Cost to dial mobiles in Liberia has doubled.

It used to cost 35 cents per minute to call mobiles in Liberia, West Africa from the United Staates on Skype. Then without warning on April 1st the price doubled to 70 cents per minute.
This is bad customer service. As a frequent called to Liberia why wasn't I notified about this? Well needless to say I won't be using Skype anymore to call Liberia. The Vonage rate has not changed and it continues to be 35 cents per minute. Hello Vonage goodbye Skype.

If you contact Live chat https://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums  they should be able to help.

Similar Messages

  • HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month.  I've disabled apps s not many running.  Any suggestions?

    since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month.  I've disabled apps s not many running.  Any suggestions?

    I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

  • IPhone has double emails

    My iPhone has double emails, but the Mac, MobilMe, iPad all have single emails.
    This happened after installing Lion.
    What should I do to get rid of the double emails. And stop receiving duplicate emails in the future.

    what kind of email provider are you using? (gmail, yahoo, comcast) And check your mail settings to make sure mobile me didnt mess up and add your email twice.

  • Call cost to Israel Mobiles

    When are Skype going to finally update the call cost to israeli mobiles.
    So many people have mentioned it, and nothing has been done.
    The termination rates of israeli mobiles have been reduced yet skype are still charging the same prices.

    Skype just passes along the carrier costs to its users, whereas they should be squeezing them mobile carriers for discounts for its large user base.
    The rates/pricing and other info posted on the Skype website lead me to believe Skype is trying to get all users to buy subscriptions rather than use Pay As You Go plans. 
    I am increasingly using FACETIME as it works better, has a new Audio Only mode, and is completely FREE. Try it. Any mac, any iOS device anywhere in the world.  
    Skype has had a great run, but its days are numbered unless it keeps up with better technologies. 

  • Call cost to uk mobiles

    When are skype going to reduce the call cost to uk mobiles, as in the last couple of years the termination rates have been reduced to almost half yet the call cost is still the same.

    Skype just passes along the carrier costs to its users, whereas they should be squeezing them mobile carriers for discounts for its large user base.
    The rates/pricing and other info posted on the Skype website lead me to believe Skype is trying to get all users to buy subscriptions rather than use Pay As You Go plans. 
    I am increasingly using FACETIME as it works better, has a new Audio Only mode, and is completely FREE. Try it. Any mac, any iOS device anywhere in the world.  
    Skype has had a great run, but its days are numbered unless it keeps up with better technologies. 

  • PLEASE HELP!!! My 'Apple mobile device helper has stopped working'!

    Today i bought the new 3G iPhone so i went online to download the new 7.7 iTunes software. Now when i go into my iTunes a Windows pop up appears telling me that my 'Apple mobile device helper has stopped working' and that it is diagnosing the problem. The thing is that it doesn't diagnose the problem, the same box just keeps popping up over and over again.
    I am not very computer literate and have tried everything that i can think of but nothing has worked.
    Please can someone help because i'm absolutely dying to use my new iPhone; i queued up from 6 am to get my hands on it! :0(

    I'm just a simple user. I don't know how to fix it any more than any of the other posters with this problem. I've looked around in control panel, done some poking and prodding with services and processes, and can't find a reasonable way to stop the messages without completely hosing up iTunes. I know the messages are annoying as ****, and nobody likes the idea, but sitting around and doing nothing is sometimes a whole lot better then doing something that makes it worse. See if you can find a document from Apple that tells you how to go back to the previous version of iTunes. I've seen that course of action mentioned several times for previous releases of iTunes upgrades, so the instructions for it must exist in another forum.
    I just think, from the number of posts, that Apple is going to have to get a fix out pretty quickly, because this error pretty much shuts down their products on the Windows platform. They can't afford to let it go on for very long.

  • "Mobile Device helper has stopped working" after installing most recent

    OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
    After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
    _*Steps I have taken :*_
    I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
    *The two messages that I continue to get when I open iTunes and connect my phone:*
    1) "Mobile Device helper has stopped working"
    2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
    The most recent error message under "Problems Reports & Solutions" on my start menu read:
    Product: MobileDeviceHelper
    Problem: Stopped working
    Date: 4/7/2010 3:42 PM
    Status: Not Reported
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application Version: 16.691.14.1
    Application Timestamp: 4ba3b8fe
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.550.17.21
    Fault Module Timestamp: 4b8cb530
    Exception Code: c0000005
    Exception Offset: 0000db6b
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    This is the same message that I have received the last 10 times under Mobile Device Helper.
    *Please PLEASE please*, does anyone know how to resolve this problem?
    *Thank you SO MUCH for any insight.*
    -signed, UGH!!!

    Hi,
    I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
    I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
    Really frustrating and disappointing.

  • Mobile Device Helper has stopped working

    I have just purchased an iPhone 3Gs, I have the lastest version of iTunes (9.1) and am operating on 32-bit Windows Vista using an Acer laptop.
    First, the iPhone was not recognised - so re-installed iTunes, downloaded Service Pack 2 for vista, reinstalled iTunes. Did't work. Finally found a forum that lead me to delete a problem file for Acer laptops (can't remember its name now) but then my iPhone was now recognised!
    Secondly, tried to sync my windows contacts (all my old contacta list from old phone) then had syncing problems..through more forums that error message stopped but now I have a new one that I can't get past...
    'Mobile Device Helped has stopped working' comes up repeatedly and will not let me to anything with iTunes as it freezes until I end task in Task manager.
    I have looked into other forums that talk of deleting the Apple Mobile Device, but it doesn't seem to me to be the rigt decision as the majority of people have just had to reinstall iTunes as it wont recognise the phone without the file.
    It seems that the new iTunes doesn't like Windows Vista.
    Please can anyone help me get past this point before I lose the will to live!! (it's been over 5hours now!!!!)
    Thanks

    Sort of the same issue.
    Windows Vista 64bit Home Premium.
    I just launched iTunes for the first time after installing 9.1. When I connected my iPhone, iTunes told me that I needed to install a newer version of Apple Mobile Device, which entailed removing/reinstalling iTunes and AMD. I remember there being an order to which applications should be removed, so I did that, but got stuck at AMD. I wasn't able to remove it. There was no error message, it just automatically rolled back the uninstall process and quit. I did some research and saw someone recommend using the Windows Install Cleanup Utility. I used that to remove AMD, and it worked. Next on the list was Apple Application Support (?), which also could not be uninstalled by normal means. So I used WIC on that as well. iTunes, Bonjour, Quicktime, and Apple Software update I was able to remove via the Control Panel. I rebooted, reinstalled iTunes, and when it began the install process for AMD I got this message:
    "Could not open key:
    Unknown\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\3F55235DF871F046A8F862841205 6EF. Verify that you have sufficient access to that key, or contact your support personnel."
    Got the same message for Apple Application Support. As a result, neither was installed.
    Prior to doing any of this, I had disabled AMD in Services, which didn't help. I have since re-enabled it, and it is still running in Services, although it does not show up in the list on programs to uninstall.
    After all this, I read in another forum that simply doing a Repair on AMD would solve the problem, but since I am unable to reinstall it, I cannot test it out.
    Message was edited by: Zachary Prewitt

  • When I plug my iPod touch into computer it says "this Ipod cannot be used because the Apple mobile device service has not started

    When I plug my iPod touch ino the computer it says "this ipod cannot be used because the Apple mobile device service has not been started. The screen shows to plug it into itunes and will not do anything.

    Have a look here:
    iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Apple mobile device service has stopped working - continues

    Hi
    I have a 16GB iPhone with 02 in the UK.
    My first iPhone with 02 had trouble receiving calls with about 90% of incoming calls going straight to voice mail. I also couldn't backup that phone as every time I tried with iTunes, i got the message "Apple mobile device service has stopped working" about a minute into backup.
    This happened continually, I re-installed iTunes so many times, still with little luck. I tried a different cable too. All on a brand new Dell Vostro desktop PC.
    So, I took the phone back to 02 with these problems. 02 promptly replaced my iPhone.
    Now, I have exactly the same problem. I obviously have nothing to restore on the iPhone as I was never able to back it up in the first place.
    Every time I try and backup the iPhone I get the error "Apple mobile device service has stopped working". Again i tried a different cable and have removed and re-installed iTunes several times.
    Anyone any ideas?
    Regards
    D

    I was having this same problem with my new iPad 3G. It was driving me insane and preventing me from syncing the iPad.
    I removed and re-installed all Apple components from my computer as recommended (in the recommended order). But, the problem persisted.
    The error message looked just like the one posted above:
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application Version: 16.691.14.1
    Application Timestamp: 4ba3b8fe
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.550.17.21
    Fault Module Timestamp: 4b8cb530
    Exception Code: c0000005
    Exception Offset: 0000db6b
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    The SOLUTION came when i discovered that there were two copies of CoreFoundation.dll on my computer.
    One was in C:\Program Files\Common Files\Apple\Apple Application Support.
    The other was in C:\Program Files\Common Files\Apple\Mobile Device Support.
    I removed the copy of CoreFoundation.dll from the Mobile Device Support folder, and the problem vanished.
    I hope this helps.
    -Steven.

  • When i Put my Ipod Touch 2nd gen in my computer it says Apple Mobile Device Service has stopped working and does not show up in itunes Help?

    well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
    ipod touch 2nd gen
    http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png

    Try this:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I have a Panasonic FZ38 HD camera. I can load and view my hd movies onto iMovie with no problems via my camera or a card reader.  When I try to copy my hd videos from my old Windows pc to my new iMac, the picture speed has doubled but the sound is normal.

    I have a Panasonic DMC-FZ38 HD camera and have lots of hd movie clips stored on my old Windows Pc using Photofun software supplied by Panasonic, which I want to transfer to my new Imac computer.   I am able to copy my most recent movies that are still on the memory card from my camera onto Imovie and view them with no problems at all.  When it comes to copying my old existing hd movies stored on my Windows Pc (and which are no longer stored on a memory card), I discover that when I view them on the Imovie, the speed has doubled but the sound is normal.   In order to transfer my old movies I have copied them back  onto a memory card (SDHC - the same card as previously used) and then put the card back into my camera and then copied them onto my Imac via the camera USB.   I have also used a card reader but get the same result.     If I view the same movie through my camera, or look at it on my old pc, it plays at normal speed.    Does anyone have any ideas as to why this is happening please?

    have you read and watch the Tutorials..? :
    http://www.apple.com/ilife/tutorials/#imovie
    iM is a bit.. iffy, when it comes to the definition, what a 'camera' is. historically, only tape based machines were a movie-camera. nowadays still-cams allow movin' images too..
    but, as mentioned above: the intended workflow is: material from photo cameras (even when they move) => import via iPhoto; material from video cameras (even when they don't move.. ) => iMovie
    when the import is done, you'll notice in all iLife apps the 'media browser' - in iM09, on the very right, the icon with a camera on.. click it, presto, all (incl. your 'videos') your iPhoto Library at hand for usage in iMovie.
    watch this:
    http://www.apple.com/findouthow/movies/imovie08.html#tutorial=otherimport
    (about from midths of tutorial...)

  • Restored my iMac from Time Machine now Hard Drive has doubled! Need Space!

    I Restored my new (refurbished) iMac 2010 (Snow Leopard 10.6.4) from Time Machine now the Hard Drive has doubled 450GB to 900GB. I want to recover the space on my hard drive, What do I do?
    Side Note: My previous iMac (2007) died so I went and bought a refurbished model here. My old iMac had 10.6.8 installed versus my "new" iMac has 10.6.4 installed. I can't restore from my Time Machine since it was from another model.

    Since it's a new (refurb), boot with the install disc, wipe the HD, and reinstall the OS. On first boot, don't migrate, but create an admin account using the same username/password combo as on the TM backup. When finished, run Software Update, and bring it up to 10.6.8. Then, mount the TM HD and try restoring. Life would be so much easier if you had a bootable backup/clone. Instantly able to migrate.
    For more on TM, see Pondini's TM FAQs.

  • Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • When I click on a web link to open in a new window - it has double bars, no URL...

    When I click on a web link to open in a new window - it has double Browser bars (chrome), no URL. I close that window and do it again it often works correctly.
    I have made screen shots and placed at pageaccess.com/FireFox_5-6_issue.pdf

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Using Apps on Multiple Devices

    When you buy an app like iPhoto is it avalable on all you ISO devices or must you purchase a copy for each device?

  • How to change color of a report/form

    Hi, I am new to APEX. I have created an interactive report and using Theme-9 Simple Gray. I want to change background color of this report and form. May you please giude me. Thanks in advance.

  • AMT Subsystem Failure Error: 11

    I just downloaded a trial version of Fireworks on a Mac Dual 1.8 GHz PowerPC G5 running MacOS X 10.5.7. This is the error message: AMT Subsystem Failure (a bunch of text saying that you need to restart) Error: 11 Restarting didn't work. Calling tech

  • Dreamweaver CS3 crashes HELP!

    I'm working on a project in DreamweaverCS3 using Coldfusion 7.0.2. I have a page that has some drop down menus that are populated via a coldfusion query. When I click on the <cfselect> statement line (I need to edit this one value to fix the page), D

  • SAP UR Design/Themes perspective not available.

    Hi, I can't see <b>SAP UR Design/Themes</b> perspective in my NWDS. I am having NWDS 7.0.11. Is it not available in this version? Thanks and Regards, Deepti