Costing by Customer

Hi,
Do we have any provision in SAP for doing COSTING based on customer. Any table info which contain COGS information.
Regards,
Venkat

Customer per se, no.
Ho wmany customers do you have? How many costings per customer do you want? Are you talking planned costs, or actual costs?
You have sales order costing, you have project systems, you have COPA. Depending on your requirements, you can use them.
E.g. if you have one 5 year project that you need to costs, you would do it in PS, and you would have customer costing.
You should really give more information if you want a meaningful response.

Similar Messages

  • Shipment cost in customer billing doc

    Hi all
    I want to include shipment cost in billing document I want to know the detail process.
    After rising shipment cost doc vi01 this will get reflected in
    Shipment doc vt01n
    I need to charge the cost to customer .i want to include cost in customer billing document VF01
    I want to know from shipment document how will the condition types will be copied into billing document
    1.Should I have to maintain any copy control between these two docs?
    If yes what confi settings need to be done
    Pls let me know  the steps in detail
    regards
    srijen

    Hi mukund thanks for reply
    in copy control i need to maintain "D" or "F"
    i want to know from shipment cost document Vi01 how the conditions are copied to delivery document
    for example- i maintained ZF01,ZF02 in shipment cost doc and i need these two conditions to be displayed in customer billing Vf01
    1) from shipment cost doc how i have to get them in billing doc
    what confi settings are needed
    regards
    sujan

  • Landed costs and custom duty

    Hello
    I have an issue with landed cost and customs duty
    The actual customs duty when it is corrected is OK when you use one supplier and one good receipt
    when it is with many suppliers and many goods receipts and when you want to correct the actualduty the split is wrong it brings the same value for every item and the split is wrong because it must be based on the item line value...
    Did anyone experience the same issue is it corrected with an more recent patch or is there a workaround ?
    SAP BO1 2007A PL39

    I am afraid if you need to correct a landed cost with many suppliers and many goods receipts, there may not have any available logic but reverse the entire transaction and redo it.  Line item correction for financial transaction may not be possible due to system restriction.
    Thanks,
    Gordon

  • Tracking freight costs by customer - options?

    I have had a request as to how to track profitability by customer.  This is to include freight.  The freight price to the customer is included in the material unit prices, but the costs are billed separately.  Currently there is no link (other than via cost centre booked on Purchase Invoice) between the cost of the freight and the income.
    I would like to know what options there are available to link freight costs to a customer, sales order or sales contract.
    ECC modules: MM, SD, FI, CO, HRM, BW

    Ok, thanks for your reply.
    But the problem is that all costs item categories have the same configuration, all are availabe to create PO per month. So I don´t know why many PO are created, what logic SAP is using to create many PO to the same vendor.
    Can you explain me that ? Or it would be a MM issue ?
    Thanks a lot.
    Renato

  • STO Scenarion with - Ve cost as custom duty

    Hi,
    I have created a condition type let say X1,
    I am doing a STO scenario, from Plant A100 to Plant A101 in company Code A001
    Now requirement is use condition type X1  for values as - ve as well as +ve depending on situation.
    I am able to do so, by choosing
    Cond. class : A
    Calculat.type :A
    Cond.category: -- Blank
    Plus/minus: -- Blank
    Challenge I am not able to book planned  Freight Invoice for + Ve Acrual case ,as I am not able to Maintain vendor for that condition type .
    Any one having idea to meet the requirement for same condition type with +/-  value depending on situation.
    Regards
    Sunami

    Business Scenario as below.
    We are used to do STO intra company  from plant A100 to A101 , we have a condition type X1, which is used to load the cost to Material as we are paying the amount 10% to customs.
    And we are doing Planned delivery Cost Invoice booking for UB Purchase order.
    In some cases we are doing reversal from A101 to A100, in that case we want a reversal amount which affects the MAP of material too.

  • Calculate costs on customer-orders

    Hello,
    I'm unexperienced to IP / BPS (but I'm very experienced in BW! )but have to make proposal to a new project.
    We have to calcuale the margin of our customer orders.
    Therefore I have the following idea.
    Take orders, different attributes and quantity from Order-InfoCube (already available in BW with order - customer - quantity-revenue1-revenue2)
    Upload cost per Euro / Tonnage into IP (I have 10 different sub-cost-tables).
    My question is: how can I reach, that Tonnages from orders are multiplied by costs Euro / Tonnage ?? Can I write a formula like: (take attribute 1 and Quantity) * (cost per Euro/ Tonne) from Cost-Table 1 and write Keyfigure Cost_Attribute1 to a new Provider?
    At the end I want to build a query where I can report order - customer - orderd quantity- revenue1 - revenue2 - cost - margin.
    Thanks for your replies,
    Thomas

    Dear Harihara,
    <b>You must have all manufacturing master data associated with your manufactured material(s) set up.</b> This includes bills of material, work centres, routings, and activity prices. If you are charging overhead, you must also have maintained the costing sheet and the material master overhead key field.
    Hope this is helpful.
    Regards,
    Naveen.

  • Calcualtion of Material cost  for custom  program

    Hello all
    For a particular cost estimate we need to calacualte only the material cost in that particular material
    and thi swe required for all the material
    i had checked all the costing related table but not able to do tha
    kindly help
    anil

    Hello
    For get the only material cost for a standard cost estimate run material
    you hav eto use a standard BAPI and no need to write a full program to calcualte the cost.
    BY this badi you will get all the data only you have to get the report in required foramt.
    The BAPI is BAPI_COSTESTIMATE_GETEXPLOSION
    thanks
    alok

  • Need to Charge only Excise Duty Cost to customer.

    Hi Gurus,
    I need to sell lot of materials.Out of all these material , i have 1 material whose only excise duty price, i need  to charge to customer not the actual price
    On the basis of its price the excise duty will get calculated.
    How should i proceed?Pricing procedure is same for all customers.Pl. Help me regarding the same.

    Create one more condition type with calculation type as percent with negative sign in V/06.  Have the access sequence as Customer / Material (or whatever combination you require) and maintain 100% in VK11. Maintain this condition type before your excise condition type and assign the From-To step number accordingly. 
    So whenever you create sale order, system will search for this combination and wherever, you maintain 100% discount, this will reflect in your sale order and accordingly, only the duty portion will get debited.  Wherever you have not maintained the 100% discount, then the selling price and duty as well will get debited as there will be nil value against this condition type in sale order.
    G. Lakshmipathi

  • Employee and customer wise cost

      Hello Experts
    Below are my business scenario
    1.I want capture the employee wise cost so What  could be best way to capture  the employee wise expense in the below method
        Employee as cost center
        Employee as Vendor
        Employee as internal order
       IF anybody provide me advantages and disadvantage it will be  better understanding
    2. Another one of my requirement in my  business scenario  customer group wise  COPA report with  net profit  level
    Here GP level I will get it from my billing document(Revenue – COGS),  customer wise expenses I am going to capture through the cost center 
    finally  I want  to settle this cost to customer group (COPA)
    Is it Possible  ?
    Thanks & Regards
    Sri.

    Hi VS
    1. For employee wise expenses, you can refer the document I contributed below
    http://scn.sap.com/docs/DOC-50141
    The document explains how you can use Statistical IOs for this.. You can also name your Statistical Internal Orders as per the Employee Number, but I used a slightly different approach to be more scaleable
    2. For customer wise expenses, while you book the expenses in F-02 or FB60, you need to click on the "Prof Segment" and enter the Customer / Product details in it
    That ways you can capture the expenses at Customer level in COPA
    Br. Ajay M

  • Dunning costs and Dunning letters

    Hi to All,
    Any body can help me out, In this regard.,
        In the report of Dunning cost(Sendiing Dunning letters to customers)., Customers are showing but company code was not showing.How can i get the company code for those customers.
        And one more thing was customer dunning letter cost also showing differently for Customers(for one customer $ 2 and for other itwas variated to $2.50 likewise).
    Where I can see the dunning letter cost per customer.
    Thanks If in advance,
    Dara

    Hi,
    Line items should reach minimum number of days, referring to the due date of net payment, to reach a certain dunning level.
    In FBMP check you dunning interval. If line item has reached interval maintained for 2rd and 3rd level then items will not be dunned.
    Also check dunning levels for your dunning procedure in FBMP.
    If you find no problem with dunning settings then, activate additional log for the dunning run to identify exact reason for the problem.
    Thanks!
    Raju

  • Planned delivery cost for the scheduling agreement

    Hi Experts
    1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
    I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent.  Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
    Appreciate if you can suggest something in this case Urgently .
    2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post.  Please suggest if any alternate solution is available.
    Regards
    Arvind

    Hi,
    As you know if the delivery cost document is not posted during GR the
    delivery cost is not proposed during invoice (MIRO). Planned delivery
    cost will be proposed in invoice only when there are records in EKBZ
    table. The EKBZ table will be updated when delivery cost is posted
    during GR itself.
    Please ensure in the PO itself thatr the conditions have been defined
    properly with the relevant amounts and values.
    During GR when planned delivery cost conditions are present in PO,
    system checks for values in amount field. Then only appropriate
    calculations will be done for delivery cost and planned delivery cost
    document will posted during GR and hence updates EKBZ table.
    Solution to this issue is described in below steps,
    1) reverse the invoice document
    2) reverse GR document.
    3) You have to give values in amount field in relevant conditions ZGDS
       in the PO.
       If you face any issues changing the values, delete above conditions
       and put it again manually and give values in amount field also.
    4) Post GR once again, delivery cost document will also be posted.
       You can check it in PO history.
    5) During invoice select Item + planned delivery cost and post the
       invoice. If you need planned delivery cost to be posted separately,
       then you can post individual invoice for item and delivery cost.
    Please note it is not possible to post delivery costs for documents with
    multiple accountassignments. 
    For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
    Best Regards,
    Arminda Jack

  • Distribution of unplanned delivery costs during delivery cost LIV

    Hi all,
    This clarification is regarding delivery cost LIV - where difference between:
      -  the amount invoiced by the freight vendor
    and
    - the amount accrued based on PO
    is treated as unplanned delivery cost and is intended to be distributed amongst the line items of the accrued planned delivery cost.
    Customizing for the company code - Configure How Unplanned Delivery Costs Are Posted - is set as "Distribute among invoice items".
    When we try to post an LIV in regard to the aforesaid scenario [Tax code is with 0% tax], the system returns the following error message:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Balance is not equal to zero: 58.42 EUR
        Message no. M8186
    Diagnosis
        You cannot post the document as the balance is 58.42 EUR.
    Procedure
        Check the gross invoice amount, the tax amount, the amounts in the items
        selected and any unplanned delivery costs in the document header. The
        items selected on the item list may not be the same as those in the
        invoice.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Also, went through the OSS note 129066 which mentions that Unplanned delivery costs cannot be distributed to the planned delivery costs as of SAP release 4.6C.
    Our system is SAP 4.7 and hence we are unable to understand the reason for this error..
    Is there any enhancement relevant in this regard?
    Can anyone please throw some light on this.
    Best Regards,
    Bhargav

    Thank you for contacting SAP Global Support Center.
    It seems you're posting the planned and unplanned delivery cost
    simultaneously.
    The planned delivery cost and unplanned delivery cost cannot be invoicedtogether when only freight cost is being invoiced.
    Unplanned delivery cost and planned delivery cost can be invoiced
    together only when you invoice both goods and freight cost.
    This is the standard design of the system. Even in customizing for
    unplanned delivery cost, the system behavior is designed such a way thatit can be invoiced along with goods only. Both options which we have
    given behave similarly except for the posting to account.
    Therefore, your system behavior is as per standard design and there
    is no error in your system. For this functionality there are no other
    workarounds too.
    Additionally, Please consider if the workaround below is working.
    In order to post unplanned delivery costs with planned delivery costs
    the customizing has to be set so that the unplanned delivery costs are
    posted to a seperate G/L account rather than distributed amongs line
    items.
    SPRO
    >>Materials Management
    >>Logistics Invoice Verification
    >>Incoming Invoice
    >>Configure How Unplanned Delivery Costs Are Posted
    "2" Different G/L line
    May I ask you to review note 129066. The the validity is from 4.0 to
    4.6 C but it is valid for your release also.

  • Account determination for customer account with ZERO value

    Hi Friends,
    My clint requirement is to sell product free of cost to customer but per accounting purpose taxes need to be calculated.Any possible solution guide us per acheving this challenge.
    Accounting needs to be trigger like below
    DR.customer     $0.00
    DR Free of charge account      $100.00
    CR. output vat 18%                   $18
    CR EXCISE DUTY  12%(IF APPLICABLE)  0.00
    CR un relized revenue                         $82.00
    Thanks in advance
    Srinivasa

    Hi,
    If your configuration is correct, an accounting document will get created during invoice creation even if the value is zero. Acct doc is created not based on the value, but based on the account key to which the condition type is linked.
    Generally in free goods, there will be net price (gross price- discounts). You can link this netprice condition type to an account key. The netprice will anyway be nullified by NB00 condition type which is applicable for free goods pricing. You can also link NB00 to another account key.
    Now the values will nullify each other in invoice. Similarly the values will be nullified in accountnig doc also and they can be posted to any GL account you wish.

  • Delivery Costs into SO

    Hi all,
    I have below scenario.
    Let's say i have a material X, this material X which will be procured through Purchase Order (PO). The delivery costs for this material until our warehouse will be issued with another PO. So, in short, we will use 2 POs until this material is completely procured into our warehouse.
    This material X will be used in 2 scenarios:
    1. It will be used in production order
    2. It will be sold to customer through SO
    If the delivery cost is received into cost center, how can we include the costs into production order or SO?
    For Production Order, i am thinking of using manual cost allocation instead of costing sheet, because only 1-2% of the material X will be treated this way.
    I have no idea how to include this delivery cost into SO (not the delivery cost to customer, but the one into our warehouse) if the SO is not a cost object..
    Please kindly suggest, any help is greatly appreciated...
    Regards, Erwin

    Hi,
    I see, then i have to use assessment from cost center to COPA value field, while asking the SD guy to maintain a statistical condition type which should consist of estimated value, right?
    But why should it be after billing was done?
    what if the delivery cost is already known at the time of SO creation?
    Because in the 2nd case of that material X, it is already in our warehouse, waiting to be sold..
    But, that kinda makes sense, since not all SO can 100% be processed to billing...
    Thank you
    Regards, Erwin
    Edited by: Erwin Hartono on Nov 1, 2010 3:25 PM
    Edited by: Erwin Hartono on Nov 1, 2010 3:26 PM

  • Delivery Costs - Closing

    Hello,
    We have a PO with goods received and Invoice posted.
    Among the delivery costs - we have Insurance, Customs, and Freight conditions.
    The user accidentally has already paid the delivery costs for Customs & Freight through some other invoce. When he tries to create the invoice for the delivery costs ( as Insurance is still to be invoiced) all the delivery costs show up in MIRO screen. Is there a way that I can close the Customs & Freight delivery costs.
    Any help is appreciated.
    Thanks,
    Vish

    Hi
    Check with your FI consultant for feasibility of below solution:
    Reset the payment made to delivery vendors using FBRA (if paid already to vendors) and cancel the planned delivery cost invoices posted on three purchase orders (you said these are adjustments - means there should be some problem for clearing the invoice). Post invoices correctly for 6 purchase orders now with correct amount. Now clear these invoice open items with payment document (which is now open because of reset through FBRA). Then all the purchase orders are updated correctly with invoice amounts.
    I dont think you can cancel planned delivery costs on purchase order (reversal of GR is not possible only for delivery costs)
    Thanks

Maybe you are looking for

  • How can I create a new format in pages?

    Basically this comes from trying to change the vertical indentation on pages. (Like you can change the horizontal, you know? I just wanted to make the text field smaller on all sides. Incidentally, if you know how to do a vertical indentation change,

  • In my BlackBerry Curve 8520 any applicatio​n is not working

    Hello.. My name is Hamza Qureshi. I am using blackberry curve 8520. My service provider is Airtel Prepaid.I am facing some problems when i am using 2g plan in my curve 8520 then except browser not a single application is not working like (whatapp, we

  • How to add title/caption to each image in Bridge web gallery

    Hi, I am creating a web gallery within Bridge and I want to add a title and caption to each image in my web gallery. How do I do that? The only thing I see is the Site Info. section and that adds a title and caption to the entire web gallery (includi

  • Hp photosmart b110 fails, status says error-prin​ting.

    1. HP Photosmart e-printer B110 2. Windows Vista 3. "Error-printing" in printer status 4. No changes have been made Please help me! When I try to print it fails and the status says error-printing. It also does not work when I e-mail the printer. Both

  • Passed activation day and no broadband!

    I have been led to believe that yesterday the broadband I had orderd would be active, its not!  I odered my phone line on the first   of March and it was installed last week (three months later). I have always been a cable customer and I sort of expe