Costing for Maintenance- and Service Orders

hi
Can any one tell me the Configuration steps for Costing for Maintenance- and Service Orders.
Kindly please guide me.
regards,
R.Ramakrishnaraj

Hi,
Please go through below mentioned threads.
Re: Activity Costing
Re: PM order costing.
Re: Planned cost not getting displayed in Maintenance Order
Re: Costs not appearing in service order
There are many threads available for Costing. Please search in the threads.
Regards,
Maheswaran.

Similar Messages

  • SAME LAYOUT with different heading for invoice and service order invoice

    Hi,
    I need to use the same layout for printing both invoice and service order invoice. The layout should print the same data except the title should be changed accordingly ( invoice or service order invoice).
    Please help me with this
    Regards,
    Anik

    Hi,
    It is not clear to me if you are working with sapscript or smartforms.
    You have only to find a variable which identifies the kind of invoice
    I do not know that variable so i use an example variable
    for sapscript:
    /: IF &VBDKR-FKTYP& = '1'
    /  INVOICE
    /: ELSE
    /  SERVICE ORDER
    /: ENDIF.
    In a smartform you can also do something like that.
    but There you work with conditions (eq, BOOLEAN)
    You have only to find the right variable
    success,
    Gr., Frank

  • Plant  Maintenance  order and  service  order

    Hi  ,
      Please  let me  know  When  we  come  Plant Main  order  and  Service  order.
    Thanks

    hi:
    Customer Service is linked to Plant Maintenance module of SAP.  Technically speaking SM/CS isn't a module.  Primarily it uses parts of the PM and SD modules.
    The PM module is used mainly for eqiopment, functional location, order, notifications, maintenance plans, etc (same as PM).
    The SD module is used for billing, contracts, sales orders, etc.
    The main interface between the PM and SD module is called Resource Related Billing (DP80, DP90, etc).
    The Customer Service have a lot of  process one of them is:
    Create the notification IW51 -> create de Service Order -> create Quotation DP80 -> Modification Service Order IW32 Accept the Quotation once accept the system create automatic the sales order to copy of quotation -> and billing the sales order VF01.
    Other process is:
    Create the Notification IW51 -> create de Sales order -> and billing the sales order VF01.
    Other Process is:
    Create the notification IW51 -> create de Service Order -> create the sales order DP90 -> and billing the sales order VF01.
    Other Process is:
    Create a contract type WV VA41 -> create de Service Order -> create the sales order DP90 -> and billing the sales order  or contract VF01.
    Or
    Create a sales order RA or RAS VA02 -> create de Service Order -> create the sales order DP90 -> and billing the sales order  or contract VF01
    Regards
    Shashi

  • Delta update for Cube :  0CRM_PRI  - Service Orders and Confirmations: Item

    Dear experts,
    For Cube : 0CRM_PRI  - Service Orders and Confirmations: Item
    Source data is from Two ODS 
       1. Confirmations (Item Data)  : 0CRM_CNFI and
       2. Service Orders: Item Data : 0CRM_PROI
    I have done Init upload to this cube from both this ODS.
    I am not getting delta option to this.
    When I am trying update Delta after init from ODS message is No new deltas in DataStore object 0CRM_PROI for update. No delta option available . It is showing  Initial and Full Update option only.
    How i can initiate delta option for this Cube ?  Please update us.
    Thanks in advance.
    Regards,

    Hi,
    you can use DTP's to laod data from ODS to cube .. it will take deltas ..
    With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred. The data transfer process controls delta handling and therefore allows you to fill several targets with different deltas from one source. With a data transfer process, you do not need to explicitly initialize the delta method as you do when copying data with an InfoPackage.
    or you can create a sepeate Ip for delta apart form full and init .. that will laod delat data in cube ..
    Regards,
    shikha

  • Contract , scheduling agreement and service order

    Hi all,
          Can anybody tell me about the contract scheduling  agreement and when we can suggest our client to go for schedule or contract agreement ?
    Pls tell me elaborately .
    Also Pls explain me about service order and when can i go for service order . whether it is restricted to AMC ?
    Pls explain me elaborately.
    pls explain me steps for creating contract or scheduling agreement and service order..........................
    points to be rewarded.
    Regards,
    Girish.

    Hi,
    Contract is outline purchasing agreement where you have a contract with the vendor,may be a for a predetermined quantity or predefined value. So everytime you need the matl,  you need to make PO ref the contract asking for the delivery of the matl. In such instance when PO is ref with contract its called contract release orders or call off orders. So Process are ME01, ME11, ME31K with aggnrement type, ME51,ME21 & MIGO,
    Scheduling agreement is a long term purchase agreement, where you will keep issuing the delivery schedules whenever there is a change in requirement or at predetermined time intervals. The delivery schedule can be on hour/daily/weekly/monthly basis. SA is also an agreement with the vendor for the supply of matl, may be a quanity or value. The delivery dates will be maintained in ME38 ref the SA which are called delivery schedules.So you can maintain the delivery schedule and communicate the vendor on Forecase basis or JIT basis. And when you need some more matl then will only create SA deliveries using ME38. SA could be of 2 types:- without release documentation-system will transmit the delivery info to the vendor once you save the document.
    With release documentation- after creating the delivery schedules you need to create SA release using ME84.So Process are ME01, ME11, ME31K with aggnrement type, ME38 & MIGO,
    Service order or service PO is created with item Category "D" and an account assignment category as per ur requirement. U can not enter ur material here only u have to maintain short text of material. Example: You want to clean the boiler and u given contract to your Vendor. Vendor sends quotation mentioning that Rs.100/hr/Man head. Now how you will measure the cleaning activities of furnace? You can pay to contractor based on the hourly basis/ man head spent in cleaning activities. So in this case create the Purchase Order mentioning "Cleaning" in the short text in Item overview(Acc assignment ' K' or “C” or “P” and Item category 'D) and item details " Man Head" Service No , Gross price - Rs.100.00 and unit - hour ( or pick from Service master) and Quantity-number of hours spent by all man head.
    The steps to create Service PO are:
    1) Maintain Item Category as D & account assignment such as cost center “K”or slaes order”C”
    2) Keep material code field blank.
    3) Enter description of service & other fields in the PO Item Overview level. Press Enter.
    4) System will prompt you to maintain services at Item Level. Maintain your service master number / service description & other fields (quantity / rate /)
    5) Save the PO.
    For more follow the links;
    For more follow the link;
    http://esoadocu.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=EB65A89F1AFD4C46AB61C6161BAF
    http://www.sap-img.com/sap-sd/sap-sd-scheduling-agreement-vs-contract.htm
    http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/contracting/file1499/index.htm
    http://www.sap-img.com/materials/what-is-outline-and-scheduling-agreement.htm
    Regards,
    Biju K

  • How are contract and service order related....urgent

    Hi all
    I am ABAP consultant...
    I am working on Service contract Cost Management threshold alert report...
    I want clear idea as to how are contract and service order related....
    BAsed on contract type and contract start and ,end date,sold to party....
    i need to get contract ,item , service order no: , and i have to calculate <b>INTERNAL ,EXTERNAL LABOUR, INTERNAL,EXTERNAL material COST</b>
    plz help me out...
    Thanks in advance,
    Madhavi.

    Dear Madhavi,
    http://www.erpgenie.com/abap/tables_sd.htm
    VBFA Sales Document Flow
    KONV Conditions for Transaction Data
    KONP Conditions for Items
    LIKP Delivery Header Data
    LIPS Delivery: Item data
    VBAK Sales Document: Header Data
    VBAP Sales Document: Item Data
    VBBE Sales Requirements: Individual Records
    VBEH Schedule line history
    VBEP Sales Document: Schedule Line Data
    VBLB Sales document: Release order data
    VBLK SD Document: Delivery Note Header
    VBPA Sales Document: Partner
    VBRK Billing: Header Data
    VBRP Billing: Item Data
    VBUK Sales Document: Header Status and Administrative Data
    VBUP Sales Document: Item Status
    VEKP Handling Unit - Header Table
    VEPO Packing: Handling Unit Item (Contents)
    VEPVG Delivery Due Index
    Also, go through:
    http://www.erpgenie.com/abap/tables.htm
    Regards,
    Naveen.

  • Idoc for materials and service for same contract.

    Dear All
       I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01  and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
    Regards
    Somnath

    Hi,
    It is not clear to me if you are working with sapscript or smartforms.
    You have only to find a variable which identifies the kind of invoice
    I do not know that variable so i use an example variable
    for sapscript:
    /: IF &VBDKR-FKTYP& = '1'
    /  INVOICE
    /: ELSE
    /  SERVICE ORDER
    /: ENDIF.
    In a smartform you can also do something like that.
    but There you work with conditions (eq, BOOLEAN)
    You have only to find the right variable
    success,
    Gr., Frank

  • Problem with sales order and Service order

    Dear Guru's
    We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
    Thanks and Regards,
    Deethya.

    CLOSED

  • Service prod in service contract and service order thro RRB!

    Hi,
    I have service contract with service product say Rep_service with 1 Hr rate as 100 USD in place for a particular equipment with serial number.
    I have received a complaint now I am raising a service order SM01 service order with contract
    I have maintained the same equipment number in the Service order as in service contract
    and selected the service contract too.
    i have operations and material consumption for service order.
    When I run  DP90 RRB the material determined is Service (different service product) based on my DIP profile, (should I maintain the same service product in DIP profile as in service contract or any other service prod can be maintained). What happens to this billing document generated from DP90?
    And my service order settles to service contract.
    I think when service contract is in place then to generate billing I will use only service contract as reference.
    Please suggest me how to go about it.
    Kindly if possible give me some link to documents.
    Regards,
    N.Nagaraju

    Hi Nagaraju,
    First of all, you can bill Service Contract and Service Order differently. This is because you may wish to charge contract fees irrespective of whether service occurs or not.
    Secondly, while maintaining DIP profile, you can use different material from the one used in contract. Just make sure that it gives explanation as to what service was performed so that customer will understand the invoice.
    DP90 will generate Debit memo request. You will need to create billing document against this using VF01.
    When you settle the service order (KO88), it will be settled against service contract.
    Please let me know if you need any further information.
    Regards,
    Aaditya.

  • Service Notification and service order in ISU

    Dear's
    I want to know that how to configure Service notification and service order in ISU and in ISU their is any posibility if i put a note with meter reading the notification is auto genrate?
    Witing for your positive responce
    Regards,
    Syed Zahoor Ahmed

    Check out [Work Management Help for ISU|http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dc955eafc11d18a030000e829fbbd/frameset.htm].
    Then you can go to your sandbox SPRO and try the configuration.
    For note question, I am not sure whether I understand it correctly. If you want to automatically create MR from the note that you put in notification. There is not configuration for that. you need an enhancement.
    Chaiphon

  • Total actual cost for a given PM Order

    hello all,
    how do i get total actual cost for a given PM order (in IW33 under cost tab we have total actual cost)..
    is stored in table or do i need to use any function module.....
    thanks in advance....

    Hi Vinay,
    You can use the following logic for extracting the Actual cost of a PM order.
    Pass the Order No (AUFNR) in Table AUFK and fetch the Object number (OBJNR).
    Pass OBJNR value in table COEP.
    You can get the actual cost of the order in COEP table.
    Please mark this as correct if it resolves your issue.
    Regards,
    Joydeep

  • Archive service notification and service orders

    Hello
    We need to remove few service notification and service orders from the system.These were created by mistake and now we want to remove those orders and notificaiton from the system
    Please explain with required transactions.
    Regards
    Santosh

    Check preconditions for archiving notification :
    1) The notification has been marked as u201Ccompletedu201D in Change Notification.
    To archive notifications, go to transaction SARA. The archiving object for Notification is NM_QMEL.
    Click on the Write button in the initial screen of Archive Administration to start an archive session of archiving notifications.
    RQARCNMA u2013 Archive Notifications
    RQARCNMD u2013 Delete Notifications
    hope that your problem will be solved.

  • Schedule for Maintenance and Support

    When do you expect to be at a point where you set product price and maintenance cost?
    Also, I assume that you will give existing MATRIXx customers a 'grace period' during which we can secure funds to resume paying for maintenance and support, right? I would expect something like 90 to 120 days in the grace period.
    Thanks.

    Michael -
    We are currently finalizing our price list, which will include product prices, maintenance, and all of NI's policies concerning maintenance and support.
    When this list is complete, it will be posted to ni.com/matrixx. Please check back for that information and all other updates, as they will be posted there as well. You can anticipate the new price list within the next two weeks.
    Regards,
    Greg Wempe
    Product Manager for MATRIXx
    National Instruments

  • Proceeding without standard costing for May08 and June08

    Hi,
    We have implemented Material Ledger here.
    The backlogs are on.
    We are still on May08 backlogs.
    We had to proceed without standard costing for May and now also for June which we would be able to finish by July 20th.
    After that we will be doing the standard costing run for July 2008 by 22nd July.
    I dont think we neeed to calculate and settle variances for May and June 2008.
    Please guide.
    Could you please guide me on what precautions that need to be taken.
    Also, when I do the actual costing (ML) run for July in August 2008, I think only the variances for July will be calculated and settled.
    Any material Ledger experts, please advise and guide.
    regards,
    Nidhi

    Hi Elaine,
    Thanks a lot for your reply.
    You are absolutely right.
    The system will not allow me to close July in ML, unless I have closed May and June.
    Also, the second option is completely ruled out. Every material has to be included in the ML run.
    For carrying out ML closing activities for previous posting periods, the note no. 361236 would help. Please advise.
    Also, Elaine, I am noticing that despite the fact that we did not do the standard costing run for May 2008, the system is using the standard cost estimate of April 2008 to calculate all variances.
    I checked the costs analysis of all process orders and the system is correctly calculating the variances for all process orders.
    So please suggest if the steps I am mentioning below are correct:
    May 2008:
    I will first calculate production variance using T code KKS1
    Then settle the production variance using: CO88
    Then I will carry out ML run for May using: CKMLCP
    May closes in Material Ledger
    June 2008:
    I will first calculate production variance using T code KKS1
    Then settle the production varinace using: CO88
    Then I will carry out ML run for June using: CKMLCP
    June closes in Material Ledger
    Then I will do the standard costing run for July 2008.
    (Also please note that we closed May and opened June in MM using MMPV, because one region is still in May backlogs while the other has started June backlogs. So the current period in MM is June and previous period is May 2008. This I guess should not have any impact on the ML run for May 2008)
    Please guide me with possible reconstruction of steps.
    Thanks a lot & regards,
    Nidhi

  • Release strategyu for contracts and purchase order

    Hi,
    My client want both contracts and release orders (purchase order created w.r.t contract) must to go to release approval before procuring the material or service.
    Is it possible to configure seperate release strategies for contact and purchase order?
    Please let me know.
    Thanks in advance.
    Regards
    Kishore.

    Hi,
    Thanks for your replies.
    Characters for contract will be
    1. Company code
    2. Aggreement type
    3. Target value
    4. Purchase group
    Characters for Purchase order will be
    1. Company code
    2. Dodument type
    3. Net value + VAT(Gross value)
    4. Purchase group
    BASED ON THE ABOVE CRITERIA, PLEASE LET ME KNOW HOW TO CONFIGURE. Release strategy for purchase orders already existing in the system as mentioned above as per the mentioned characteristics. Now i need to configure for contracts only.
    Please help me in this regard.
    Regards
    Kishore.
    Edited by: Jyothula Kishore on Feb 2, 2010 7:37 AM
    Edited by: Jyothula Kishore on Feb 2, 2010 12:01 PM

Maybe you are looking for