Cost Planning for networks in a CO plan version other than 0
Hi,
We have a specific requirement of getting the planned cost in terms of $ and hours on a network activity getting posted to some other CO version other than 0 in certain cases.
It would be great if anyone could suggest a FM or a BAPI to achieve this end?
Please reply if you need any clarification on the requirement
Regards,
Jibat
In Cj30 you will get the CO version '000 , If you want to your can copy cost planning values of your version V01 & V02 to
Version 0 and do the budgeting Because you actual will happen to 0 only so, to compare your plan should be there idealy.
Apart from that network cost planning can only be done in 0 version. And system give you option of copying the your preliminary plannning to version 0.
Virendra - Thanks for the explanation. It made my understanding better as well.
With Regards
Nitin P.
Edited by: Nitin Patoliya on Dec 3, 2009 12:50 PM
Similar Messages
-
What are possible causes for frequent loss of wireless mouse connectivity other than the batteries ?
Wi-Fi or another interference source. Try turning off the Wi-Fi and see if the problems continue. If that solves the problem, see if you can set your Wi-Fi to run in the 5 GHz range.
Keyboard/Mouse – Troubleshooting Wireless
WIFI AND BLUETOOTH FINALLY SOLVED, NO REALLY - YOSEMITE 10.10
Bluetooth Wireless Problems
Bluetooth devices become unresponsive -
Trying to download adobe flash. At step three, an "offer" to purchase some bundle-up program for $9.99/month appears. No other option except to hit "Purchase Now" button. Anyone know how to get around this?
Are you trying to get Flash Player or Adobe Flash, which is part of the Adobe CS Suite? If it is just Adobe Flash Player you want, go here.
http://get.adobe.com/flashplayer/otherversions/
Pete -
Best Compressor settings for HD720 16:9 to cell phone OTHER than iPhone?
Hey there,
Does anyone know a good set of compressor settings for exporting HD720 16:9 29.97fps to a cell phone compatible format other than iPhone? Do most cell phones use an MPEG format? I guess I should start there. New to this one.
Thank you,
edThere are different MPEG flavours and compression for DVD, mobiles or web often means creating some flavour of MPEG file. Even H.264 is an MPEG file. One of the most advanced.
Go to Compressor settings and look for a folder named Mobile devices then do a bit of your DIY (test, test, test).
G. -
Hi all,
I am trying to open a document created in Excel in Windows on my Excel 2011 for mac copy. The issue seems to be related to using the Macros and VB associated with the .xlsm doc. The specific error I get in Excel is:
Compile error in hidden module: Utilities
When I try to open it in an Excel web app, or other online excel environment (whether using Firefox or Chrome) I get this message:
We can't show these features in the browser:
VBA Project
Shapes or other objects
few other forums suggested an issue with adobe add-ins, but I don't show one in the Excel>Tools>Addins dialogue.
Any help is greatly appreciated, thanks!The same error message will result from a problem in any add-ins ,thus you should investigate other installed add-ins. It is worth the effort to try to start your excel program in safe mode. About how to use safe mode in Mac OS, Please refer to :http://support.microsoft.com/kb/892428
If this issue is gone in this situation, try to disable add-ins in excel.
In addition, since this issue is related to Excel 2011 for Mac, I would suggest that you post your issue in the following forum:http://answers.microsoft.com/en-us/mac -
Is there a SIM lock for iPad 3G? Can we use other than AT
Can we use other data SIM to operate iPad 2 bought in US?
yes the ipad2 verison model is cdma which is a different tech then gsm and don't use sims
and is not widely supported around the world
so get the att model -
EASY COST PLANNING at Network Activity Level
Hi All
I am using EHP4 system. I want to do easy cost planning at NWA level for this I already activate ECP for NWA in configuration setting and other necessary settings but still when I create ECP from CJ20N or CJ9ECP I can not able to do ECP on NWA activity level. Please give your inputs on same.
RegardsHi Gokul
All basic settings for ECP have been maintain. It allow me for ECP on WBS level but it not show me any activity or Network in ECP as I activate Planning for Network Activities with Easy Cost Plan in configuration.
Regards -
Easy Cost Planning at Network Level
Hi All,
I was able to implement ECP at WBS level, but not able to implement at network level. I am using SAP ECC 6.0 EHP 4.
I have activated the business function ops_ps_ci_1 and also activated the 'Activate Planning for Network Activities with Easy Cost Planning' in the configuration settings in SPRO-IMG. I had gone through most of the threads on this topic like :
Network Activity Easy Cost planning
ECP at activity level not triggered
I am not able to find the option for 'Create Alternate CO Version' and 'Activate Multiple CO Version' under the Easy Cost Planning and Execution Services in SPRO-IMG.Please advise me in implementing Easy Cost Planning at Network Level and correct me if I was wrong in completing the configuration steps.Thanku All,
I have done all the steps as you mentioned
1. Activated the business function OPS_PS_CI_1.
3
2.
3.
Activated Multiple Plan Version using the tcode RCNPRECP
Still not able to view the options under SPRO-IMG Easy Cost Planning
* Create Alternate CO Version
* Activate Multiple CO Version
Also not able to implement ECP at network level. -
AppleCare Protection Plan for iPhone
The Protection Plan costs $69.00 for a second year of coverage and I do not know if I should buy it. I have heard that the battery in the iPhone needs to be replaced yearly, is this true? I have heard that to replace a battery, it will cost around $85 and if this is true, isn't it better to get the AppleCare package for $69?
ThanksAnsuz82,
The iPhone batteries page says designed to retain 80% at this link in the right hand side bar:
http://www.apple.com/batteries/iphone.html
The quote from that page is:
A properly maintained iPhone battery is designed to retain up to 80% of its original capacity at 400 full charge and discharge cycles. You may choose to replace your battery when it no longer holds sufficient charge to meet your needs.
The page you link to says it will be replaced by Apple if it drops to below 50% capacity while covered. The actual quote is:
Your one-year warranty includes replacement coverage for a defective battery. You can extend your coverage to two years from the date of your iPhone purchase with the AppleCare Protection Plan for iPhone. During the plan’s coverage period, Apple will replace the battery if it drops below 50% of its original capacity. If it is out of warranty, Apple offers a battery replacement for $79, plus $6.95 shipping, subject to local tax. Apple disposes of your battery in an environmentally friendly manner.
In other word it should retain 80% of its capacity at least after 400 full charge cycles. If your battery should drop below 50% capacity while covered by warranty or AppleCare Protection Plan, it will be replaced by Apple. There isn't a way to read the number of cycles off the battery that I am aware of.
Hope this helps,
Nathan C. -
My Apple care is about to expire. Can I buy another service protection plan for my MacBook Pro
Not from Apple.
-
How to capture the execution plan for a query
HI All,
Can anyone please help me in finding out the command to capture the execution plan for a query.
Execution plan for select * from EMP where <Condtions>
it is getting executed successfully but i need to get the proper execution plan for the same.
Thanks971830 wrote:
i want to know where execution plan gets generated??
in PMON of server process or in shared pool??
i know that optimixer create execution plan..It is stored in Library Cache (present inside Shared Pool ).
select * from v$sql_plan;An absolute beautiful white paper :
Refer this -- www.sagelogix.com/sagelogix/SearchResults/SAGE015052
Also -- http://www.toadworld.com/KNOWLEDGE/KnowledgeXpertforOracle/tabid/648/TopicID/XPVSP/Default.aspx
HTH
Ranit B. -
How to run Explain Plan for SP?
Can we run Explain Plan for SP??
EXPLAIN PLAN creates an execution plan for SQL statements. PL/SQL is not SQL.
PL/SQL procedures can contain SQL, yes. These SQLs can be copied and pasted from PL/SQL into something like TOAD and execution plan determined.
However, if the aim is to see the "execution/performance plan" for PL/SQL code, then you need to profile the PL/SQL code using the DBMS_PROFILER package. This will tell you the execution path and elapsed time to execute a line of PL/SQL.
Details can be found in the [url http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_profil.htm#sthref5502]Oracle® Database PL/SQL Packages and Types Reference guide. -
$9.99 plan for Lightroom/photoshop
If I buy the $9.99 plan for Lightroom/photoshop and a new version come out next week will I be able to upgrade right away?
If you have the subscription, whenever a new version of Lightroom comes out, you get it at no extra charge
-
Hello,
I try to plan on Network Activities with ECP, however, although I configured all necessary customizing yet I cannot see any NWA on the ECP GUI.
This problem was allready discussed and solved at this forum but non of the suggestions help me to solve it.
The required configuration steps I allready made:
1. Activate planning for network activities with ECP
2. Define CO version for ECP
3. Activate multiple CO version
4. Define Alternative CO version
The network contained a costing variant for planning
Thanks and Best Regards,
Nir
Edited by: Nir Horvitz on Aug 17, 2010 9:25 AM
Edited by: Nir Horvitz on Aug 17, 2010 9:29 AMDid u activate the ECP for activities??...check below configuration.
Planned Cost ->Easy Cost Planning and Execution Services->Easy Cost Planning->Activate Planning for Network Activities with Easy Cost Plan
Venkat -
How to maintain One product cost collector for multiple materials and configuration setting
Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj
Maybe you are looking for
-
Move a image file from one drive to another drive in Presentaion Server
Hi, My business requirement is to move a image file which is in C:\ drive to another Drive ( Common Drive ). So I need to that through programming. Kindly help me in this regard. Thanks Arbind
-
HTML Tag in OBIEE 10.1.3.2.1
How to add a HTML Tag in OBIEE 10.1.3.2.1? In Dashboard object we are not getting any HTML option in this version. In 10.1.3.4 we are getting the HTML check box in the 'Text' dashboard object. Please suggest how to add HTML tag in 10.1.3.2.1. Actuall
-
I recently moved to mac and I want to know any good softwares to build simple websites. I want to host my own website but I dont know how that works with mac. I have been trying to find online but I haven't found one application that would work for m
-
My computer won't find any software updates, can't even do it manually. Every time I go to download something from apple it says I can't without "Mac OS X 10.5". but I cannot find this update anywhere! HELP!!
-
I forgot my user name and password iphone
I forgot my user name and password iphone