CostCenter in Asset Master Record
Hello Gurus,
Our client is using Location field in the asset master record for property tax filing.
So it is required field in asset master record.This location field is same as cost center field,means the data is entered in the cost center has to be entered in Location field also for reporting purpose.So everytime when a new cost center is defined there is a need to define new location also from FA side.My question is ,Is there anyway that when a cost center is created that this can get added into location table? Or, can this table be updated without it being configuration?
Please advise me.All your thoughts are greatly appreciated.
Thanks,
Geeta.
hi,
is this field TXJCD or STORT from table ANLZ ?
you must put a validation or modification in exit COOMKS02 or
COOMKS03 (tcode SMOD)
-> from here you can create an entry in cu-table T499S resp. TTXJ
regards Andreas
Message was edited by:
Andreas Mann
Similar Messages
-
About Create Asset Master Record
hi expert,
when use the tcode as01 to create an asset master record.
there is a location filed and the location relative to an address number .
my concerns that how can we maitian the address number or do we just pick
one from the table adrc?
thanks in advanceHi,
Check whether the asset class is locked in for your depreciation area in T Code AM05. If so, remove the lock.
Regards,
A.Saravanan. -
Equipment master record updation in Asset master record
Dear Friends,
I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
Thanks,
Dwarak.Hi,
Thanks a lot for your reply.
I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
Thanks
Dwarak. -
Error in Asset Master record creation
I have created one asset class 1001 for land and 3001 for Vehicles by myself (i.e. without reference)
I have filled all account determination, screenlayout, etc.
When i create asset master record for LAND, i enter asset class 1001 (for land) & it accepts.
But when i create asset master record for Vehicle, i enter asset class 3001 (for vehicle). But it throws error.
Error shown is:
Chart of depreciation IN00 that was determined is not entered for asset class 3001.
_How to rectify the problem ?_
Help with Tcode or menu path.
Further to rectify,
I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
But error shown is:
Chart-of-depreciation-dependent assignment to asset class not possible
(Message no. AC012)I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
But error shown is:
Chart-of-depreciation-dependent assignment to asset class not possible
(Message no. AC012)
Solution given is:
In order to be able to assign chart-of-depreciation-dependent data to asset class 1001, the following conditions have to be met. You have to have already
1. Defined at least two active charts of depreciation
2. Assigned asset class 1001 to more than one chart of depreciation
However, at the moment this asset class is only assigned to chart of depreciation 1.
I m unable to understand the solution
Edited by: Deepak Agrawal on Mar 19, 2009 8:06 PM -
Error occurs during Asset Master Record Creation.
Hello SAP Gurus,
The error occurs during asset master record creation.
Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
ERROR: - as below
u2003
SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
*Message no. AA613*
*Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
Procedure
Maintain the assignment of the periods for the period control entered.
Proceed
If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
Please find enclosed attachment for clear description of the error.
Please share your experiences regarding this subject.
Thanking you in anticipation.
Regards,
Suresh.
09986375966Hi,
have you generated the period controls properly? If not, the error is raised correctly by the system.
To generate period controls go to:
IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls / or you can use OA84
Regards,
Markus -
Insurance view disappear in Asset Master record
Hello,
I can not see The insurance View while creating/changing or displaying Asset master record.
What can be the resons ?
I checked the customizing (Define Screen Layout for Asset Master Data) but the insurance view are alreeady defined as " Optional ".
What can i check also ?
ThanksDear,
Tarek.
Please go to T.code ANSICHT and look for the respective that No Authorization Radio Button is not selected. I think this may be the problem in your case, it is selected. I hope this helps you.
ANSICHT manages the asset views with the option of Master Data & Depreciation Areas.
If you need any clarification. Please revert back. I hope this may solve your problem.
Regards,
Pankaj A Bhalerao. -
WBS Field in Asset Master Record
Hi All,
Currently we are working in 4.6 C version.
The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
The standard functionality is available in ECC6
Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
Regards,
NitinHi
@ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
@ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
I never worked on 4.6, but I guess WBS must be allowed for usage
br, Ajay M -
Screen Layout Field in the Asset Master Record
What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay -
Trouble with updates of Asset Master Record via BAPI_FIXEDASSET_CHANGE
Good day,
I'm using functional module BAPI_FIXEDASSET_CHANGE in order to update time dependent data in Assets Master Record. Although I'm updating only time dependent data and net worth valuation, some other fields are being changed too - country dependent fields for example. Could you be of any assistance to me and tell me if there's a customization for updating of these data, because I think there is one.
Thank you in advance.Hi,
yes, the main functionality within the BAPI is done in function ASSET_MASTERRECORD_MAINTENANCE. If it really does not happen in AS02 but only with the BAPI I think you could open a service ticket to SAP.
Regards,
Markus -
Settlement of AUC Cost to Asset Master Record
Hi,
Can any body tell me where the error has occured when i am settling AUC costs in Project to asset master record via the transaction AIBU.
The exact error message is:-
BALANCE IN TRANSACTION CURRENCY
Message no. F5702
Diagnosis:-
The balance has occured in transaction currency " ZAR"with the following details:-
Exchange rate '00' amount '2000' and currency key 'ZAR'.
The data in transaction currency was transfered from the calling application.
System Response:-
Your data cannot be processed in FI.
Procedure:-
The error is probably in the calling application.
Thanx in advance.
Regards
SantoshThere doesn't seem to be an exchange rate between the two currencies that the system is using. Apparently, you are using at least two currencies- perhaps a currency in depr area 01 and then a different currency is assigned to the controlling area currency.
Check to see if the exchange rate is maintained in your exchange rate table - in the IMG go to SAP Netweaver > General Settings > Currencies > Enter Exchange Rates. See if there is a rate setup between ZAR and the other currency that is being used.
I believe it uses a Month End rate, and it must be set up for the date the settlement is taking place.
Hope this helps! -
Cost center change in the Asset master record
Hi
When ever cost center changed in the Asset master record, can it possible what ever the dep that is posted to previous cost center,that will automatically transfers to the new cost center,is there any programme for this,i can use repost functionality in controlling,some time many copst centers changes will happen in
our system,so can any tell me how to automate this.
Thanks
LilyHi,
Automatic transfer to new cost center is not possible.
You need to use Distribution or assessment to re allocate the expenses to new cost center.
Regards,
Murali
If it is useful, award points -
Settle AUC costs to Asset Master Record
Hi,
Can any body tell me where the error has occured when i am settling AUC costs in Project to asset master record via the transaction AIBU.
The exact error message is:-
BALANCE IN TRANSACTION CURRENCY
Message no. F5702
Diagnosis:-
The balance has occured in transaction currency " ZAR"with the following details:-
Exchange rate '00' amount '2000' and currency key 'ZAR'.
The data in transaction currency was transfered from the calling application.
System Response:-
Your data cannot be processed in FI.
Procedure:-
The error is probably in the calling application.
Thanx in advance.
Regards
Santosh
Message was edited by:
Santosh SinghHi,
In my view its because of the difference of amount between two currency is not been settled. Most of the company maintained same using T-Code S_BCE_68000174 on-line or manual. Please check the updating happening properly or not.
Enjoy SAP .
Dont forget to give points if its useful ans.
Namskar,
Ketan Dave -
Flow of Data to Asset Master Record
Hi,
I created a Asset Master record. In 'Origin' Tab in asset master record, there is a space for writing Vendor NAme, MAnufacturer, Acquisition Year, Original Value, etc.
After i create Purchase Order or acquire asset through F-92, i noticed that vendor name, value, etc does not flow to the Asset Master Record.
Please let me now how the data will flow to asset master record ?
Am i missing any entryDear Deepak,
please check the Tcode AW01N , this for asset explorer.
In this screen if you select Purchase Order in Object related to Asset tab from the left side of the screen , you will get all vendor details for particular asset.
You can able to see the Migo details also......
If you have any doubt plz let us know.......
Regards,
Pavan. -
Business area default in asset master record
Dear all
Here is one ticket pertains to asset
when i create asset master record business area will be defaulted
the problem is when i upload asset master record through LSMW
by different business area the system throws a error message BUSINESS AREA EXISTS WHICH CANT BE REPLACED THROUGH LSMW
This is happening for all the asset classes
so i want to remove that default business area from where should i remove that which t-code or menu path
regards ravindra kumarDear ravinagh
removing of business area in asset master record is always possible but
see when u r uploading bulk asset master records through LSMW we cant replace the business area as it is already defaulted in asset master record
means some where we have assigned the default values to the asset classes or some other master record
so we have to find out the source of the defualt business area for asset master record
when we remove this from the asset classes then the business area will not be defaulted so that we can upload assets from LSMW with different business area
so please try to find out the source....................
regards
ravindra kumar -
Group box in asset master record's tab overlap each other
Hi Gurus,
I was wondering anyone has seen the same issue that I'm experiencing. I'm on EHP6 and have logged the issue with SAP but wondering if you've faced the same problem.
I basically designed a new tab layout with 2 tabs and assigned the following group box to the 1st tab
S0001 General
S0003 Time-Dependent Data
S0002 Posting Information
S0013 Equipment
to the 2nd tab I only assigned
S0009 Origin
S0100 Depreciation Areas
Then I assigned the new tab to the asset class.
Now when I create the asset through AS01, the tab and group boxes appear however the time-dependent group box overlaps with posting information (please see below). Have you experienced the same issue in your environment?
Thank you.Dear Minab,
This is definitively the problem of overlapping of the layouts.
The asset master data transactions AS01, AS02 and AS03 uses a generic tool to define the screen layout. Unfortunately there are some restrictions on that tool which are based on basis functionality.
The problem is caused by compression and resizing (note 203023)
Since Release Enterprise there are more fields on that screen in Release Enterprise than before.
Hence, the problem is caused by the definition of your asset layout the solution in your case could be to move the screen to an own subscreen or to move this screen to the end of the tab.
Please go the customizing (transaction SPRO) and follow these steps:
Financial Accounting -> Asset Accounting -> Master Data -> Screen
Layout -> Specify Tab Layout for Asset Master Record -> Define Tab
Layout for Asset Master Data
Select in your layout the relevant tab page.
Here you may need to change positions and group boxes around. Unfortunately there's no other solution possible due to technical restrictions.
best regards Bernhard
Maybe you are looking for
-
Time machine is trying to back up more then the drive has on it
I'm doing an intial backup on a fresh Time Machine drive ... my computer has 1.66TB of files there are no external drives etc selected. Time Machine wants to back up 1.98TB !!!! It wants MORE then the drive has on it !!!!! How is this possible ... Cr
-
My mac isn't working! Please help!
Hi Guys, hopefully someone here will be able to help me out with a massive problem with my MacBook Pro. The macbook turn on fine, all boots up but then wehn OS X is loaded I cannot do anything, the mousepad and keyboard are unresponsive, the only but
-
I just installed a LaCie 3TB harddrive on my iMac and now my iTunes won't open.
I just installed a LaCie 3TB hard drive on my iMac and my iTunes will not open. It says some kind of error. The dude at the apple store told me this would be really easy to setup - total fail! Please help, I am not good with technology.
-
Best practice for cleaning up conversations after a recieve timeout
We have a pattern where sql server sends a message through service broker and waits for a response (say 10 ten secs), if it doesn't get a response, it will assume a default response and carry on. The response may come later and also end the conversat
-
Enhancement Request: Sorting column-names AND Saving Package in clipboard
Hi, I would like to have the following features: - Sorting with the column-names (A-Z) would be very nice like I can do in the worksheet or the columns-tab but not in the data-tab - Saving source code of packages not only to file but to clipboard. Th