Cost roll for multiple plants

Hi,
We have multiple plants where production is carried out. I need to make one plant as standard and standard costs in all other plants should reflect the same cost. One way to do that is to manually copy std cost of each material and paste in MM02 of other plant. However can I do these as a mass transaction?
Thanks
SM

HI
Its possible....
Special proc can be defined by PP guys or you can also define as below
1. Go to OMD9
2. Click on New entries: Enter your Plant = Plant 2 (receiver plant) "SP Pr Type" = Z1 and Proc Type = F;
3. Under Special Procurement Secrion
Enter U as special procurement and Plant 1 in the Plant Field (Transferring plant)
4. Save this entry, and in Mat Master of Plant 2, specify F as Proc Type and Z1 as Special proc key
5. Run CK11N in Plant 2... and release from CK24
6. Transfer Variant in Costing variant should allow Cross Plant transfer of Current Cost Estimate
But note that, this should be used only if Production is done in one Plant and Stock transferred to other plants.... IF each plant can manufacture, then the Std cost in other plants should be based on their own BOM + Routing + Overhead rates
br, Ajay M

Similar Messages

  • Creating Costing Run for Multiple Plants

    Hi,
    Is it possible to create a costing run for multiple company codes in a controlling area, instead of creating separate costing runs for each company code?
    Thank-You

    Christian,
    I understood it and my answer is for different company codes.I did it for one of my client.
    Let me review the scenario on system.
    Traci,
    I will get back to you on this by Tuesday(2nd March).
    Thanks.Ashok
    Edited by: Ashok Raut on Feb 26, 2010 1:34 PM
    Edited by: Ashok Raut on Feb 26, 2010 2:31 PM

  • Product Costing Period end processing - for multiple plants at a time

    Hello SAP gurus,
    Does any one knows how to handle the Product Costing Period End operations like WIP calculation, Variant calculation and Settlements for multiple plants (but not all). Even if knows how to do it as a period end batch job, that would be nice.
    I know that we can handle this with Closing Cockpit.  But i am looking for anything other than Closing Cockpit
    Thanks in advance
    Surya

    Hi
    Apart from CO Closing cockpit, you can use the following programs to schedule the background jobs
    T codes   -              Program names
    CPTD    -                   RKWTP_CPTD
    KKS1    -                  RKKKS1N0
    CON2    -                  RKAZCON2
    KKAO   -                 SAPKKA07
    CO88    -                 RKO7CO88
    Regards
    Ajay M

  • How to maintain One product cost collector for multiple materials and configuration setting

    Hi experts,
    my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
    I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
    please guide me in the same.
    Thanks in advance.

    Hi Shripad,
    you cannot assign same  Product cost collector to different material.
    Because you creating cost collector for material combination of material /production version,material /Bom Routing.
    so please create individual cost collector for every material.
    if you have any query kindly revert back.
    Please mark the answer as helpful if it is helpful to you.
    Because march 5 onwards scn has stopped awarding points to liked content.
    Starting now: No more points for likes on comments/replies
    Thanks & Regards
    Sandeep Kumar Praharaj

  • Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items

    Hi All
        Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
    NOte:  Suggest me the  Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
    Regards
    Shivakumar Bandari

    Hi,
    Here is the sample code to do that...
    *---> po header data
      wa_poheader-vendor    =  your vendor..
      wa_poheader-doc_type  =  Your doc type..check with Functional contact....
      wa_poheader-purch_org =  Purchasing Org..
      wa_poheader-pur_group =  Purchasing Group
    *---> po header data (change toolbar)
      wa_poheaderx-vendor    =  'X'.
      wa_poheaderx-doc_type  =  'X'.
      wa_poheaderx-purch_org =  'X'.
      wa_poheaderx-pur_group =  'X'.
    *---> poitem data
    data: item like ekpo-ebelp.
    item = '0010'.
    loop at t_parts.
      it_poitem-po_item  =  '00010'.
      IT_POITEM-PLANT    =  Plant..
      IT_POITEM-STGE_LOC =  Sloc...
    *---> poitemx (item data change toolbar)
      it_poitemx-po_item  =  '0010'.
      it_poitemx-po_itemx  =  'X'.
      IT_POITEMX-PLANT    =  'X'.
      IT_POITEMX-STGE_LOC =  'X'.
    *---> add record's to internal table
      APPEND:  it_poitem,
             it_poitemx.
    endloop.
    *call bapi_po_create1
      CLEAR v_ebeln.
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader         = wa_poheader
          poheaderx        = wa_poheaderx
        IMPORTING
          exppurchaseorder = v_ebeln
        TABLES
          return           = it_return
          poitem           = it_poitem
          poitemx          = it_poitemx.
    *---> check the return table for error message
      READ TABLE it_return WITH KEY type = 'E'.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      endif.
    Thanks,
    Murali

  • Restrict PO creation for multiple plants for same company code

    Hi Gurus,
    We want to restrict PO creation for multiple plants in the same company code. Based on Standard SAP settings for Purchasing organization assignment with multiple Plant and multiple Plant assignment with single company code, this is happening. Is there a way that we can restrict by doing some customization change.
    Any thoughts or ideas will be highly appreciating.
    Thanks and Best regards,
    Karun Kumar

    Hi,
    Said functionality is not available in SAP standard.
    To avoid the same ,i can suggest implement release strategy for PO,and then higher authority / commercial team can check created PO,if multiple plants available in single po then they have the option of rejection for the same.
    Or else check BADI-ME_PROCESS_PO_CUST,take the help from abapor and apply the restriction to select multiple plant in PO.
    Hope this will resolve your query,
    Thanks & Regards,
    Sandesh Sawant

  • Release strategy is not getting Trigerred for Multiple Plants in PO.

    Dear gurus,
    I have a Release strategy which is working Fine when I create a PO with Same Plant in line items.
    But My release strategy is not getting trigerred when I have Different Plants in Line items.
    I have Maintained all the Plants in the characteristic Values of Plant.
    Why does the RS work for Single Plant & doesn't work for Multiple Plants in the same PO.
    Is there any SAP Note applicable to this? Pl Suggest.
    Thanks guys
    SN

    i got your point but i will again say the same thing that for item level field system is not  able to block the po if there are multiple line item in RS and that too with different values against same char as system picks only 1 value and it sends that value in RS to cross check wheteher this po needs to be blocked or not .
    now in your case system is getting multiple values against 1 field that is plant so now system is not able to send 1 in backend and hence it sends blank value in back end so system dosent blocks the po
    even if you use material group or any other item level field system is going to behave that way only that is it will not be blocking the po

  • Single Subcon Vendor for multiple Plants - CTM

    Dear friends,
    We are planning some materials with Subcontracting scenario using CTM
    Facing issue when same vendor is executing sub-con process of same material for multiple plants
    Total demand of lower level material is flowing to a single plant instead of flowing to the corresponding multiple plants
    Because of which excess planning is happening in one unit & no planning is occuring at other units which is leading to a mess
    In library, it is provided to proceed with 1050 Location type but not clear on how to proceed further
    Kindly guide on this
    Regards,
    Antony

    Hi,
    Now Planning has to happen at dummy location of type 1050 and not at 1011 to transfer demand to correct plant.
    Please check following-:
    1. If you are using PPm create product in new location of type 1050.
    2. Also check whether Tlane is created for components from plant to this new location.
    3. Suggest to retransfer all master data including your subcontracting inforecord post creation of location of type 1050.
    If you are using PDS product should get created in new location automaticaly.
    Regards,
    Santosh

  • Is ATP for Multiple Plants possible????

    Hi Gurus,
    I have requirement like this
    we are having two SAP Systems in one Sales order is raised.. and tha will pass to 2nd system with ALE. in Second system actual Availability Check will run for the plant given in the line item of sale order.
    but in second system there will be 6 plants containing the same material. here my requirement is system has to check all the stock lying in all the plans at it need to propose the plant at line item level in sales order.
    I know that Avail.Check will run for single plant. Is there any way to run this for multiple plants. at present user is changeing sales order and splitting line item into 6 line Items and performing Availability check based on that he is abelt find the in which plant stock is availble it become cumbersome process.
    is any User Exit can we give multiple plants for checking Stocks???.
    if End User is doing any mistake in doing Avail.Check it leads to Dead Stock.
    please provide your Inputs on this
    -Pradeep

    BC,
    Well, I will assume that you have been diligent and have already determined that the material masters are comparable between your qual system and your production system (I don't know what pre-production means).
    First thing I would check would be the differences between qual and prod in availability check configuration.  OVZ2.  Look especially at the 'accumul' settings.  Actually, any difference between qual and prod should be reviewed.  Differences are a no-no!
    Best Regards,
    DB49

  • EXIT_SAPLV50E_001 User Exit is not working for multiple plants case

    Hi,
    I have to update foreign trade data in Invoice during invoice creation using VF11. For that, I have written code in EXIT_SAPLV50E_001 and updated segal value. This functionality is working fine, if I have a single plant in an invoice. But customer has scenario where they can have multipl plants in an invoice.
    For multiple plants in an invoice, this EXIT_SAPLV50E_001 is not called.
    I am unable to find another better place where in I could place my code. Please help. Remember, case in multiple plants.
    Will be rewarded.
    Regards
    Arpit

    Hi Arpit,
                   Please use below mentioned user exit in T-code VF11
    he following user exits are available for tcode VF11
    Exit Name           Description
    SDVFX001            User exit header line in delivery to accounting
    SDVFX002            User exit for A/R line in transfer to accounting
    SDVFX003            User exit cash clearing in transfer to accounting
    SDVFX004            User exit G/L line in transfer to accounting
    SDVFX005            User exit reserves in transfer to accounting
    SDVFX006            User exit tax line in transfer to accounting
    SDVFX007            User exit: Billing plan during transfer to Accounting
    SDVFX008            User exit: Processing of transfer structures SD-FI
    SDVFX009            Billing doc. processing KIDONO (payment reference number)
    SDVFX010            User exit item table for the customer lines
    SDVFX011            Userexit for the komkcv- and kompcv-structures
    V05I0001            User exits for billing index
    V05N0001            User Exits for Printing Billing Docs. using POR Procedure
    V60A0001            Customer functions in the billing document
    V60P0001            Data provision for additional fields for display in lists
    V61A0001            Customer enhancement: Pricing
    J_3RSINV            Customer enhancement: Pricing
    or You can use BADI
    BADI_SD_SALES_BASIC
    BADI_SD_TO_FM
    BADI_SD_BILLING
    Regards,
        Thangam.P

  • Release Streatgy for multiple plants

    Hi All,
    I have one PO with multiple Item having different Plants.
    For Each plant i have a release streatgy with different release codes for each plant and in release streatgy  i put characterstics like
    1. Plant
    2. Value
    3. Purchase Organisation
    4. Document Type.
    Now my Question is that when i use mutliple plants for different line items of one PO.
    How will my release streagty will work ? and how it should be configured ?
    Regards,
    Pardeep Malik

    Hi,
    Your Release strategy will not work.
    In you want to get the release strategy for multiple plant then you have to define another strategy in OMGS u2013 say 01 u2013 07  as Multiple plant  and for that  strategy in CL24n mating all the characteristics  and donu2019t maintain any value for your characteristics plant and then check.
    Try it its very helpful

  • Creating Authorization for multiple plants

    Hi,
    I have one requirement that, Creating Authorization for multiple plants
    SELECT-OPTIONS:    s_werks FOR mseg-werks.
        AUTHORITY-CHECK OBJECT 'M_MSEG_WMB' 
               ID 'ACTVT' FIELD '03'
               ID 'WERKS' FIELD s_werks.
    1. If have no of plants in s_werks then how to authorize the plants?
    2.if i dont enter any plant in my selection screen how to authorize that?
    3. if i have 5 plant only then how i can authorize those perticular plants only?
    Thanks in advance,
    Thanks,
    DP.

    S_WERKS is not a field; it's a set of fields.  Use simple ABAP to select your plants and loop at the selection(s) to check...

  • Single inspection lot for multiple plant

    Dear Experts,
    I am from pharma industry, my requirement is, there is any possibility to create single inspection lot
    for multiple plant.
    please guide.
    Thanks in advance.
    Yuvraj S. Dhotre

    Don't open multiple threads for same query. It makes the solutions to be scattered.

  • CS15 for multiple plants

    Hi
    Please inform, How to get report similar to  CS15 output for multiple plants?

    Hi Bhurke,
    If you want to search Material Where-used list for multiple plants, then in CS15 first screen enter where used material number and in second screen under Plant give * ( Star symbol) and execute. System will display the Material where used details across multiple plants.
    Thanks & Regards,
    Ramagiri

  • MB56 - For multiple plants

    Hi All
    My requirement is to make MB56 run for multiple plants and plant should not be a mandatory field as currently is in MB56.
    Kindly let me know if there is any way i can do it.
    Thanks and Regards
    Shilpa

    As this tcode is an Module pool.. so the only way to do is.. copy these 2 programs RVBBWULS and RVBBWULS0100 to ZRVBBWULS and ZRVBBWULS0100. the Rest of the programs in this need to be the same (don't copy the other's)  now go head & comment the line of PA_WERKS
    as below..
    PARAMETERS: pa_matnr LIKE mcha-matnr    MEMORY ID mat.
               pa_werks LIKE mcha-werks    MEMORY ID wrk.
    select-options   pa_werks LIKE mcha-werks    MEMORY ID wrk.
    I think this might work...

Maybe you are looking for

  • Service Desk - Expert Mode - Not all actions are available

    Dear SAP colleagues, I have just implemented the Service Desk in our SOLMAN system. 1. I choose Incident Management 2. I click on Queries 3. I click on a ticket (Transaction ID). 4. I edit the message 5. When I select Actions, I only have the 4 follo

  • List View like Library

    Hello All, Can we create a list view similar like Library Palette. If so which widget needs to be added on the palette. Basically we would like to show multiple columns as in library palette and allow the user to select one or multiple cells from the

  • SOA suite 10.1.3.3 with OHS Apache 2.0 ... mod_oc4j errors

    Hi all, I have a SOA Suite 10.1.3.3 environment fronted by Apache 2.0. Installed OHS 2.0 from the Companion CD in a new OHS ORACLE_HOME Installed SOA Suite 10.1.3.3 in a new J2EE ORACLE_HOME Can access the consoles ok (BPEL, ESB, etc ...). Can access

  • Jar file , which jdk version ?

    I have a question that i want to ask for a long time. Let say someone give you a jar file, how do we check which version of JDK it is compile ?

  • Outlook 2010 Starts but is not Visible

    Outlook will start but no window will show.  The task bar shows Outlook is open and I can right click "New Message" (and all others) and it will show.  But the main window is gone.  Recently (last couple of months) the window has been opening very sm