy transaction and non-enjoy transactions
The main difference, bcos we cannot do bdc is :
a) The enjoy transactions are based on
   GUI Control (eg. Grid control based on class)
   which are instantiated/created
   on the front-end machine.
Hence, they cannot be accessed directly by code,
running on the application server.
(instead their value is set on the front-end)
Hence, we cannot do bdc on them.
regards,
amit m.

Updation of purchase info record during cost is released / additive costs

Hi Gurus,
Is there any enhancement available to to update the purchase info record with thecondition type
fild during release of materials using CK40N /CK24.
ie Whenever a cost is released , the object should populate the overhead condition type (ZUB1) on the INFO record
Another requirement is
Whenever there is adding/updating additive costs (ck74n and ck75n), the object should populate the corresponding condition types on the INFO records (ZFR2 for freight cost; ZOC2 for duty cost).
If you have any suggestions kindly replay.
Thank you very much.
Regards,
Jayaram.

Hi,
But my next question is how can I know how much cost centers will be for some document? If I need to define number of cost centers in advance, then this solution is not very flexible. The best solution would be if I could add values to classification flexibly (for example: one time 3 values and the other time 1 value).
:-Check box additional values in values tab of char. that will allow to enter flexible number of values any time
The other question is about values of parameters. For each cost center I need to enter two values (cost center number, and costs for that cost center). So, for each cost center I need to add 2 values. Is that possible using classification?
:-Create classification with chara. cost center, cost center value and check box additional values as above that will allow you to add values for cost center and cost center value.
Anirudh.

Can we use two costing variants for standards cost estimate release.

Hi,
We have 2 plants (plant 5100 and plant 5200) under company code 5000.
We have run standard cost estimate(CK11N) for material 98001000027 at plant 5100 using costing variant ZG01 and at plant 5200 using costing variant ZG02. First, we released standard cost estimate (CK24) for this materia at plant 5100 and set (in marking allowance) costing variant ZG01 and costing version 01. Next time when we are trying to release the standard cost estimate for the same material for plant 5200, it is automatically picking ZG01 as costing variant in marking allowance and it is not allowing to change the costing variant to ZG02 saying Company code 5000: Release already carried out, cancellation not possible, Message no. CK797.
Is it possible to use two different costing variants for release of standard cost estimate for a material at two different plants at the same company code? If so how?
Please suggest.
Thanks,
Bijay

Hi,
Thanks for your reply again.
What is the benefit of assigning "Single Valuation Variant same to different Plants" ? In costing variant also we can assign maximum only one valuation variant and this valuation variant will default for all the plants, and hence I dont think it is necessary to assign same valuation variant to different plants.
My issue is :
Example: ( Standard Cost Estimate for material 98001000027)
Plant - 1
Material Cost                                             Rs.100
Labour Cost                                               Rs.50
Overheads (10% of Labour Cost)                  Rs.5
(say ,through costing sheet - 1)
Total Standard Cost Estimate                      Rs.155
Plant - 2
Material Cost                                             Rs.150
Labour Cost                                               Rs.100
Overheads (20% of Labour Cost)                  Rs.20
(say, through costing sheet - 2)
Total Standard Cost Estimate                      Rs.270
Now, Please explain why we cannot have two Standard Cost Estimates for a material at two different plants? If it is possible to have two standard cost estimates for a material at two different plants, how to take care of overheads (rate of which varies) at two different plants (plant - 1 > 10% and plant- 2>20%) as we can assign maximum one costing sheet to a valuation variant variant?
How to map the system so as to meet the above requirement?
Thanks,
Bijay

Cost Owned Transactions and Cost Derived Transactions

Similar Messages

Maybe you are looking for