Costing enabled check in oracle inventory

Hi,
While defining inventory master item, in costing tab, Costing enabled and inventory asset value enabled tab cannot be saved when checked.
I m click enable and then try to save the master item it does not take any effect and ultimately I'm having to close the item without saving
Please suggest the problem and possible solution.
Regards,
Muhammad Nouman Shaikh

Hi,
Check if there is any "form personalization" applied to the item master form.
if yes, disable the same and try again.
Thanks
-Arif.

Similar Messages

Patching 10gr2 RAC, Oracle inventory on a CFS

I have 4-node HP-UX VCS5 Oracle10g RAC setup running in production environment. First time i am trying to apply latest patch bundle. I am trying to apply 10.2.0.4 patch set.
I am getting the bellow error when i am applying the patch.
"Central Invventory can't be shared, this is not supported"
The ORACLE_BASE is on a cluster file system.
To ignore this error and to proceed with patch installation, what steps we need to take ?
Thank you.

Hi,
Looks like you have run into an always documented restriction which has now been enforced with the OUI in the 10.2.0.4 patchset.
The documentation which mentioned that Shared Central Inventories are not recommended / supported is available at :
http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/oui6_cluster_environment.htm#BABGJAAF
<Quote>
The Oracle Inventory directory (oraInventory) stores an inventory of all software installed on the system. It is required by, and shared by, all Oracle software installations on a single system. The first time you install Oracle software on a system, Oracle Universal Installer prompts you to specify the path to this directory. If you are installing the software on a local file system, then Oracle recommends that you choose the following path:
oracle_base/oraInventory
If the Oracle base directory is on a cluster file system, or on an NFS file system on a NAS device, then you must specify a path for the Oracle Inventory directory on a local file system. The Oracle base directory must be on a local file system to enable all of the nodes to have separate inventories.
Oracle Universal Installer creates the directory that you specify, and sets the correct owner, group, and permissions for it. You do not need to create it.
<un-quote>
What has changed with the 10.2.0.4 Installer is that Oracle now enforces this restriction. What I believe is that without this being enforced , there was a possibility of running into Central Inventory corruption issues when Clustered and Non-Clustered installs were being done on the same node.
I also found this discussion on one of the Metalink threads which might be useful.
Please contact Oracle Support prior to attempting these steps though.
Quoting Oracle:
It is not supported to have central inventory on a shared location. There was a bug.5009954 "OUI SHOULD ENFORCE SEPARATE CENTRAL INVENTORY LOCATIONS IN RAC" filled on this issue. This bug is fixed in 11.2. It is actually an OUI issue which doesn't perform a check to make sure that central inventory location is not on shared device.
In order to fix the inventory, you can change the OH/oraInst.loc in the CRS home to point to a non-shared directory.
Run <crs>/oui/bin/attachhome.sh -silent -local -cfs CRS=true -invPtrLoc <crs>/oraInst.loc on each of the nodes. Finally copy the oraInst.loc to the /etc/oraInst.loc.
Vishwa

Unable to find product oracle.swd.jre[1.4.1, 9.9.9.] in Oracle Inventory

I am trying to install Oracle 10g on Solaris 10 (SPARC) using the OUI and receive the following error towards the beginning of the install.
unable to find product oracle.swd.jre[1.4.1, 9.9.9.] in Oracle Inventory
Please respond if you have encountered this error and what you did to resolve it.
Thanks

Of course, thoroughly. Ok. Like I said, it surprising how often people don't check that, so we always ask first.
Have you run into this error,
or a similar one, before? No. Have installed 9.2 on several Solaris boxes without a problem, so have not directly seen this one.
Do you have an applicable
troubleshooting tips? I searched MetaLink on "unable to find product oracle.swd.jre" and got three hits. None are exactly your situation, but they might lead you to something. See notes 468150.1, 315842.1, and 397745.1.
And this may be one requireing an SR.
I suspect that the JRE
location is not set properly. I

Check "Problem: Oracle Database 10g Release 2 can only be installed in new

Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
Gagan

I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid

Query Related to Oracle Inventory

I have to prepare a report in Oracle Inventory (R12) where I have to extract below fields
1. Inventory Quantity Sold for previous days and weekly basis etc
2. Quantity Physically on a shelf at a distribution center but commited to end customer
3. Quantity transfeerd from one or more distribution center within distributor
4. Quantity on order with manufacturer but not yet received
5.Quantity Intransit (Intercompany Transfer to the location)
But I am unable to derive those fields. Please help me to build the query to fetch those fields.

should I remove those PGA configuration and make it manually for sort_area,hash_join and workarea policy?Well, it depends on your database.
First, check statspack/awr and see if you are doing "disk sorts", and check your ratio of nested loop joins to hash joins:
http://www.dba-oracle.com/t_viewing_cpu_ram_io_costs.htm
Manual setting "alter session" commands, is, well, manual, and it would be best to let Oracle take care of it, IMHO.
Hope this helps. . .
Don Burleson
Oracle Press author

Failure at final check of Oracle CRS stack.10 on the second node

Hi,
I am trying to install Oracle Clusterware 10.2.0.1.0 in VM machines (2 nodes config) in Linux (OEL5) using VMware Server (2.0). Everything went very well one the first node upto running the root.sh. Running root.sh ended with Failure at final check of Oracle CRS stack 10 error.
RAC1 root.sh output
[root@rac1 crs]# ./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/raw/raw2
Format of 1 voting devices complete.
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
rac1
CSS is inactive on these nodes.
rac2
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
[root@rac1 crs]#
RAC2 root.sh output
[root@rac2 crs]# ./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/raw/raw2
Format of 1 voting devices complete.
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
[root@rac2 crs]#
Output of alterrac2.log
[root@rac2 rac2]# more alertrac2.log
2009-08-14 23:02:44.699
[client(5935)]CRS-1006:The OCR location /dev/raw/raw1 is inaccessible. Details in /u01/crs/oracle/product/10.2.
0/crs/log/rac2/client/ocrconfig_5935.log.
2009-08-14 23:02:44.704
[client(5935)]CRS-1006:The OCR location /dev/raw/raw1 is inaccessible. Details in /u01/crs/oracle/product/10.2.
0/crs/log/rac2/client/ocrconfig_5935.log.
2009-08-14 23:02:44.707
[client(5935)]CRS-1006:The OCR location /dev/raw/raw1 is inaccessible. Details in /u01/crs/oracle/product/10.2.
0/crs/log/rac2/client/ocrconfig_5935.log.
2009-08-14 23:02:44.864
[client(5935)]CRS-1001:The OCR was formatted using version 2.
2009-08-14 23:02:50.339
[client(6004)]CRS-1801:Cluster crs configured with nodes rac1 rac2 .
2009-08-14 23:05:07.603
[cssd(6600)]CRS-1605:CSSD voting file is online: /dev/raw/raw2. Details in /u01/crs/oracle/product/10.2.0/crs/l
og/rac2/cssd/ocssd.log.
[root@rac2 rac2]#
Since raw devices are not supported from OEL5, I did do the workaround in *63-oracle-raw.rules file under /etc/udev/rules.d* dir.
ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sdc1", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", KERNEL=="sdd1", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", KERNEL=="sde1", RUN+="/bin/raw /dev/raw/raw4 %N"
ACTION=="add", KERNEL=="sdf1", RUN+="/bin/raw /dev/raw/raw5 %N"
KERNEL=="raw[1-2]*", OWNER="root", GROUP="oinstall", MODE="640"
KERNEL=="raw[3-5]*", OWNER="oracle", GROUP="oinstall", MODE="640"
One thing I have noticed after running root.sh on both the nodes is the permissons on raw devices changed from
Before root.sh
[root@rac2 crs]# ls -ls /dev/raw*
0 crw------- 1 root root 162, 0 Aug 14 22:42 /dev/rawctl
/dev/raw:
total 0
0 crw-r----- 1 root oinstall 162, 1 Aug 14 22:42 raw1
0 crw-r----- 1 root oinstall 162, 2 Aug 14 22:42 raw2
0 crw-r----- 1 oracle oinstall 162, 3 Aug 14 22:42 raw3
0 crw-r----- 1 oracle oinstall 162, 4 Aug 14 22:42 raw4
0 crw-r----- 1 oracle oinstall 162, 5 Aug 14 22:42 raw5
to
[root@rac2 crs]# ls -ls /dev/raw*
0 crw------- 1 root root 162, 0 Aug 14 22:31 /dev/rawctl
/dev/raw:
total 0
0 crw-r----- 1 root oinstall 162, 1 Aug 14 22:56 raw1
0 crw-r--r-- 1 oracle oinstall 162, 2 Aug 14 23:01 raw2
0 crw-r----- 1 oracle oinstall 162, 3 Aug 14 22:31 raw3
0 crw-r----- 1 oracle oinstall 162, 4 Aug 14 22:31 raw4
0 crw-r----- 1 oracle oinstall 162, 5 Aug 14 22:31 raw5
[root@rac1 crs]#
My shared disk listing
[root@www shared]# ls -ltr
total 8780
-rw------- 1 root root 640 Aug 14 22:43 votingdisk.vmdk
-rw------- 1 root root 598 Aug 14 22:43 ocr.vmdk
-rw------- 1 root root 604 Aug 14 22:43 asm3.vmdk
-rw------- 1 root root 604 Aug 14 22:43 asm2.vmdk
-rw------- 1 root root 604 Aug 14 22:43 asm1.vmdk
-rw------- 1 root root 65536 Aug 14 22:44 votingdisk-s006.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 votingdisk-s005.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 votingdisk-s004.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 votingdisk-s003.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 votingdisk-s002.vmdk
-rw------- 1 root root 393216 Aug 14 22:44 votingdisk-s001.vmdk
-rw------- 1 root root 65536 Aug 14 22:44 ocr-s006.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 ocr-s005.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 ocr-s004.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 ocr-s003.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 ocr-s002.vmdk
-rw------- 1 root root 393216 Aug 14 22:44 ocr-s001.vmdk
-rw------- 1 root root 65536 Aug 14 22:44 asm3-s006.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm3-s005.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm3-s004.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm3-s003.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm3-s002.vmdk
-rw------- 1 root root 393216 Aug 14 22:44 asm3-s001.vmdk
-rw------- 1 root root 65536 Aug 14 22:44 asm2-s006.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm2-s005.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm2-s004.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm2-s003.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm2-s002.vmdk
-rw------- 1 root root 393216 Aug 14 22:44 asm2-s001.vmdk
-rw------- 1 root root 65536 Aug 14 22:44 asm1-s006.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm1-s005.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm1-s004.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm1-s003.vmdk
-rw------- 1 root root 327680 Aug 14 22:44 asm1-s002.vmdk
-rw------- 1 root root 393216 Aug 14 22:44 asm1-s001.vmdk
[root@www shared]#
I don't know how to fix this problem. I did go through many docs and metalink notes.
I am new to RAC world. It took 3 days to come to this stage. Please help me.
Thanks
Leo

Hi Surachart,
Here is my messages output..
*/var/log/messages*
Aug 20 14:05:01 rac2 avahi-daemon[3627]: Registering new address record for fe80::20c:29ff:fe6b:f9a8 on eth1.
Aug 20 14:05:01 rac2 avahi-daemon[3627]: Registering new address record for 192.168.1.196 on eth1.
Aug 20 14:05:01 rac2 avahi-daemon[3627]: Registering new address record for fe80::20c:29ff:fe6b:f99e on eth0.
Aug 20 14:05:01 rac2 avahi-daemon[3627]: Registering new address record for 192.168.0.196 on eth0.
Aug 20 14:05:01 rac2 avahi-daemon[3627]: Registering HINFO record with values 'I686'/'LINUX'.
Aug 20 14:05:02 rac2 avahi-daemon[3627]: Server startup complete. Host name is rac2.local. Local service cookie is 927471131.
Aug 20 14:05:03 rac2 avahi-daemon[3627]: Service "SFTP File Transfer on rac2" (/services/sftp-ssh.service) successfully established.
Aug 20 14:05:08 rac2 smartd[3739]: smartd version 5.38 [i686-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Aug 20 14:05:08 rac2 smartd[3739]: Home page is http://smartmontools.sourceforge.net/
Aug 20 14:05:08 rac2 smartd[3739]: Opened configuration file /etc/smartd.conf
Aug 20 14:05:08 rac2 smartd[3739]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/hdc, opened
Aug 20 14:05:08 rac2 kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Aug 20 14:05:08 rac2 kernel: hdc: drive_cmd: error=0x04 { AbortedCommand }
Aug 20 14:05:08 rac2 kernel: ide: failed opcode was: 0xec
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/hdc, not ATA, no IDENTIFY DEVICE Structure
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sda, opened
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sda, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sda' to turn on SMART features
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sdb, opened
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sdb, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sdb' to turn on SMART features
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sdc, opened
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sdc, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sdc' to turn on SMART features
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sdd, opened
Aug 20 14:05:08 rac2 smartd[3739]: Device: /dev/sdd, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sdd' to turn on SMART features
Aug 20 14:05:09 rac2 smartd[3739]: Device: /dev/sde, opened
Aug 20 14:05:09 rac2 smartd[3739]: Device: /dev/sde, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sde' to turn on SMART features
Aug 20 14:05:10 rac2 smartd[3739]: Device: /dev/sdf, opened
Aug 20 14:05:10 rac2 smartd[3739]: Device: /dev/sdf, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sdf' to turn on SMART features
Aug 20 14:05:10 rac2 smartd[3739]: Monitoring 0 ATA and 0 SCSI devices
Aug 20 14:05:10 rac2 smartd[3741]: smartd has fork()ed into background mode. New PID=3741.
Aug 20 14:05:13 rac2 pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found
Aug 20 14:05:13 rac2 last message repeated 3 times
Aug 20 14:05:27 rac2 gconfd (root-3967): starting (version 2.14.0), pid 3967 user 'root'
Aug 20 14:05:27 rac2 gconfd (root-3967): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Aug 20 14:05:27 rac2 gconfd (root-3967): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Aug 20 14:05:27 rac2 gconfd (root-3967): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Aug 20 14:05:29 rac2 gconfd (root-3967): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Aug 20 14:05:29 rac2 hald: mounted /dev/hdc on behalf of uid 0
Aug 20 14:05:29 rac2 hcid[3311]: Default passkey agent (:1.8, /org/bluez/applet) registered
Aug 20 14:05:31 rac2 nm-system-settings: Loaded plugin ifcfg-rh: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Aug 20 14:05:31 rac2 nm-system-settings: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-eth1 ...
Aug 20 14:05:31 rac2 nm-system-settings: ifcfg-rh: read connection 'System eth1'
Aug 20 14:05:31 rac2 nm-system-settings: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
Aug 20 14:05:31 rac2 nm-system-settings: ifcfg-rh: error: Ignoring loopback device config.
Aug 20 14:05:31 rac2 nm-system-settings: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ...
Aug 20 14:05:31 rac2 nm-system-settings: ifcfg-rh: read connection 'System eth0'
Aug 20 14:05:31 rac2 pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found
Aug 20 14:05:32 rac2 last message repeated 4 times
Aug 20 14:12:51 rac2 kernel: FS-Cache: Loaded
Aug 20 14:22:06 rac2 xinetd[3488]: START: shell pid=5193 from=192.168.0.195
Aug 20 14:22:06 rac2 xinetd[3488]: EXIT: shell status=0 pid=5193 duration=0(sec)
Aug 20 14:22:07 rac2 xinetd[3488]: START: shell pid=5217 from=192.168.0.195
Aug 20 14:22:07 rac2 xinetd[3488]: EXIT: shell status=0 pid=5217 duration=0(sec)
Aug 20 14:22:07 rac2 xinetd[3488]: START: shell pid=5241 from=192.168.0.195
Aug 20 14:22:07 rac2 xinetd[3488]: EXIT: shell status=0 pid=5241 duration=0(sec)
Aug 20 14:22:16 rac2 xinetd[3488]: EXIT: shell status=0 pid=6236 duration=0(sec)
Aug 20 14:22:16 rac2 xinetd[3488]: START: shell pid=6265 from=192.168.0.195
Aug 20 14:22:16 rac2 xinetd[3488]: EXIT: shell status=0 pid=6265 duration=0(sec)
Aug 20 14:22:16 rac2 xinetd[3488]: START: shell pid=6291 from=192.168.0.195
Aug 20 14:22:17 rac2 xinetd[3488]: EXIT: shell status=0 pid=6291 duration=1(sec)
Aug 20 14:22:17 rac2 xinetd[3488]: START: shell pid=6317 from=192.168.0.195
Aug 20 14:22:17 rac2 xinetd[3488]: EXIT: shell status=0 pid=6317 duration=0(sec)
[root@rac2 log]#

Corruption of Oracle Inventory by installing ADF runtime libraries?

Hi,
We are running OAS 10.1.2.2.0 on RedHat Enterprise Linux and I am deploying an ADF application from JDev 10.1.3.39.84.
I downloaded the standalone installer for the adf runtime libraries installer from here:
http://download.oracle.com/otn/java/jdeveloper/10132/extensions/adfinstaller.zip
and installed it to our development server. I then deployed the ADF application and it seems to work just fine.
Now I have requested that these libraries be installed to the production server but the Sys Admin has informed me that:
"Your installation appears to have corrupted the 'Oracle Inventory' on the development server. This can affect upgrades, patching, etc."
I have been asked to investigate if this is a known issue and what possible resolutions there might be for preserving/restoring the Oracle Inventory to enable continued maintenance of the servers.
I have searched the forums and Metalink without success, so I am posting this query to see if anyone else can help me point me in the right direction.
Thanks for any assistance.

Hi,
please file a service request with customer support. This way you have an analyst working with you to track down the issue. Because ADF libraries are copying jar files only and this is nothing you can re-do after wards, I would be surprised if it has anything to do with the Oracle inventory. However still it would be good to have customer support looking at this
Frank

Order checking via Oracle Wireless

Dear all;
I was wondering is it possible to perform order checking thru Oracle 9i Wireless Application. I am currently in a project trying to develop a mobile application that can directly integrate with Oracle 11i E-Business Suite, eg: for order checking, inventory status, credit limit, etc.
Please help. Would appreciate if u can direct me to where i cane get more technical information regarding this possibilities.
thank;
andrew, Malaysia

Hi,
Did you change the TNSNAMES.ORA file for DS? you have to add TNS entry to DS TNSNAMES.ORA file.
Go to $DB_Default_Home$\netword\admin and open TNSNAMES.ORA file in notepad. Copy the tns entry from which you are connecting from SQL*plus.
Go to $DS_Default_Home$\netword\admin and open TNSNAMES.ORA file in notepad. paste the tns entry you copied.
Now try to connect from form builder.
regards,
Qasim Javaid

How do I check the oracle client version?

Hi All,
     How do I check the oracle client version installed from the OS level. I do know my database version I need to check which client is being used. Is there a table where this information is stored.
Thanks
Shabna

disp+work.exe -V will tell you which OCI version was used during compiling and linking.
Oracle uses release independent DLL Names (Unix people would say Shared Libraries) and therefore the SAP Kernel will dynamically load any Oracle Client Version found in the standard DLL Load Path during startup.
If you have more versions installed on your computer and you are not shure which one is loaded you can use Process Explorer (freeware, see www.sysinternals.com) to find out which one is loaded. If they belong to an Oracle_home (up to release 9.2) refere to Oracle Universal Installers Inventory information in order to find out which exact version is used.
If an Oracle10 Instant Client is used, there is no corresponding Oracle_Home. In this case you can use Windows Explorer (right click on the DLL -for example oci.dll), select properties, the Version Tab and File Version).
But unfortunately Oracle is not updating the File Version every time they are patching something.
An SAP ABAP Server Integrated Resource is the version information disp+work.exe -V is listing (evquivalent to SM51 - Release Information).
<b>Datenbank Client Library : OCI_10201_SHARE (10.2.0.2.0)</b>
OCI_10201_SHARE is telling us the compile/link environment, the number in brackets (only available starting with Oracle10) tells us the the result of an Oracle Client GetVersion call. Unfortunately this one does also not reflect the installed Minipatch version up to now.
Here are some results on 10.2.0.2 Windows X86_64:
SM51: Datenbank Client Library : OCI_10201_SHARE (10.2.0.2.0)
Explorer (OCI.DLL located in the same directory as disp+work.exe):
   10.2.0.2.0 Patch2
Explorer (oraociicus10.dll - the instant client implementation, this version is the one actual since mini patch 10.2.0.2.5 and it was definitely changed in 10.2.0.2.5):
   OraOCIICUS10.dll - 10.2.0.1.0
   oracore10.dll - 10.2.0.1.0 Production
   oranls10.dll - 10.2.0.1.0 Production
   orasnls10.dll - 10.2.0.1.0 Production
   oraunls10.dll - 10.2.0.1.0 Production
   oravsn10.dll - 10.2.0.1.0 Production
   oracommon10.dll - 10.2.0.1.0 Patch1
   orageneric10.dll - 10.2.0.2.0 Patch2
   oraclient10.dll - 10.2.0.2.0 Patch2
   orapls10.dll - 10.2.0.1.0 Patch1
   orasql10.dll - 10.2.0.1.0 Production
   oraxml10.dll - 10.1.0.2.0
   orahasgen10.dll - 10.2.0.1.0 Production
   oraocrutl10.dll - 10.2.0.1.0 Production
   oraocr10.dll - 10.2.0.1.0 Production
   oraocrb10.dll - 10.2.0.1.0 Production
   oranbeq10.dll - 10.2.0.1.0 Production
   orantcp10.dll - 10.2.0.1.0 Production
oracommon10.dll from the rdbms server does report 10.2.0.2.0 Patch5 at the same time. compare it with the version information of oracommon10.dll included in oraociicus10.dll. Both patches are included in the same patchset (10.2.0.2.5).
there are two possible conclusions about this:
1. the version infomation is not very reliable.
2. the Oracle Patch and Build environment is not very reliable
Peter

ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormD

JDev version : 11.1.1.4
WLS : 10.3.4
Hi All,
Recently we have migrated JDev from 11.1.1.3 to 11.1.1.4 and WLS from 10.3.3 to 10.3.4. We had security enabled in our application and use to work without any issues in our previous version (before migration). We are getting below error after migration and not able to access our application.
Error 500--Internal Server Error
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormDef@d856cd' 'VIEW'.We get this exception as soon as log in is successful. We have tried with different users including administrator who has complete permissions but got same exception. Note that same application is working in previous version.
Please help us in resolving this issue. Below I have mentioned complete stack trace.
More details:
Policy store : jaxz-data.xml
Identity store : integrated WLS LDAP
WLS : standalone WLS
Error 500--Internal Server Error
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormDef@d856cd' 'VIEW'.
at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:180)
at oracle.adf.controller.internal.security.AuthorizationEnforcer.internalCheckPermission(AuthorizationEnforcer.java:160)
at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:114)
at oracle.adfinternal.controller.state.ControllerState.checkPermission(ControllerState.java:632)
at oracle.adfinternal.controller.state.ControllerState.initializeUrl(ControllerState.java:669)
at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart2(ControllerState.java:447)
at oracle.adfinternal.controller.application.SyncNavigationStateListener.afterPhase(SyncNavigationStateListener.java:46)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:531)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:168)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchAfterPagePhaseEvent(ADFPhaseListener.java:124)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:70)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:398)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)Thanks,
Ravindra

What we observed is that non of our application security policies are getting migrated to system-jazn-data.xml file during deployment. This was working in previous version.
weblogic-application.xml file contents:
<?xml version = '1.0' encoding = 'windows-1252'?>
<weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
<xml>
    <parser-factory>
      <saxparser-factory>oracle.xml.jaxp.JXSAXParserFactory</saxparser-factory>
      <document-builder-factory>oracle.xml.jaxp.JXDocumentBuilderFactory</document-builder-factory>
      <transformer-factory>oracle.xml.jaxp.JXSAXTransformerFactory</transformer-factory>
    </parser-factory>
</xml>
<application-param>
    <param-name>jps.credstore.migration</param-name>
    <param-value>OVERWRITE</param-value>
</application-param>
<application-param>
    <param-name>jps.policystore.migration</param-name>
    <param-value>OVERWRITE</param-value>
</application-param>
<listener>
      <listener-class>oracle.communications.brm.pdc.server.common.PricingApplicationLifeCycleListener</listener-class>
</listener>
<listener>
    <listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
</listener>
<listener>
    <listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
</listener>
<listener>
    <listener-class>oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener</listener-class>
</listener>
<listener>
    <listener-class>oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener</listener-class>
</listener>
<library-ref>
    <library-name>adf.oracle.domain</library-name>
</library-ref>
<library-ref>
    <library-name>oracle.jsp.next</library-name>
</library-ref>
</weblogic-application>

ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormDef

JDev version : 11.1.1.4
WLS : 10.3.4
Hi All,
Recently we have migrated JDev from 11.1.1.3 to 11.1.1.4 and WLS from 10.3.3 to 10.3.4. We had security enabled in our application and use to work without any issues in our previous version (before migration). We are getting below error after migration and not able to access our application.
Error 500--Internal Server Error
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormDef@d856cd' 'VIEW'.
We get this exception as soon as log in is successful. We have tried with different users including administrator who has complete permissions but got same exception. Note that same application is working in previous version.
Please help us in resolving this issue. Below I have mentioned complete stack trace.
More details:
Policy store : jaxz-data.xml
Identity store : integrated WLS LDAP
WLS : standalone WLS
Error 500--Internal Server Error
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormDef@d856cd' 'VIEW'.
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:180)
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.internalCheckPermission(AuthorizationEnforcer.java:160)
     at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:114)
     at oracle.adfinternal.controller.state.ControllerState.checkPermission(ControllerState.java:632)
     at oracle.adfinternal.controller.state.ControllerState.initializeUrl(ControllerState.java:669)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart2(ControllerState.java:447)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.afterPhase(SyncNavigationStateListener.java:46)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:531)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:168)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchAfterPagePhaseEvent(ADFPhaseListener.java:124)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:70)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:398)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

Usually, the security policy of the application is bundled in the EAR file. When you deploy the application the security policy is automatically migrated (e.g. added) to domain's security policy repository (e.g. <tt>system-jazn-data.xml</tt> file, if neither LDAP or DB repository is used). Also when you undeploy an application its security policy is removed from domain's security policy repository.
My practical experience says that both of these happen only if the application has been targetted to WLS domain's admin server (i.e. if the application is targetted only to managed servers but not to the admin server, then the security policy is neither migrated nor removed).
The trick I apply is to do the following:
(1) Target and deploy the application to the admin server (so the security policy is migrated into <tt>system-jazn-data.xml</tt>);
(2) Copy the migrated application's policy section from <tt>system-jazn-data.xml</tt> to the clipboard;
(3) Undeploy the application from the admin server (the security policy is removed from <tt>system-jazn-data.xml</tt> in result);
(4) Paste the security section back into <tt>system-jazn-data.xml</tt> file and save it;
(5) Deploy the application to managed servers;
(6) Restart the servers.
(It is not necessary to undeploy the application at step 3, it is enough to remove the admin server from application's targets).
I am not sure that this is the right approach, but it works and I have not found anything in the documentation about this topic.
One more thing - the automatic migration of the security policy that is included in the EAR is controlled by the following parameter in <tt>weblogic-application.xml</tt> file:
<application-param>
    <param-name>jps.policystore.migration</param-name>
    <param-value>OVERWRITE</param-value>
</application-param>The policy is not migrated if this parameter is not set.
If you deploy the application from JDeveloper, it will not be necessary to set this parameter in <tt>weblogic-application.xml</tt> manually because JDeveloper will do it for you. Just open the Application Properties dialog in JDev, go to page "Deployment" and check the checkbox "Application Policies". Then JDeveloper will automatically add this parameter into <tt>weblogic-application.xml</tt> file within the EAR files generated from this time onwards (do not be confused that it will not be added to the file in the IDE).
Dimitar

'unable to find product oracle.swd.jre[1.3.1,1.6] in Oracle Inventory'

Hi All,
i am running the runInstaller for patch set 9.2.0.8 on AIX 5L Based Systems (64-Bit)
after selecting the products.xml file and selecting the oracle home to update and then cllick Install
i get the error 'unable to find product oracle.swd.jre[1.3.1,1.6] in Oracle Inventory'
is it the issue of the version of oracle.swd.jre? can we skip the installation of this componenet?
Kindly suggest
Thanks
SK

Hi,
Please see if these documents help.
Note: 397745.1 - Error when installing Patch 2376472: "Unable to find product oracle.swd.jre "
Note: 315842.1 - 'unable to find product oracle.swd.jre' Error During Agent Upgrade from 10.1.0.3 to 10.1.0.4
Regards,
Hussein

Unable to find product oracle.swd.jre[1.1.6, 1.1.7.27] in oracle inventory

while installing workflow server 2.6 I got an error saying that "unable to find product oracle.swd.jre[1.1.6, 1.1.7.27] in oracle inventory"
I tried installing it using oracle universal installer 2.2 but still it is giving the same error as above.
so please help me.

Thanks Allison for your help.
I am installing wf server on windows 2000
The other products installed in the same ORACLE_HOME are Oracle database 9i version 9.2.0.1.0
I am not using any CD, but I have downloaded it from web and have the licence to use the software.
I hope you can help me
Janak

Item import to oracle inventory from legacy system

Hi,
We have a requirement where we need to import a very large number of items (close to 500,000) from a legacy system to oracle inventory.
We are using oracle open interface for this. We have designed a temp table for this purpose in order to validate data before moving it to the oracle interface tables. The data to be migrated is present in a separate data base and we need to move this data to Oracle temp table.
Can we use DB link to migrate this kind of data(in terms of volume)? Also what are the best practices that need to be followed while importing data to Oracle inventory? Is there any other way that this can be done?
Please share your thoughts and suggestions on this
Thanks
AM

Hi,
Some times DB link will fail, Please create custom package and try to interface with legacy system for periodically fetching the data into your tables. If the data is bulk please use API instead of Interface tables.
Thanks.

Enabling SSL for Oracle Enterprise Manager 10.1.3.1 is Failing!!!

Hi All,
I have followed the steps described in
http://download-uk.oracle.com/docs/cd/B31017_01//core.1013/b28940/em_app.htm#BABCEEAH.
However when I am trying to start the application server using 'opmnctl startall' the server is not starting and some timeout is getting generated in the log file.
Is it that enabling SSL will only make the EM console secured? Then how to enable SSL for other soa components like - BPEL,ESB,OWSM? Are there any documentations available?
Also please let me know how can I enable SSL for Oracle Application server console?
Please any advice will be appreciated. I am in the middle of a project delivery.
Thanks

Hi,
Let me first highlight the installation that I have done. I have installed SOA components with 'basic installation' mode.
The log file under <ORACLE_SOA_HOME>/opmn/config/ has generated the following stack:-
08/07/25 11:03:34 Start process
08/07/25 11:03:37 WARNING: XMLApplicationServerConfig.overwriteSiteConfigPort Port assignment is ignored: web-site not found in the server OC4JServiceInfo id: default-web-site protocol: http hostname: null port: 8890 description: null
08/07/25 11:03:37 WARNING: XMLApplicationServerConfig.overwriteSiteConfigPort Port assignment is ignored: web-site not found in the server OC4JServiceInfo id: secure-web-site protocol: https hostname: null port: 1156 description: null
08/07/25 11:03:47 log4j:WARN No appenders could be found for logger (wsif).
08/07/25 11:03:47 log4j:WARN Please initialize the log4j system properly.
08/07/25 11:03:53 WARNING: OC4J Service: ascontrol-web-site with protocol: https and port: 1156 was not declared in opmn.xml
08/07/25 11:03:53 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
08/07/25 11:03:53 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: default-web-site protocol: http hostname: null port: 8890 description: null
08/07/25 11:03:53 default-web-site hostname was null
08/07/25 11:03:53 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: secure-web-site protocol: https hostname: null port: 1156 description: null
08/07/25 11:03:53 secure-web-site hostname was null
On the command prompt I am getting the following error:-
opmn id=CALTP8BB32:6203
0 of 1 processes started.
ias-instance id=home.CALTP8BB32.cts.com
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=301928631,pid=2944)
failed to start a managed process after the maximum retry limit
Log:
D:\product\SOASuite\opmn\logs\\default_group~home~default_group~1.log
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:home | N/A | Down
ASG | ASG | N/A | Down
Please let me know where am I going wrong?
Thanks,
Mandrita.

Costing enabled check in oracle inventory

Similar Messages

Maybe you are looking for